Error when I added the Google iPhone API in my project!

Hi,
I'm writing an app where I need the Google iPhone API! So I added the API in my project but when I'm trying to build it it gives me an error.
Error:
*Command /Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.2 failed with code 1*
Could someone explain me what I need to do to get ride of this error?
I tried cleaning my project but that didn't help either!
Greetings
Kevin
UPDATE: I forgot to say that it gives me this error 218 times and each time on a file from the Google API!
Message was edited by: kevinp1988

Hi,
During my wait on my first (and quick reply) I tested if I had this problem each time when I added the API and this test was positif!
So I googled abit and came to this website (http://johntwang.com/blog/2009/06/08/how-to-use-google-apis-with-iphone-sdk/) This dude wrote a little guide on how to set up your project with the API!
After doing all this it still gives me errors!
Here is a screenshot: http://i42.photobucket.com/albums/e326/kartingfreak/Screenshot2011-02-11at194310 .png
To answer to your question: I just opened the Xcode project of the Google API and dragged the folder called 'GData Sources' to my project.
Greets
Kevin

Similar Messages

All of a sudden my iPhone 4S keeps shutting the sound off when I use the google app

When I use the google application on my iPhone 4S it shuts the sound off on the hole phone so I have to go into the settings and change the ringer and alerts so that the sounds will work again.

Uninstall the app and reinstall it. If it persists dont use it. simple

I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.

I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
The box displayed:
Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
What do I need to do to bring the correct library into the transportable code?

Hello,
I was unable to reproduce the behavior that you saw. I was able to deploy my application with the Linear Fit PtByPt without issues.
Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
Justin Parker
National Instruments
Product Support Engineer

Error when I deployed the java EAR application in NWDS 7.1

HI All,
I got the error when I deployed the java EAR application in NWDS 7.1 version..help me out...........................................
com.sap.ide.eclipse.deployer.api.APIException: DeployException,cause=[ERROR CODE DPL.DCAPI.1023] AuthorizationException.
Reason: , An error occurred during the deployer retrieval. Cause =[ERROR CODE DPL.DC.3151] The user LJ4PJW could not be authorized, because doesn't own the (com.sap.engine.interfaces.security.ServiceAccessPermission dc) permission for deploy controller. at com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
Thanks
Costa

The user LJ4PJW could not be authorized, *because doesn't own the* (com.sap.engine.interfaces.security.ServiceAccessPermission dc) *permission for deploy controller. a*t com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
The user is not have proper authorizations. Use some other administrators user id which has all admin roles and authorizations assigned and try to deploy.
Regards,
Ravi

Firefox 3.6.3 is not supported by the Google Font API

I have Firefox 3.6.3 on my Macbook, but is only detected as 3.0.1on this form. When I link to the Google font website, it says, "We're sorry, but your browser is not supported by the Google Font API. To browse the fonts in the Google font directory please switch to a more modern browser." So I have to use Safari to get to the page.
== URL of affected sites ==
http://code.google.com/webfonts

Maybe this article will help - [[Websites or add-ons incorrectly report incompatible browser]]

An error occurred while adding the Cluster to the list

Hello,
I've installed the HFM 9.3.1 client on a Windows Server 2003 machine and now I'm attempting to configure it. I get all the way to the Server/Cluster Registration and when I try to add my one and only HFM application server to the list I'm present with this error.
"An error occurred while adding the Cluster to the list".
I don't see anything of use in the config tool log and as a result, I'm stuck. The odd thing is that not more than 10 minutes previously I added just finished installing the HFM client on another Windows Server 2003 machine and it installed / configured perfectly.
What am I missing?
Thanks!

You may have a DNS error of sorts. From a command line on the server which presents the error, ping the servername you are trying to reach. Do not use the cluster name, but instead use the server name or IP address. If you successfully reach it, use this in the registration utility. Once the server has been reached, it will return the cluster's name. If you cannot reach it using ping, focus on the underlying DNS problem.
--Chris

Where is the Google Web APIs Developer's Kit and developer's license key???

Hi!
I'm trying to follow the web services tutorial on page 490 of the Oracle JDeveloper 10g Handbook (written in 2004 so it is a little dated). Part I of the tutorial is to register with Google and download the Google Web APIs Developer's Kit, but I can't find it anywhere (at least not with that name). Does anyone know where is it?
On a related topic, this tutorial (http://www.oracle.com/technology/oramag/webcolumns/2003/techarticles/balusamy.html) talks about a Google developer's license key (Understanding Google Web APIs section), but again, when I created a Google account I did get a confirmation email, but no second email with no key. Where do I find this?
TIA for any help.

what type of application?
Here is the basic of how to use a Web service in a JSF/ADF based application:
http://www.oracle.com/technology/products/jdev/viewlets/1013/WebServicesAndADF_viewlet_swf.html
and this section of the how-to shows you how to create a basic Java client:
http://www.oracle.com/technology/obe/obe1013jdev/10131/devdepandmanagingws/devdepandmanagingws.htm#t6s1

I found an error when I changed the contact information.

