Error when raise crs on one node

rac with three-node，linux redhat as 5+10.2.0.4
on rac01：
[root@rac01 bin]# *./crsctl stop crs*
Stopping resources. This could take several minutes.
Error while stopping resources. Possible cause: CRSD is down.
[root@rac01 bin]# *./crsctl check css*
Failure 1 contacting CSS daemon
[root@rac01 bin]# *./crsctl check crs*
Failure 1 contacting CSS daemon
Cannot communicate with CRS
Cannot communicate with EVM
[root@rac01 bin]# *./crsctl start crs*
Attempting to start CRS stack
The CRS stack will be started shortly
[root@rac01 bin]# *./crs_stat -t*
Message not found
[root@rac01 bin]# ps -ef | grep oracle | grep "\.bin" | grep -v grep
oracle 3815 3814 1 23:26 ? 00:00:05 /home/oracle/product/10.2.0/crs/bin/evmd.bin
oracle 5160 5132 1 23:28 ? 00:00:02 /home/oracle/product/10.2.0/crs/bin/oclsomon.bin
root 6991 6569 0 22:29 ? 00:00:00 /home/oracle/product/10.2.0/crs/bin/oprocd.bin run -t 1000 -m 500 -f
oracle 7169 6600 0 22:29 ? 00:00:27 /home/oracle/product/10.2.0/crs/bin/ocssd.bin
root 30004 29673 1 23:14 ? 00:00:18 /home/oracle/product/10.2.0/crs/bin/crsd.bin restart
log outputs：
[root@rac01 cssd]# tail -100f ocssd.log
[    CSSD]2011-06-14 00:03:44.686 [1209174336] >TRACE: Authentication OSD error, op: scls_auth_response_prepare
loc: validate4
info: directory for /home/oracle/product/10.2.0/crs/css/auth/A2513039 does not exist
dep: 2
[    CSSD]2011-06-14 00:03:45.001 [1209174336] >TRACE: Authentication OSD error, op: scls_auth_response_prepare
loc: validate4
info: directory for /home/oracle/product/10.2.0/crs/css/auth/A4520272 does not exist
dep: 2
[    CSSD]2011-06-14 00:03:45.011 [1209174336] >TRACE: Authentication OSD error, op: scls_auth_response_prepare
loc: validate4
info: directory for /home/oracle/product/10.2.0/crs/css/auth/A1135239 does not exist
dep: 2
[    CSSD]2011-06-14 00:03:46.001 [1209174336] >TRACE: Authentication OSD error, op: scls_auth_response_prepare
loc: validate4
info: directory for /home/oracle/product/10.2.0/crs/css/auth/A3144859 does not exist
[oracle@rac01 crsd]$ tail -100f crsd.log
2011-06-14 00:04:01.284: [ COMMCRS][2606041840]clsc_auth_send: (0x12abec80) Connection not active
2011-06-14 00:04:01.284: [ COMMCRS][2606041840]Authorization failed, network error
2011-06-14 00:04:01.284: [ CSSCLNT][2606041840]clsssInitNative: connect failed, rc 2
2011-06-14 00:04:01.286: [ CRSRTI][2606041840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
[ OCRUTL][2606041840]u_set_comp_error: Parameter was NULL
[ OCRUTL][2606041840]u_set_ocr_error: Parameter was NULL
2011-06-14 00:04:02.681: [ COMMCRS][2606041840]Authorization failed, network error
2011-06-14 00:04:02.681: [ CSSCLNT][2606041840]clsssInitNative: connect failed, rc 2
[oracle@rac01 evmd]$ tail -10f evmd.log
2011-06-13 23:45:29.059: [ CSSCLNT][319068720]clsssInitNative: connect failed, rc 2
2011-06-13 23:45:29.059: [    EVMD][319068720]0EVMD waiting for CSS to be ready err = 3
[ OCRUTL][319068720]u_set_comp_error: Parameter was NULL
[ OCRUTL][319068720]u_set_ocr_error: Parameter was NULL
2011-06-13 23:45:30.345: [ COMMCRS][319068720]Authorization failed, network error
2011-06-13 23:45:30.345: [ CSSCLNT][319068720]clsssInitNative: connect failed, rc 2
2011-06-13 23:45:30.346: [    EVMD][319068720]0EVMD waiting for CSS to be ready err = 3
[ OCRUTL][319068720]u_set_comp_error: Parameter was NULL
[ OCRUTL][319068720]u_set_ocr_error: Parameter was NULL
processes on rac02：
[oracle@rac02 ~]$ ps -ef | grep oracle | grep "\.bin" | grep -v grep
oracle 6334 6330 0 16:53 ? 00:00:02 /home/oracle/product/10.2.0/crs/bin/evmd.bin
root 6464 5524 0 16:53 ? 00:00:27 /home/oracle/product/10.2.0/crs/bin/crsd.bin reboot
root 6898 6475 0 16:53 ? 00:00:00 /home/oracle/product/10.2.0/crs/bin/oprocd.bin run -t 1000 -m 500 -f
oracle 7007 6954 0 16:53 ? 00:00:00 /home/oracle/product/10.2.0/crs/bin/oclsomon.bin
oracle 7069 6509 0 16:53 ? 00:00:17 /home/oracle/product/10.2.0/crs/bin/ocssd.bin
oracle    7218 6334 0 16:54 ?        00:00:00 /home/oracle/product/10.2.0/crs/bin/evmlogger.bin -o /home/oracle/product/10.2.0/crs/evm/log/evmlogger.info -l /home/oracle/product/10.2.0/crs/evm/log/evmlogger.log
why node rac01's crs service not raise ?

