What is RMAN configure file ?

Hi,
When you create recovery catalog, and start RMAN, where does RMAN get information to decide to get configure from catalog database instead of control file? what is the file name? Thanks.

hi
if you connect ( currently) with target database control file then ur backup information goes in control file instead of recovery catalog..
C:\>rman target=sys/oracle
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1134976990)
RMAN> exit
Recovery Manager complete.
C:\>rman target=sys/oracle nocatalog
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1134976990)
using target database controlfile instead of recovery catalog
RMAN> exit
Recovery Manager complete.
C:\>rman target=sys/oracle catalog=rman/cat
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1134976990)
connected to recovery catalog database
RMAN> exit
Recovery Manager complete.
C:\>rman catalog=rman/cat
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to recovery catalog databaseRMAN> exit
Recovery Manager complete.
C:\>rman target=sys/oracle catalog=rman/cat
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1134976990)
connected to recovery catalog databasehope this helps
Taj
Message was edited by:
User 52

Similar Messages

RMAN configuration files

If a database server has a catastrophic failure and RMAN was run previously from that same database server are there any configuration files that RMAN would need to rebuild the database from backups stored on tape or is everything that RMAN needs stored in the backup?
TIA,
Dave

If you have the latest controlfile, spfile, full database and archivelog backups taken by RMAN, then no need of any configuration files.
If you use a recovery catalog even the DBID will be stored. So its not need to be remembered. You can get it from the catalog tables. Here is how
select db_id
from db t1, dbinc t2
where t1.db_key=t2.db_key
and t2.db_name = '&1';

What are the configuration files ( list them) in DCM repository

DCM Reference Guide says that Configuration information for OHS,OC4J, OC4j applications,OPMN,JAZN are stored in repository. Can any one give me the list of configuration files it is storing? Or How to list them.

betaneptune wrote:
An iMovie project is a bundle?
Yes. What appears in the Finder as a singel file is really a bundle of files.
But what are they?
I can't tell you exactly - but I'm sure there's data there that allows iMovie to undo things you've already done, references the event clips used in the movie, thumbnails, backups, transitions you've used - that kind of thing.
I deleted them on a junk project and so no ill effect, though I didn't check all the things you can do with a project.
Even so, I'd restrict that kind of experimentation to junk projects.
Regardless of whether it's safe to delete them, I'd like to know what they are.
Fair question. I wish I could tell you more.
Matt
Message was edited by: Matthew Morgan

No configuration files exist for this connector?

I am trying to install Oracle Application Table connector for that I have copied the all files/directory into ConnectorDefaultDirectory but still getting following error.
No configuration files exist for this connector.
Ensure that valid configuration XML files exist in the configuration directory.
Any help?
thanks
TK

I have server/ConnectorDefaultDirectory and when I unzipped the TableResource zip inside ConnectorDefaultDirectory ...... it created following folders
1. configuration (This folder contains DatabaseApplicationTables-CI.xml)
2. documentation
3. lib
4. ProviderDefinitions
5. resources
6. targetsystems-lib
Can you please let me know what should be configuration file name?
I have downloaded these zip files from following location
http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/connectors-101674.html
thanks for your help
TK

Find configuration files

Hi,
How to find what are the configuration files needed for default executables in Linux? Is it possible to find it?
For Example : xhost which has some configuration files.how to find those files by simple way?.
I am not good in OS level.
Thanks & Regards,
VN
Edited by: user3266490 on Jul 12, 2012 1:45 AM

Most system wide system and software program settings are stored in /etc and sub-directories. User specific settings are generally located in $HOME. You can use the "ls -a" command to show hidden files and directories that start with a period (.). The man page for a command will also typically show where the settings are stored, .e.g. "man xhost". Btw, the xhost program is obsolete and should not be used anymore.

What causes JBO-33001: Cannot find the configuration file /common/bc4j.xcfg

I know that the jbo exception message:
JBO-33001: Cannot find the configuration file /common/bc4j.xcfg
can be caused by several things including the file really not being there. But in my current case, I know it is there and can be found throgh the classpath, because I actually find it using Configuration.buildConfigurationFileNameFromClassPath and
Configuration.getConfiguration just before calling Configuration.createRootApplicationModule. Is there any way to turn on a diagnostic to find out what is really wrong?
I would also like to request an enhancement to give meaningful messages in the jbo exception.
Roger

This is on jdev 903 with patch running a local application attempting to connect to standalone OC4J 903. I think the error occurs before there is ever any attempt to make the connection to OC4J. Having one big catch-all exception for everything that can go wrong in creating the AM is pretty poor. I know in the past I have done manual editing of bc4j.xcfg and XML sentax errors cause exactly the same exception as not having the file at all. That is why I would at least like a list of all the causes behind the exception so I can go through and check them all.
Thanks,
Roger

What are the following entries doing in the following configuration file?

