Error when define Transparent table

Dear,
When I create a transparent table in ABAP Dictionary, after fill Short Description, Delivery and Maintenance tab, I switch to Fields tab.
When I fill the first field (e.g: name TEST), choose Data Element (e.g: S_CARR_ID) --> ABAP Dictionary recognize that: Data Type is CHAR, Length is 0, and Decimal Places is 0.
But, actually, S_CARR_ID has Data Type is CHAR, Length is 3.
So, ABAP dictionary notifies that Number of positions < minimum number (1) for data type CHAR. Then, I can't do anything except exit.
How to fix the problem

Hi Hannibal2011,
I do exactly what you've done. I.e I filled TEST field with data element S_CARR_ID, nothing happy SAP shows Data type char with 3 character.
I'm afraid that you define a Domain with fix value and forgot to fill 'No. Characters' in definition tab.
please check and reply if any issue.
regards,

Similar Messages

  • Error when defining successor of node in workflows

    Hi Experts,
    I am receiving an error which says "error when defining successor of node XYZ". However in my workflow template, this particular XYZ node does not exists.
    Also I found one entry in SWP_SUSPEN table for the main workflow. I tried to execute the report manually RSWWERRE. Still it did not work out.
    I also tried to use transaction SWF_ADM_SUSPEND. However my workitem is not showing in the list.
    Kindly help me in this issue.
    Thanks
    Gopal

    Hi,
    This problem occurs because the nodes system table with respect to workflow is not updated properly. I hope you might have deleted or changed the workflow design after this you need to update the index of the workflow template too.
    Follow the below steps
    1. Execute PFTC choose task type as Workflow template and open in change mode.
    2. On menu goto Addtional Data ---> Agent Assignment ---> Maintain
    3. Choose the workflow template ID and click on the icon on the application tool bar with Red and white colur (Football ) i am not sure I think you can try with CTRL + F11 but you hvae to update the index.
    After doing this Execute SWUD txn Check for the consistencies of the workflow template. if you do not find any error refresh the buffer and org environment.
    Even after doing all this stuff you still face the issue then generate a version  just simply insert a dummy step in the workflow activate and then delete the dummy step activate and refresh the buffer and org environment and try to execute.
    This error ususally occurs (upto my knowledge) if the nodes table of the workflow is not updated properly, So the above mentioned  ways are to deal with it.
    Regards
    Pavan

  • Error ODS activation - sql error when accessing a table.

    Hi,
    sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
    -RSMPC 128, datapacket 3 is wrong, with status number 9
    -RSMPC 131
    -RSDRO 108 - communcation error (sql error when accessing a table)
    In sm21>
    -sql error when accessing a table
    -The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was  
    either                                                      caught nor passed along using a RAISING clause, in the procedure <b>"UPDATE_ATAB"</b>   "(FORM)"                                                                    
    Since the caller of the procedure could not have expected this exception     
       to occur, the running program was terminated.                               
      The reason for the exception is:                                             
      The database system recognized that your last operation on the database      
      would have led to a deadlock.                                                
      Therefore, your transaction was rolled back                                  
      to avoid this.                                                                       
      ORACLE always terminates any transaction that would result in deadlock.      
      The other transactions involved in this potential deadlock                   
      are not affected by the termination.
    I have BW 3.5.
    Thank You very much.

    There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
    Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource.   You seem to indicate that you don't have this.
    Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
    You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
    You could be loading from two different datasources to the ODS at the same time.
    If any of these are true, I would look at bumping the INITRANS setting up.  Your DBA will probably need to do this for table and its indices.  There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered. 
    You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps. 
    Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
    Pizzaman

  • Internal error when accessing a table  -

    Hi,
    The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
    In DUMP its showing Internal error when accessing a table
    Error : DBIF_RSQL_SQL_ERROR
    I checed the size of the table its quite huge for the application.
    So there is no issue with table.
    Please advise what causes these sort of error.
    System is ECC 6.0
    With SQL server 8.0
    Regards,
    Thomas

