Error when getting data (RSDRI_CUBE_READ) - RSCRM_BAPI

Hello Gurus,
            I am getting a error when I try to create a extract using RSCRM_BAPI using Process Chain.
            I created a job and used that in the Process Chain, Once I run the Process Chain it is executing and
           the job is deleted and the extract gives me this error in the Monitor.
            Error Message - Error when getting data (RSDRI_CUBE_READ)
            If I run manually I am able to see the extracted records.
            Please help.
Regards,
Raj

Hi,
"Unknown error when executing MDX" is msg number BRAINOLAPAPI012.
Check out these 3 SAP notes:
1091523 MDX: System error in connection with named sets
1252372 OLE DB for OLAP: Additional corrctions for new MDX parser
1282785 MDX: System error "Invalid MDX command with <internal>
Also test in transaction MDXTEST to see if your statements are syntactically correct.
Rgds,
Colum

Similar Messages

Error when reading data from socket

Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?

Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit

Error when sending data request

Hi All,
   i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from ecc 6.0 . all of this schedule's showing the status "error when sending data request" with the following details.
status
diagnosis
the request idoc could not be sent to the source system using rfc
system response
there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
in step by step analysis it is showing
   rfc to source system successful showing with ash status
   data selection successfully stated and finished ? show with red status
in that details tab
request : showing with green status
everything ok
extraction :showing with red status
missing messages
transfer(idocs and trfc) : missing messeges
processing(data packet) : no data
    it is showing technical status with red as processing overdue
                       processing step call to source system
   so it is showing error with 0 from 0 records.
please any body could help me for solving this error.
regards,
naveen.

Hi
Seems you have connectivity issues between the Source system and Bi system.
You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
Much of BASIS Issue .
Hope it helps and clear

Shared Services API - Error when getting datasource weblogic/pool/PooledConnectionDataSource

Hello,
I have a program that connects to shared services using Java APIs. The code is usually working fine on other environment.
This one is on EPM version 11.1.2.1 and I get an error after this procedure --> system = CSSSystem.getInstance(context, "");
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.RegistryUtils buildConnFromDriverManager
WARNING: Check whether Oracle Home and Instance environment variables are defined appropriately. RootCause : weblogic.jdbc.sqlserver
.SQLServerDriver
Error when getting datasource weblogic/pool/PooledConnectionDataSource
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.RegistryUtils createNewConnection
SEVERE: Failed to create connection from data source. RootCause:weblogic/pool/PooledConnectionDataSource.
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.exceptions.RegistryException <init>
INFO: Registry Exception Occured - Failed to create new database connection using datasource.RootCause:[weblogic/pool/PooledConnecti
onDataSource]
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.Registry lookupComponentsWithException
INFO: EPMREG-11045
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.exceptions.RegistryException <init>
INFO: Registry Exception Occured - Failed to create new database connection using datasource.RootCause:[weblogic/pool/PooledConnecti
onDataSource]
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.Registry lookupWithException
INFO: EPMREG-11038
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.exceptions.RegistryException <init>
INFO: Registry Exception Occured - com.hyperion.hit.registry.exceptions.RegistryException: Failed to create new database connection
using datasource.RootCause:[weblogic/pool/PooledConnectionDataSource]
Jan 27, 2015 9:36:44 AM com.hyperion.hit.registry.Registry lookup
INFO: EPMREG-11038
Jan 27, 2015 9:36:44 AM com.hyperion.css.registry.RegistryManager RegistryManager
SEVERE: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PR
ODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
java.lang.NullPointerException
 at start.initialize(start.java:84)
 at start.Sample(start.java:59)
 at cc.main(cc.java:10)
I guess it is something with the SQLServer driver.Do you have any ideas?
My ORACLE_HOME and ORACLE_INSTANCE are set correctly.
Thanks in advance,
Regards,
Nicolas

