Error when installing patch 5983191 during SOA install

Installing SOA Suite 10.1.3.1 with 11g database (11.1.0.6)
Following instructions in note 465159.1 (Known Issues #2) during SOA install.
OPatch fails with:
MISSING_COMPONENT : oracle.j2ee, 10.1.3.1.0
This Oracle Home does not have components/versions required by the patch.
'opatch lsinventory -detail' reports OracleAS J2EE version as 10.1.3.0.0
Please advise.
Edited by: Alan3 on Dec 8, 2008 3:33 PM
BTW, this is on Oracle Enterprise Linux R5...

I gave this a shot not really expecting it to work.
I used OPatch version 1.0.0.0.60 and still get the same error.
I didn't expect it to work because in patch 5983191 the actions file (etc/config/actions) has the j2ee version requirement specified as 10.1.3.1.0.
Here's the contents:
<oneoff_actions>
<oracle.j2ee version="10.1.3.1.0" opt_req="R">
<copy name="wsil-install.xml" path="%ORACLE_HOME%/webservices/lib" file_name="webservices/lib/wsil-install.xml"/>
</oracle.j2ee>
</oneoff_actions>
The SOA install includes j2ee version 10.1.3.0.0 NOT 10.1.3.1.0.
Patch 5983191 is incompatible with this SOA install.
What next?
Is there a j2ee upgrade patch that I can install BEFORE installing 5983191? If so, it's not in the documentation...

Similar Messages

  • How can I reformat my hard drive if erase and partition don't work in disk utility and I get an error when I try to erase and install from the Leopard install disk?  I have had several kernel panics, but the volume shows up in startup disk.

    I have had several kernel panics on my iBook G4; the panic message shows up just after the desktop appears. Although the startup volume shows up in Startup Disk, the installation disk reports an error when I attempt an erase and install. Disk utility is unable either to erase or partition the hard drive. The hard drive shows up in disk utility, but the startup volume doesn’t  HELP!!!

    Do you have the original system discs that came with the iBook when it was new?
    Which exact iBook model is it?
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Erasing the disc and installing Mac OS X 10.5 will result in loss of the other applications (such as the iLife applications) which came pre-installed on the iBook.

  • Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

    Hello experts.
    When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
    Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
    We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
    This is what we've tried so far:
    replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64)  with the new version mentioned in Note 413708.
    tested the connection in SM59 - non successful
    tested the report query with transaction MDXTEST - non successful
    tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
    We have the following config:
    MS server 2003 SP2 x64 ed.
    SAP logon 7.20
    MS SQL server 2005
    CR 2008
    new librfc32.dll version 7200.1.39.6461
    Any ideas on what to try next would be highly appreciated!
    Cheers, IngA

    Hi Ingo.
    We have only one application server.
    I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
    Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
    --IngA
    Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

  • Error when applying patch 3171663(11.5.9 CU2 )..

    hi..
    error when applying patch 3171663(11.5.9 CU2 )
    below error in log file:
    Assigned: file mscplan.odf on worker 1 for product msc username MSC.
    Time is: Sat May 22 2010 21:58:03
    FAILED: file mscplan.odf on worker 1 for product msc username MSC.
    Time is: Sat May 22 2010 21:58:04
    ATTENTION: All workers either have failed or are waiting:
         FAILED: file mscplan.odf on worker 1.
    ATTENTION: Please fix the above failed worker(s) so the manager can continue.
    below error in workerlog.. in adworker1
    ===============================================================================
    The table is missing the index MSC_TRADING_PARTNERS_U2
    or index MSC_TRADING_PARTNERS_U2 exists on another table.
    Create it with the statement:
    Start time for statement below is: Sat May 22 2010 21:58:04
    CREATE UNIQUE INDEX MSC.MSC_TRADING_PARTNERS_U2 ON MSC.MSC_TRADING_PARTNERS
    (SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID) LOGGING STORAGE
    (INITIAL 4K NEXT 40K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0
    FREELIST GROUPS 4 FREELISTS 4 ) PCTFREE 10 INITRANS 11 MAXTRANS 255
    COMPUTE STATISTICS TABLESPACE MSCX
    Statement executed.
    AD Worker error:
    The index cannot be created as the table has duplicate keys.
    Use the following SQL statement to identify the duplicate keys:
    SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
    FROM MSC.MSC_TRADING_PARTNERS
    GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
    HAVING count(*)>1
    AD Worker error:
    Unable to compare or correct tables or indexes or keys
         because of the error above
    Time when worker failed: Sat May 22 2010 21:58:04
    ====================================================================
    My application version :11.5.9
    my database version 8.1.7.4
    Regards
    Jaffer Ali