    These are the system log i got it from SM21. For this error logs are as below
    Very High Priority error
    Details Page 2 Line 9 System Log: Local Analysis of onsaprp1                  1
    Time
    Type
    Nr
    Clt
    TCode
    Grp
    N
    Text
    15:43:09
    DIA
    009
    300
    AB
    0
    Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
    Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
    Details
    Recording at local and central time........................ 11.02.2011 15:43:09
    Task......
    Process
    User......
    Terminal
    Session
    TCode
    Program
    Cl
    Problem cl
    Package
    03084
    Dialog work process No. 009
    TOM
    1
    SAPMSSY1
    T
    Transaction Problem
    SABP
    Further details for this message type
    Module nam
    Line
    Error text
    absapsql
    0786
    HandleRsqlErrors
    Documentation for system log message AB 0 :
    The specified runtime error has occurred in the system.
    Parameter
    abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
    Technical details
    File
    Offset
    RecFm
    System log type
    Grp
    N
    variable message data
    119
    618840
    l
    Error (Module, Row)
    AB
    0
    HandleRsqlErrors                                    absapsql0786
    High Priority error
    Details Page 2 Line 18 System Log: Local Analysis of onsaprp1                 1
    Time
    Type
    Nr
    Clt
    TCode
    Grp
    N
    Text
    15:44:07
    DIA
    009
    300
    SMEN
    BZ
    Y
    Unexpected return value 8 when calling up
    Unexpected return value 8 when calling up
    Details
    Recording at local and central time........................ 11.02.2011 15:44:07
    Task......
    Process
    User......
    Terminal
    Session
    TCode
    Program
    Cl
    Problem cl
    Package
    03084
    Dialog work process No. 009
    TOM
    om-blr-l
    1
    SMEN
    SAPLSMTR_NAVIGATION
    K
    SAP Web AS Problem
    SBAC
    Further details for this message type
    Module nam
    Line
    Table Name
    Field Name
    dbrepolo
    172
    8
    Documentation for system log message BZ Y :
    When calling a function within the database interface, a return
    value which cannot be processed by the calling function was
    provided.
    Technical details
    File
    Offset
    RecFm
    System log type
    Grp
    N
    variable message data
    120
    11160
    h
    Database Error (Non-SQL)
    BZ
    Y
    8                                                   dbrepolo172
    Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
    Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM

  • SM58 : Internal error when accessing a table

    Hi there,
    We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
    can you help?
    Thanks.
    Regards,
    Thava

    Hi
    Have u checked this thread?
    problem in TRFC
    Error while executing Workflow: User is locked.
    /message/5804053#5804053 [original link is broken]
    Regards
    Sridhar Goli

  • ORA-00054 error when loading Oracle table using Data Services

    Hello,
    we are facing ORA-00054 error when loading Oracle table using BO Data services
    (Oracle 10g database, BODS Xi 3.2 SP3)
    Test Job performs
    1- truncate table
    2- load table (tested in standard and bulk load modes)
    Scenario when issue happens is:
    1- Run loading Job
    2- Job end in error for any Oracle data base error
    3- When re-running the same Job, Job fails with following error
         ORA-00054: resource busy and acquire with NOWAIT specified
    It seems after first failure, Oracle session for loading the table stays active and locks the table.
    To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
    Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
    Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
    Thanks in advance
    Paul-Marie

    the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
    Or
           AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
    This Problem Occurs when we select The Bulkloading Option in orclae  We also faced the same issue,Our admin has Killed the session. Then everything alright.

  • ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE

    제품 : AOL
    작성날짜 : 2003-04-07
    ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
    ================================================
    PURPOSE
    Problem Description
    sqlplus 에서 mfg_lookups table을 select할때,
    ORA-1722 Invalid number 에러발생
    Workaround
    Solution Description
    =======================================================
    CREATE OR REPLACE VIEW mfg_lookups(
    lookup_type,
    lookup_code,
    meaning,
    description,
    enabled_flag,
    start_date_active,
    end_date_active,
    created_by,
    creation_date,
    last_update_date,
    last_updated_by,
    last_update_login
    AS
    SELECT lv.lookup_type,
    TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
    lv.meaning,
    lv.description,
    lv.enabled_flag,
    lv.start_date_active,
    lv.end_date_active,
    lv.created_by,
    lv.creation_date,
    lv.last_update_date,
    lv.last_updated_by,
    lv.last_update_login
    FROM fnd_lookup_values lv
    WHERE lv.LANGUAGE = USERENV('LANG') AND
    lv.view_application_id = 700 AND
    lv.security_group_id =
    fnd_global.lookup_security_group(lv.lookup_type,
    lv.view_application_id)
    =================================================================
    MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
    방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
    이와 같은 에러를 발생한다.
    이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
    다시 등록하니 해결됨.
    Reference Documents
    -------------------

    Yes but this is a regular operation and the INSERT is the only opportunity.
    BTW, look at what else I have just found:
    INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
    OK.

  • Error when defining successor for node 0000000198

    Hello ,
    We are using leave request service on ESS portal.
    From last few days we are getting error like " Error when defining successor for node 0000000198   "
    All agents are assigned properly and also v have checked PFTC setting for Workflow.
    the method which are using is Synchrounous.
    this error is nt coming perticulary for one employee but it is coming for sick leave workflow.
    Please help
    thanks

    Hi,
    This is a binding issue between the workflow container and the task 
    container because we can see the text in the workflow container but 
    it is empty in the task container.
    Our proposed solution is to go into the Dev or QAS environment and 
    regenerate the binding between the workflow and this particular task. 
    We will test and if this works, this will resolve issue.

  • Error when defining successor for node

    Experts,
    We are having a problem with one of our workflows that keeps erroring whenever we try to complete it.  The error message states "Error when defining successor for node 0000000159".  This error does not occur in 4.6c environment and the workflow is working fine.  However, our team is in the process of upgrading to ECC 6.0 and the workflow is not working properly in that environment.  The workflow is designed for BO BUS2038 and the error occurs when we try to close all tasks and complete the workflow.  Can someone direct us to something that we can check, we've pretty much exhausted all our options?  Thanks.

    Hi Teferi,
    This problem occurs in ECC 6 when a step with Synchronous Task/Method does not have the Step executed outcome activated (this is allowed in 4.6C for synch task with terminating events). Check if your Task/method is synchronous.
    Cheers,
    Ramki Maley.

  • Syntax error not defined as table or projection view  or database view

    All,
    I have to select a Maintenance View V_tcurr when I do Select statement I am getting SYNTAX ERROR stating its not defined as table or projection view  or database view in Abap dictionary.
    Can you give me a hint, how do I select maintenance View in the select statement ?
    Any help will be highly appreciated.
    Thanks

    data: lt_TCURR TYPE TABLE OF TCURR.
    data: lv_TCURR TYPE  TCURR.
    SELECT * INTO TABLE lt_tcurr
      FROM TCURR.
    TCURR just has some extra fields that are exlcuded in the Maint View.

  • Error when copying a table

    SQL-developer 4 EA2
    When copying a table to a name which already exists (as a procedure) SQL-developer replies that the copy- process took place although it didn't.
    You do not get the error message ORA-00955 "name already exists"
    regards

    If the error is on your mac computer, launch Keynote, then click the word "keynote" beside the apple, and select to "provide Keynote feedback"
    If on an iOS device, go to www.apple.com/feedback and provide feedback from this web site

  • Java script error when using a "Table" component (jsc2)

    using a table component, I get a js errors, when lodiing the HTML page, sorting rows etc.
    can some one helpe me or can some one have the same problem ?

