Error when building App but no error code displayed

When attempting to build an LabVIEW 8.01 App I receive an error message with no error code. The message says the error occured in the top level VI. No suggestions for possible cause.

Was there any further text available if you expanded the Details section of that error message? You might consider opening up CRAD GUI MAIN.vi and doing a force recompile of all the VIs to make sure there aren't any compilation errors present. You can force recompile a VI by holding down Ctrl and pressing the run arrow. You can force recompile a VI and all of its subVIs down the chain by holding down Ctrl+Shift and pressing the run arrow.
Does doing this break the run arrow?
Jarrod S.
National Instruments

Similar Messages

Apple ID has been verified but getting ID/password error when downloading app

Apple ID has been verified on Apple ID site - but getting ID/password error when downloading app.

Hi Wantedhelp,
Welcome to the Support Communities! If you are having trouble logging in to the App store on your iPad, I would first suggest you restart the device.
Then go to My Apple ID (appleid.apple.com), click “Manage your Apple ID,” and try to sign in with your Apple ID. If you are unable to sign in, follow the steps provided there to reset your Apple ID account password.
Then in the iTunes & App Store settings, sign out of your account, sign back in and try to purchase or redownload the app again.
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store - Apple Support
http://support.apple.com/en-us/HT201248
If you need additional help with your Apple ID, contact the Apple ID Security team:
Contact Apple for help with Apple ID account security - Apple Support
http://support.apple.com/en-us/HT5699
I hope this information helps ....
- Judy

Error when building application with Excel included

Hi All !
I've read several post on problems with Report Generation Toolkit when building applications that uses Excel or Word interactivity.
I've included both _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi in my project and added them to the dynamic vis and support files.
When building I get the error :
The VI is broken. Open the VI in LabVIEW and fix the errors.
C:\Programmer\National Instruments\LabVIEW 8.2\vi.lib\addons\_office\_exclsub.llb\_Excel Dynamic VIs.vi
When opening that VI there is no broken arrow and all the vi's included in this is not broken either.
I've tried mass compiling and so on but so far luck.
Regards Morten Kahr
Regards Kahr
Certified LabVIEW Architect
CIM A/S

If you do a search on this forum you will find this to be a common and vexing problem. I myself had this same exact problem about a year ago, and it took me the better part of a day to track it down. As you will find by reading the various threads on this problem, there seems to be no specific cause for this, and it remains a mystery, and the solutions are no better than chanting voodoo, and probably just as effective.
One thing you can try is to force a recompile of your VI hierarchy. Open you top-level VI. If it's set up to run when opened, stop it. Hold down the Control key and click the run button. This will force a recompile of the application. Sometimes this works, sometimes it doesn't. Like I said, voodoo.
Another thing to look for is to check if you are using any diagram disable structures or case structures with a constant wired, as in trying to use the case structure to comment out code.
Are you using classes and passing by reference? There was a mention of this here.

Icon path restricted error when building release version for ipad3

Hi,
i get the following error when building the release build ipa file for ipad 3: "The path icon.png is restricted. If you were trying to package Icon.png you should correct the case." In debug mode everything works. My icon is under assets folder and added in the app-xml with:
<icon>
<image72x72>assets/icon_72.png</image72x72>
</icon>
Did I missed something in configuration? Seems to be that the problem is known but cant find a solution for it. If i try to packegae per command line despite the fact building works I could not install the app. When I change the icon tag to use no icon everything works fine. Any ideas?
Greetz and thanks in advance!

I solved it. When you export the release build you can choose package contents to be compiled in the ipa. When I tried to add an icon at first I named it icon.png, which seems to be a reserved name. The configuration to include this icon.png was still saved though i deleted it. Wired... After unchecking the ceckbox for icon.png not to be compiled in the ipa, the release build was build.

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple s

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.

I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.

Error When building ess/tra/tre and ess/tra/tre/trs DC's

I had customized the ess/tra/tre and ess/tra/tre/trs DC's and had them working, but I do not know what I did or what happened that am now getting the following errors when building, can anyone help tell what the problem could be?
Error
-     The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.xss.tra.model.openccmodel.OVSOpenCostcenterModel. Fix the classpath then try rebuilding this project.
-     HDI_HNS15.02_Desstratresap.com
Error
-     This compilation unit indirectly references the missing type com.sap.xss.tra.model.openccmodel.OVSOpenCostcenterModel (typically some required class file is referencing a type outside the classpath)
-      InternalVcTreReview.java
-      HDI_HNS15.02_Desstratresap.com/gen_wdp/packages/com/sap/xss/tra/tre/vc/review/wdp
-     line 0

For anyone who might need to know, I managed to fix this by adding tra to the required projects on the build path. On the Navigator View, right click -> Properties -> Java Build Path -> Projects tab -> check dependant project.

