Error when I "Update Vault Path..."

I have had some lingering problems with my Aperture library that I am just getting around to addressing. One is that I need to back up to my vault, but it is not letting me do so. When I hit the little (red) refresh button on the bottom of my window, I get the message:
"Update Connected Vaults?
Some vaults are not connected. Do you wish to replace the contents of all connected vaults with the current contents of your library?
This cannot be undone."
Because I'm an adventerous guy, I did this, but when I try to refresh my vault the next time I get the same error.
So I started poking around and found the "Update Vault Path" menu item. This sounds like it should solve my problem, but when I go through and select my vault and try to update the path I get the error message:
"Incorrect Vault Selected
The path could not be updated because the selected vault does not match the original vault."
This is definitely the right vault. It is on a partition of my Time Capsule. However I may have moved the file or changed the name of something a few months ago, which I suspect is why I'm having this problem now?
What do I do to get that vault path back in order?

Is this Aperture 3? Are you talking about one library or multiple libraries? How many vaults do you have connected to the library?
If you click the *show/hide Vaults* button what does Aperture show you? This is the name of your vault(s) and their locations. Does that match what you think it should be?
Sounds like you may be better off just creating a new vault and using that going forward.

Similar Messages

I want to transfer my vault to a new HD. The new has been formatted for Mac. Update Vault path is grayed out, despite doing all the correct steps beforehand

I have followed directions to transfer my vault to a new HD. It is grayed out, despite doing all requisite steps beforehand. If I get 'info' on Aperture the lock icon shows and I cannot change it to unlock.

I think you may be getting confused by the 'Lock'.
The vault is locked in the files system to prevent accidental deletion.
The reason the 'Update Vault Path' is greyed out is because it is still detecting the original vault on your system.
Here's a simpler process.
Restart your system (Aperture may still have a reference to the vault and this will clear it).
Make sure you have copied the vault to the new location.
Move the vault to trash. It will warn you the file is locked. Continue to move it anyway.
Empty your system trash. It will warn you the trash has locked files. Continue to empty anyway.
Now the old vault is gone from your system, in Aperture, the vault will show as disconnected and you can update the vault path:
You can then Navigate to the new location:
And the vault will reconnect and show the available storage of the new drive:
I suspect you are following advice about trying to remove the lock. But this is not necessary, the lock means you'll simply get warnings when deleting (assuming you have permissions to delete), but you can jsut override these warnings. If at any stage you get an error saying the file is in use, just reboot and retry that stage.
Andy

Cannot click Update Vault path

I want to relocate my vault to another HD. I follow the directs (ejecting HD tghat houses vault, disconnecting computer, reconnecting computer, selecting the vault), but "update vault path" is grayed out. Running OS 10.8.5, Aperture 3.4.5