I found an error when I changed the contact information.
Yesterday, I imported all my contact information from my old phone to my brand new iPhone 4S at an AT&T store. Everything looked fine, but all the first names and the last names were switched. So, I had to correct all contact information manually again. It was so ridiculous.
When I corrected the contact information, the names on my contact list were not changed immediately. For example, when the name of a person, ‘Doe John’, was changed to ‘John Doe’, the name on the contact list was not changed and remained as ‘Doe John’. After I rebooted my iPhone, the name on the list was changed correctly. Do I have to reboot every time when I switched the first name and the last name?
My iPhone Information
IPhone 4S White 16G
Model: MC924LL
iOS Version: 5.0.1 (9A405)

Is ths display order for contacts set the way you want it?
Settings > Mail,Contacts,Calendars > Display Order

Error when I change the BOM without a change number

Hi,
I would like to receive an Error when I change the BOM without a change number.
I define the modification parameter (EC management active and History reqmnt), I configure history reqmnt for BOM (I choice the status 1 and 3 for my BOM usage 5)
In change the message type I dont have the really message number in the liste.
How can I create a new message (045) so that I get an error by changing the BOM without a change number.
Thanks

Dear Dede,
check for the Authorization Object C_STUE_NOH for the
particular User Id's for which you want to Create or Change a
BOM without a Change number.
So assign this Authorization Object under all user id's for which
you want to have this control.
Adding the mentioned Authorization Object in particular User
Id's will resolve the problem.
This can be done using PFCG T code by adding in particular
Roles.
Revert back incase of any clarifications.
Regards
Mangalraj.S

Keep getting sync service error when trying to connect my iphone 5S.

Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I can delete history in safari but when i tap the Google icon on home page, it doesn't work

I have Safari on the Home screen and it opens to Google. I never use that icon. There is also a separate Google icon. I want to delete all history and cookies from Google. I found instruction online for how to delete history from Safari which i did successfully. But when i touch the Google icon on Home screen, the history still is there. I just don't know what to do. There must be a way. btw, i don't know why i have both Safari and Google. I might have added Google when i got the iPod or perhaps somone else did. i'm not sure it was there when i bought it.
I really need to delete the history. There must be someone out there who can tell me... and I would truly appreciate getting a solution. Thanks loads!!!

I retraced my steps to how i got the Google app:
App Store icon on Home Screen > Search, at bottom > entered Google
The first Google App on the screen appears:
Google logo small g in blue square: Google Search; Open (because it is already installed). Below that is a picture of the iPod with the usual Google Search screen. I have never inserted a link into a discussion group so i hope you can open this.
http://https://itunes.apple.com/us/app/google-search/id284815942?mt=8
Does this bring us any closer?

When you get the new iPhone 5S they say it come with al the iWork apps for free install already. But if i restore from back-up from an old device which doesnt have any iWork apps would I still receive those iWork Apps?

When you get the new iPhone 5S they say it come with all the iWork apps for free install already. But if i restore from back-up from an old device which doesnt have any iWork apps would I still receive those iWork Apps?

Hey Davin12,
Yes. The apps are not pre-installed, but rather you are prompted to download them the first time you launch the App Store in iOS 7:
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
iPhoto, iMovie, Keynote, Pages, and Numbers are free on the App Store for qualifying iOS 7 compatible devices activated or purchased after September 1, 2013
The first time you launch the App Store in iOS 7 on your qualifying new or factory refurbished iOS device, you will be offered iMovie, iPhoto, Keynote, Pages, and Numbers for free in addition to other free software from Apple. When you tap Download All and sign in with your Apple ID, the apps will be downloaded to your device and added to your store account. If you tap Not Now when you see the offer, you can go back to each of the apps in the store and download them one at a time for free.
Thanks,
Matt M.

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
Can someone help me with this issue please? Tks

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

My itunes sync stopped working when I got the new iphone. How to fix it?

My Iphone 4 worked great. It synced with my itunes perfectly. I;d buy a song on my computer and moments later it would also show up on my iphone. I thought I configured all the boxes correctly when I got the new iphone but now the wifi sync feature seems to have stopped working. I went back and checked and it appears all the right boxes are checked but still no sync. When I go to wifi sync in settings it says it has to be plugged in, locked and the home comuter available. I tried that and it still wont wifi sync. Not sure what I am doing wrong. Help please.

Stopped working as in it's totally unresponsive?
Try restarting. Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.

Error when I open the new help in FCP7

I get a error when I open the new help in FCP7:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.

I have checked that Javascript was enabled in Safari (and it is).
I can read the documentation in Safari online using this link: http://documentation.apple.com/en/finalcutpro/usermanual/
I have now tried all the new/updated programs in the FCS3 suite they all have the same problem:
The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.
Mikael

Error when I added the Google iPhone API in my project!

Similar Messages

Maybe you are looking for