Could not get DeploymentManager during SOA install
I am getting the following error:
*Could not get DeploymentManager
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied. More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.*
during the SOA install. I am installing 10.1.3.1 and then I was going to patch it to 10.1.3.3. I am installing it on a Windows XP and ironic thing is it has been installed once on this machine without any errors. I started tinkering with some configuration files so I can process large ESB input files and the metadata repository got hosed. I then went to install it again but started getting this error. I am not doing anything differently from the previous successful installation. Issues like these and others in Oracle SOA is forcing our company to seriously start looking at alternatives.
Thanks for any help.
Are you sure you have setup the connectivity correctly in JDev. If you have not removed the previous install correctly it could have held on to the ports, therefore the second install does not use the default.
Things to check is the oc4j container, and the port. Also perform a test to ensure all things are connecting correctly.
cheers
James
Similar Messages
-
[java] Failed at "Could not get DeploymentManager".
I am running the second example in the BPEL Help tutorial. In that we are supposed to run ant from tutorials\127.OrderBookingTutorial\PriceQuote and it gives error because it is not able to resolve
my PC name 5mq9p91. I changed couple of build.properties files and for hostname put in the IP address, so some of these worked, but some of the places still have 5mq9p91 causing FAILURE.
Where does ant get my machine name, how I can get it to pull full qualified name or the IP address?
ERROR:
[echo] Deploying SelectManufacturingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home -file C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI/SelectManufacturingUI.ear ..."
[java] Failed at "Could not get DeploymentManager".
(1. EXECUTION OF ANT BELOW)
Actual problem is once I complete this exercise, partner link has compilation error, because the WSDL does not have complete qualified PC name.
In the WSDL you can see the reference to "soap:address location="http://5MQ9P91:8888/orabpel/default/RapidDistributors/1.0""
how do I change this to have complete qualified address?
Actual Error:
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "http://11.111.111.11:8888/orabpel/default/RapidDistributors/RapidDistributors?wsdl". The reason is http://5MQ9P91:8888/orabpel/xmllib/ws-addressing.xsd.
Please verify the schemas defined in wsdl.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
(2. RapidDistributors WSDL INFO BELOW)
Few things I did to solve the problem, without much success:
Installed BPEL and when I use firefox I get DNS Lookup Error
http://5mq9p91:8888/
Now if I use http://5mq9p91.na.zzzzz.net:8888/ it works fine and if I use the IP address it works fine.
Have the same problem with IE, but after putting entried in C:\WINDOWS\system32\drivers\etc\hosts file problem went away.
I also added DNS Suffix na.zzzzz.com in the Control Panel --> Network --> TCP/IP --> Advanced --> DNS Tab
(3. IPCONFIG /ALL DETAILS BELOW)
1. EXECUTION OF ANT
C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote>ant
Buildfile: build.xml
RapidDistributors:
Trying to override old definition of task customize
pre-build:
validateTask:
[echo]
[echo] --------------------------------------------------------------
[echo] | Validating workflow
[echo] --------------------------------------------------------------
[echo]
[validateTask] Validation of workflow task definitions is completed without errors
compile:
[echo]
[echo] --------------------------------------------------------------
[echo] | Compiling bpel process RapidDistributors, revision 1.0
[echo] --------------------------------------------------------------
[echo]
[bpelc] validating "C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\RapidDistributors\bpel\RapidDistributors.bpel" ...
[bpelc] BPEL suitcase generated in: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\RapidDistributors\output\bpel_RapidDistributors_1.0.jar
deployProcess:
[echo]
[echo] --------------------------------------------------------------
[echo] | Deploying bpel process RapidDistributors on 11.111.111.11, port 8888
[echo] --------------------------------------------------------------
[echo]
[deployProcess] Deploying process C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\RapidDistributors\output\bpel_RapidDistributors_1.0.jar
[deployProcess] Successfully deployed the process "RapidDistributors" on server "11.111.111.11" and port "8888"
deployTaskForm:
[echo]
[echo] --------------------------------------------------------------
[echo] | Deploying workflow form for RapidDistributors on 11.111.111.11, port 8888
[echo] --------------------------------------------------------------
[echo]
[deployTaskForm] There are no forms to deploy
deployDecisionServices:
[echo]
[echo] --------------------------------------------------------------
[echo] | Deploying decision services for RapidDistributors on 11.111.111.11, port 8888
[echo] --------------------------------------------------------------
[echo]
[deployDecisionServices] There are no decision services to deploy
process-deploy:
post-build:
deploy:
SelectManufacturing:
Trying to override old definition of task customize
pre-build:
validateTask:
[echo]
[echo] --------------------------------------------------------------
[echo] | Validating workflow
[echo] --------------------------------------------------------------
[echo]
[validateTask] url is file:/C:/home/bpel/ProcessManager/product/10.1.3.1/OracleAS_1/bpel/system/services/schema/WorkflowTaskDefinition.xsd
[validateTask] Validation of workflow task definitions is completed without errors
compile:
[echo]
[echo] --------------------------------------------------------------
[echo] | Compiling bpel process SelectManufacturing, revision 1.0
[echo] --------------------------------------------------------------
[echo]
[bpelc] validating "C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturing\bpel\SelectManufacturing.bpel" ...