    >
    Use the following SQL statement to identify the duplicate keys:
    SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
    FROM MSC.MSC_TRADING_PARTNERS
    GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
    HAVING count(*)>1
    >
    Pl post the output of the above statement
    HTH
    Srini

  • Could not get DeploymentManager during SOA install

    I am getting the following error:
    *Could not get DeploymentManager
    This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied. More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.*
    during the SOA install. I am installing 10.1.3.1 and then I was going to patch it to 10.1.3.3. I am installing it on a Windows XP and ironic thing is it has been installed once on this machine without any errors. I started tinkering with some configuration files so I can process large ESB input files and the metadata repository got hosed. I then went to install it again but started getting this error. I am not doing anything differently from the previous successful installation. Issues like these and others in Oracle SOA is forcing our company to seriously start looking at alternatives.
    Thanks for any help.

    Are you sure you have setup the connectivity correctly in JDev. If you have not removed the previous install correctly it could have held on to the ports, therefore the second install does not use the default.
    Things to check is the oc4j container, and the port. Also perform a test to ensure all things are connecting correctly.
    cheers
    James

  • Pacifist error when trying to extract quicktime from install disk

    I get this error when i select the OSX install disk.
    I deleted quicktime by mistake,so i needed to extract it again.
    any info on what is causing this error?

    Hello,
    I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
    Regards
    Andreas

  • Error while creating database instance during PI instalation

    Hi Team,
    I am in the installation phase of SAP PI with MAXDB as back end.In the
    phase "create database instance" i am facing the following issue
    "An error occurred while processing option SAP EHP1 for SAP NetWeaver
    PI/Mobile/Banking 7.1 > MaxDB > SAP Systems > Process Integration >
    Standard System > Standard System( Last error reported by the step:
    Error during execution of command identifier 'ACTIVATE'"
    Can you help me in resolving this issue at the earliest.Also i have attached
    the sapinst_dev log filke in this incident along with the
    error screenshot
    Thanks,
    Satheesh E

    Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE      2014-09-08 16:31:08.874 [syxxcnode.cpp:425]
               CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.1.xml, ISyNode::CopyMoveMode_t 0x3)
               lib=syslib module=syslib
    Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/__instana_tmp.1.xml
    INFO       2014-09-08 16:31:08.905 [synxcpath.cpp:799]
               CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\__instana_tmp.xml.
    TRACE      2014-09-08 16:31:10.796 [cstatisticmanager.cpp:2241]
               CStatisticManager::writeInstallationSlanaFile_Intern
    TRACE      2014-09-08 16:31:10.811 [syxxcfile.cpp:85]
               CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const 
               lib=syslib module=syslib
    Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE      2014-09-08 16:31:10.811 [syxxcnode.cpp:425]
               CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml, ISyNode::CopyMoveMode_t 0x3)
               lib=syslib module=syslib
    Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/instslana.1.xml
    INFO       2014-09-08 16:31:10.811 [synxcfile.cpp:149]
               CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
               lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\instslana.xml.
    INFO       2014-09-08 16:31:10.811 [synxcpath.cpp:799]
               CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW711\ADA\INSTALL\STD\AS\instslana.xml.
    TRACE      2014-09-08 16:31:10.889
    SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
    TRACE      2014-09-08 16:31:15.669 [iaxxgenimp.cpp:638]
                CGuiEngineImp::showMessageBox()
    <html> <head> </head> <body> <p> An error occurred while processing option <i>SAP EHP1 for SAP NetWeaver PI/Mobile/Banking 7.1 > MaxDB > SAP Systems > Process Integration > Standard System > Standard System( Last error reported by the step: Error during execution of command identifier 'ACTIVATE' : <DBMException -24988 ERR_SQL SQL error
    -2014,Identifier too long>)</i>. You can now: </p> <ul> <li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more information about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS. </p> </body></html>
    TRACE      2014-09-08 16:31:15.669 [iaxxgenimp.cpp:1031]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    INFO       2014-09-08 16:31:19.434 [sixxcstepexecute.cpp:1002]
    An error occurred and the user decided to retry the current step: &quot;|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_ADA_DB|ind|ind|ind|ind|nw_ada_db|0|SdbPreInstanceDialogs|ind|ind|ind|ind|preinstance_dialogs|0|SdbInstanceDialogs|ind|ind|ind|ind|instance_dialogs|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|instance_create|0|sdb_instance_activate&quot;.
    INFO       2014-09-08 16:31:19.450 [synxccuren.cpp:887]
               CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS)
               lib=syslib module=syslib
    Working directory changed to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS.
    TRACE      2014-09-08 16:31:19.465 [syxxcfile.cpp:85]
               CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const 
               lib=syslib module=syslib
    Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE      2014-09-08 16:31:19.465 [syxxcnode.cpp:425]
               CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml, ISyNode::CopyMoveMode_t 0x3)
               lib=syslib module=syslib
    Moved C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.xml to C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS/stepLogMessages.2.xml
    TRACE      2014-09-08 16:31:19.497
    Instantiating new NWUsageTypeBasic
    TRACE      2014-09-08 16:31:19.497
    NWUsageTypeBasic() done
    TRACE      2014-09-08 16:31:19.497
      Call block: SDB_INSTANCE_CREATE_ind_ind_ind_ind
        function: SDB_INSTANCE_CREATE_ind_ind_ind_ind_PreStepPhase_sdb_instance_activate_Preprocess
    is validator: false
    TRACE      2014-09-08 16:31:19.543 [sixxcstepexecute.cpp:839]
    Execution of preprocess block of |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_ADA_DB|ind|ind|ind|ind|nw_ada_db|0|SdbPreInstanceDialogs|ind|ind|ind|ind|preinstance_dialogs|0|SdbInstanceDialogs|ind|ind|ind|ind|instance_dialogs|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|instance_create|0|sdb_instance_activate returns TRUE
    TRACE      2014-09-08 16:31:19.575
    Instantiating new NWUsageTypeBasic
    TRACE      2014-09-08 16:31:19.575
    NWUsageTypeBasic() done
    TRACE      2014-09-08 16:31:19.575
      Call block: SDB_INSTANCE_CREATE_ind_ind_ind_ind
        function: SDB_INSTANCE_CREATE_ind_ind_ind_ind_PreStepPhase_sdb_instance_activate
    is validator: false
    TRACE      2014-09-08 16:31:19.621
    WorkDir: C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS
    TRACE      2014-09-08 16:31:19.621
    SdbOperations.callSdbCmdJar() Use java home : C:/Users/EGSAPI~1/AppData/Local/Temp/sapinst_exe.4716.1410173586/jre
    TRACE      2014-09-08 16:31:19.637
    SDB invoking java call:
    C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_sl_lib.jar;C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_sl_lib_api.jar;C:/Program Files/sapinst_instdir/NW711/ADA/INSTALL/STD/AS\sdb_core.jar" com.sap.sdb.core.main.cmd.SdbCmdMain
    TRACE      2014-09-08 16:31:19.637 [synxcchapp.cpp:275]
               CSyChildApplicationImpl::doStart() lib=syslib module=syslib
    Going to call CreateProcess/CreateProcessAsUser for 'C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe' now.
    TRACE      2014-09-08 16:31:19.637 [synxcchapp.cpp:575]
               CSyChildApplicationImpl::doStart() lib=syslib module=syslib
    Trying to start C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe CSySysLibCallsWrapper::syscallwrapper()->__CreateProcess__(NULL, <command line for executable C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
    TRACE      2014-09-08 16:31:19.637 [synxcchapp.cpp:653]
               CSyChildApplicationImpl::doStart() lib=syslib module=syslib
    A child process has been started. Pid = 4956. Executable name: C:\Users\EGSAPI~1\AppData\Local\Temp\sapinst_exe.4716.1410173586\jre\bin\java.exe
    TRACE      2014-09-08 16:31:19.637

  • I get an error when I try to print after installing Lion - worked under Snow Leopard - /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr failed

    I have not been able to print pictures nor any text since installing Lion.  I receive the message in the subject which is totally meaningless.

    When you upgrade from a previous OS there is always a chance that you will bring some setting that is not compatible with the new OS. This can be the driver as noondaywitch suggests but it can also be the core printing system. In the case of the latter, it is a good idea to reset the printing system when a core error occurs. Note that the reset sets the printing system back to default and removes your currently installed printer and scanner queues. But it does not remove the supporting drivers, so you only need to install the driver again.
    How to Reset the Printing System
    1. Open System Preferences > Print & Scan/Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse
    4. Click the "Reset printing system ..." popup
    5. Restart your Mac
    Just one additional thing to note. In checking the supported printer list for 10.6 from Apple, your RC545 is not listed so running the Software Update will not provide you with a driver for this printer. So if Epson does not have a driver for 10.6, and it appears that Apple does not provide one, then what you have already from the previous installation is it. And if this doesn't work, then you may have to look at either an alternate driver or getting another printer. But let's wait and see what happens after the reset.

  • How do I download OS 10.6.7 to an external drive? For some reason it gives me an error when I try to download and install directly to my MacBook Pro.