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Grid Computing » Real Application Clusters which you can get more quick response
Regard
Helios

Similar Messages

LabVIEW PDA reports COREDLL.DLL error when using Call Library Function Node

I'm trying to build a LV PDA app that calls an external DLL file built using embedded visual C. When configuring the Call Library Function node I select the stub DLL, configure the I/O parameters and select OK. When the configuration dialog closes I get the following error:
LabVIEW: LabVIEW.exe - Unable to Locate Component
This application has failed to start because COREDLL.DLL was not found. Re-installing the application may fix this problem.
I do not get this error when using the configuration dialog in the example VIs.
Any suggestions as to the cause and/or the solution?
Thanks,
Ryan

Hello -
When you create a PDA VI that calls a DLL, you must include the .c or .lib file that corresponds to the DLL. Take a look at these documents:
LabVIEW PDA Module Build Errors with VIs that Call DLLs
Why Do I Receive Errors When Calling a C++ DLL from a Call Library Node Using the LabVIEW PDA Module...
How To Call External Code in LabVIEW PDA for Palm OS
H
ow To Call External Code in LabVIEW PDA for Pocket PC
Hope this helps!
S Vences
Applications Engineer
National Instruments

Rendering Error when using more than one DataSheetView on a Enterprise Wiki-Page

Hi Experts,
how to reproduce:
Add two Custom Lists with some Fields (Add Lookup-Columns to both Lists).
Add a DataSheetView to each List and mark it as Default-View
Create a Enterprise Wiki-Page
Add a WebPart (Custom-List-1)
You will see the Content from List 1 as DataSheet-View (because it is the Default-View)
Add another WebPart below the previous added WebPart (Custom-List-2)
You will see the Content from List 2 as DataSheet-View (because it is the Default-View)
Notice that the First DataSheet has faulty Rendering. The Lookup-Columns having more than one 'Arror-Down' Image and it is even on the left. If you click into different Column, different row you get the same.
I can reproduce this behaviour anytime.
Environment: SharePoint 2013 Enterprise, IE10
If you use Development-Tools to identify first datarow of first DataSheet you can see that it has to do something with the related <Input>-Tags:
<div class="combobox-placeholder" id="jsgrid_combobox" style="left: 27px; top: 32px; width: 117px; height: 29px; border-top-color: currentColor; border-right-color: currentColor; border-bottom-color: currentColor; border-left-color:
currentColor; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; border-top-style: none; border-right-style: none; border-bottom-style: none; border-left-style: none; visibility: inherit; ; direction: ltr; min-width:
117px; background-color: transparent;">
<input class="cb-textbox " style="width: 156px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown" class="combobox-img" style="height: 29px;"
dir="ltr" type="button" value="▼"/><input class="cb-textbox " style="width: 84px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown"
class="combobox-img" style="height: 29px;" dir="ltr" type="button" value="▼"/>
Please have a look into it. Current Workaround for me is to have a Default-ListView in first WebPart. But then Customer has to click the Edit-Button to Change the Item in the releated EditForm. This is a Show-Stopper here!
With Best Regards,
Ronny

Hi Ronny,
According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
I tested the same scenario per your post, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when exporting IDOC from one XI system to another

Hi all,
When I do an export for an IDOC from my one XI server to be able to import it into another I get the error below. The funny thing is that it works perfectly for my COND_A idoc but not at all for DEBMAS and MATMAS idoc.
Any ideas?
<b>Error during export. Internal error during pvc call: SAP DBTech JDBC: Result set is positioned after last row.</b>
Regards,
Liesel

Hey,
I guess you are using MAXDB,
please read note number 1055246
(Inconsistent XI content caused by bug in MAX DB)
Good luck!