[bpelc] BPEL suitcase generated in: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturing\output\bpel_SelectManufacturing_1.0.jar
deployProcess:
[echo]
[echo] --------------------------------------------------------------
[echo] | Deploying bpel process SelectManufacturing on 11.111.111.11, port 8888
[echo] --------------------------------------------------------------
[echo]
[deployProcess] Deploying process C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturing\output\bpel_SelectManufacturing_1.0.jar
[deployProcess] Successfully deployed the process "SelectManufacturing" on server "11.111.111.11" and port "8888"
deployTaskForm:
[echo]
[echo] --------------------------------------------------------------
[echo] | Deploying workflow form for SelectManufacturing on 11.111.111.11, port 8888
[echo] --------------------------------------------------------------
[echo]
[deployTaskForm] 07/07/12 09:22:47 Notification ==>Application Deployer for default_SelectManufacturing_1_0_Approval STARTS.
[deployTaskForm] 07/07/12 09:22:47 Notification ==>Undeploy previous deployment
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\j2ee\home\applications\default_SelectManufacturing_1_0_Approval.ear begins...
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\j2ee\home\applications\default_SelectManufacturing_1_0_Approval.ear ends...
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Starting application : default_SelectManufacturing_1_0_Approval
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Initializing ClassLoader(s)
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Initializing EJB container
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Loading connector(s)
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Starting up resource adapters
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Initializing EJB sessions
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Committing ClassLoader(s)
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize workflowform begins...
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize workflowform ends...
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Started application : default_SelectManufacturing_1_0_Approval
[deployTaskForm] 07/07/12 09:22:48 Notification ==>Application Deployer for default_SelectManufacturing_1_0_Approval COMPLETES. Operation time: 718 msecs
[deployTaskForm] Successfully deployed form on server "11.111.111.11"
deployDecisionServices:
[echo]
[echo] --------------------------------------------------------------
[echo] | Deploying decision services for SelectManufacturing on 11.111.111.11, port 8888
[echo] --------------------------------------------------------------
[echo]
[deployDecisionServices] There are no decision services to deploy
process-deploy:
post-build:
deploy:
SelectManufacturingUI:
Trying to override old definition of task customize
deploy:
[echo] Deploying SelectManufacturingUI from C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI:
[echo]
schemac:
build_ear:
[jar] Building jar: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.war
[ear] Building ear: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.ear
deployOc4j:
deployBindWebAppOc4j:
deployIas_10gR2:
deployBindWebAppIas_10gR2:
deployIas_10gR3:
[echo] Deploying SelectManufacturingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home -file C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI/SelectManufacturingUI.ear ..."
[java] Failed at "Could not get DeploymentManager".
[java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
[java] Java Result: 1
deployBindWebAppIas_10gR3:
[echo] Binding WebAp SelectManufacturingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home ..."
[java] Failed at "Could not get DeploymentManager".
[java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
[java] Java Result: 1
deployBindWebAppIas:
deployOraclej2ee:
deployNonOraclej2ee:
[delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.war
[delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.ear
CreateOrderBookingUI:
Trying to override old definition of task customize
deploy:
[echo] Deploying CreateOrderBookingUI from C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI/jsp:
[echo]
schemac:
build_ear:
[jar] Building jar: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.war
[ear] Building ear: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.ear
deployOc4j:
deployBindWebAppOc4j:
deployIas_10gR2:
deployBindWebAppIas_10gR2:
deployIas_10gR3:
[echo] Deploying CreateOrderBookingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home -file C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI/CreateOrderBookingUI.ear ..."
[java] Failed at "Could not get DeploymentManager".
[java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
[java] Java Result: 1
deployBindWebAppIas_10gR3:
[echo] Binding WebAp CreateOrderBookingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home ..."
[java] Failed at "Could not get DeploymentManager".
[java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
[java] Java Result: 1
deployBindWebAppIas:
deployOraclej2ee:
deployNonOraclej2ee:
[delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.war
[delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.ear
deploy:
BUILD SUCCESSFUL
Total time: 50 seconds
C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote>
2. RapidDistributors WSDL INFO
http://11.111.111.11:8888/orabpel/default/RapidDistributors/RapidDistributors?wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions name="RapidDistributors" targetNamespace="http://xmlns.oracle.com/RapidDistributors" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/RapidDistributors" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:ns1="http://www.globalcompany.com/ns/sales" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/RapidDistributors">
- <types>
- <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/RapidDistributors" xmlns="http://www.w3.org/2001/XMLSchema">
- <element name="RapidDistributorsProcessRequest">
- <complexType>
- <sequence>
<element name="input" type="string" />
</sequence>
</complexType>
</element>
- <element name="RapidDistributorsProcessResponse">
- <complexType>
- <sequence>
<element name="result" type="string" />
</sequence>
</complexType>