    How do I download OS 10.6.7 to an external drive?  For some reason I get an error message when I try to download directly to my MacBook Pro from Software Update or from the Apple Downloads site.

    brandonfromcharlton wrote:
    I just had this issue as well.  A work around is to manually install all of the updates, one-by-one.  This may take a while and be a pain, but after this it's freesailing for future updates.  Not sure what the issue is but don't worry, that will fix it.
    BF
    Instead of downloading one by one simply download the 10.6.7 'combo' update from Apples support site, it contains all previous updates in one package.

  • Mesage error when i try to download and install itunes 8

    ive been having trouble downloading itunes 8 for windows on my computer. everytime the file finishes downloading and i try to run it i get a message error that says itunes8/setup is not a valid Win32 application. if anyone knows why its doing this or can help me fix the prolbem id greatly appreciate it.
    thanks

    Have you had a look at this troubleshooting page? It may be of some help: iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

  • Error when applying patch SAPKB62021

    Dear All,
    I have fresh Install SAP 4.7 with SQL 2000. When I am updating basis Support pack i.e SAPKB62021.
    It give messege
    Error in Phase :-XPRA_EXECUTION
    Reasion for error :TP_STEP_FAILURE
    Return Code : 0008
    Please help
    Thanks & Regards

    Hi Anurag,
    Check below notes
    Note 782140 - OCS: Known problems with Support Packages in Basis Rel. 6.20
    Note 537881 - TP stops during execution of SPAM phase XPRA_EXECUTION
    Regards
    Ashok

  • Error when using Patch Set Assistant on DEV_MDS for 11.1.14 upgrade

    I have successfully run the upgrade to SOA 11.1.1.4 from 11.1.1.3, and I am now trying to run the Patch Set Assistant to upgrade the DEV_MDS database schema. But I get the following error:
    Updating the Oracle Fusion Middleware Metadata Schema to release 11.1.1.4.0.
    Updating schema for component Oracle Metadata Services.
    UPGAST-01006: Schema upgrade failed for Oracle Metadata Services.
    The command failed to complete successfully
    I looked at some of the log files, and found the following:
    [2011-02-17T23:24:16.602-08:00] [MDS] [ERROR] [UPGCMP-05501] [upgrade.MDS] [tid: 10] [ecid: 0000IsrdnUk5yW^5xV_AiW1DNXu4000000,0] Oracle Metadata Services schema upgrade is invalid.
    [2011-02-17T23:24:16.602-08:00] [MDS] [ERROR] [] [upgrade.MDS] [tid: 10] [ecid: 0000IsrdnUk5yW^5xV_AiW1DNXu4000000,0] Cause: Specified Metadata Services schema was updated but is invalid. Action: Restore the Metadata Services schema from a backup and retry. Check the error messages in Oracle Metadata service component log files. Correct the problem before running the Assistant again.
    [2011-02-17T23:24:16.602-08:00] [FrameworkMR] [ERROR] [UPGAST-01006] [upgrade.FrameworkMR] [tid: 10] [ecid: 0000IsrdnUk5yW^5xV_AiW1DNXu4000000,0] Schema upgrade failed for Oracle Metadata Services.
    [2011-02-17T23:24:16.602-08:00] [FrameworkMR] [ERROR] [] [upgrade.FrameworkMR] [tid: 10] [ecid: 0000IsrdnUk5yW^5xV_AiW1DNXu4000000,0] Cause: Repository Upgrade framework detected that schema upgrade of the component named in the error message failed. Action: Examine the upgrade log files for additional error messages. It may be possible to correct the problem and retry the upgrade.
    [2011-02-17T23:24:16.602-08:00] [FrameworkMR] [NOTIFICATION] [] [upgrade.FrameworkMR] [tid: 10] [ecid: 0000IsrdnUk5yW^5xV_AiW1DNXu4000000,0] failure_total 1 m_upgradeMode Y
    [2011-02-17T23:24:16.602-08:00] [FrameworkMR] [ERROR] [UPGAST-01015] [upgrade.FrameworkMR] [tid: 10] [ecid: 0000IsrdnUk5yW^5xV_AiW1DNXu4000000,0] Some repository upgrade component-specific software modules report failure.
    [2011-02-17T23:24:16.602-08:00] [FrameworkMR] [ERROR] [] [upgrade.FrameworkMR] [tid: 10] [ecid: 0000IsrdnUk5yW^5xV_AiW1DNXu4000000,0] Cause: One or more component-specific software modules returned an error status during repository upgrade. Some other components might have upgraded successfully. Action: Review the upgrade logs to determine which components have failed, and pinpoint the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to rerun the upgrade.
    And also:
    2011-02-17 23:24:16.102 rcu:Statement Type: 'PL/SQL Statement - Object Type:PACKAGE BODY Object Name:MDS_INTERNAL_COMMON'
    Error encountered executing SQL statement FileName: 'D:\Oracle\Middleware\home_11gPS2\oracle_common\rcu\integration\mds\sql\MDSINCB.plb' LineNumber: '282'
    SQL Statement: [CREATE OR REPLACE PACKAGE BODY                 mds_internal_common wrapped
    a000000
    1
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    abcd
    b
    bc8b 495d
    VOLin4qlIqL/ebAEBNG+TcwkAl4wg13tedD9rcJNOpPklHI/fBQuCnmcF4vgZDJ3ptWICdP/
    FN7xJuWDlvRBUk+t1J+YW4YiHwBnc849mAkgXMKYF9G46ktcJkfKiF/nYDbWNclQldoAtkjt
    Any idea of what went wrong?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    http://niallcblogs.blogspot.com/2011/01/rcu-issue-on-soa-11114-on-xe.html
    http://itnewscast.com/middleware/rcu-issue-soa-11114-xe
    do these help?
    think you only need a recompile