Error when copying items from one table to another

I am trying to copy data from 2 archive tables within an
Access database to their twin production tables. The first table
copies perfectly with the code:
<CFQUERY NAME="moveArchAttach" datasource="faaco2">
INSERT INTO tbl_Attachment ( PostID, Attachment, AttachNote,
AttachName )
SELECT tbl_Attachment_Archived.PostID,
tbl_Attachment_Archived.Attachment,
tbl_Attachment_Archived.AttachNote,
tbl_Attachment_Archived.AttachName
FROM tbl_Attachment_Archived
</CFQUERY>
However, when trying to use similar code on the other table:
<CFQUERY NAME="moveArchPost" datasource="faaco2">
INSERT INTO tbl_Posting ( Title, FirstName, LastName,
PhoneNumber, RoutingSymbol, Email, IniDate, ComDate, SOLNBR,
PhaseCode, ProcCode, Posting, Password, RegionCode )
SELECT tbl_Posting_Archived.Title,
tbl_Posting_Archived.FirstName, tbl_Posting_Archived.LastName,
tbl_Posting_Archived.PhoneNumber,
tbl_Posting_Archived.RoutingSymbol, tbl_Posting.Email,
tbl_Posting.IniDate, tbl_Posting.ComDate, tbl_Posting.SOLNBR,
tbl_Posting.PhaseCode, tbl_Posting.ProcCode, tbl_Posting.Posting,
tbl_Posting.Password, tbl_Posting.RegionCode
FROM tbl_Posting_Archived
</CFQUERY>
I receive the error:
[Microsoft][ODBC Microsoft Access Driver] Too few parameters.
Expected 9.
Any help would be greatly appreciated, I am at a loss and
I've tried everything. Thank you.

I realized my error immediately after posting this topic and
subsequently have resolved this error. On 9 of the values, I have
listed the wrong table in the SELECT statement. This is why one
needs to take breaks instead of staring at a screen forever :).
Thank you anyway!

Error when starting SAP Business One Integration Server Service

Hi all,
I have a very urgent problem when installing B1iSN:
I'm installing B1iSN2007 for a customer (Windows server2008R2, SBO 8.8.1),
and at the beginning of the installation, after instaling the technology, I have an error,
The Tomcat server can't start.
I get the following error:
Windows could not start the SAP Business One Integartion service on Local Computer. For more Information, review the system
event Log.If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
In the event viewer I didn't find any more details.
In the tomcat logs (Under SAP Business One Integration\B1iServer\tomcat\logs) I find this:
[2012-01-05 15:12:26] [info] Procrun (2.0.4.0) started
[2012-01-05 15:12:26] [info] Service Tomcat5 name SAP Business One Integration Service
[2012-01-05 15:12:26] [info] Service Tomcat5 installed
[2012-01-05 15:12:26] [info] Procrun finished.
[2012-01-05 15:12:26] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:12:26] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:12:26] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:13:13] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:13:13] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:13:13] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:15:27] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:15:27] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:15:27] [1269 prunsrv.c] [error] ServiceStart returned 1
What is the problem? How can I fix it?
Thanks a lot
Chana

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Error when trying to copy one of my folders, or compress it in the finder

When I try to copy one of my folders, or compress it in the finder, a window pops up with this message: "The operation can't be completed because an unexpected error occurred (error coded -8060)". It does not say which file or folder is the problem. I don't see anything relevant in the Console either.
Please advise, I need to back up that folder. It is where I keep Xcode projects

I found some subdirectories within my Project folder that were complete duplicates of other directories. After deleting those, I no longer had the error. I don't know where they came from, but think they may have been created after an upgrade, say from Xcode 3.0 to 4.0 but don't remember. Anyway, don't know any more about it, only that it went away after I deleted those duplicate subfolders. Good luck !