</element>
</schema>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://www.globalcompany.com/ns/sales" schemaLocation="OrderBookingPO.xsd" />
</schema>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://5MQ9P91:8888/orabpel/xmllib/ws-addressing.xsd" />
</schema>
</types>
- <message name="RapidDistributorsResponseMessage">
<part name="payload" element="ns1:SupplierInfo" />
</message>
- <message name="RapidDistributorsRequestMessage">
<part name="payload" element="ns1:OrderItems" />
</message>
- <message name="WSAMessageIDHeader">
<part name="MessageID" element="wsa:MessageID" />
</message>
- <message name="WSAReplyToHeader">
<part name="ReplyTo" element="wsa:ReplyTo" />
</message>
- <message name="WSARelatesToHeader">
<part name="RelatesTo" element="wsa:RelatesTo" />
</message>
- <portType name="RapidDistributorsCallback">
- <operation name="onResult">
<input message="tns:RapidDistributorsResponseMessage" />
</operation>
</portType>
- <portType name="RapidDistributors">
- <operation name="initiate">
<input message="tns:RapidDistributorsRequestMessage" />
</operation>
</portType>
- <binding name="RapidDistributorsBinding" type="tns:RapidDistributors">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="initiate">
<soap:operation style="document" soapAction="initiate" />
- <input>
<soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle="" />
<soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <binding name="RapidDistributorsCallbackBinding" type="tns:RapidDistributorsCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="onResult">
<soap:operation style="document" soapAction="onResult" />
- <input>
<soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <service name="RapidDistributorsCallbackService">
- <port name="RapidDistributorsCallbackPort" binding="tns:RapidDistributorsCallbackBinding">
<soap:address location="http://set.by.caller" />
</port>
</service>
- <service name="RapidDistributors">
- <port name="RapidDistributorsPort" binding="tns:RapidDistributorsBinding">
<soap:address location="http://5MQ9P91:8888/orabpel/default/RapidDistributors/1.0" />
</port>
</service>
- <plnk:partnerLinkType name="RapidDistributors">
- <plnk:role name="RapidDistributorsProvider">
<plnk:portType name="tns:RapidDistributors" />
</plnk:role>
- <plnk:role name="RapidDistributorsRequester">
<plnk:portType name="tns:RapidDistributorsCallback" />
</plnk:role>
</plnk:partnerLinkType>
</definitions>
3. IPCONFIG /ALL DETAILS
C:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : 5MQ9P91
Primary Dns Suffix . . . . . . . : na.zzzzz.net
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : na.zzzzz.net
na.zzzzz.net
zzzzz.net
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : na.zzzzz.net
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
Physical Address. . . . . . . . . : 00-13-72-BA-E2-DF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 11.111.111.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 13.141.178.1
DHCP Server . . . . . . . . . . . : 13.135.65.50
DNS Servers . . . . . . . . . . . : 13.135.0.11
13.135.0.13
13.151.1.16
Primary WINS Server . . . . . . . : 13.135.65.50
Secondary WINS Server . . . . . . : 13.151.32.32
Lease Obtained. . . . . . . . . . : Wednesday, July 11, 2007 6:02:29 PM
Lease Expires . . . . . . . . . . : Monday, July 16, 2007 6:02:29 PM
Ethernet adapter {4AC576C8-F05E-422F-BA75-A986D1994DDF}:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport
Physical Address. . . . . . . . . : 44-45-53-54-42-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . :
C:\>Solution:
C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\utilities\ant-orabpel.properties
changed hostname and put in the IP Address, and this worked.
But now that I run ANT it still has the "Could not get DeploymentManager" problem, so it was not because of machine name translation.
so now what?
more over, actual problem is to fix the WSDL file:
"http://11.111.111.11:8888/orabpel/default/RapidDistributors/RapidDistributors?wsdl".
If WSDL file is fixed my tutorial example may work....
Any body...please help!!!! -
[DeployDecisionServices] Failed at "Could not get DeploymentManager"
Hi Everyone,
I've a small deployment issues which you guys might be able to help me with. I've created a simple business rule using Oracle Business Rule in my embedded OC4J instance and I've also created a BPEL project that consumes this Oracle Business Rule as a "decision service". All is fine until I deploy the BPEL project to my local machine, ANT returns the following messages in the Apache Ant of the Jdeveloper console:
--- START ---
Buildfile: C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\build.xml
validateTask:
[echo]
| Validating workflow
[validateTask] Validation of workflow task definitions is completed without errors
deployProcess:
[echo]
| Deploying bpel process BPELProcess1 on localhost, port 8888
[deployProcess] Deploying process C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\output\bpel_BPELProcess1_1.0.jar
[deployProcess] Successfully deployed the process "BPELProcess1" on server "localhost" and port "8888"
deployTaskForm:
[echo]
| Deploying workflow form for BPELProcess1 on localhost, port 8888
[deployTaskForm] There are no forms to deploy
deployDecisionServices:
[echo]
| Deploying decision services for BPELProcess1 on localhost, port 8888
[deployDecisionServices] Start of deploying decision services.
[deployDecisionServices] Deploy decision service in directory C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService
[deployDecisionServices] Start deploying decision service from directory C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService to J2EE context /rules/default/BPELProcess1/1.0/DecisionService
[deployDecisionServices] Replace placeholders in file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\wsdl\DecisionService.wsdl
[deployDecisionServices] Replace placeholders in file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\wsdl\DecisionService.wsdl done.
[deployDecisionServices] Replace placeholders in file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\public_html\GetDecisionServiceInfo.jsp
[deployDecisionServices] Replace placeholders in file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\public_html\GetDecisionServiceInfo.jsp done.
