Error when generating Data Provider

Hi ,
While executing a query in the Quality system I get an error stating - "Error while generating Data Provider".
When the same query is executed in the Production system , it executes successfully .
Any pointer , Please reply asap .
Regards
Manpreet

Hi Manpreet,
Use the 'verify' icon in the query designer to check whether your query definition is correct. Also u you
can check if you can execute the query in the backend with transaction RSRT2. In RSRT2 try re-generating
the query before running it.
Hope it helps.
Regards,
Javed

Similar Messages

Error while generating Data provider

We are facing a weird issue while using Design Studio 1.2. Locally the tool works fine but when we use it from BI-Launchpad or through BI Enterprise it gives intermittent error "Error while generating Data Provider"
Same setup works fine in our Validation Environment.
We have tried running repair for Design Studio, redeploy the war files, creating new view but issue still exist.
We have BI 4.0 SP7 installed on Windows 2008 R2 system.
4 CMS running in cluster, Design Studio 1.2 is installed on 3 Nodes out of 4.
For now we are using 1 tomcat to access the system to narrow down the issue.
Experts please help us to resolve this issue.
Attach is the error message we are receiving

I am not clear what your data source is, but I recommend checking the PAM https://websmp102.sap-ag.de/~sapidb/011000358700001013822013E because there are some limitations with Design Studio and BI4.0

Error when generating master data routines

Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen

Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW

Error generating data provider-Query cant be released

Hello Experts,
I am working on web template (WAD 3.5) where i have 6 graphs each having independadnt data provider (Bex query).
I also have drop boxes which represents the selection screen of queries attached to graphs.
'Affected data providers list' of dropboxes consist of all data providers that are attached to graphs in template, as each graph is supposed to get refreshed if user changes drop box selection.
Template was working fine until i made the change to query 2 which is dataprovider 2 for graph 2.
Since then i am not able to run template it gives me error -
-The query cant be release for OLE DB for OLAP
-Query couldnt be open
-Error generating data provider.
As i checkd that qury independantly in query analyzer, its working perfect without any error.
What could be the possible reason for this error then??
regards,
Pritesh.

Hi Manpreet,
Use the 'verify' icon in the query designer to check whether your query definition is correct. Also u you
can check if you can execute the query in the backend with transaction RSRT2. In RSRT2 try re-generating
the query before running it.
Hope it helps.
Regards,
Javed

Error when generating master data routines when activating infoobject

Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.

If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM

ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

0COSTCENTER Error when generating master data routines

Hi,
Characteristic 0COSTCENTER properties are changed. Check box - Characteristic is document attrib. has been checked in. Then the same is saved and activated. Again when trying to remove the check box and activating the 0COSTCENTER characteristic, the system says 0COSTCENTER Error when generating master data routines.
The Object Status of the Characteristic is showing in "Inactive, not executable".
Erorr message is:
Error in activating the InfoObjects
Message no. R7286
Please let me know how to activate 0COSTCENTER.
Regards,
Ravi

This has been solved.
In SE14, I have also deleted the data.
Go to Tcode SE16, IO Class is BW* and then select the relevant attribute then execute, select all the line items.
Go to Table Entry ==> Delete.
Go to Tcode RSODADMIN and Tab => Go to Generate Document Properties Tab ==> Select the Characteristic ==> Click Generate Document Properties.
I am able to activate the Infoobject 0COSTCENTER again.
Hopefully, this would be helpful for others also.
Regards,
Ravi

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error when generating catalog SRM_EXTRACTED_CTLG

Dear All,
We are trying to transfer product and contract catalogs from SRM server to Catalog authoring tool. The RFC connections were created and scenarios in XI have been imported as per the cookbook. The XI part seems to be working fine and a correct response was received by XI (as per SXMB_MONI), but we find the following error in the SRM application log (tcode: SLG1)
The following exception was raised:
/CCM/CX_OBJECT_CREATION_FAILED
Error when generating catalog SRM_EXTRACTED_CTLG
The exception occurred at the following point:
Program /CCM/CL_CATALOG_MANAGER=======CP
$EXC_CLASS /CCM/CX_OBJECT_NOT_FOUND
The earlier threads seemed to mention applying service packs so we did a check and found everything fairly up to date, as follows:
SRM Server 5.5 (Service Pack 4)
ABAP Rel 7 (Service Pack 7)
CCM Server 2 (Service Pack 4)
As I'm basically an XI person, I'm not sure how to debug this error. Can anyone please help me out on his?
Thanks and Regards
Arun

Hi All,
Just bumping up my question again. Any pointer on this... please?
Best regards,
Arun

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Error when sending data request

Hi All,
   i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from ecc 6.0 . all of this schedule's showing the status "error when sending data request" with the following details.
status
diagnosis
the request idoc could not be sent to the source system using rfc
system response
there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
in step by step analysis it is showing
   rfc to source system successful showing with ash status
   data selection successfully stated and finished ? show with red status
in that details tab
request : showing with green status
everything ok
extraction :showing with red status
missing messages
transfer(idocs and trfc) : missing messeges
processing(data packet) : no data
    it is showing technical status with red as processing overdue
                       processing step call to source system
   so it is showing error with 0 from 0 records.
please any body could help me for solving this error.
regards,
naveen.

Hi
Seems you have connectivity issues between the Source system and Bi system.
You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
Much of BASIS Issue .
Hope it helps and clear

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

Error when generating program /SAPAPO/TSM141

Hello APO Experts!!
I have one infocube for sales history, which has one key figure that contains the sales history values.
First, I was using this key figure in one planning area. This Key Figure Semantics for Read and Write Operations was 002 = Semantics for InfoCube key figures.
Now, I had to include the same key figure in another planning area and with the same configuration Semantics = 002.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" when trying to access the data in the planning books that are created in the first planning area.
For the second planning area, nothing happens, everything is working correctly.
Do you have any idea of what this could be?
Regards
Anglea

Hi
Sounds like a Planning Area extraction problem. First of all check that all your required BW InfoObjects are created for the Planning Areas, then check that the Semantics you mentioned are the same for all Aggregates in the Planning Area.
Also try running program /SAPAPO/TS_PSTRU_GEN to regenerate the planning area extractor.
Delete and recreate the data source.
Hope that helps
Regards
Ian

Error when generating update program

Hi,
I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
regards,
Neeraja
null

Hi,
Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
With Regards

Error when generating Data Provider

Similar Messages

Maybe you are looking for