Run Time Error when trying to select hierarchy node

Hy all,
the situation is the following:
i attempt to create a variable of type "hierarchy node" (for cost center cha) in my planning area, i used the replacement type "user defined value", check on "input allowed by user" and then i create the user entry, in selection condition i run match code and when i try to select a single cost center (not a hierarchy node) expanding the hierarchy tree the system goes dump with the following message:
Runtime Errors         MESSAGE_TYPE_X
Error analysis
Short text of error message:
Program is inconsistent -> see long text
Technical information about the message:
Diagnosis:
An inconsistent program status has occurred. The program cannot be continued.
System response:
The system crashes.
Procedure
         1. Look in OSS for a note under the error message UPC099.
         2. When you open a problem message, send the first pages of the
             system crash message including the section 'Source code excerpt
             ' with the message.
     Procedure for System Administration
    Message classe...... "UPC"
    Number.............. 099
Selecting a hierarchy node (not a single cost center but a text node grouping more cost conter) this problem does not occur.
I appreciate (and reward) any hints.
Thanks in advance
Fabio

Hi,
Go through the oss notes with error message UPC099
Dump during hierarchy selection:<b>536694</b>
Dump when reading a hierarchy with intervals :<b>423953</b>
Regards-
Siddhu
Message was edited by: sidhartha

Dtp error when loading data from one cube to another cube?

hi,experts
it seems strange that when I tick the some characteristics as navigational attributes in the cube , the error occurs during the execution of the DTP:error while updating to target Z* (Cube name ).
once i turn the flag off , no error appear. could anyone give me a clue ?
thanks in advance!

Hi,
When u make changes in the cube u need to make necessary changes in Transformation and activate the DTP.The checking of Navigational attributes in cube will appear in u r transformation as new fields where u need to create a mapping for them and then activate, also activate your DTP and then load the data. This should resolve your issue.
Regards

Error when executing VI with "Invoke Node" in loop

Hello,
please check if this is possible what i am doing here or if there is a better way to do it.
The goal is to have a VI that i can start in TestStand which is then running in a loop until i set a global variable.
I do this currently with:
1.) Starting the VI with "Invoke Node" (see screenshot 01)
2.) This Vi is then running all the time in a loop until the global for exiting is True (screenshot 02)
3.) Then i have another VO to set the Quit-variable to true
Normally this works as it should, but sometimes i get the error-message:
Invoke Node in NameOfTheViCalledInTestStand.vi
Method Name: Run VI
VI Path: NameOfTheViThatContainsTheInvokeNode.vi
LabVIEW: Das VI befindet sich in einem für diese Operation unzulässigen Zustand.
The question is: what does this error mean and what better ways are there to do what i want to.
Perhaps for better understanding, the VI which runs in a loop executes dll-functions to enable and disable an ample-tower to make a light blinking.
And because there is no function "blink", i have to make it on off on off on off....
So the vi loops and makes on off until i say "quit" then blinking stops.
Thanks for any ideas
Attachments:
01_InvokeNode.jpg ‏8 KB
02_ViRunsInLoop.jpg ‏23 KB

I cant´t do this "Try changing the "Run" node
to "Wait Until Done" = True." because then the TestStand-Step is
hanging until the loop is finished.
I only want to start the "blinking" and the continue normally in the sequence.
To
avoid that the vi with the "Invoke Node" is started twice a have a vi
above it whick checks with the globalVariable "IsCurrentlyBlinking" if
the start is allowed.
If IsCurrentlyBlinking= True then nothing happens.
So normally it can´t happen that it starts twice. Only if the GlobalVariables are not correct.
The
variable "IsCurrentlyBlinking"is set to TRUE in the subvi before the
loop starts and after the loop is finished its set to FALSE in the
subvi.
Attachments:
03_CheckStart.jpg ‏16 KB

Error when cloning db from one machine to another

Hi people.
I am trying to clone a database from one machine to another. (both are linux x86_64 machines with 11g installed on both)
I obtained the following error after a few minutes into the process. Any workarounds for this?
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10041: Could not re-create polling channel context following failure.
RMAN-10024: error setting up for rpc polling
RMAN-10005: error opening cursor
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-03002: failure of Duplicate Db command at 11/26/2013 23:05:42
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 9054
Session ID: 91 Serial number: 5

Likely the RDBMS Software version and/or Patchset level is not the same on the two servers.
Hemant K Chitale