[deployDecisionServices] Start compiling fact type classes in directory C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes
[deployDecisionServices] Compiling from shell, src=C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes, classpath=C:\Jdeveloper10.132\jdev\lib\ojc.jar;C:\Jdeveloper10.132\ant\lib\ant-oracle.jar;C:\Jdeveloper10.132\integration\lib\orabpel.jar;C:\Jdeveloper10.132\integration\lib\orabpel-ant.jar;C:\Jdeveloper10.132\integration\lib\orabpel-common.jar;C:\Jdeveloper10.132\integration\lib\orabpel-thirdparty.jar;C:\Jdeveloper10.132\webservices\lib\orawsdl.jar;C:\Jdeveloper10.132\lib\xmlparserv2.jar;C:\Jdeveloper10.132\lib\xml.jar;C:\Jdeveloper10.132\j2ee\home\lib\oc4j-internal.jar;C:\Jdeveloper10.132\j2ee\home\lib\adminclient.jar;C:\Jdeveloper10.132\integration\bpm\support\files;C:\Jdeveloper10.132\jdev\lib\jdev.jar;C:\Jdeveloper10.132\ant\lib\xml-apis.jar;C:\Jdeveloper10.132\ant\lib\xercesImpl.jar;C:\Jdeveloper10.132\ant\lib\jakarta-oro-2.0.8.jar;C:\Jdeveloper10.132\ant\lib\commons-net-1.3.0.jar;C:\Jdeveloper10.132\ant\lib\ant.jar;C:\Jdeveloper10.132\ant\lib\ant-xslp.jar;C:\Jdeveloper10.132\ant\lib\ant-xalan1.jar;C:\Jdeveloper10.132\ant\lib\ant-weblogic.jar;C:\Jdeveloper10.132\ant\lib\ant-vaj.jar;C:\Jdeveloper10.132\ant\lib\ant-trax.jar;C:\Jdeveloper10.132\ant\lib\ant-swing.jar;C:\Jdeveloper10.132\ant\lib\ant-stylebook.jar;C:\Jdeveloper10.132\ant\lib\ant-starteam.jar;C:\Jdeveloper10.132\ant\lib\ant-oracle-adfp.jar;C:\Jdeveloper10.132\ant\lib\ant-nodeps.jar;C:\Jdeveloper10.132\ant\lib\ant-netrexx.jar;C:\Jdeveloper10.132\ant\lib\ant-launcher.jar;C:\Jdeveloper10.132\ant\lib\ant-junit.jar;C:\Jdeveloper10.132\ant\lib\ant-jsch.jar;C:\Jdeveloper10.132\ant\lib\ant-jmf.jar;C:\Jdeveloper10.132\ant\lib\ant-jdepend.jar;C:\Jdeveloper10.132\ant\lib\ant-javamail.jar;C:\Jdeveloper10.132\ant\lib\ant-jai.jar;C:\Jdeveloper10.132\ant\lib\ant-icontract.jar;C:\Jdeveloper10.132\ant\lib\ant-commons-net.jar;C:\Jdeveloper10.132\ant\lib\ant-commons-logging.jar;C:\Jdeveloper10.132\ant\lib\ant-apache-resolver.jar;C:\Jdeveloper10.132\ant\lib\ant-apache-regexp.jar;C:\Jdeveloper10.132\ant\lib\ant-apache-oro.jar;C:\Jdeveloper10.132\ant\lib\ant-apache-log4j.jar;C:\Jdeveloper10.132\ant\lib\ant-apache-bsf.jar;C:\Jdeveloper10.132\ant\lib\ant-apache-bcel.jar;C:\Jdeveloper10.132\ant\lib\ant-antlr.jar;C:\Jdeveloper10.132\jdk\lib\tools.jar
[deployDecisionServices] Source file exists. Read Java source file names.
[deployDecisionServices] Adding C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/Applicant.java to the list of Java sources to compile.
[deployDecisionServices] Adding C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/ApplicantImpl.java to the list of Java sources to compile.
[deployDecisionServices] Adding C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/Applicantinfo.java to the list of Java sources to compile.
[deployDecisionServices] Adding C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/ApplicantinfoImpl.java to the list of Java sources to compile.
[deployDecisionServices] Adding C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/ObjectFactory.java to the list of Java sources to compile.
[deployDecisionServices] Adding C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/PersonInfo.java to the list of Java sources to compile.
[deployDecisionServices] Adding C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/PersonInfoImpl.java to the list of Java sources to compile.
[deployDecisionServices] Compiled class(es) "C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/Applicant.java, C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/ApplicantImpl.java, C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/Applicantinfo.java, C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/ApplicantinfoImpl.java, C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/ObjectFactory.java, C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/PersonInfo.java, C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\classes\sample/PersonInfoImpl.java"
[deployDecisionServices] Compilation of fact type classes done.
[deployDecisionServices] Delete file DecisionService-web.war
[deployDecisionServices] Generating the web archive DecisionService-web.war in directory C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\ear
[deployDecisionServices] Restore WSDL template file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\WEB-INF\wsdl\DecisionService.wsdl
[deployDecisionServices] Restore JSP template file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\war\public_html\GetDecisionServiceInfo.jsp
[deployDecisionServices] Replace placeholders in file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\ear\META-INF\application.xml
[deployDecisionServices] Replace placeholders in file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\ear\META-INF\application.xml done.
[deployDecisionServices] Delete file DecisionService.ear
[deployDecisionServices] Generating the application archive DecisionService.ear in directory C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService
[deployDecisionServices] Restore template file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\ear\META-INF\application.xml.template
[deployDecisionServices] Deploying web service to platform oc4j_10g
[deployDecisionServices] Start of deploying DecisionService.ear to ias
[deployDecisionServices] java oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline deployer:oc4j:localhost:23791 oc4jadmin welcome1 -deploy -file C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\decisionservices\DecisionService\DecisionService.ear -deploymentName rules_default_BPELProcess1_1_0_DecisionService
[deployDecisionServices] Start of deploy apps
[deployDecisionServices]
[deployDecisionServices]
[deployDecisionServices] Failed at "Could not get DeploymentManager".
