Error when changing BPM: "Insufficient access privileges"

Hello, Logic Express gurus:
I am just a lowly fitness instructor trying to mix her own music (self taught DJ). When changing the BPM here's what I do:
I double click on the song track, then from the window that pops up, I click on the "Factory" pull down menu, then choose "Temp and Pitch Machine". When I change the BPM to the desired tempo and click "Process & Paste", I get the following error:
"Insufficient access privileges for operation (Result code -5000)", then another error stating:
"Error when creating temp file!"
It used to work beautifully. Can anyone assist me? Thanks.

Thanks for the reply, Matt. I tried your suggestion, but it did not make a difference in the tempo. I am bringing in MPEGs, by the way.
My method was working fine until I began getting this error message. Any further suggestions from you or anyone?

Similar Messages

Error -5000 Insufficient Access Privileges - Can anyone help?

Hi, I have been using logic since version 4.1 and have never had this problem. About 50% of the files I import or audio I record have problems when using the Audio editor in logic.. I can't do simple things like Normalize, Fade in/out/, Gain, Time & Pitch etc... All i keep getting back is 'Error -5000 Insufficient Access Privileges For Operation'. I've checked the files are on read & write however I cannot figure out why it will not let me do anything to the audio.. Any advice appreciated! Kai P.S I've updated to the latest Version of Logic Pro 7.2

You should run "repair permissions" for your hard drives.
Check the Apple Help manual on exactly how to do this,it's not hard to do.
This is not a Logic Issue,but a file management issue...Access privileges is a term to describe what access level you have on each file on your computer.If you don't have write access,you cannot edit the file.
I hope this helps,
noeqplease

"Insufficient access privileges for operation" Export Error

I have been working on a very important project in iMovie 09 and I went to go export it into quicktime format, and I get an error that says "The movie could not be exported because an error occurred. (Insufficient access privileges for operation )"
I have the video files on an external drive, and I know based on the error message that it has something to do with the privileges of the video files. I just don't know how to fix it. Hopefully you can help!
Thanks

This may not be your problem, but you may want to check. By default, permissions are ignored on external volumes. Select the external volume with your video files on it and go to File --> Get Info. At the bottom of that window, make sure that "Ignore ownership on this volume" is checked. If it is not, check it. (You may have to click the "lock" and supply your administrator password first.)
If it is checked, then the conflict is with some other file(s), in which case, someone else will have to help you with that.

"insufficient access privileges"?

My computer claims "insufficient access privileges" when I try to play certain songs I have purchased. These files corrupt or something, and then never play at all, or never play all the way through again. It just happened to a song I JUST bought, it wouldn't play even once!
I can try to redownload it, but it then says the computer is not authorized (it is). When I type in my password to re-authorize it, it tells me this computer is already authorized (duh)... then I try to play it and the loop continues.
It's so frustrating, I a paying for songs then not allowed to listen to them! What's up with this?

Locate the file in the Finder and choose Get Info from the File menu. Under Ownership & Permissions, change the settings so that you have Read & Write access to it. If it is listed as a folder or package in the Get Info window, you may need to apply the permissions to enclosed items as well.
(19150)

Insufficient access privileges for operation Logic Pro

What means "Insufficient access privileges for operation" when I try to open a *.logic file in a new track?

Is it a project file or template you are trying to save? The Autoload song? I'm no guru or anything, but try saving it in a totally different location, specifically, within your user domain or the Macintosh HD domain--maybe one or the other will allow you to save (for example, if you are currently trying to save your song in a place within your user domain, instead make a folder in Macintosh HD for all your Logic songs, etc.) If you keep Logic songs in the Library->Application Support->Logic folder, either in the user or HD library, that folder can be temperamental anyway. Actually, the less complicated your song and audio file's locations are, you might get an edge in application performance.
OK, finally, try running this nifty new program (it's really more like an automation script), "Maintenance 3.7" (http://www.apple.com/downloads/macosx/automator/maintenance.html). It may repair errors in permissions, etc.
Maybe that stuff will work and someone wiser than I will respond to your post!
Good luck!
Best,
Tim

Error when I try to access my yahoo mailbox

I am using JavaMail for accesing my yahoo mailbox.
I get the following error when I try to access my mailbox
Exception :: javax.mail.AuthenticationFailedException: Error logging in.
Session session = Session.getInstance(properties,new Authenticator()
                              public PasswordAuthentication getPasswordAuthentication()
                                   String username = getUser();
                                   String password = getPassword();
                                   return new PasswordAuthentication(username,password);
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
please any one help me.
i thinked error problem in
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
any of this lines.
please tell ur sugestions.
thanks in advance.

