Error when shipping redo to standby

Hi,
in my alert log and trace file i've a lot of error message like this:
Error 12514 received logging on to the standby
Error 12514 connecting to destination LOG_ARCHIVE_DEST_2 standby host '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XXXX)(INSTANCE_NAME=XXXX)(SERVER=dedicated)))'
Error 12514 attaching to destination LOG_ARCHIVE_DEST_2 standby host '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XXXX)(INSTANCE_NAME=XXXX)(SERVER=dedicated)))'
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2010-07-08 04:40:23.982 62692 kcrr.c
PING[ARC1]: Heartbeat failed to connect to standby '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XXXX)(INSTANCE_NAME=XXXX)(SERVER=dedicated)))'. Error is 12514.
*** 2010-07-08 04:40:23.982 60970 kcrr.c
I think it's a network problem but i don't know how to analyze it.
Now i'm tring to use oswatcher.
My production machine is a Linux x64 with 10.2.0.4 database.

Hemant K Chitale wrote:
The listener on your standby server must be configured for the standby instance.
Hi,
in the standby the listener is up and running.
The service name identified in the LOG_ARCHIVE_DEST_2 is active in my standbydb.
The error occurs sometimes in the nigth and i don't know if it's a network problem or other.

Similar Messages

Error when creating REDO collector

Hi
I am setting up Audit vault in my test environment, and I have successfully installed agent and every looks fine in the web GUI, I see my previous collector and agent is up and running
However, when I try to add redo collector I end up with this:
bash-3.00$ /usr/local/bin/sudo -u myuser $ORACLE_HOME/bin/avorcldb add_collector -srcname INTTDB99.WORLD -agentname agent1 -colltype REDO -av myhost.unix:1521:av3 -collname blah
source INTTDB99.WORLD verified for REDO Log Audit Collector collector
Adding collector...
Collector added successfully.
collector successfully added to Audit Vault
remember the following information for use in avctl
Collector name (collname): blah
initializing REDO Collector
ERROR: java.sql.SQLException: ORA-01031: insufficient privileges
So it gets added, but fails to do whatever it tries to do. Anyone had any similar experiences?
DBAUD collector was installed without any issue.
Running latest available downloadable version
Anything is helpful :) thank you
Johnny
Edited by: Johnny_Johnny on Oct 29, 2009 7:51 AM

Dear jony
the problem here is the REDO collector does not initialize, the APPLY process on the Audit Vault Server and CAPTURE process on the source database
cannot start. This problem happens if the source user account does not
have the correct privileges. Ensure that you ran the zarsspriv.sql script,
after running this script again start collector .Hopefully issue resolved
The other problem could be the compatibility between vesions of Av server and Source databse look in to the pre-requsits of AV server installation for Redo collector.

Unable to ship Redo logs to standby DB (Oracle Data Gaurd)

Hi all,
We have configured Oracle Data Gaurd between our Production (NPP) & Standby (NPP_DR).
The configuration is complete however, the production is unable to ship redo logs to standby DB.
We keep getting the error "PING[ARC0]: Heartbeat failed to connect to standby 'NPP_DR'. Error is 12154." in Primary DB
Primary & DR are on different boxes.
Please see the logs below in the production alert log file & npp_arc0_18944.trc trace files:
npp_arc0_18944.trc :*
2011-01-19 09:17:38.007 62692 kcrr.c
Error 12154 received logging on to the standby
Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'NPP_DR'
Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'NPP_DR'
2011-01-19 09:17:38.007 62692 kcrr.c
PING[ARC0]: Heartbeat failed to connect to standby 'NPP_DR'. Error is 12154.
2011-01-19 09:17:38.007 60970 kcrr.c
kcrrfail: dest:2 err:12154 force:0 blast:1
2011-01-19 09:22:38.863
Redo shipping client performing standby login
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS:could not resolve the connect identifier specified
alert log file on Primary*
Error 12154 received logging on to the standby
Wed Jan 19 09:02:35 2011
Error 12154 received logging on to the standby
Wed Jan 19 09:07:36 2011
Error 12154 received logging on to the standby
Wed Jan 19 09:12:37 2011
Error 12154 received logging on to the standby
Wed Jan 19 09:13:10 2011
Incremental checkpoint up to RBA [0x2cc.2fe0.0], current log tail at RBA [0x2cc.2fe9.0]
Wed Jan 19 09:17:38 2011
Error 12154 received logging on to the standby
Wed Jan 19 09:22:38 2011
Error 12154 received logging on to the standby
Wed Jan 19 09:27:39 2011
Error 12154 received logging on to the standby
However, we are able to tnsping from primary to DR
Tnsping Results
From Primary:
juemdbp1:oranpp 19> tnsping NPP_DR
TNS Ping Utility for HPUX: Version 10.2.0.4.0 - Production on 19-JAN-2011 09:32:50
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/oracle/NPP/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = 10.80.51.101) (PORT = 49160))) (CONNECT_DATA = (SID = NPP) (SERVER = DEDICATED)))
OK (60 msec)
Tnsnames.ora in Primary:
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
NPP.WORLD=
(DESCRIPTION =
    (ADDRESS_LIST =
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = nppjorp)
          (PORT = 49160)
    (CONNECT_DATA =
       (SID = NPP)
       (GLOBAL_NAME = NPP.WORLD)
NPP_HQ.WORLD=
(DESCRIPTION =
   (ADDRESS_LIST =
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = nppjorp)
          (PORT = 49160)
   (CONNECT_DATA =
        (SID = NPP)
        (SERVER = DEDICATED)
NPP_DR.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
   (ADDRESS =
        (COMMUNITY = SAP.WORLD)
        (PROTOCOL = TCP)
        (HOST = 10.80.51.101)
        (PORT = 49160)
(CONNECT_DATA =
        (SID = NPP)
        (SERVER = DEDICATED)
NPPLISTENER.WORLD=
        (DESCRIPTION =
          (ADDRESS =
                (PROTOCOL = TCP)
                (HOST = nppjorp)
                (PORT = 49160)
Listener.ora in Primary
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = NPP.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = NPP)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = nppjorp)
          (PORT = 49160)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = NPP)
      (ORACLE_HOME = /oracle/NPP/102_64)
Thank You,
Salman Qayyum
Edited by: Salman M.A. Qayyum on Jan 19, 2011 8:12 AM