    Hi,
    Please post JSC2 related queries at:
    https://feedbackprograms.sun.com/login.html
    Cheers
    Giri

  • An error when edit a table with ObjectViewer

    when I try to set a value to NULL with ObjectViewer,its data_type is number,the developer said:
    UPDATE "TT"."ADDRESS" SET USER_NO= WHERE ROWID = 'AAAOMXAAFAACH3GAAq' AND ORA_ROWSCN = '4563636967634'
    One error saving changes to table "TT"."ADDRESS":
    Row 118: ORA-00932: inconsistent datatypes: expected NUMBER got DATE,
    if the data_type is varchar2,it works:
    UPDATE "TT"."ADDRESS" SET NAME= WHERE ROWID = 'AAAOMXAAFAACH3GAe' AND ORA_ROWSCN = '4563636967631'
    Commit Successful
    I have no idea what's going on...

    Sorry, this got broken while fixing Re: Bug in 1.5.1 Deleting number value in data grid
    I'll let you know on how soon the fix could be delivered.
    -Raghu
    Edited by: RaghvendraSaboo on Mar 31, 2009 12:43 PM

  • Error when creating DataWarehouse Tables

    I am getting an error when trying to create Datawarehouse tables from DAC ETL Management. See log below.
    =====================================
    STD OUTPUT
    =====================================
    CREATING SIEBEL DATABASE OBJECTS
    D:\orahome\10gR3_1\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u ******* /p ******* /c "OBIEE DW ETL" /G "SSE_ROLE" /f D:\orahome\10gR3_1\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /Z N
    Creating table W_A_MNTH_H ...
    Error while importing Siebel database schema.
    =====================================
    ERROR OUTPUT
    =====================================
    D:\orahome\10gR3_1\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u SVCOBIEEDW /p ***** /c "OBIEE DW ETL" /G SSE_ROLE /f D:\orahome\10gR3_1\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /Z N
    Connecting to the database...
    Connected.
    Reading tables and indexes from DDL file...
    Read 1070 tables and 0 indexes from DDL file...
    Reading existing schema...
    Read 0 tablespaces, 0 tables and 0 indexes from existing schema...
    Running SQL statements against the database...
    S0001: [Microsoft][ODBC SQL Server Driver][SQL Server]There is already an object named 'W_A_MNTH_H' in the database.
    create table W_A_MNTH_H (
    ROW_WID numeric(10, 0) not null default 0,
    BASE_MNTH_WID numeric(10, 0) null,
    PRE_MNTH_WID numeric(10, 0) null,
    YAGO_BASE_WID numeric(10, 0) null,
    YAGO_PRE_WID numeric(10, 0) null,
    PER_NAME_HALF varchar(50) null,
    PER_NAME_MONTH varchar(50) null,
    PER_NAME_QTR varchar(50) null,
    PER_NAME_TER varchar(50) null,
    PER_NAME_YEAR varchar(50) null)
    writeExecDDL error (UTLOdbcExecDirectDDL pDDLSql).
    writeExecDDL error (pOperCallback UTLDbDdlOperTblCreate).
    Error in MainFunction (UTLDbDdlDbMerge).
    Error in Main function...
    Any help would be greatly appreciated!
    Thanks,
    Brent

    I am having same issue... did you get around with it????
    Thanks in advance

  • Error when updating xml table

    Using IDCS3 I created a master table and exported as xml. Created a working ID file and copied the table over so structure was duplicated with all elements. Deleted some rows I didn't need and made some text changes in the master table.
    According to the manual, when merging the tables, the source should ignore elements that are no longer there and update the text in the remaining cells.
    Tried to update the xml by updating the link but get an error "Cells too small to split".
    I'm new to xml so any advice would be appreciated.
    Regards,
    Gerry

    It appears that ID can't change the cells or rows in a table, although it can change the content. The only solution is to change the table to text and modify the elements that way. The solution removes some flexibility in using tables to manage data.
    Regards,
    Gerry

Maybe you are looking for