Error when running root.sh after 11.g2 standalone rac installation

OS: redhat 5.8
After completing the installation, when running root.sh , I get error:
[root@vmorarac1 oracle]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/oracle
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Unrecognized character \x03 in column 3 at /u01/app/11.2/oracle/perl/lib/5.10.0/File/Basename.pm line 1.
Compilation failed in require at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.
BEGIN failed--compilation aborted at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.

Based on error messages you are getting it narrows down to perl issue and invalid character present in perl script.
Have you or someone modified the perl script? Usually it is required to modify the scripts to point toproper perl location. Sometimes when you modify the script, the text editors could insert some characters in wrong encoding, etc. So I suggest to do comparison to perl scripts from the nodes with the same psu levels where installation was sucessfull., just compare filesize and if its different, then you could possible copy right scripts over current ones.
The GI installations are very hard to investigate remotely, there could be too many things that can be wrong, so oracle support is your friend.
As general thing I always recommend to install latest PSU before root.sh script execution.
Ed Rudans
erudans.blogspot.com

Similar Messages

10g R2 RAC on Solaris 10 error when running root.sh

hi, I am installing Oracle 10g rac on Solaris 10 with two nodes. In the end of the installation of RAC when a run root.sh I get the error bellow.
# /opt/crs/oracle/product/10.2.0/crs/root.sh
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Failed to upgrade Oracle Cluster Registry configuration

I have done this install using a pair of T2000's and a 65XX SAN. The install doco is not straight forward. I had to compile a number of Metalink notes to eventually get the disk partitions sorted. Of particular help was Note:271621.1.
Since I am not a Solaris admin, the next bit is caveated as "This is how I did it" and maybe not how anyone else would have done it. These things were not explicitly noted, but gleaned through a bit of reading:
1) you need to throw away the first cylinder of each LUN. I did this by creating the first partition as a single cylinder.
2)then create s4 (or whichever slice you desire) as the rest of the space allocated to that LUN.
3) Repeat this for each LUN presented
4) I created a directory /san under which I then created the character mode (raw) interface for each of ocr, vote.
5) For asm, and for no other reason than being self documenting, I created /san/asm and created character mode interfaces to each of the LUN's for datadg and fradg
6) repeat steps 1-5 on the other box
I took quite some time (2 days) to extract all this and assemble it to a working system. But has always been stable.
Regards,
Kevin Crowley
Principal Consultant
Pacific DBMS P/L

Verification error when run the game after download the jad/jar by OTA on BB 8300

On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
I check the article "Support - MIDlet has verification error at offset", and have no harvest.
BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
How to fix the bug?
Thanks for your help.

Hello,
I gather for your lack of details that you are wanting to get an application that you have written working on the device?
Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
Lacking this however, the software needs to be fixed.
You'll have better luck looking on the Java forums, not here...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Error when running root.sh on node1...

Oracle10GR2 RAC
RHEL 4 64bit
Hi,
I am almost through the clusterware installation. However, I am at the part where I have to run the root.sh scripts. When I run in on my first node I get the following message:
[root@galapagos home]# ./root.sh
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
/crs/home/bin/crsctl.bin: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No s uch file or directory
Failure initializing entries in /etc/oracle/scls_scr/galapagos.
Do I need to worry about this? I'm pretty sure it is suppose to be error free.
Any help would be appreciated.
Thanks.

Apparently, you are missing a c++ library. Please check to see if you have a library by name some thing like 'compat-libstdc++-*'
$rpm -qa |grep c++
libstdc++-devel-32bit-9-200407011229
libstdc++-3.3.3-43.41
compat-libstdc++-lsb-4.0.2_20050901-0.4 #-----This may be missing
libstdc++-devel-3.3.3-43.41
gcc-c++-3.3.3-43.41
HTH
Thanks
Chandra Pabba
PS: After posting this message, I have seen you second post...please ignore..
Message was edited by:
ChandraP

Invalid DataStore object name error when running process chain after EHP1

Hello,
We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
Many Thanks,
Al

Hi,
Please implement OSS 1345331.
If this does not help try the below steps:
1. Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a
       particular PSA table for finding the inconsistencies.
2.   After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
3. 'SAP_PSA_PARTNO_CORRECT' in repair mode for the
      PSA tables. Run the report again after this
4. 'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to
     double check that the invalid partitions are
     corrected.
     Once this is done you can execute the report
     'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
-Vikram