[deployDecisionServices]
[deployDecisionServices] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[deployDecisionServices]
[deployDecisionServices] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
[deployDecisionServices]
[deployDecisionServices]
[deployDecisionServices] Error in ant execution: null
BUILD FAILED
C:\Jdeveloper10.132\jdev\mywork\BPEL with Oracle Business Rule\BPELProcess1\build.xml:116: Error while deploying decision services on server "localhost"
Total time: 1 minute 37 seconds
--- END ---
It is able to deploy the BPEL artifact but unable for the decision service, i.e. the Business Rule. I've been looking at web resources for answers but unable to find one. Your assistance is much appreciated and my gut feeling is that it is only a minor glitch which I need to fix. Thank you very much everyone.
Regards,
JohnHi Everyone,
I've resolved the error. It was the fact that I was pointing to the wrong rmi port. I found out by typing out the "opmnctl status -l" on the command line and realised that my rmi port was 12401 instead of 23791. Hence, under the "deployDecisionServices" namespace in the build.xml file, I modified it from "rmiport="${rmiport}" to "rmiport="12401"" and deploy it and everything works. Thank you everyone for your time and efforts.
Regards,
John -
SOADEMO - deploying SOAOrderBooking build.xml "Could not get Deployment M..
Hi All, I have seen a few issues with the SOA demo but still not able to resolve my issue so posting a thread.
First off using SOA suite 10.1.3.1.0 and Jdev 10.1.3.1.0, so the same versions. Downloaded the demo from the same oracle page as downloaded suite from etc so should be compatible. Installed SOA Suite on an OE Linux 4 update 5 install. Using jdev on Vista laptop. I appreciate that these are not the most current versions but they should work as on the Oracle site and I am not able to install newer versions for the next few weeks.
Going through the install guide for the demo and hitting a problem with deploying the build.xml for SOAOrderBooking as a few others have. The first error I am getting is:
[deployDecisionServices] Failed at "Could not get DeploymentManager".
I have checked the build.properties file which matches exactly that from the 'SelectManufacturer' which deployed fine.
One of the main differences between these two is that the 'SelectManufacturer' does not have any decision services.
One thread I saw suggested changing in the properties file
platform=ias_10g
#platform=oc4j_10g
to
# platform=ias_10g
platform=oc4j_10g
I did do this and the deployment when further but then fails at a later stage. I should not have to make this change anyway as I am using ias_10g so I have gone back to the original. Why would this change allow me to get further?? Appreciate any comments on this bit apart from my general problem.
Any ideas why the deployment of the decision services would fail?
I have spent a fair bit of time as you do trying to resolve it but no luck so any help greatly appreciated. Searched google, metalink, technet etc.
FYI I have edited the properties file to use a different port for HTTP etc. Again these settings worked fine for 'SelectManufacturer' so do not think there is a problem with the URI being used.
Also appreciate on debugging could anyone tell me under the IAS control panel which log component I should set to get some more debug info on this deployment error. I have tried a few without success and cannot find a clear explanation of the various component logs.
Thanks for reading my post CelHi James, thanks again for your reply.
I went on to the linux server and ran the below to validate the URI:
/oracle/product/10.1.3.1/OracleAS_1/jdk/bin/java -jar /oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://del4100.cel:6003/appserver/oc4j_soa oc4jadmin <password> -validateURI
This is the same command being executed by jdeveloper when I try to deploy the decision service.
I get the same error as with jdev:
Failed at "Could not get DeploymentManager".
I had a further look at the command and omitted the name of the application server instance which in my case is 'appserver', the default when you install SOA Suite.
so now ran:
/oracle/product/10.1.3.1/OracleAS_1/jdk/bin/java -jar /oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://del4100.cel:6003/oc4j_soa oc4jadmin <password> -validateURI
This validated the successfully. Went back to jdev and commented out the line from the build.properties:
# asinstancename=appserver
Re-ran the ant build and this time the deployment of the decision service succeeded.
This has now failed on the next stage of the build on compiling the bpel process SOAOrderBooking which I shall look at now.
Do you know why the above would not work with the appserver instance name. I have checked and it is the correct name and spelling?
I have another error now on the next stage of the build and wonder if this is related to it.
The error I am getting is that could not read the wsdl and:
Error happened when reading wsdl at "http://localhost:7777/esb/wsil/Fulfillment/OrderFulfillment?wsdl", because "Failed to read wsdl file at: "http://localhost:7777/esb/wsil/Fulfillment/OrderFulfillment?wsdl", caused by: java.net.ConnectException. : Connection refused: connect".
Thanks for your suggestions and welcome any other comments on this next error as I wonder if it is related to the first one that I have worked around.
Thanks Cel -
Problem in the setup of oracle soa " could not get deployment manage"
hi,
i'm trying to install Oracle SOA with oracle database XE, but i'm having an error message in the oracle bpel process manager configuration assistant: 'could not get deployment manage'..
can u help me please!!!Is the database up and running, can you connect to the orabpel user?
cheers
James -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
ThanksLiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well... -
Directory configuration could not be completed during instal
Scenario:
1) New install sles 11 + oes 11
2) Have backup of domain and postoffice from a dead Groupwise 8 server
3) Upgraded to Groupwise 2014 using copies of the Backup of domain and post office copied onto new server.
4) Everything works - or seems to.
BUT Admin Notifications show this message
1001 (notification ID)
GWAdmin
Directory configuration could not be completed during install. It is required for MTA sync.
Is this a problem?