I'm a little uncomfortable with your mixing of terms like vault and library, and then talking about deleting libraries.
It is essential you grasp the concept of a Library and Vault, and the relationship between two before deleting anything.
Your phrases:
1) "I opened Aperture, opened Show Vaults and there is my libarary called Academics on the new HD."
and
2) "If I open the new HD, the library is listed, but it is not listed under show HD"
suggest to me you are having problems writing the words you mean, nothing wrong with that, we all do it. But if you write the wrong words and then get bad advice that you then act on, that's very bad!! So I just want to be extra careful on what you are really saying here.
1) When you choose 'Show Vaults' you see Vaults not Libraries
2) "Show HD" makes no sense, so I assume you mean "Show Vaults" again.
Previously you spoke of having a library called 'academics' and now you have found a vault called 'academics' on your old HD. Is this the same thing, did you just call it a library before or did you create a new vault for academics?
So let's start again and keep everything simple.
Forget what you have for a second, and lets just go through some basic concepts.
You buy Aperture and run it. You get a default library in your Pictures folder on your internal drive called 'Aperture Library'
You decide to create a second library called 'Documents' for storing your documents in (I do this).
You now have two libraries 'Aperture Library' and 'Documents'
Aperture can only work on one library at a time. While working on 'Documents' that's all you see. You don't see your images from 'Aperture Library', just 'Documents'. When you switch to from 'Documents' to 'Aperture Library' you now only see your photos in the 'Aperture Library', you don't see your 'Documents'. They are both completely seperate.
You decide your 'Aperture Library' is getting too big for your internal drive so you buy a large external drive. You use Finder to copy the 'Aperture Library' from your Pictures folder to you external drive.
To open your copied 'Aperture Library' from the external drive you can either use Finder to go to your external drive and double click on the copy of 'Aperture Library'. Alternatively, within Aperture you can use the menu item 'File' the sub menu item 'Switch to Library' and then the further sub menu item 'Other/New...' which will ask you to navigate to the library you want to open.
Now you have three libraries. 'Aperture Library' on your internal drive, 'Documents' on your internal drive and the copy of 'Aperture Library' on your external drive. If you are happy the copy is complete and intact you can then delete the 'Aperture Library' on your internal drive.
If required, you could then repeat for your 'Documents' library.
That's how Aperture works with libraries. There is no updating of paths, you just tell it which library you want to open, either by double clicking in Finder, or by using the 'File->Switch to Library->Other/New...'
Once you have opened a library in Aperture, it will remember it as a shortcut on the 'File->Switch to Library' menu, but while you have multiple copies of the library available this is unsafe to use as you wont know which copy of the library it has opened. Wait until you have deleted the old copies of the Library before relying on these shortcuts. Until then, use 'File->Switch to Library->Other/New...' (or Finder) to be certain you are opening the right copy of the library.
So now lets talk about Vaults.
As noted above, Aperture can only open one Library at a time. Regrdless of how many libraries you have, Aperture will only open one at a time.
Lets call this Library your current library.
When you create a Vault, you are creating it for your current library only. The vault you create and your current library get married. They are joined. When you update the vault it will copy the current library to that vault.
If we now switch to a different library, my 'Documents' library, when I 'Show Vaults' I will have no Vaults. This is because the Vault I created was for my 'Aperture Library' not my 'Documents' library. If I switch back to my 'Aperture Library' I will once again see the Vault I created for my 'Aperture Library'. Switch back to my 'Documents' library, and again I have no Vaults to show.
If, while still in my 'Documents' library, I now create a new Vault, this Vault gets married to the current library, my 'Documents' library.
So if I now switch back to my 'Aperture Library', I will see one vault, the vault for the 'Aperture Library' and if I then switch back to my 'Documents' library, I will also see one vault, the vault for the 'Documents' library.
The Vaults panel in Aperture is not a navigator, I will never see these two vaults in there at the same time. The Vaults panels only shows you the Vault that is married to the Library you currently have open.
This is (most probably) why you wont see your 'academic' Vault and 'Aperture Library' Vault in Aperture at the same time. They are Vaults for different libraries so you will only see the Vault for the current library.
For completeness I should mention that a Library can have muliple vaults (multiple backups). But all of these are married to the same library. So when you 'Show Vaults' you only ever see the vaults for the current library.
If you decide to move your Vaults from the old HD to the new HD, when Aperture shows you the Vault, it shows as 'Disconnected'. This means Aperture knows it has a Vault for the current library, but it now doesn't know where the Vault is located. This is when you now use the 'Update Vault Path' so you can tell Aperture where the Vault is now located.
(really) hope this helps!
Andy

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when transpotring Update Rules

Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.

Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

Error when generating update program

Hi,
I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
regards,
Neeraja
null

Hi,
Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
With Regards

I am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

sorry i was typing fast and didnt check spelling and stuff

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I think I solved the problem by initiating the update in a different way, from the itunes panel where I can click to start the update, instead of saying yes when asked if I want to update when itunes launches in response to the iphone being plugged into the computer.

HT4623 when i trying to update my iphone 5 to latest ios 7.04 always appeared error when the update almost done about 20 to 30 minutes

when i trying to update my iphone 5 to latest ios 7.04 always appeared error when the update almost done about 20 to 30 minutes

Hello micojen1920
If you are having an issue with updating your iPhone, try it through a different method like in iTunes or through software update on your iPhone in settings. If that does not work then follow the steps in the article below to force a restore on your iPhone. Make sure to back up first and you can always restore from that back up once your iPhone is up to date. The second article will assist you with the back up and restore process.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
Regards,
-Norm G.

Update vault path gives "Not a valid vault file".

Recently i've copied my vault file(s) to a larger disk.When trying to update the vault path (selecting gear below vaults) it gives me an error that it is not a valid vault file.
The disks are both formatted as Mac OS Extended (journaled) and I received no error's during the copying.
I know I could create a new vault file. But it should work. What Could I do to fix this?
Thanks if you can help.
P

It seems your VI has been corrupted. This may have been a LabVIEW error, or a disk file I/O error. You will need to revert to a backup. You should also do a disk scan to rule out any problems with the disk.

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

Error when I "Update Vault Path..."

Similar Messages

Maybe you are looking for