Hi,
Please find the remaining post ...
Tnsnames.ora in DR:
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
NPP.WORLD=
(DESCRIPTION =
    (ADDRESS_LIST =
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = nppjor)
          (PORT = 49160)
    (CONNECT_DATA =
       (SID = NPP)
       (GLOBAL_NAME = NPP.WORLD)
NPP_HQ.WORLD=
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS =
        (COMMUNITY = SAP.WORLD)
        (PROTOCOL = TCP)
        (HOST = hq_nppjor)
        (PORT = 49160)
    (CONNECT_DATA =
        (SID = NPP)
        (SERVER = DEDICATED)
NPP_DR.WORLD=
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS =
        (COMMUNITY = SAP.WORLD)
        (PROTOCOL = TCP)
        (HOST = nppjor)
        (PORT = 49160)
    (CONNECT_DATA =
        (SID = NPP)
        (SERVER = DEDICATED)
        (SERVICE_NAME = NPP_DR)
NPPLISTENER.WORLD=
        (DESCRIPTION =
          (ADDRESS =
                (PROTOCOL = TCP)
                (HOST = nppjor)
                (PORT = 49160)
Listener.ora in DR
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = NPP.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = NPP)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = nppjor)
          (PORT = 49160)
       (ADDRESS =
         (COMMUNITY = SAP.WORLD)
         (PROTOCOL = TCP)
         (HOST = 10.80.50.101)
         (PORT = 49160)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = NPP)
      (ORACLE_HOME = /oracle/NPP/102_64)
/etc/hosts settings in Primary
host:oranpp 25> grep nppjor /etc/hosts
10.32.243.54    nppjor.sabic.com        nppjor
10.32.50.115    nppjorp.sabic.com        nppjorp
/etc/hosts settings in DR
host:oranpp 11> grep nppjor /etc/hosts
10.32.243.54    hq_nppjor.sabic.com     hq_nppjor
10.80.243.54    nppjor.sabic.com        nppjor
10.80.50.115    nppjorp.sabic.com        nppjorp
Thank You,
Salman Qayyum

Getting errors when creating physical standby.

Hello All,
i am getting following error when i creating a physical standby for production,
i used below command to do it
duplicate target database to standby dorecover;
after some time it throwed this error.
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DATA/solfho2/datafile/system.382.764328493'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/12/2011 13:04:06
RMAN-03015: error occurred in stored script Memory Script
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/arch/SOLFHO2/PROLHO01_1_25224_740461103.arc'
ORA-16145: archival for thread# 1 sequence# 25224 in progress

Hello;
Looks like a do over.
I have my short notes here:
http://www.visi.com/~mseberg/duprman2.html
This has been tested several times.
Best Regards
mseberg