Thanks - Darylbrowndj wrote on 09/29/2014 01:46 PM:
> Now how do I delete this thread
You don't. Others may run into the same problem and benefit from your solution when they stumble across this thread, so thanks for sharing :-)
Uwe
Novell Knowledge Associate
Please don't send me support related e-mail unless I ask you to do so. -
Error when installing patch 5983191 during SOA install
Installing SOA Suite 10.1.3.1 with 11g database (11.1.0.6)
Following instructions in note 465159.1 (Known Issues #2) during SOA install.
OPatch fails with:
MISSING_COMPONENT : oracle.j2ee, 10.1.3.1.0
This Oracle Home does not have components/versions required by the patch.
'opatch lsinventory -detail' reports OracleAS J2EE version as 10.1.3.0.0
Please advise.
Edited by: Alan3 on Dec 8, 2008 3:33 PM
BTW, this is on Oracle Enterprise Linux R5...I gave this a shot not really expecting it to work.
I used OPatch version 1.0.0.0.60 and still get the same error.
I didn't expect it to work because in patch 5983191 the actions file (etc/config/actions) has the j2ee version requirement specified as 10.1.3.1.0.
Here's the contents:
<oneoff_actions>
<oracle.j2ee version="10.1.3.1.0" opt_req="R">
<copy name="wsil-install.xml" path="%ORACLE_HOME%/webservices/lib" file_name="webservices/lib/wsil-install.xml"/>
</oracle.j2ee>
</oneoff_actions>
The SOA install includes j2ee version 10.1.3.0.0 NOT 10.1.3.1.0.
Patch 5983191 is incompatible with this SOA install.
What next?
Is there a j2ee upgrade patch that I can install BEFORE installing 5983191? If so, it's not in the documentation... -
Network Adapter could not establish connection during installation
Hi,
I'm trying to install html db v10.2.0.1 and http server on the Fedora Core 4 platform and am getting a "Network Adapter could not establish connection during installation" error. This occurs after pressing Next at on the Specify HTML DB Database Details dialog box. Note that I'm not new to oracle databases or html db. I can't seem to find a similar thread on this forum related to the html db v2 install and I've read the FAQ related to the installation, making sure that I unset the TNS_ADMIN and ORACLE_HOME environment variables before launching the installer. I also checked that I can connect to the database via the listener, sqlplus sys@database as sysdba. I checked the listener status:
[oracle@hinault ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 18-AUG-2005 12:03:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 18-AUG-2005 08:11:25
Uptime 0 days 3 hr. 51 min. 58 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/product/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hinault.com)(PORT=1521)))
Services Summary...
Service "tibbetts" has 1 instance(s).
Instance "tibbetts", status READY, has 1 handler(s) for this service...
Service "tibbettsXDB" has 1 instance(s).
Instance "tibbetts", status READY, has 1 handler(s) for this service...
Service "tibbetts_XPT" has 1 instance(s).
Instance "tibbetts", status READY, has 1 handler(s) for this service...
The command completed successfully
I also checked the installation log files. Here's the contents of the end of the file:
schemaName = sys
schemaPassword = Protected value, not to be logged
connectString = //hinault.com:1521/tibbetts
userName = FLOWS_010600
INFO: Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: The Network Adapter could not establish the connection
SEVERE: The installer has encountered the following error while trying to connect to the target database:
ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: The Network Adapter could not establish the connection
INFO: User Selected: Yes/OK
I also checked the listener log and it looks normal. I checked that I entered the correct values in the Specify HTML DB Database Details dialog box, hostname, port and service name.[root@hinault sbin]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:12:3F:DF:23:BF
inet addr:10.100.41.136 Bcast:10.100.41.255 Mask:255.255.255.0
inet6 addr: fe80::212:3fff:fedf:23bf/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:72238 errors:0 dropped:0 overruns:0 frame:0
TX packets:44289 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19151698 (18.2 MiB) TX bytes:4351417 (4.1 MiB)
Interrupt:9
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6838 errors:0 dropped:0 overruns:0 frame:0
TX packets:6838 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3168107 (3.0 MiB) TX bytes:3168107 (3.0 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) -
Start-msg: could not get server configuration in ldap
Hello,
I am trying to get iPlanet Messaging Server 5.2 Patch 1 running, but when I run start-msg
I get the following error message:
General Warning: could not get server configuration in ldap, using cached configuration information
Note: I created this system using a ufsdump and ufsrestore combination on the instance directory.
Other file systems were not copied over.
My guess is that something else may be missing?
I ran ns-slapd first before starting the messaging server.
Thanks in advance.
TimThanks for the response. I have some followup
questions:
> I have done this with Messaging Server.
Several
things to do:
1. Go into Console, and change it there. Youneed
to change hostname and ip for admin server,Directory
server, and messaging server.
When I bring up the console, it asks for a user nameThe default user's name is "admin". The password was assigned during installation. You can also use, "cn=Mirectory Manager", but again, the password was assigned on install.
>
and password. Well, the admin quit and left no
documentation, so I don't have any idea on what to
use. Any ideas?
>
2. Edit your mappings file, to reflect the new ip
address.
Where is this mappings file?<install directory>/msg-<name of your server>/imta/config
>
> 3. Change the setting for "mailhost" for every
user
to reflect the new hostname. If you don't dothis,
nobody will get any mail.>
I interpret this to mean:
(1) use db2ldif and then use and editor to do a
global
search and replace on the mail hostname.yes
>
> It may turn out to be easier to "migrate" your
data,
rather than "fix" by changing hostname/ip.
to migrate:
install new application on new box, with correct
hostname/ip
Unfortunately, I tried this and did not have much
success. I gave up and went with
ufsdump/ufsrestore.That's very much the hard way. . .