What are the following entries doing in the following configuration file?
Thank you
<include>coherence-pof-config.xml</include>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>

<include>coherence-pof-config.xml</include>

<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config>

<allow-interfaces> - The allow-interfaces element indicates whether the user-type class-name can specify Java interface types in addition to Java class types. Valid values are "true" or "false". Default value is false.
<allow-subclasses> - The allow-subclasses element indicates whether the user-type class-name can specify a Java class type that is abstract, and whether sub-classes of any specified user-type class-name will be permitted at runtime and automatically mapped to the specified super-class for purposes of obtaining a serializer. Valid values are "true" or "false". Default value is false.
<user-type-list> - The user-type-list element contains zero or more user-type elements. Each POF user type that will be used must be listed in the user-type-list. The user-type-list element may also contain zero or more include elements. Each include element is used to add user-type elements defined in another pof-config file.
<include> The include element specifies the location of a pof-config file to load user-type elements from. The value is a locator string (either a valid path or URL) that identifies the location of the target pof-config file.
http://wiki.tangosol.com/display/COH35UG/user-type-list
http://wiki.tangosol.com/display/COH35UG/pof-config
Thanks,
Everett Williams
Coherence Team

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

How and what to configure in the server configuration files of Tomcat Web ?

Hi,
I am using TCP/IP socket connection pooling in my project. For pooling I have written code, I want once the tomcat webserver starts there should be at least 10 instances of connections to be created in the pool. Could any one please tell me how do I do this in the server configuration files (server.xml or web.xml).
Thanks in Adv.
JitDev2009

Take note: the mbaworld.com site has its Tomcat setup/environment poorly configured that the documentation which came along with Tomcat setup became indexed by Google. It has further completely nothing to do with Tomcat itself. Please refer Tomcat's own homepage at [http://tomcat.apache.org] for the documentation.

RMAN Script & RMAN Configuration

Dear All,
This is the first time i am using RMAN. i just wanted to execute the following RMAN script for a testing purpose, for this what are the RMAN configuration i must have to do before executing this script below:
RMAN> run {
shutdown immediate;
startup mount;
backup database;
alter database open;
}This is my current setup of RMAN
RMAN> show all;
RMAN configuration parameters for database with db_unique_name DP are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'E:\RMAN\';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'E:\APP\10004\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFDP.ORA'; # defaultKindly advice me and give me a very clear study for this above parameters
Regards
HAMEED
Once i execute that script i got this following error :
+RMAN> run {+
+2> shutdown immediate;+
+3> startup mount;+
+4> backup database;+
+5> alter database open;+
+6> };+
database closed
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 770019328 bytes
Fixed Size 1374780 bytes
Variable Size 301991364 bytes
Database Buffers 461373440 bytes
Redo Buffers 5279744 bytes
Starting backup at 18-MAY-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=134 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00006 name=E:\APP\10004\ORADATA\DP\HAMEED01.DBF
input datafile file number=00007 name=E:\APP\10004\ORADATA\DP\ABDUL01.DBF
input datafile file number=00008 name=E:\APP\10004\ORADATA\DP\TEST01.DBF
input datafile file number=00001 name=E:\APP\10004\ORADATA\DP\SYSTEM01.DBF
input datafile file number=00002 name=E:\APP\10004\ORADATA\DP\SYSAUX01.DBF
input datafile file number=00005 name=E:\APP\10004\ORADATA\DP\EXAMPLE01.DBF
input datafile file number=00003 name=E:\APP\10004\ORADATA\DP\UNDOTBS01.DBF
input datafile file number=00004 name=E:\APP\10004\ORADATA\DP\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 18-MAY-11
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/18/2011 17:22:30
ORA-19504: failed to create file "E:\RMAN\"
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
Edited by: Hameed on May 18, 2011 4:59 AM

Dear Chinar, can you please varify this below ,, is it correct,, after given your setup i ran this script,,,
Kindly advice me
Regards
HAMEED
RMAN> run
2> {
3> backup current controlfile;
4> }
Starting backup at 18-MAY-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=143 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
channel ORA_DISK_1: starting piece 1 at 18-MAY-11
channel ORA_DISK_1: finished piece 1 at 18-MAY-11
piece handle=E:\RMAN\FULL_06MCLH66_1_1.BK tag=TAG20110518T180910 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 18-MAY-11
Starting Control File Autobackup at 18-MAY-11
piece handle=E:\RMAN\CFC-796596855-20110518-00 comment=NONE
Finished Control File Autobackup at 18-MAY-11Edited by: Hameed on May 18, 2011 5:55 AM