  • Inconsistent DISM.EXE error when applying unattend.xml during LTI deployment - Possible bug!

    I've been using MDT 2012 and 2012 update 1 with ADK for Windows 8 successfully for years.  This week I decided to uninstall those tools, and install ADK for Windows 8.1 and MDT 2013.  I'm running Windows 7 x64.  Instead of upgrading the current
    deployment share, I created a new share to start fresh.
    So, I created a new share, added Windows 7 OS, and created a client deployment task sequence. I modified the unattended.xml to enable telnet client and disable media center.  No drivers, no applications, and no packages for this test.  Stock, unmodified
    task sequence.
    Problem:
    It works as expected sometimes.  But, about 50% of the time, I get this error:
    From the BDD.LOG:
    <![LOG[About to run command: dism.exe /Image:C:\ /Apply-Unattend:C:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="00:16:51.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1224)]LOG]!><time="00:16:51.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Deployment Image Servicing and Management tool]LOG]!><time="00:16:51.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Version: 6.3.9600.16384]LOG]!><time="00:16:51.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Image Version: 6.1.7600.16385]LOG]!><time="00:16:52.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Disabling feature(s)]LOG]!><time="00:16:53.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Disabling feature(s)]LOG]!><time="00:16:58.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Error: 0x80220013]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > DISM failed. No operation was performed. ]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > For more information, review the log file.]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > The DISM log file can be found at X:\windows\Logs\DISM\dism.log]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = -2145255405]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[FAILURE ( 5627 ): -2145255405 0x80220013: Run DISM.exe]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
    <![LOG[Command completed, return code = -2147467259]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
    <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="00:16:59.000+000" date="10-30-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    From the DISM.LOG:
    2013-10-30 00:16:58, Error CSI 00000001 (F) 80220013 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=19 (0x0013)] #5# from CWcmEngineCore::GetNamespaceWithOptions(nsid = { name: Microsoft-Windows-PnpCustomizationsNonWinPE ver: lang: neutral arch: amd64 pkt: 31bf3856ad364e35 verSc: nonSxS }, iMode = 1, iAccess = 2, iOption = 1, target = @0x4c792c0, context = NULL, namespace = { name: Microsoft-Windows-PnpCustomizationsNonWinPE ver: lang: neutral arch: amd64 pkt: 31bf3856ad364e35 verSc: nonSxS })
    [gle=0x80004005]
    2013-10-30 00:16:58, Error CSI 00000002 (F) 80220013 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=19 (0x0013)] #3# from CUnattendDeserializer::ProcessComponentElement(...)[gle=0x80004005]
    2013-10-30 00:16:58, Error CSI 00000003 (F) 80220013 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=19 (0x0013)] #2# from CUnattendDeserializer::ProcessDocument(...)[gle=0x80004005]
    2013-10-30 00:16:58, Error CSI 00000004 (F) 80220013 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=19 (0x0013)] #1# from CUnattendDeserializer::Deserialize(stream = @0x40acf60, engine = @0x4301af0, target = @0x4c792c0, results = NULL, resultCount = 0)[gle=0x80004005]
    2013-10-30 00:16:58, Error DISM DISM Smi Provider: PID=1264 Error deserializing SMI settings. - CSmiWrapper::ApplySettings(hr:0x80220013)
    2013-10-30 00:16:58, Error DISM DISM Smi Provider: PID=1264 d:\w7rtm\base\ntsetup\opktools\dism\providers\smiprovider\dll\smimanager.cpp:166 - CSmiManager::Apply(hr:0x80220013)
    2013-10-30 00:16:58, Error DISM DISM Unattend Manager: PID=1264 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:400 - CUnattendManager::Apply(hr:0x80220013)
    2013-10-30 00:16:58, Error DISM DISM Unattend Manager: PID=1264 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:654 - CUnattendManager::InternalExecuteCmdLine(hr:0x80220013)
    2013-10-30 00:16:58, Error DISM DISM Unattend Manager: PID=1264 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:603 - CUnattendManager::ExecuteCmdLine(hr:0x80220013)
    2013-10-30 00:16:58, Error DISM DISM.EXE: DISM Unattend Manager processed the command line but failed. HRESULT=80220013
    I noticed that it never seems to happen if I don't enable/disable features with the unattended.xml
    unattended.xml that has the problem:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <servicing>
    <package action="configure">