Hello,
I finally got it working!
I added the weblogic libraries located under EPM/Middleware/wlserver_10.3/server/lib, and now it works fine.
It was a pain to find it out, because the error message did not specify that it was a missing library..
Anyway, if it helps, here is the list of external libraries I am using:
"wlssapi.jar"
"wlssapi-internal.jar"
"wlss-datatier.jar"
"wlss-descriptor-binding.jar"
"wlssdiameter.jar"
"wlssechosvr.jar"
"wlss-mbeaninfo.jar"
"WLSSSecurityProviders.jar"
"wlthint3client.jar"
"wlw-langx.jar"
"wlw-langx-ja.jar"
"wlw-langx-ko.jar"
"wlw-langx-zh_CN.jar"
"wlw-langx-zh_TW.jar"
"wlw-wsee-soapfault.jar"
"xmlparserv2_sans_jaxp_services.jar"
"xmlrpc-2.0.1.jar"
"audit-client.jar"
"castor-1.0.5.jar"
"com.bea.core.apache.commons.pool_1.3.0.jar"
"commons-lang-2.1.jar"
"css.jar"
"dms.jar"
"interop-sdk.jar"
"ojdl.jar"
"quartz.jar"
"regexp.jar"
"registry-api.jar"
"scheduler_ces.jar"
"sqljdbc.jar"
"wf_ces_utils.jar"
"wf_eng_agent.jar"
"wf_eng_api.jar"
"wf_eng_server.jar"
"wlcipher.jar"
"wlclient.jar"
"wlcommons-logging.jar"
"wlconnector.jar"
"wldb2.jar"
"wldeploy.jar"
"wlinformix.jar"
"wl-j2ee-client.jar"
"wljarbuilder.jar"
"wljmsclient.jar"
"wljmxclient.jar"
"wllog4j.jar"
"wlnmclient.jar"
"wlpool.jar"
"wlsafclient.jar"
"wls-api.jar"
"wlss.jar"
"wlss_i18n.jar"
Thank you all for your help.
Regards,
Nicolas

Activating DemoContent: Error when reading data target

I'm trying to activate the SAP Demo cube Purchasing Data (0D_PU_C01). The Grouping Mode is set to In Dataflow Before and Afterwards.
When I simulate installation, I get the error message Error when reading data target 0D_PU_C01 (Message no. RSAU126) in the logs (although in the Collection Area the Simulation Result column is marked with a green check).
I could find only 2 notes related to this error in the SAP Service Marketplace. SAP note nr. 540873 is about the BW indexing job. Note nr. 587796 (Error in after import of update rules) seams more appropriate, however not thoroughly right. In fact it refers to BW 3.1 Content or BW 3.0B.
My system version instead is:
BI_CONT 353
SAP_BW 350
The very same problem occurs when I try to activate the SAP Demo Sales and Distribution.
Any suggestion?
Thanks, Davide

Ok, it worked! Now however I have some more doubts.
1. I can't find the InfoObjects (e.g. 0D_GR_QTY, 0D_PLANT, 0D_MATERIAL, etc.) anywhere in Modeling -> InfoObjects, even if:
a) I can find them under the InfoSource tree of the SAP Demo Application Component
b) they appear activated in Business Content
What's going on?
2. The newly activated Purchasing Data cube has been added to the Unassigned Nodes InfoArea, and not to a newly created SAP Demo Purchasing (0D_MMPUR) InfoArea, similarly to the structure I saw when collecting the InfoProvider in Business Content. Is this the normal behaviour?
3. No DataSource has been assigned to any of the InfoSources. I read at:
http://help.sap.com/saphelp_erp2004/helpdata/en/43/57df37463a126ae10000009b38f842/content.htm
that the SAP Demo Source System will be used. What I can't understand is if I need to manually create and select this Source System. I thought it would be automatically created and assigned during the Business Content's cube activation. This is not the case. What steps would I have needed to perform?
Davide

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

ERROR : Cannot get data set while connecting to BI.