>
> Use MoveUser to migrate users and mailboxes from
old
to new, or
Use imsbackup/imsrestore to move the mailboxes.
Export the data from ldap in ldif format, then usea
a text editor to change the mailhost value for all
the users, and then import that new data to thenew
directory server
I think I will have to do this anyways, right.
Assuming my new box is offline for a while and
users are still using the old box.You can certainly use imsbackup/imsrestore to move all new mails. . . -
Security Agent: Could not get the user record from OpenDirectory
Hi,
Two months ago I had to change my SSD due to a damage at the old one. In the Apple shop they installed OS X Lion with a image from their image-server.
After that the Mac was quite slow in booting. With the old SSD (128 GB) booting takes 25 sec now it takes 75 sec.
I tried different things to solve the problem without result. First I asked in the shop, then I googled the problem all with no real solution.
Today now I searched in the log files. I found the following:
09.02.12 11:03:07.861 SecurityAgent: Could not get the user record from OpenDirectory.
09.02.12 11:03:07.861 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
09.02.12 11:03:34.907 SecurityAgent: Could not get the user record from OpenDirectory.
09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
09.02.12 11:03:38.653 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
09.02.12 11:03:58.245 SecurityAgent: User info context values set for andi
09.02.12 11:03:58.246 SecurityAgent: User info context values set for andi
09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
This operation takes 30 secs during the boot process. Can somebody help me, to solve this problem?
Regards
Andreas
MacBook Pro, Mid 2009
2.66 GHz Intel Core 2 Duo
8GB 1067 MHz DDR3
SAMSUNG SSD 830 Series , 256 GB
OS X 10.7.3cece2bali wrote: "it seems that your mac tries to connect to a server while booting. This action will erase all your network configuration..."
Where can I go to learn more about this 'erasure' of network configuration if the mac tries to connect to a server while booting?
I get the same error message as the OP. My account is an Admin on the machine. It's configured to automatically log in on boot -- except sometimes it fails. It has a login-item which runs a bash script that makes an https request to a nearby machine. Maybe I should make this script sleep a while so the https action happens after the boot sequence is done? (unlike SmashHuevo, my user needs to be an Admin) -
Excise Part-2 is not getting updated during the MIGO
Dear Experts,
When I am doing GR (MIGO), I am selecting the Excise posting transaction in "Excise" header tab as "Capture & Post Excise Invoice".
But, here after posting the GR, only Part-1 is getting updated. Part-2 is not updating. Moreover, if I try to post the same vendor excise invoice in J1IEX, it is giving the error as " Part-1 not yet posted even though Part-1 is updated. Can any body suggest what is the root cause for the same?
One more thing is, once I select "Only Capture Excise Invoice" during GR, in the normal process Part-1 is updating and I'll be able to post the Part-2 in J1IEX. There is no issue. But, I can't be able to post the Part-2 during GR.
Note: I am receiving the goods against with the STO. And, we are paying the customs against with the STO. After paying the Customs Invoice, we are receiving the goods into our manufacturing Plant from logical plant.
Thanks in advance for your action!!!!
Regards,
Satya
DearHi Ashok,
I went through the above note. It explains the causes that why the posting is not happening in J1IEX.
And, as per the solution that is in that note, if we change the status of that excise invoice from 'P' to Blank in the table J_1IEXCHDR, then Vendor excise invoice will be cancelling.
So, I guess this can't resolve my issue. Because, my issue is if I select "Only Capture Excise", the Part-1 is updating in MIGO and I am able to post the Part-2 in J1IEX. But, If I select "Capture & Post Ecxise Invoice" in MIGO, then only Part-1 is updating and even I am not able to post the Part-2 in J1IEX also as the status of the Excise Invoice is "Posted".
And, this is happening frequently during MIGO while selecting "Capture & Post Excise". So, I guess the Function Module / BADI which updates the J_1IPART2 is not getting triggered during MIGO. Once it triggers in MIGO, then Part-2 will be posting in GR itself.
Could you please let me know the standard FM / BADI which updates the Excise Invoice Part-2 (J_1IPART2). So that I'll check with my ABAPer whether it is triggering or not during the MIGO.
Thanks,
Satya -
Hi I am facing an issue with Outlook web access on my production server Exchange Server 2007 with Sp1. When i try to reply or forward a message from OWA it displays The message has been deleted due to a virus threat . Kindly refer to the below error details. I have a box with all 3 roles installed I do not have an Edge Server . IO have installed Forefront on the same Box as my exchange Server.Below is the Detail of the error . Kindly Help
A virus was found in this message and it has been deleted. For further
information, please contact technical support for your organization.
Click here to continue working.
Copy error details to clipboard
Show details
Request
Url: https://192.168.7.12:443/owa/forms/basic/BasicEditMessage.aspx?ae=Item&t=IPM.Note&a=Reply&id=RgAAAACFMIZq8d7LTqcPs%2bRZA5g%2bBwBDDZWeCojSQZ1bZZ7Ga%2fkWAAAAeCc6AABDDZWeCojSQZ1bZZ7Ga%2fkWAA5iTbjpAAAJ
User host address: 192.168.7.11
User: Munendra Pal Gangwar
EX Address: /o=First Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=mp_gangwar
SMTP Address: [email protected]
OWA version: 8.1.336.0
Mailbox server: PFCDELEXCH01.PFCDOMAIN
Exception
Exception type: Microsoft.Exchange.Data.Storage.VirusMessageDeletedException
Exception message: Could not get properties.