    <assemblyIdentity name="Microsoft-Windows-Foundation-Package" version="6.1.7601.17514" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="" />
    <selection name="TelnetClient" state="true" />
    <selection name="TFTP" state="true" />
    <selection name="FaxServicesClientPackage" state="false" />
    <selection name="MediaCenter" state="false" />
    <selection name="OpticalMediaDisc" state="false" />
    </package>
    </servicing>
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>1</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>.\Operating Systems\Windows 7 Pro x64 SP1\Sources\install.wim</Path>
    <MetaData>
    <Key>/IMAGE/INDEX</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    <ProductKey>
    <Key></Key>
    </ProductKey>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <Credentials>
    <Username></Username>
    <Domain></Domain>
    <Password></Password>
    </Credentials>
    <JoinDomain></JoinDomain>
    <JoinWorkgroup></JoinWorkgroup>
    <MachineObjectOU></MachineObjectOU>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName></ComputerName>
    <ProductKey></ProductKey>
    <RegisteredOrganization>Inc.</RegisteredOrganization>
    <RegisteredOwner>Desktop</RegisteredOwner>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    <TimeZone>Pacific Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>about:blank</Home_Page>
    <DisableWelcomePage>true</DisableWelcomePage>
    <DisableFirstRunWizard>false</DisableFirstRunWizard>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value>UABAAHMAcwB3AG8AcgBkAD0ANwBBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
    <PlainText>false</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value>UABAAHMAcwB3AG8AcgBkAD0ANwBQAGEAcwBzAHcAbwByAGQA</Value>
    <PlainText>false</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization>Inc.</RegisteredOrganization>
    <RegisteredOwner>Desktop</RegisteredOwner>
    <TimeZone></TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    </unattend>
    unattended.xml that is problem-free:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>1</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>.\Operating Systems\Windows 7 Pro x64 SP1\Sources\install.wim</Path>
    <MetaData>
    <Key>/IMAGE/INDEX</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    <ProductKey>
    <Key></Key>
    </ProductKey>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <Credentials>
    <Username></Username>
    <Domain></Domain>
    <Password></Password>
    </Credentials>
    <JoinDomain></JoinDomain>
    <JoinWorkgroup></JoinWorkgroup>
    <MachineObjectOU></MachineObjectOU>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName></ComputerName>
    <ProductKey></ProductKey>
    <RegisteredOrganization>Inc.</RegisteredOrganization>
    <RegisteredOwner>Desktop</RegisteredOwner>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    <TimeZone>Pacific Standard Time</TimeZone>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>about:blank</Home_Page>
    <DisableWelcomePage>true</DisableWelcomePage>
    <DisableFirstRunWizard>false</DisableFirstRunWizard>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value>UABAAHMAcwB3AG8AcgBkAD0ANwBBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
    <PlainText>false</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value>UABAAHMAcwB3AG8AcgBkAD0ANwBQAGEAcwBzAHcAbwByAGQA</Value>
    <PlainText>false</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization>Inc.</RegisteredOrganization>
    <RegisteredOwner>Desktop</RegisteredOwner>
    <TimeZone></TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    </unattend>
    Please help!

    To be honest, I've never tried to modify the installer packages via unattend.xml.  And come to think of it, it appears that the /applyunattend switch may not understand how to install packages (might not know where the sxs folder is located ). What
    is confusing to me is how it *does* work 50% of the time.
    did you import the *full* sources or just the *.wim file?
    Here is a post in the configmgr group which suggests to perform the package management *online*
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/42eb50b6-7059-431c-ae84-2e5753507a90/unattendxml-and-microsoftwindowsfoundationpackage
    Keith Garner - keithga.wordpress.com
    Thanks for the reply Keith.
    I imported the full source, and I'm also not sure why it is not consistent with failure or success either.
    To narrow down the problem, I created a reproducible set of steps (for a possible future call to Microsoft support). Those steps are described in this
    thread.  When following the steps in the thread, the problem appeared every time.  I only tried it 6, or so, times though.
    The enabling/disabling of features via the unattend.xml is a supported and documented feature.  In fact, following the hyperlink in the solution of the thread you mentioned documents the process.
    -Tony

