Error when defining successor for node

Experts,
We are having a problem with one of our workflows that keeps erroring whenever we try to complete it. The error message states "Error when defining successor for node 0000000159". This error does not occur in 4.6c environment and the workflow is working fine. However, our team is in the process of upgrading to ECC 6.0 and the workflow is not working properly in that environment. The workflow is designed for BO BUS2038 and the error occurs when we try to close all tasks and complete the workflow. Can someone direct us to something that we can check, we've pretty much exhausted all our options? Thanks.

Hi Teferi,
This problem occurs in ECC 6 when a step with Synchronous Task/Method does not have the Step executed outcome activated (this is allowed in 4.6C for synch task with terminating events). Check if your Task/method is synchronous.
Cheers,
Ramki Maley.

Similar Messages

Error when defining successor for node 0000000198

Hello ,
We are using leave request service on ESS portal.
From last few days we are getting error like " Error when defining successor for node 0000000198 "
All agents are assigned properly and also v have checked PFTC setting for Workflow.
the method which are using is Synchrounous.
this error is nt coming perticulary for one employee but it is coming for sick leave workflow.
Please help
thanks

Hi,
This is a binding issue between the workflow container and the task
container because we can see the text in the workflow container but
it is empty in the task container.
Our proposed solution is to go into the Dev or QAS environment and
regenerate the binding between the workflow and this particular task.
We will test and if this works, this will resolve issue.

Error when defining successor of node in workflows

Hi Experts,
I am receiving an error which says "error when defining successor of node XYZ". However in my workflow template, this particular XYZ node does not exists.
Also I found one entry in SWP_SUSPEN table for the main workflow. I tried to execute the report manually RSWWERRE. Still it did not work out.
I also tried to use transaction SWF_ADM_SUSPEND. However my workitem is not showing in the list.
Kindly help me in this issue.
Thanks
Gopal

Hi,
This problem occurs because the nodes system table with respect to workflow is not updated properly. I hope you might have deleted or changed the workflow design after this you need to update the index of the workflow template too.
Follow the below steps
1. Execute PFTC choose task type as Workflow template and open in change mode.
2. On menu goto Addtional Data ---> Agent Assignment ---> Maintain
3. Choose the workflow template ID and click on the icon on the application tool bar with Red and white colur (Football ) i am not sure I think you can try with CTRL + F11 but you hvae to update the index.
After doing this Execute SWUD txn Check for the consistencies of the workflow template. if you do not find any error refresh the buffer and org environment.
Even after doing all this stuff you still face the issue then generate a version just simply insert a dummy step in the workflow activate and then delete the dummy step activate and refresh the buffer and org environment and try to execute.
This error ususally occurs (upto my knowledge) if the nodes table of the workflow is not updated properly, So the above mentioned ways are to deal with it.
Regards
Pavan

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Error when loggong on for external ID "": Error during SAML 2.0 logon

Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding: POST
N SAML20 IdP Name: http://xxxxxx/adfs/services/trust
N SAML20 Status Code: urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c 16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c 16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c 16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c 16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>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</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>

Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ

Error when opening Count for Campaigns ZSEG_D02_Q0001.

I get the attached error when opening Count for Campaigns ZSEG_D02_Q0001 on the portal.
Please tell me what can be the reason behind this.

Hi,
you write field routine for that infoobject(BPSTATE), like below.
DATA X TYPE /BI0/OIBPSTATE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = <SOURCE_FIELDS>-BPSTATE
 IMPORTING
 OUTPUT = X.
RESULT = X.
I HOPE IT SHOULD WORK.
Regards,
Ranganath.

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer

dear all,
I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?

I am also getting the same error, using 11g.

Error when charging hierarchy for infoObject hieracky for 0MATERIAL

Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
[http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
[http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
[http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
Any Idea? Thank-you!
Artur.
Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
I hope this helps
Regards

Error when executing statement for table/stored proc DB2 - Data Truncation

Hi,
I have one call sp in XI with n parameters int and two parameters out.
well, to implement the interface gives the following error
com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPSAPAR9' (structure 'Statement'): java.sql.SQLException: The number of parameter values set or registered does not match the number of parameters
Thanks for your help
Ximena
Edited by: Ximena Gonzalez on Feb 19, 2008 11:50 AM
Edited by: Ximena Gonzalez on Feb 20, 2008 12:17 PM

My Error is change
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAPPRG.SPSAPAR9' (structure 'Statement'): java.sql.DataTruncation: Data truncation
but de change DT SP
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:AlistReqDet2_MT xmlns:ns1="urn:proxl:tmuc:proxl01:AlistReqItems">
<Statement>
<SPSAPAR9 action="EXECUTE">
<table>SAPPRG.SPSAPAR9</table>
<ISAPNU1 isInput="TRUE" type="STRING">0080000353</ISAPNU1>
<ISAPEM1 isInput="TRUE" type="STRING">'LU'</ISAPEM1>
<ISAPC05 isInput="TRUE" type="STRING">15353</ISAPC05>
<ISAPSEC isInput="TRUE" type="STRING">10</ISAPSEC>
<ISAPLOT isInput="TRUE" type="STRING">'lats'</ISAPLOT>
<ISAPCA1 isInput="TRUE" type="STRING">10</ISAPCA1>
<ISAPCA2 isInput="TRUE" type="STRING">10</ISAPCA2>
<ISAPKIL isInput="TRUE" type="STRING">10</ISAPKIL>
<ISAPES1 isInput="TRUE" type="STRING">'T'</ISAPES1>
<ISAPSW isOutput="TRUE" type="STRING" />
</SPSAPAR9>
</Statement>
</ns1:AlistReqDet2_MT>

Error when creating interval for number range object

Hi,
I am trying to transport my BW stuff from QA to Production and I am getting the following error in the transport logs. The info objects are inactive in RSA1.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic YRESD: Error when creating interval for number range object BIM0000396
Can some body advise me what's wrong? Is something need to be maintained in number ranges?
Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Thanks.
Edited by: Raj G on Mar 20, 2008 11:38 AM

Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Which system are you checking this?
refer: Re: Transport Source Systems from DEV to Testing for step to map the source systems for transport

Error when executing statement for table/stored proc. : ORA-00911

Hi All,
I am posting IDOC->XI->JDBC, approx 5000 Idocs.
But few messages are giving following error in XI-_SXMB_MONI
Can any one guide me what is the cause of error? I check whole Idoc data I am not able to see bad character? can any once guide me what are the bad character in XML to post data in oracle? so that i can search in XML and how to avoide this error.
"com.sap.aii.af.ra.ms.api.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'HRP1001' (structure 'INSERT_PAD34'): java.sql.SQLException: ORA-00911: invalid character"

> I am talking about following IDOC.<ZRMD_A06> ->
> <E1PLOGI SEGMENT="1">-> <E1PITYP SEGMENT="1"> ->
> <E1PAD34 SEGMENT="1"> -><PROZT>0.00 #</PROZT>.
> Can we remove this # during message mapping in XI??
sure you can remove it using Replace function or by writing UDF.
as I am seing # is last character..so remove # with " " (single space) and then use the TRIM fucntion.
Thanks
Farooq.
*Rewards points if you find it useful*

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I think I solved the problem by initiating the update in a different way, from the itunes panel where I can click to start the update, instead of saying yes when asked if I want to update when itunes launches in response to the iphone being plugged into the computer.

Error when defining successor for node

Similar Messages

Maybe you are looking for