Call stack
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(PropertyDefinition[]
properties, Boolean forceReload)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties, Boolean canSaveOrDisposeMapiProp)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties)
Microsoft.Exchange.Data.Storage.Item.InternalBindItem(StoreSession
session, StoreObjectId itemId, Byte[] changeKey, ItemBindOption
itemBindOption, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, ItemBindOption itemBindOption,
PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](StoreSession
storeSession, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.LoadMessage()
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Inner Exception
Exception type: Microsoft.Mapi.MapiExceptionVirusMessageDeleted
Exception message: MapiExceptionVirusMessageDeleted: Unable to get
properties on object. (hr=0x80004005, ec=1294) Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=479] Lid: 27161 EcDoRpcExt2
returned [ec=0x0][length=422][latency=15] Lid: 23226 --- ROP Parse
Start --- Lid: 27962 ROP: ropOpenMessage [3] Lid: 17082 ROP Error:
0x50E Lid: 26977 Lid: 21921 StoreEc: 0x50E Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
1238 Remote Context Overflow Lid: 14164 StoreEc: 0xFFFFFA1D PropTag:
0x672D0003 Lid: 8660 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid:
21970 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid: 23921 StoreEc:
0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x672F0014 Lid: 23921
StoreEc: 0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x6708000B Lid:
21970 StoreEc: 0x8004010F PropTag: 0xE960102 Lid: 21970 StoreEc:
0x8004010F PropTag: 0x6708000B Lid: 21970 StoreEc: 0x8004010F PropTag:
0xE960102 Lid: 21970 StoreEc: 0x8004010F PropTag: 0x67760102 Lid:
25394 Lid: 19506 Lid: 27698 Lid: 11285 StoreEc: 0x50E Lid: 21970
StoreEc: 0xFFFFFC07 PropTag: 0x30080040 Lid: 25818 Lid: 6153 StoreEc:
0x50E Lid: 25906 Lid: 5249 StoreEc: 0x50E Lid: 1750 ---- Remote
Context End ---- Lid: 27962 ROP: ropGetPropsSpecific [7] Lid: 17082
ROP Error: 0x4B9 Lid: 26465 Lid: 21921 StoreEc: 0x4B9 Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
26426 ROP: ropGetPropsSpecific [7] Lid: 1750 ---- Remote Context End
---- Lid: 26849 Lid: 21817 ROP Failure: 0x4B9 Lid: 20385 Lid: 28577
StoreEc: 0x50E Lid: 32001 Lid: 29953 StoreEc: 0x50E
Call stack
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
hresult, Object objLastErrorInfo)
Microsoft.Mapi.MapiProp.GetProps(PropTag[] propTagsRequested)
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
of almost every corporate confidentiality clause I have ever seen!! go figure......
Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
Brent
I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
Thanks for yours help. -
An error occured while creating the new dataset Could not get type informat
Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar -
Could not get schema Object:java.sql.SQLSyntaxErrorException ora-904
All of a sudden I get
Could not get schema Object:java.sql.SQLSyntaxErrorException: ORA-00904: "SYS"."O"."NAME": ongeldige ID
when doing anything in the tables tree in the connections pane
The only thing I set recently is pga_aggregate_target
Environment
Oracle 11.2.0.1
OS Windows Vista Ultimate sp2
Sql developer 2.1.1.64.39 with its own JDK
As the download links on OTN are broken I can not upgrade, and I'd rather not work in command line sqlplus.
Help!!!
Sybrand Bakker
Senior Oracle DBAMy copy of sqldeveloper isn't located in that directory. Would that matter?
In the mean time I have disabled filtering the tables node. Opening the tables node doesn't result in exceptions anymore.
Now, when I click on any table in that node I get 4 identical ora-904 error messages for sys.o.name for any table.
Apparently it is querying either the all_objects view and it thinks it is querying sys.obj$.
I didn't yet enable sql_trace for the session, I'm more or less giving up on sqldeveloper. I can not use the space bar in any datagrid, sqldeveloper has always been extreemly unresponsive when navigating the schema browser (as opposed to Toad), etc, etc. Too bad I bought Sue Harpers book, but I think I will be de-installing sqldeveloper soon.
Sybrand Bakker
Senior Oracle DBA
Maybe you are looking for
-
I need to create a Classic BADI definition in an ECC 6.0 Environment
Greetings all, Let me start by saying that I work in a corporation with many SAP landscapes at various versions (4.7, ecc 6 etc.) We have an application developed in an ECC 6.0 environment which needs to be pushed down to some 4.7 environments. Thi
-
How to include hidden/protected transaction ID in email?
I'm working on an application that includes a requirement for an email based send and response mechanism. Ideally I'd like to include somewhere within this email a transaction code that allows me to identify the target user response. What's the best
-
Just need to load Positions for legacy MM deposits
Just need some guidance for initializing only positions in SAP-TR. Only initializing the balance position, none of the previous interests will be brought over. Thanks, Rahul
-
The Case of the Deadly iTunes App...
It's 3AM, Friday, and my Mac Mini keeps locking up on EVERY run attempt to iTunes. Caused by: Purchasing $12.00 of videos (@$1.99/each) and a music title (@$0.99). * Purchased within 5 minutes of time. * Also downloading multiple Podcasts. Situation:
-
Firefox has no JNLP association how do I make one?
I have downloaded a JNLP file from http://phet.colorado.edu/en/simulations/category/physics for a physics class that I'm taking, but the file will not load or start in Firefox. Java Web Start has already been installed by the system administrator but