I am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

sorry i was typing fast and didnt check spelling and stuff

IR webclient: error when uncompressing data retrieved: *Data Error*!

A small (?) number of IR webclient 931 installations we notice the next error when processing: " error when uncompressing data retrieved: *Data Error*! " It does not seem to be user or permission/provision related.
Does anyone have an idea how to solve it. Reinstalling the IR webclient does not solve it.

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

IRWebclient: error when uncompressing data retrieved: *Data Error*!

We experience a sporadic "error when uncompressing data retrieved: *Data Error*!" while processing a query with IR webclient 931. The problem occurs on several webclients but on other desktops it does not. The IHTML processes fine.
Any one an idea? reinstalling interactive webclient on the same pc does not help.
Completely reinstall the pc (os and other client software including interactive webclient) does help.

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

No syntax error on syntax check, but syntax error on activation

Hi all,
I have a confusing problem.
I want to default some values on item level of purchase order (ME21N). I added a module call in flow logic of screen 1313 of program SAPLMEGUI. The module itself I added to include LMEVIEWSF01. Here I default some fields of structure MEPO1313. This structure is defined in TOP-include using TABLES.
Before modification I debugged the transaction and found out, that structure MEPO1313 is accessible during PBO. Changes in debugger are shown as expected on screen.
Now, syntax check on LMEVIEWSF01 and even on SAPLMEGUI returns no error. But on activation I get syntax error saying MEPO1313 is not know ??
So, structure MEPO1313 is accessible in debugger, no syntax error on syntax-check, but syntax error on activation ?
What is going on ??
Elko

go to SE80 and Check syantax at package level.
you might be checking syantax for other include and problem si somw ehere else, justa thought.

Why do I get 'ResolveManifestFiles task failed' error when building a WPF app that references WinRT API?

0
down vote
favorite
I am working on a WPF app that I want to create for Windows 8. I followed steps mentioned in
Hansleman's blog to make some manual modifications using WinRT functions in a WPF app. Everything worked well, until I tried to publish the app. When I clicked on publishing the app I got error "The 'ResolveManifestFiles' task failed unexpectedly.
System.ArgumentException: Value does not fall within the expected range."
Afterwards, it will produce the same error when attempting a simple solution build.
Even if you create a simple WPF project and add the references mentioned in blog to access WinRT functions and publish, this issue can be reproduced.
I think it would be common scenario to call WinRT functions from WPF and someone should have done it. Is anyone aware what should be done to fix this issue?

I am having the same problems and came across this article while researching a workaround.
It is surprising more people aren’t talking about this.
Here are the steps to reproduce the problem; Using Visual Studio Express 2012 (x64) create a new VB Windows Forms Application.
Unload the project and edit the [ProjName].vbproj in the solution explorer.
Add <TargetPlatformVersion>8.0</TargetPlatformVersion> to the <PropertyGroup>.
Save and reload the project. In Add Resource/Reference Manager add the Windows.minmd found under Windows/Core.
This WinRT/Desktop solution will run as expected. Now try to Publish this solution.
It will FAIL with the following ERROR; “The ResolveManifestFiles task failed unexpectedly, Value does not fall within the expected range.”
Attempting to build or run the solution again now will fail with the same Error.
The only way to build the project now is to remove the “Enable ClickOnce security settings” option under the project properties Security settings.
Occasionally using this trick, the solution will build but not run.
When that happens jiggle around with Debug/Release Solution Configurations and the Any CPU/x64 Solution Platforms then rebuild and try the run again.
This fussing around will get you through development however any attempt to publish with restore the ClickOnce security setting and create the previous Error.
The first question here is how do you publish a WinRT app for the desktop with VS2012 Express.
Then secondly, if that is not possible can we publish this Express solution with a 3rd party deployment tool like InstallShield Limited Edition or the WIX Toolset.
Neither however seems functional in a VS Express environment.
Then thirdly, are there ways to access hardware sensor devices from a desktop solution without resorting to the WinRT API.
Any ideas or new research directions would be greatly appreciated.