Hi,
I am trying to connect to BI trouggh my application. I am following one of the document which i got from SDN. But now i am getting ERROR : Cannot get data set while connecting to BI. Can any one tell me why i am getting this error.
when i tried to excecute first time it gave the same error for the bellow given Querry. But after that it got excecuted. Then again It gave the same error. But it got excecuted twise like that after that it dint get excecuted once also.
Querry: SELECT
[Measures].MEMBERS ON AXIS(0) ,
NON EMPTY [0VENDOR].MEMBERS ON AXIS(1)
FROM [0PUR_C01/0PUR_C01_DB_Q04];
Regards,
H.V.Swathi
Edited by: H.V Swathi on Jun 1, 2009 1:33 PM

HI,
Thanks for ur reply.
NO
i am using this part of code to display the result in IFrame.
IConnectionFactory connectionFactory = null;
 IBIConnection connection = null;
 IBIDataSet dataset = null;
// get the MDX statement entered by the User
 String mdxStatement = wdContext.currentContextElement().getMDXQ();
 wdComponentAPI.getMessageManager().reportSuccess("mdxStatement "+mdxStatement.toString());
// Declare a stringbuffer to store the HTML Code
 StringBuffer l_strXmlFile = new StringBuffer();
 wdComponentAPI.getMessageManager().reportSuccess("l_strXmlFile "+l_strXmlFile.toString());
 try {
// Connect to BW System
 Context initctx = new InitialContext();
// Perform JNDI lookup to obtain connection factory
 wdComponentAPI.getMessageManager().reportSuccess("l_strXmlFile eeeeee ");
 connectionFactory =
 (IConnectionFactory) initctx.lookup(
 "deployedAdapters/SDK_XMLA/shareable/SDK_XMLA");
// Establish connection using default connection properties
 wdComponentAPI.getMessageManager().reportSuccess("connectionFactory "+connectionFactory);
 connection =
 (IBIConnection) connectionFactory.getConnectionEx(null);
 wdComponentAPI.getMessageManager().reportSuccess("connection "+connection);
 IBIOlap olap = ((IBIConnection) connection).getOlap();
 wdComponentAPI.getMessageManager().reportSuccess("olap "+olap);
// Execute the MDX statement and retrieve the data set
// using the execute method of the IBIOlap interface.
dataset = olap.execute(mdxStatement);
wdComponentAPI.getMessageManager().reportSuccess("dataset "+dataset);
} catch (Exception e) {
e.printStackTrace();
wdComponentAPI.getMessageManager().reportException(
e.getLocalizedMessage(),
true);
} finally {
try {
connection.close();
} catch (Exception e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
if (dataset == null) {
wdContext.currentContextElement().setResult_Visibility(
WDVisibility.NONE);
} else {
wdContext.currentContextElement().setResult_Visibility(
WDVisibility.VISIBLE);
// Render the data set.
l_strXmlFile
.append("<html>")
.append("<head></head>")
.append("<body>");
// Display the MDX that has been executed.
l_strXmlFile
.append("MDX Statement that was executed: ")
.append("")
.append(mdxStatement)
.append(" ");
try {
BIDataSetTableModel table =
new BIDataSetTableModel(dataset, false);
l_strXmlFile.append("Result set:");
l_strXmlFile.append(
"<table width=700 border=1 cellpadding=0 cellspacing=0>");
int row = table.getRowCount();
int col = table.getColumnCount();
for (int i = 0; i < row; i++) {
l_strXmlFile.append("<tr>");
for (int j = 0; j < col; j++) {
BITableItem item = (BITableItem) table.getValueAt(i, j);
l_strXmlFile.append("<td class=\"headCenter\">"); l_strXmlFile.append(Helpers.escape(item.toString()));
l_strXmlFile.append("</td>");
l_strXmlFile.append("</tr>");
l_strXmlFile.append("</table>");
l_strXmlFile.append("</body></html>"); } catch (BISQLException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
// read the stringbuffer into bytes
byte[] l_byteData = null;
try {
l_byteData = l_strXmlFile.toString().getBytes("UTF-8");
} catch (UnsupportedEncodingException e) {
wdComponentAPI.getMessageManager().reportException(
e.getLocalizedMessage(),
false);
// Create a web resource and set the value of the
// context variable "IFrameData" to it's URL
IWDCachedWebResource l_File =
WDWebResource.getWebResource(
l_byteData,
WDWebResourceType.HTML);
try {
wdContext.currentContextElement().setIFrameData(
l_File.getURL());
} catch (WDURLException e1) {
wdComponentAPI.getMessageManager().reportException(
e1.getLocalizedMessage(),
false);
Reagards,
H.V.Swathi

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error: CONNE_IMPORT_WRONG_COMP_TYPE
Exception: CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". The data type is "D" in the dataset, but "C" in the program.
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
 Jaume Saumell
Message was edited by:
 Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

IR webclient: error when uncompressing data retrieved: *Data Error*!