Error when running root.sh

I got the following message when I ran root.sh, at the end of installing 9ias on linux 6.2.
' Please delete any log and trace files previously created by the oracle enterprise manager intelligent agent. These files may be found in the directory used for storing other net8 log and trace files. If such files exist the OEMIA might not restart '
Does any one have any idea of the locatinof the log and trace files, mentioned in this message, or why I got this message
pam

Apparently, you are missing a c++ library. Please check to see if you have a library by name some thing like 'compat-libstdc++-*'
$rpm -qa |grep c++
libstdc++-devel-32bit-9-200407011229
libstdc++-3.3.3-43.41
compat-libstdc++-lsb-4.0.2_20050901-0.4 #-----This may be missing
libstdc++-devel-3.3.3-43.41
gcc-c++-3.3.3-43.41
HTH
Thanks
Chandra Pabba
PS: After posting this message, I have seen you second post...please ignore..
Message was edited by:
ChandraP

Error when running ./netca after clone of oracle home

Hello,
Databas version : 11.1.0.7
OS version : RHEL 5.5
To clone oracle_home on the target system, followed the below steps.
1. Not ran adpreclone.pl on the source as i am doing only database oracle_home clone.
2. Sutdown database and listner of the source db, ziped oracle_home, moved it to target server.
3. Unzip the folder and ran the script clone.pl in the target system, clonning is successfull.
Now i need to configure connection using ./netca (not created database using dbca yet) getting below erros.
[orarman@devtest bin]$ ./netca
****DISPLAY environment variable not set!
Oracle Net Configuration Assistant is a GUI tool
which requires that DISPLAY specify a location
where GUI tools can display.
Set and export DISPLAY, then re-run.
So i have set display as
[orarman@devtest bin]$ export DISPLAY=192.168.1.6:0.0
If i run ./netca getting an below error
[orarman@devtest bin]$ xhost +
xhost: unable to open display "192.168.1.6:0.0"
and
xclock
Error: Can't open display: 192.168.1.6:0.0
[orarman@devtest bin]$ ./netca
Oracle Net Services Configuration:
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Please suggest..
Thanks ..
Edited by: 955685 on Sep 16, 2012 11:55 PM

Are you using putty to connect to the server or you are directly login into the server

LOG_FILE_NOT_FOUND when running cleaner manually after some data purge

I hit LOG_FILE_NOT_FOUND error when running cleaner manually after some data purge, I searched the forum, found someone also faced the same issue before, but cannot find any clue on how to fix it. Below is the error trace and followed by our configurations
Caused by: com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)
Environment must be closed, caused by:
com.sleepycat.je.EnvironmentFailureException: Environment invalid because of
previous exception: (JE 4.1.6) /scratch/tie/thirdeye/index/data-store
fetchTarget of 0x50f/0x3fb9dd6 parent IN=368491717 IN
class=com.sleepycat.je.tree.IN lastFullVersion=0x510/0x2ca7d18
parent.getDirty()=false state=0 LOG_FILE_NOT_FOUND: Log file missing, log is
likely invalid. Environment is invalid and must be closed.
at
com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureExcept
ion.java:196)
at
com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1439)
at com.sleepycat.je.Environment.checkEnv(Environment.java:2117)
at com.sleepycat.je.Environment.checkpoint(Environment.java:1440)
at
com.oracle.thirdeye.datastore.DataStoreManager.clean(DataStoreManager.java:402
at
com.oracle.thirdeye.infostore.InfoStoreManager.clean(InfoStoreManager.java:301
... 11 more
Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid
because of previous exception: (JE 4.1.10)
/scratch/tie/thirdeye/index/data-store fetchTarget of 0x50f/0x3fb9dd6 parent
IN=368491717 IN class=com.sleepycat.je.tree.IN
lastFullVersion=0x510/0x2ca7d18 parent.getDirty()=false state=0
LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is
invalid and must be closed.
at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1332)
at com.sleepycat.je.tree.IN.findParent(IN.java:2886)
at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:881)
at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:809)
at
com.sleepycat.je.cleaner.FileProcessor.findINInTree(FileProcessor.java:1152)
at com.sleepycat.je.cleaner.FileProcessor.processIN(FileProcessor.java:1090)
at
com.sleepycat.je.cleaner.FileProcessor.processFile(FileProcessor.java:538)
at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:241)
at com.sleepycat.je.cleaner.Cleaner.doClean(Cleaner.java:463)
------------Configurations-------------------------
EnvironmentConfig.ENV_RUN_CLEANER -> false
EnvironmentConfig.CHECKPOINTER_HIGH_PRIORITY -> true
EnvironmentConfig.CLEANER_EXPUNGE -> false
Any hints are appreciated. I'm also working for Oracle CDC, feel free to call me at 861065151679 or drop me an email at [email protected] so that we can talk more in detail
Anfernee