Error when building the Java pricing userexit manual code

I went throught the manual for the pricing userexit manual... it tells you to ignore the errors when you do an ant build but I want to remove all the errors since they dont let the rest the code compile.... where are the jars for these errors:
[javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:16: package com.sap.vmc.logging does not exist
     [javadoc] import com.sap.vmc.logging.Category;
     [javadoc]                            ^
     [javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:26: cannot resolve symbol
     [javadoc] symbol : class Category
     [javadoc] location: class com.sap.spc.document.DocumentConstants
     [javadoc]     public static final Category CATEGORY = Category.getCategory(Category.APPLICATIONS, "/AP/SPC/Document");
     [javadoc]                         ^

See the [SAP note 809820 - Userexit concept for pricing|https://service.sap.com/sap/support/notes/809820]
Use ZIP file the attached to the above note - PRC_UE_CUSTOMER_V105.zip
ZIP file contains an Eclipse .project file that has the required build path. If you read the documents carefully, it does refer this project file.
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
     <classpathentry kind="src" path="src"/>
     <classpathentry sourcepath="lib_src/src" kind="lib" path="lib_api"/>
     <classpathentry kind="lib" path="lib_vmc_api/base_services_stripped_api.jar"/>
     <classpathentry kind="output" path="bin"/>
</classpath>
Again read the documents thoroughly. They are neither fictions nor non-fictions, but technical documents written with care. So, we must also read them with care. If we don't follow them, then it is time to engage someone who does. )
BTW, coming back to the Java basics - One must have a class and source files to debug. You won't get a class file unless it is compiled. The Java file won't compile correctly if it has syntax / reference errors. Unfortunately or fortunately, all these apply to the IPC java userexit development as well.
Easwar Ram

Fighting linker errors when building Qt app manually

Hi all,
some time I was using Qt and building apps in IDE (Code::Blocks). Now I need to find a way to build manually - an app must be built on a machine without IDE or anything similar. I followed official manual, but project failed at linking. I'm now using test project, it consists of two files, and still fails:
main.cpp:
#include <QApplication>
#include "header.hpp"
int main(int argc, char* argv[])
QApplication app(argc, argv);
TestClass asdf(0);
asdf.show();
return app.exec();
header.hpp:
#include <QWidget>
#include <QtGui>
class TestClass : public QWidget
Q_OBJECT
public:
TestClass(QWidget* parent);
protected:
void paintEvent(QPaintEvent* event);
TestClass::TestClass(QWidget* parent) : QWidget(parent)
setWindowTitle( tr("Testing window") );
resize(200, 200);
void TestClass::paintEvent(QPaintEvent* event)
QPainter ps(this);
ps.drawLine(10, 10, 100, 100);
Then I ran qmake -project; qmake test1.pro; make. The following error occured:
moc_header.o: In function `TestClass::paintEvent(QPaintEvent*)':
moc_header.cpp:(.text+0x80): multiple definition of `TestClass::paintEvent(QPaintEvent*)'
main.o:main.cpp:(.text+0xc0): first defined here
moc_header.o: In function `TestClass::TestClass(QWidget*)':
moc_header.cpp:(.text+0xf0): multiple definition of `TestClass::TestClass(QWidget*)'
main.o:main.cpp:(.text+0x0): first defined here
moc_header.o: In function `TestClass::TestClass(QWidget*)':
moc_header.cpp:(.text+0xf0): multiple definition of `TestClass::TestClass(QWidget*)'
main.o:main.cpp:(.text+0x0): first defined here
collect2: ld returned 1 exit status
make: *** [test1] Error 1
It generated the following test1.pro:
# Automatically generated by qmake (2.01a) Fri Sep 10 16:42:10 2010
TEMPLATE = app
TARGET =
DEPENDPATH += .
INCLUDEPATH += .
# Input
HEADERS += header.hpp
SOURCES += main.cpp
It's quite strange since in Code::Blocks it builds flawlessly. Is it error in code, or configs need to be corrected?

falconindy wrote:Add #include guards to header.hpp
Include guards made nothing. Still the same error.
stqn wrote:
I don't know why it builds in Code::Blocks, but I would do as the error message suggests and move the functions definitions from the header to a cpp file.
Or move them into the class declaration.
It solved the problem, but I simply can't understand, why definitions in header are causing an error. Basically it is correct, since in C99 aren't any rule rejecting it, only a recommendation. E.g., Boost is made the same way - definitions are put in headers.

Error 10 when building app with Report Generation _wordsub.llb in the project.

Error 10 occurred at ABAPI Dist Copy Non-VI Files.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> SDBEP_Invoke_Build_Engine.vi -> SDBUIP_Build_Invoke.vi -> SDBUIP_Build_Rule_Editor.vi -> SDBUIP_Item_OnDoProperties.vi -> SDBUIP_Item_OnDoProperties.vi.ProxyCaller
This is the error I get when a set up _wordsub.llb to use of report generation in a build project.

Dave,
thanks for providing me with this information. I didn't hear about this error in the past, but I found a KB, that possibly can help you debugging the application: http://digital.ni.com/public.nsf/websearch/AF12BB5FAC27FE2186256F9400619C84?OpenDocument
Let me know, if it helped you out
Stefan
Impossible is nothing - nothing is impossible

Error when building App but no error code displayed

Similar Messages

Maybe you are looking for