Step by Step RMAN configuration for full hot backup daily

Dear experts,
i am new to oracle RMAN , i have gone through couple of RMAN guides for configuration ,
i have oracle e-business suite (R12.1.1) and database is ( 11.1.0.7) on red hat enterprise linux 5.3 . All of this is 64 bit.
i have a database about 175 gb which is as usual growing day by day as data entry is taking place.
Untill now we have a cold backup strategy in the midnight 3 am a script down the database and make abc.tar.gz file of 25 gb approx. . This process takes about 100 minutes. But now due to new sales system we want our database up 24/7 .
So we want to configure RMAN hot backup.
I want to take backup on disk.
daily full hot backup.
backupsets
currently database is in no-archivelog
plz help me to proceed with this .
Edited by: user13376823 on Feb 10, 2011 12:17 PM

user13376823 wrote:
Dear all,
i am using this script for my full hot backup ,
run
allocate channel c1 device type disk format '/opt/R12Backups/rman/%U';
allocate channel c2 device type disk format '/opt/R12Backups/rman/%U';
crosscheck backup;
BACKUP DATABASE FORMAT '/opt/R12Backups/rman/proddb_%u_%p_%c';
sql 'alter system switch logfile';
BACKUP ARCHIVELOG ALL DELETE INPUT FORMAT '/opt/R12Backups/rman/archlog%U';
DELETE NOPROMPT OBSOLETE REDUNDANCY =1 device type disk;
DELETE NOPROMPT EXPIRED BACKUPSET OF DATABASE device type disk ;
BACKUP AS COPY CURRENT CONTROLFILE FORMAT '/opt/R12Backups/rman/copy_of_cf_%U';
BACKUP SPFILE FORMAT '/opt/R12Backups/rman/spfile_%U';
release channel c1;
release channel c2;
1.please tell me that it is covering all aspects of a backup . Can i do complete recovery with this backup in case of disaster?
Define "all aspects".
2. i only get database and controlfile backup at my location. There is no backup of archivelogs , What happened with
that ?Without seeing the output that rman generated from running the above block, and without seeing all of the persistent rman settings, it is impossible to diagnose anything. I will say that your script looks overly complex.
Just to give you a point of comparison, here's my setup. First the persistent rman settings. Take note of anything that is NOT marked as "default";
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 3;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/ora00/app/oracle/product/10.2.0/db_1/dbs/snapcf_vlnxora1.f'; # defaultAnd here is my basic "full backup" script
[oracle@vmlnx01 bin]$ cat rman_full.scr
connect target /
show all;
run {
backup incremental level 0 database tag='bkup_vlnxora1_full';
backup archivelog all not backed up 2 times tag='bkup_vlnxora1_arch';
delete noprompt archivelog all backed up 2 times to device type disk;
list backup summary;
report obsolete;
quit

Imac is no longer able to open the Configuration file

Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)

Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5)

No dsn is present in the configuration file in the reporting services 2008

HI i have found this error in the log file of my reporting services ,
when i comes to the Configuration file in that
my DSN path is empty no input code is there in that DSN tags
<DSN>
<DSN/>
it shows the empty tags,
and my Current Report Server Report Credentials are Windows,Service account credentails
will it take the problem or what
We have repair the BIDS setup also still not able to solve my issue.
once this is resolved now able to send the emails using subscriptions.
pls infom abut this , i have sufferd this problem last 20 days.
Please update the above query with high priority
TanQ

Hi Ychinnari,
According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
DSN specify the database server that hosts the report server database connection string. The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
On the Database page, click Change Database.
We can create a new report server database or select an existing database, then click Next.
Connect to the instance of the Database Engine that you will use to create and host the report server database.
Specify properties used to create the database.
Specify the credentials used by the report server to connect to the report server database.
Review the information on the Summary page to verify the settings are correct, and then click Next.
Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
For detail information about Configure a Report Server Database Connection, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Error reading configuration file

I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
[] 2012-12-20 22:46:32,176 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
[] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
 at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
 at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
 at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
 at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
 at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
 at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
 at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
 ... 7 more
Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
 at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
 at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
 at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
 at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
 ... 9 more
I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
Any ideas of why the Validator.bat can't read the configuration file?

I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
I have my license server setup (its the Protected Streaming version).
I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
I am using the local key mode to remove one more variable (I have setup a remote key server as well).
I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
DRM error Major[3363] minor:[0] NSError:(null)]
From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
Colour me frustrated

The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
Thanks

Nicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
 <Product ID="ProPlusVolume">
 <Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
 </Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks

What is RMAN configure file ?

Similar Messages

Maybe you are looking for