Error when trying to recover datafile from standby database to primary

hi friends,
getting problem with restoring datafile from backupset taken on standby database to primary database.
os: windows server 2003
db: oracle 11gR1(11.1.0.6)
i've configured standby database on two different hosts.
host1 - primary (db_uinque_name= prod)
host2 - standby (db_uniue_name= prodsby)
I've configure both database with recovery catalog. I take backup on standby database. users' datafile of primary database has been lost.i'm trying to restore from the backupsets taken on standby database.
with the help of - http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJCEFEG
on primary
c:\>rman target sys/password catalog rcat/password
rman>list backup for db_unique_name prodsby;
display the backupsets
rman>restore datafile 4;
Starting restore at 06-NOV-08
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1051 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 12:12:18
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
also use to tag to restore the datafile
rman>restore datafile 4 from tag='base0_prodsby';
Starting restore at 06-NOV-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 11:27:21
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
i'm getting above errors when try to restore the datafile.
when i issue the following command.
BACKUP AS COPY DATAFILE 4 AUXILIARY FORMAT 'C:\app\Administrator\oradata\prod\USERS01.DBF';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
please friends, try to help me to solve the problem.
Thanks,
Vihang

hi.
Its not necessary its a otherway around to recover datafile from this backupset and apply archivelogs to make datafile consistent.
yes, it ain't the right way to restore backup to primary location.
so how would i connect to standby database with primary and recovery catalog.
i need to connect to recovery catalog and primary site because i need to restore to primary location and recovery catalog contain all metadata and backupsets related information.
i also tried the following steps from oracle documentation.
Connect to the standby database as the target database:
CONNECT TARGET sys@standby
You are prompted for a password:
target database Password: password
Connect to the primary database as the auxiliary database:
CONNECT AUXILIARY sys@primary
You are prompted for a password:
target database Password: password
Back up the datafile on the standby host across the network to a location on the primary host. For example, suppose that /disk1/df2.dbf is the name of datafile 2 on the standby host. Suppose that /disk8/datafile2.dbf is the name of datafile 2 on the primary host. The following command would copy datafile 2 over the network to /disk9/df2copy.dbf:
BACKUP AS COPY DATAFILE 2 AUXILIARY FORMAT '/disk9/df2copy.dbf';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
getting this error.

Got RMAN error when running RMAN backup of archivelogs on physical standby database

Got below error when running RMAN backup of datafiles and archivelogs on physical standby database.
RMAN-06820: WARNING: failed to archive current log at primary database
ORACLE error from target database:
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-00942: table or view does not exist
Could anyone help me? Thanks,

Hello;
When you connect RMAN to the source database as TARGET you must specify a password even if RMAN uses operating system authentication.
So the errors ORA-17627 and ORA-00942 appear to be cause and effect.
What version of Oracle? ( 11.2.0.4 according to the tag )
Can you post your backup script?
Best Regards
mseberg
Update
According to :
Database Error Messages 11g Release 2 (11.2) E17766-03
RMAN-06820: WARNING: failed to archive current log at primary database
Cause: An attempt to switch the archived log at the primary database failed.
So I would check my Primary alert log for an issue.
Message was edited by: mseberg

Error when manually selecting ship-to in sales orders

For my project, I've a scenario like this way:
1. enter transaction code VA01
2. enter order type ZPEA
3. press enter
4. enter sold-to number "1234"
5. press enter
6. deleted the defaulted ship-to number "1234"
7. enter ship-to number "5678"
8. press enter
9. information message "Check route for Ship-to party abc in document header" is displayed
10. press enter
11. Error message 'Ship-to party "5678" is not assigned to a sold-to party' is displayed
Now repeat steps 1. to 4. and make sure you do not press enter after entering the sold-to number
5. enter ship-to number "5678"
6. press enter
No error message is displayed if the data is entered in this sequence
Can you pls explain why the system behaves in a different way depending on the sequence in which the data is entered.
Thanks,
--Manoj
null

> Hi Manoj,
>
> Regarding SH- Irrespective of whether SH is assigned
> in SP master data it is possible to put any SH. SAP
> allows to put any SH in SP's Sales area..
>
> If u r getting errors while different data entry,
> check whether any USEREXIT has been used.
>
> Sam
> Hi Manoj,
>
> Regarding SH- Irrespective of whether SH is assigned
> in SP master data it is possible to put any SH. SAP
> allows to put any SH in SP's Sales area..
>
> If u r getting errors while different data entry,
> check whether any USEREXIT has been used.
>
> Sam
Thanks Sam,
This is same as my conclusion now.
But I may require a bit more help you on like how check for a user exit there in va01 screen?
Thanks,
--Manoj