A small (?) number of IR webclient 931 installations we notice the next error when processing: " error when uncompressing data retrieved: *Data Error*! " It does not seem to be user or permission/provision related.
Does anyone have an idea how to solve it. Reinstalling the IR webclient does not solve it.

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

Error when using data postion delay

I obtained this error when using data position delay. Can anyone please
tell me the reason why I can not configure the delay to be between 0.7
and 0.8.
Possible reason(s):
Driver Status: (Hex 0xBFFA403F) Unable to configure requested delay property given the current clock rate.
Ensure that the delay value specified is within the valid range for the
frequency specified or do not configure property for delay operation.
Device: PXI1Slot2
Property: Data Position
Sample Rate: 40000000.0
Requested Value: 0.71875
Supported Values: 0.000 through 0.200, 0.300 through 0.700, 0.800 through 1.000,
Status Code: -219401

Timothy,
The 656x devices have a limit on the available data delay values based
on frequency. Between 25MHz and 50MHz there are "holes" in the
available delay range. Above 50MHz, the full 0 to 1 data delay is
valid. If you look in the specifications installed with NI HSDIO
for the NI 656x, on page 7, Figure 1, there is an illustration showing
how to compute what the valid range is for the frequency of interest.
For example, at 40MHz, valid values are:
0 to 0.2
0.3 to 0.7
0.8 to 1
In the error message posted below, you tried to input a value of 0.71875 which is not within these ranges.

Error when getting service facade : Service manager initialization failed I

Dear Friends,
we have created entities in CAS((nwds 7.0.1)) and deployed in J2ee.
During Testing:
when we right click on entity and click on test.
service Browser. is opening with two Buttons.
One Button it is " start with CAF source".
when we select this its throwing error
Error text:
Error when getting service facade : Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject. because of this we are unable to test the entity.
request to throw pointers to clear this error.
Answers will be rewared.
Regards
shekar chandra

even if go using this url http://hostnae:portname/caf
i could see the main page then i click TestTools->Service browsser, Still lso i am getting the same screen with Buttons.
one saying "Start with CAF Source" @ other "Start with ABAP
Source"
If .ear is one of the cause I have removed all the projects from DC->.dtr.Now my NWDS is empty.
Still why it is comming.
Regards
Shekar Chandra

EPM11.1.1.2:error when uncompressing data retrieved

After I open a BQY in IR WEB client and click the "table",there is an error happened. The error message is "error when uncompressing data retrieved:*Data Error*". My IE has no google toolbar or any other toolbar. What's wrong?

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

IRWebclient: error when uncompressing data retrieved: *Data Error*!

We experience a sporadic "error when uncompressing data retrieved: *Data Error*!" while processing a query with IR webclient 931. The problem occurs on several webclients but on other desktops it does not. The IHTML processes fine.
Any one an idea? reinstalling interactive webclient on the same pc does not help.
Completely reinstall the pc (os and other client software including interactive webclient) does help.

Hi there, I got to the point where I found the cause, but now I still need to solve it. perhaps anyone can give me a hint.
931 bqy's are stored on server as zip files. (although they are renamed as *.1) On 832 they were stored as bqy files (although they were renamed to *.1 too).
The clients which had the error message tried to open their 931 documents with the 832 plugin. Which does not have the capebility to uncompress the .1 file. In that perspective is the error message very obvious.
We need to run both 832 intelligence plugin and the 931 webclient on the same client.
How can we force that the corrcet version is used for openeing the docs?

Error while getting data objects for instance

Hello Expert,
I am getting some weird error - whenever there is a new process is triggered and I check context Data, I get following error -
"Error while getting data objects for instance processinstanceid"
Thanks is advance
Priya

Hi Priya,
this is a known issue in the xml processing of the Java Virtual Machine. Please refer to the SAP Note for this issue: 1949395
This should solve your issue.
Best regards,
Stefan

Error when getting data (RSDRI_CUBE_READ) - RSCRM_BAPI

Similar Messages

Maybe you are looking for