  • Linking error when compiling patched version

    I should understand this stuff better by now
    I'm trying to build a patched version of zoneminder includung the libv4l libraries to better support web cams. In zm_local_camera.cpp I've added
    #include <libv4l2.h>
    #include <libv4l1.h>
    and replaced all the ioctl() open() close() mmap() etc statements with the v4l2_ioctl()v4l2_ open() v4l2_close() v4l2_mmap() etc versions.
    The first stage of compiling goes without error, but then linking (relinking?) stage it bails with this error
    collect: relinking
    zm_local_camera.o: In function `vidioctl(int, int, void*)':
    zm_local_camera.cpp:(.text+0x2ff): undefined reference to `v4l2_ioctl'
    zm_local_camera.o: In function `LocalCamera::PostCapture()':
    zm_local_camera.cpp:(.text+0x4b8): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x50b): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x547): undefined reference to `v4l2_ioctl'
    zm_local_camera.o: In function `LocalCamera::Contrast(int)':
    zm_local_camera.cpp:(.text+0x9f2): undefined reference to `v4l2_ioctl'
    zm_local_camera.o:zm_local_camera.cpp:(.text+0xa1b): more undefined references to `v4l2_ioctl' follow
    zm_local_camera.o: In function `LocalCamera::GetCurrentSettings(char const*, char*, int, bool)':
    zm_local_camera.cpp:(.text+0x1d21): undefined reference to `v4l1_open'
    zm_local_camera.cpp:(.text+0x1d89): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x20a4): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x218d): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x257b): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x26ad): undefined reference to `v4l1_close'
    zm_local_camera.o: In function `LocalCamera::Terminate()':
    zm_local_camera.cpp:(.text+0x3e6f): undefined reference to `v4l1_close'
    zm_local_camera.cpp:(.text+0x3e9f): undefined reference to `v4l1_munmap'
    zm_local_camera.cpp:(.text+0x3f37): undefined reference to `v4l2_munmap'
    zm_local_camera.o: In function `LocalCamera::Initialise()':
    zm_local_camera.cpp:(.text+0x4182): undefined reference to `v4l1_open'
    zm_local_camera.cpp:(.text+0x4775): undefined reference to `v4l2_mmap'
    zm_local_camera.cpp:(.text+0x49b9): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x4a46): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x4a89): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x4ad8): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x4b0a): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x4b9d): undefined reference to `v4l1_mmap'
    zm_local_camera.cpp:(.text+0x560a): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x564d): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x5671): undefined reference to `v4l2_ioctl'
    zm_local_camera.cpp:(.text+0x56a3): undefined reference to `v4l2_ioctl'
    zm_local_camera.o: In function `LocalCamera::PrimeCapture()':
    zm_local_camera.cpp:(.text+0x6018): undefined reference to `v4l2_ioctl'
    collect2: ld returned 1 exit status
    make[2]: *** [zmc] Error 1
    Can someone tell me what I am missing. I will do my homework if someone can just give me a hint.