Error when trying to create Single-node Server Pool

We have an existing Oracle VM environment at our company that I have taken over support of. I would like to add a new Oracle VM server to the Manager, but I want it to be in it's own separate Server Pool by itself (no HA).
When creating the Server Pool in Oracle VM Manager, I am able to enter the new server information, assign all the roles and test the connection properly. However, when I hit next, I receive this error:
OVM-1011 Oracle VM Server newServerName.domain.net:MyPassword operation Checking Shared Storage failed: failed:<TypeError: list indices must be integers> .
The Oracle VM server is version 2.2, and I accepted most of the defaults when installing (local OVS formatted as ocfs2).
The Oracle VM Manager is version 2.1.5.
Thanks in advance for any help.

I have a VM Manager 2.2 that is managing a VM Server 2.0 (10.10.10.11). I am adding a second VM Server 2.2 as a separate environment with its own storage pool for management. I couldn't.
Error
OVM-1011 OVM Manager communication with 10.10.10.12 for operation Pre-check cluster root for Server Pool failed: <Exception: Cluster root not found.>
What does this cluster root not found means? I just want to use the same VM Manager to manage another independent VM Server. Is this possible?

Error when copying code from one file to another

This bit of code works perfectly well in a test file with a single button:
var link:URLRequest=new URLRequest("http://www.mywebsite.ca");
buttonName.addEventListener(MouseEvent.CLICK, onClick);
function onClick(event:MouseEvent):void{
navigateToURL(link);
... but when I copy it into the file I'm working on, which has no other actionscripts or buttons, just a lot of animation I get this compiler error:
Description: '{' expected Source: function onClick()event:MouseEvent):void{
Description: Unexpected '}' encountered Source: {
Any ideas?

According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{

B85-G43 A2 boot error when connecting more then one SATA driver

Hello everyone please help me.
As the title says, whenever i connect more than one sata driver (hdd or dvd) i get te A2 boot freeze....
Already changed cables, hard drives, and problem persist!
Sorry for my bad english, not my main language.
Board: MSI b85-g43
Bios: c.40
VGA: amd 7970 black edition
PSU: xfx pro1000w
Intel Core i5-4670K
MEM: HyperX 1600 8gb
HDD: kingston 120gb ssd and two SATAS
OS: Windows 7 64bit Ultimate

Svet, thx for replying.
I'm a noob here and have some doubts about this steps...
1.) >>Use the MSI HQ Forum USB flasher<< (Ok got it.)
A.) Download the attached archive and place it on your desktop. Do not decompress. (Ok got it)
B.) Download and install the Forum flash tool. (MSI HQ Forum USB flasher?)
C.) Insert your FAT32 formatted usb stick. (Ok got it)
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled. (win 8 options??? i'm running on a win7 ultimate 64bit)
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive. (Ok got it.)
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash. (ok got it, change boot sequence to USB and follow the directions.)
Yeah i know a lot of doubts, sorry for that, Working all day and at night i have to go to the university.
Thank you for your time!!!

Session Failover not happening in SOA 11.1.1.5 Cluster when stop one Node

Hi,
We have a 2 Node SOA 11.1.1.5 Cluster. We are noticing one issue if when during a request processing if we bring down one Node the whole request fails and we loose the data. Other Node is not taking over the request to finish it. We have Hardware LoadBalancer that routes to one of OHS which internally routs to one of the SOA Servers. But when we shut down one Node right at that moment we are not able to access the service probably the request went to the server that is shutting down. This is the error we see
oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): But when we try it again once the Node is down it works fine.
Wondering if there's any setting we need to do to handle this type of scenario.
Thanks

I cut and paste the description of the note. There is a statement with the cause that states
"This issue happens only when the display name of a NIC configured for migration in nodemanager is null"
and it is a little ambigious. It implies there is a workaround of setting the display name, but doesn't discuss how to apply this workaround; the display name it refers to generated by a code call to the NetworkInterface.getDisplayName() method from the JDK.
I assume that the display name here is the parameter called Interface within the nodemanger.properties, but there is nothing within the note that confirms this, nor if setting this to the NICE name will fix this issue. here is a full list of the nodemanger.propertes file -> http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/java_nodemgr.html#wp1068415
I'd download and try the patch in your place; it's a WLS patch (as nodemanager is part of WLS) so shouldn't affect SOA Suite. Failing that, open a SR.

Error when raise crs on one node

Similar Messages

Maybe you are looking for