Anfernee, I will contact you via email.
--mark

11gR2 RAC install fail when running root.sh script on second node

I get the errors:
ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
[main] [ 2012-04-10 16:44:12.564 EDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
I have tried the fix solutions from metalink note, but did not fix issue
11GR2 GRID INFRASTRUCTURE INSTALLATION FAILS WHEN RUNNING ROOT.SH ON NODE 2 OF RAC USING ASMLIB [ID 1059847.1

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.

I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
The box displayed:
Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
What do I need to do to bring the correct library into the transportable code?

Hello,
I was unable to reproduce the behavior that you saw. I was able to deploy my application with the Linear Fit PtByPt without issues.
Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
Justin Parker
National Instruments
Product Support Engineer

Error when run Depreciation Posting Run AFAB

Hi,
I found error when run Depreciation Posting Run for period 7 2007.
FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below.
Error Message:
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting depreciation, a document has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
Can any one help how to solve this issue?

Hi Paul,
Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
No Year From No          To No           Current No          Ext
03 2001   0300000000   0399999999   -                          /
03 2002   0300000000   0399999999   -                          /
03 2003   0300000000   0399999999   -                          /
03 2004   0300000000   0399999999   -                          /
03 2005   0300000000   0399999999   -                          /
03 2006   0300000000   0399999999   -                          /
03 2007   0300000000   0399999999   -                          /
03 2008   0300000000   0399999999   -                          /
03 2009   0300000000   0399999999   -                          /
Referring back to Asset Accounting, the Reference Document: 19.
Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
Can you guide me more details on it?
Thanks in advance.
Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

ADT packaging with native extensions : permission denied error when running remote build.

Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
     [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
     [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
     [java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     [java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
     [java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
     [java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     [java] at java.lang.System.loadLibrary(System.java:1045)
     [java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     [java] at java.security.AccessController.doPrivileged(Native Method)
     [java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
     [java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
     [java] at java.awt.Dimension.<clinit>(Dimension.java:70)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
     [java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
     [java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
     [java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
     [java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
     [java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
     [java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
     [java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
     [java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
     [java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
     [java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
     [java] at com.adobe.air.ADT.run(ADT.java:414)
     [java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.

Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

Error when run taglib!

Now I have a error when run taglig!
run taglib with apache tomcat 5.5 by JDK 1.5 when i run have error is:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: javax.servlet.jsp.tagext.TagInfo.<init>(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljavax/servlet/jsp/tagext/TagLibraryInfo;Ljavax/servlet/jsp/tagext/TagExtraInfo;[Ljavax/servlet/jsp/tagext/TagAttributeInfo;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;[Ljavax/servlet/jsp/tagext/TagVariableInfo;Z)V
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:272)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
root cause
java.lang.NoSuchMethodError: javax.servlet.jsp.tagext.TagInfo.<init>(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljavax/servlet/jsp/tagext/TagLibraryInfo;Ljavax/servlet/jsp/tagext/TagExtraInfo;[Ljavax/servlet/jsp/tagext/TagAttributeInfo;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;[Ljavax/servlet/jsp/tagext/TagVariableInfo;Z)V
     org.apache.jasper.compiler.TagLibraryInfoImpl.createTagInfo(TagLibraryInfoImpl.java:435)
     org.apache.jasper.compiler.TagLibraryInfoImpl.parseTLD(TagLibraryInfoImpl.java:248)
     org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:162)
     org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:423)
     org.apache.jasper.compiler.Parser.parseDirective(Parser.java:492)
     org.apache.jasper.compiler.Parser.parseElements(Parser.java:1552)
     org.apache.jasper.compiler.Parser.parse(Parser.java:126)
     org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
     org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:563)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.12 logs.
now what do I do?
please, tell me!
thanks!