    The above suggestion worked the last time I built zoneminder, but when I tried upgrading today, with kernel 2.6.31 and the same exact zoneminder release (1.24.2), I'm getting the same error again.  As you can see, -lv4l1 and -lv4l2 are in the g++ command.  This is using the latest gcc package, 4.4.1, and I think the last build might have been on 4.4.0.  I've also upgraded x264 and ffmpeg to svn latest in the last couple of days, but I doubt that should have anything to do with is.  Can somebody help?  Thanks.
    make  all-recursive
    make[1]: Entering directory `/home/ben/abs/zoneminder/src/ZoneMinder-1.24.2'
    Making all in src
    make[2]: Entering directory `/home/ben/abs/zoneminder/src/ZoneMinder-1.24.2/src'
    g++ -frepo -march=x86-64 -mtune=generic -O2 -pipe  -L/usr/lib -L/usr/lib/mysql -Wl,--hash-style=gnu -Wl,--as-needed -lv4l1 -lv4l2 -o zmc  zmc.o zm_box.o zm_buffer.o zm_camera.o zm_comms.o zm_config.o zm_coord.o zm.o zm_db.o zm_debug.o zm_event.o zm_exception.o zm_file_camera.o zm_ffmpeg_camera.o zm_image.o zm_jpeg.o zm_local_camera.o zm_monitor.o zm_ffmpeg.o zm_mpeg.o zm_poly.o zm_regexp.o zm_remote_camera.o zm_remote_camera_http.o zm_remote_camera_rtsp.o zm_rtp.o zm_rtp_ctrl.o zm_rtp_data.o zm_rtp_source.o zm_rtsp.o zm_sdp.o zm_signal.ozm_stream.o zm_thread.o zm_time.o zm_timer.o zm_user.o zm_utils.o zm_zone.o  -lz -lbz2 -lswscale -lavformat -lavcodec -lavutil -lpcre -lcrypto -ldl -lpthread -ljpeg -lmysqlclient
    zm_local_camera.o: In function `vidioctl(int, int, void*)':
    zm_local_camera.cpp:(.text+0x28f): undefined reference to `v4l2_ioctl'
    zm_local_camera.o: In function `LocalCamera::PostCapture()':
    zm_local_camera.cpp:(.text+0x454): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x4a5): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x4de): undefined reference to `v4l1_ioctl'
    zm_local_camera.o: In function `LocalCamera::Contrast(int)':
    zm_local_camera.cpp:(.text+0x86b): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x891): undefined reference to `v4l1_ioctl'
    zm_local_camera.o:zm_local_camera.cpp:(.text+0xa6b): more undefined references to `v4l1_ioctl' follow
    zm_local_camera.o: In function `LocalCamera::GetCurrentSettings(char const*, char*, int, bool)':
    zm_local_camera.cpp:(.text+0x1866): undefined reference to `v4l1_open'
    zm_local_camera.cpp:(.text+0x18c8): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x1bbb): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x1c93): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x205a): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x2159): undefined reference to `v4l1_close'
    zm_local_camera.o: In function `LocalCamera::Terminate()':
    zm_local_camera.cpp:(.text+0x367d): undefined reference to `v4l1_close'
    zm_local_camera.cpp:(.text+0x36ac): undefined reference to `v4l1_munmap'
    zm_local_camera.cpp:(.text+0x3755): undefined reference to `v4l2_munmap'
    zm_local_camera.o: In function `LocalCamera::Initialise()':
    zm_local_camera.cpp:(.text+0x3939): undefined reference to `v4l1_open'
    zm_local_camera.cpp:(.text+0x3eaa): undefined reference to `v4l2_mmap'
    zm_local_camera.cpp:(.text+0x409d): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x413d): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x41ab): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x4207): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x4233): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x42aa): undefined reference to `v4l1_mmap'
    zm_local_camera.cpp:(.text+0x45e7): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x4633): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x4650): undefined reference to `v4l1_ioctl'
    zm_local_camera.cpp:(.text+0x467c): undefined reference to `v4l1_ioctl'
    zm_local_camera.o: In function `LocalCamera::PrimeCapture()':
    zm_local_camera.cpp:(.text+0x5320): undefined reference to `v4l1_ioctl'
    collect2: ld returned 1 exit status
    make[2]: *** [zmc] Error 1
    make[2]: Leaving directory `/home/ben/abs/zoneminder/src/ZoneMinder-1.24.2/src'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/home/ben/abs/zoneminder/src/ZoneMinder-1.24.2'
    make: *** [all] Error 2

  • When i apply patch 43worker occur afcmgf.odf error when apply patch 4334965

    when i apply patch 4334965, it occur error with: FAILED: file afcmgr.odf on worker 14 for product fnd username APPLSYS.
    then the others worker's status is wait, how to resolve? and how did i know what's wrong?

    Fadi,
    Thanks a lot for you information, it is very helpful.
    I am new to APPS, I did not know how to handle it last night
    Another question, if I initiate another session to adctl to restart the failed worker, will the adpatch resume automatically?
    Thanks,
    Hank

Maybe you are looking for

  • Calling report from FORM - error Invalid value of paramente 'P_YEAR'

    Hi guys, Could you please help me to figure out what is going wrong with my form which run a report? I am using Developer suite 10g. when i run report from report application it run fine, but when i call that report from a form it gives me error. I h

  • Used webclip and now can't access dashboard

    I used web-clip (for the first time!).  I guess there are some "bad" links on the portion I clipped because now everytime I access dashboard (be it from hot corner, launch pad, mission control) it flashes to dashboard but then immediately goes back t

  • Ipod always starts at the beginning.

    it used to work fine, started back at the song I shut it down with, and now it doesn't. it goes right back to the very first song again, making me have to forward through all the songs to get where i was. also starts all play lists in backward order.

  • Import contacts from Google gmail into iPad2?

    How do I import contacts from Google gmail into the iPAD2?

  • Central Inventory was not created with rapid Install Version 12.1.1.9

    Hi, I have installed a new R12.1.1 E-Business environment on HP-UX Itanium-64 bit., by following the below note, Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for HP-UX Itanium [ID 762891.1] Everything was running fine wi