try it.
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "myserver.smtphost.com";
private static final String SMTP_AUTH_USER = "myusername";
private static final String SMTP_AUTH_PWD = "mypwd";
private static final String emailMsgTxt      = "a message.";
private static final String emailSubjectTxt = "a subject";
private static final String emailFromAddress = "[email protected]";
// Add List of Email address to who email needs to be sent to
private static final String[] emailList = {"[email protected]", "[email protected]"};
public static void main(String args[]) throws Exception
    SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
    smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
    System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
                            String message , String from) throws MessagingException
    boolean debug = false;
     //Set the host smtp address
     Properties props = new Properties();
     props.put("mail.smtp.host", SMTP_HOST_NAME);
     props.put("mail.smtp.auth", "true");
    Authenticator auth = new SMTPAuthenticator();
    Session session = Session.getDefaultInstance(props, auth);
    session.setDebug(debug);
    // create a message
    Message msg = new MimeMessage(session);
    // set the from and to address
    InternetAddress addressFrom = new InternetAddress(from);
    msg.setFrom(addressFrom);
    InternetAddress[] addressTo = new InternetAddress[recipients.length];
    for (int i = 0; i < recipients.length; i++)
        addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
* SimpleAuthenticator is used to do simple authentication
* when the SMTP server requires it.
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);

"Code -5000--- "insufficient access privileges for operation"

I use a M-Audio Ozonic, Digidesign Mbox, and a BCF2000 logic control.
Whenever I try to initiate an audio recording, this message pops up
"Insufficient access privileges for operation
Result code = -5000"
Has anyone encountered this. This is a new issue. has never happened before.
17" iMac G5 1.6 Ghz Mac OS X (10.4.7) 2 GB RAM w/ Logic express 7, Garageband, ProTools 6.4 LE w/ software bundle & Mbox. Ozonic, BCF2000

Did you upgrade os x or create a new user?
Select the folder icon here you save your audio projects and type Command I to open the information panel, then verify if you are the owner of the disk and if you have read/write permissions.
cheers
rob

Import refused from file: "Insufficient access privileges"

Trying to import file into iMovie 09, get dialog: "(Insufficient access privileges for operation )"
Anyone know what that might mean?

I believe JVT is not a supported format in iMovie.
If you have QuickTime Pro, transcode your file by exporting and choosing the following settings:
1. File/Export
2. in Export choose "Movie to QuickTime Movie
3. Click Options
4. In Movie Settings for Video Choose AIC (Apple Intermediate Codec)
5. Size: 1280x720
6. Sound Settings: Format Linear PCM - Channel Stereo (but your file is mono... so I guess leave it at that) - Quality: Normal - Linear PCM Settings: Sample Size: 16 - Little Endian
After you exported this file, import it to iMovie '09.
(JVT, Joint Video Team was created by the union of two groups the ITU group taht started by creating H.26L back in the 90s and the MPEG group.)

I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

"You can add the PATH enviromental variable in Control Panel> System> Advanced System Settings.
Alternatively, I was successful just copying the QTMovieWin.dll from c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
See in: https://discussions.apple.com/thread/5252205?start=15&tstart=0

Cannot sync, error message reads" not enough access privileges for this operation

When trying to sync my ipad and iphone with my PC i get this error message "Cannot be sybced. You do not have enough access privileges for this operation". I have a new PC but i have successfully synced these devices before. can anybody please help ?

Just thought I'd put out an update on my problem. It has been solved. I spoke to a tech at Apple at 1-800-275-2279. She had me try a few things that didn't help. Her last suggestion was to uninstall QuickTime and iTunes then reload. She sent me the uninstall instructions at http://www.info.apple.com/kbnum/n93698 which I followed. When speaking to her I told her I was afraid to do this because I saw other people on the discussion board who tried this and lost all of their music. She assured me that that wouldn't happen. I did the uninstall then the install. (Just a note here, I also read on the message board that someone said that to cure this problem you should do the install then open up QuickTime before opening iTunes. I did this also but don't really know if it made a difference.
Bottom line is I uninstalled QuickTime and itunes per the instructions at the site shown above. I then installed both again from www.apple.com/itunes/download. After the download I ran the install and unchecked the box to let itunes start after the install. I then opened Quicktime then closed it. I then opened iTunes and all of my music was there and I didn't get the anoying "iTunes is not set as the default player" and the error after trying to set it. The problem described in my first posting of copying CD's is also gone. So beleive it or not, EVERYTHING is working just like it should. Some of the above steps might not be required but I would follow them step by step because I know they worked for me.

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

Why am I getting an URL error when iCal tries to access my google apps calendar?

My previously synced and normal google calendar for work was syncing fine with OSX's native Calendar app. Then I updated to to Mavericks, now my Calendar app is showing a URL error when trying to access my work calendar.
Our company uses a google apps business account, so our domain isn't gmail.com - in fact our domain acutally uses .asia.
Any ideas on how I can solve this? I've tried to re-link the account numerours times.....

same exact problem using vista

Inbound Processing : Error when changing a BOM

Hi Experts,
I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
Start processing in API: CSAP_MAT_BOM_MAINTAIN
Group BOM
Changes to the BOM exist after 03.11.2008
Date 03.11.2008 copied from change number
Item (1) 0040 L 000000001084237016 000000000000000000000000 cannot be uniquely identified
Item (3) 0100 L 000000001084237021 000000000000000000000000 cannot be uniquely identified
Item (6) 0200 L 000000000768041196 000000000000000000000000 cannot be uniquely identified
End of processing in API: CSAP_MAT_BOM_MAINTAIN
Any idea ?
Regards,
David

Hi Gordon,
I think I found something.
When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
Regards,
David

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Error when changing BPM: "Insufficient access privileges"

Similar Messages

Maybe you are looking for