Tomcat 5.5 is using Servlet 2.4 & JSP 2.0.
Have you compiled the taglib using the correct version of servlet.jar ?

SAML v2 plugin: Error when running saml2setup

I try to install the SAML v2 plugin and get the following error when running the saml2setup command:
C:\SSO\samlv2-2007Q2-windows>saml2setup install -s saml2silent
Java home path = C:\PROGRA~1\Java\JDK15~1.0_1
Configuring SAML2 plugin ...
java.lang.Exception: errorCopyFiles
        at com.sun.identity.saml2.install.SAML2Util.copyFile(SAML2Util.java:195)
        at com.sun.identity.saml2.install.SAML2Util.backupFiles(SAML2Util.java:5
17)
        at com.sun.identity.saml2.install.SAML2Util.configureSAML2(SAML2Util.jav
a:342)
        at com.sun.identity.saml2.install.SAML2Setup.configure(SAML2Setup.java:2
06)
        at com.sun.identity.saml2.install.SAML2Setup.execute(SAML2Setup.java:123
        at com.sun.identity.saml2.install.SAML2Setup.main(SAML2Setup.java:71)I have installed the Java ES 5 Identity suite with default configuration on Windows 2003. The content of the amserver.war lies extracted in the staging directory. The saml2silent properties file looks like this:
STAGING_DIR=C:/SSO/fm/war_staging
ADMINPASSWD=XXXX
DEPLOY_SAMPLES=true
SYSTEM=
AM_INSTANCE=
AM_CONFIGURATION_DIR=C:/PROGRA~1/Sun/JavaES5/identity/config
AMADMIN_DIR=C:/PROGRA~1/Sun/JavaES5/identity/bin
LOAD_SCHEMA=true
DS_DIRMGRDN="cn=Directory Manager"
DS_DIRMGRPASSWD=XXXXDoes anybody have an idea what's wrong?

Unfortunately not. I figured out that the problem was caused by some missing libraries. The amserver.war of the package installation is not identical to the amserver.war archive of the the single war deployment, since the package deployment uses a shared folder for some of the libraries. After copying the libraries into the staging folder I ran into other issues. Therefore I decided to install Access Manager using the single war depolyment. I could then install the SAML v2 plugin without any problems.

Error when running

Folks, I get this error when running the following command, anyone know whats going on?
root@its12 # directoryserver -u 5.2 configure
Exception in thread "Thread-2" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:68)
at sun.awt.motif.MToolkit.<clinit>(MToolkit.java:93)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at java.awt.KeyboardFocusManager.initPeer(KeyboardFocusManager.java:398)
at java.awt.KeyboardFocusManager.<init>(KeyboardFocusManager.java:394)
at java.awt.DefaultKeyboardFocusManager.<init>(DefaultKeyboardFocusManager.java:45)
at java.awt.KeyboardFocusManager.getCurrentKeyboardFocusManager(KeyboardFocusManager.java:164)
at java.awt.KeyboardFocusManager.getCurrentKeyboardFocusManager(KeyboardFocusManager.java:155)
at java.awt.Container.clearCurrentFocusCycleRootOnHide(Container.java:3027)
at java.awt.Component.hide(Component.java:1327)
at java.awt.Component.show(Component.java:1302)
at java.awt.Component.setVisible(Component.java:1253)
at com.sun.wizards.core.IteratorLayout.addSubtree(IteratorLayout.java:455)
at com.sun.wizards.core.IteratorLayout.addSubtree(IteratorLayout.java:480)
at com.sun.wizards.core.WizardTreeManager.createSubTree(WizardTreeManager.java:1066)
at com.sun.wizards.core.WizardTreeManager.createWizardPanel(WizardTreeManager.java:865)
at com.sun.wizards.core.WizardTreeManager.<init>(WizardTreeManager.java:293)
at com.sun.wizards.core.CommandLineConsole.run(CommandLineConsole.java:66)
at java.lang.Thread.run(Thread.java:595)

Something of a random guess:
Do you have an older version of Java installed?
Do you have CLASSPATH set in your environment pointing to that older installation?
If CLASSPATH is set, try unsetting it and running the command again.

Error when running root.sh after 11.g2 standalone rac installation

Similar Messages

Maybe you are looking for