Help in regarding alert log error...referring to standby

Database: Single Instance, 10.2.0.3
OS: Redhat Linux 5
I checkd on my standby if logs are applied or not by the following command.
SQL> SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
ORDER BY SEQUENCE#;
The result is "YES" for all corresponding logs.
Below is my alert log error.
LNS1 started with pid=46, OS id=27318
Tue Oct 4 03:03:04 2011
Thread 1 advanced to log sequence 32284
Current log# 3 seq# 32284 mem# 0: /u01/oradata/PROD/redo_PROD_03a.log
Current log# 3 seq# 32284 mem# 1: /u02/oradata/PROD/redo_PROD_03b.log
Tue Oct 4 03:03:05 2011
LNS: Standby redo logfile selected for thread 1 sequence 32284 for destination LOG_ARCHIVE_DEST_2 Tue Oct 4 03:03:06 2011
ARCt: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
ARCt: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned Tue Oct 4 03:03:06 2011 Errors in file /u01/app/oracle/admin/PROD/bdump/prod_arct_16306.trc:
ORA-03135: connection lost contact
FAL[server, ARCt]: Error 3135 creating remote archivelog file 'STNBY'
FAL[server, ARCt]: FAL archive failed, see trace file.
Tue Oct 4 03:03:06 2011
Errors in file /u01/app/oracle/admin/PROD/bdump/prod_arct_16306.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing Tue Oct 4 03:03:06 2011 ORACLE Instance PROD - Archival Error. Archiver continuing.
Correspoing trace files is below:
Dump file /u01/app/oracle/admin/PROD/bdump/prod_arct_16306.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name: Linux
Node name: prod-db.aamu.edu
Release: 2.6.9-78.0.17.ELsmp
Version: #1 SMP Thu Mar 5 04:52:17 EST 2009
Machine: i686
Instance name: PROD
Redo thread mounted by this instance: 1
Oracle process number: 45
Unix process pid: 16306, image: [email protected] (ARCt)
*** SERVICE NAME:(SYS$BACKGROUND) 2011-10-02 10:28:10.027
*** SESSION ID:(2005.1) 2011-10-02 10:28:10.027
*** 2011-10-02 10:28:10.027 2549 kcrf.c
tkcrf_clear_srl: Started clearing Standby Redo Logs
*** 2011-10-02 10:28:10.481 2855 kcrf.c
tkcrf_clear_srl: Completed clearing Standby Redo Logs
*** 2011-10-03 03:02:54.982
Redo shipping client performing standby login
*** 2011-10-03 03:02:55.218 65190 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
*** 2011-10-04 03:03:06.584
Error 3135 creating standby archive log file at host 'STNBY'
*** 2011-10-04 03:03:06.584 61283 kcrr.c
ARCt: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
*** 2011-10-04 03:03:06.584 61283 kcrr.c
ARCt: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
ORA-03135: connection lost contact
*** 2011-10-04 03:03:06.591 59526 kcrr.c
kcrrfail: dest:2 err:3135 force:0 blast:1
Error 1041 detaching RFS from standby instance at host 'STNBY'
kcrrwkx: unknown error:3135
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
ARCH: Connecting to console port...
Can someone explain what they mean?
Thank you soo much.

Hello;
I might look at the SQLNET.ORA file on both servers
Try setting these :
SQLNET.INBOUND_CONNECT_TIMEOUT=120
SQLNET.SEND_TIMEOUT = 300
SQLNET.RECV_TIMEOUT = 300
Make sure you restart the LISTENERS.
I'd look at this first :
ORA - 03135 : connection lost contact while shipping from Primary Server to Standby server [ID 739522.1]
I once work with an SE who we called "The human firewall". It was always the firewall until proven otherwise.
And then this :
Troubleshooting ORA-3135 Connection Lost Contact [ID 787354.1]
Have you looked at this ?
Database Hanging during Archival [ID 1142856.1]
Best Regards
mseberg

Error: ORA-16766: Redo Apply unexpectedly offline

I am trying to start DataGuard, but I am getting a 'Error: ORA-16766: Redo Apply unexpectedly offline' error when I do a 'show database verbose' on my standby database (the primary is fine). I do a 'alter database recover managed standby database disconnect from session;', but I am still getting the same error. Both databases are 10.2.0.4. Any ideas? Thanks a lot.

Did you check the standby alert log ?
If you are using dataguard broker you should not be manually starting recovery.
Did you try :-
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;

Error when signing on SRM portal

Hi, i have this problem, when user signs on in the SRM portal (SRM 3.0) and the shopping cart page suppossed to appears (after enters user and pwd), the following error displays:
ITS System Information
Interpreter Failed
The Internet Transaction Server failed to generate the response for current request.
Please contact the system administrator.
Internal error code: 0x2101
In an already existent imlementation for badi BBP_DOC_CHECK_BADI i've added this code just to check some error messages from the document and if founded, add a custom message to the internal table
Data declaration
Variable
data:
lv_guid type CRMD_ORDERADM_H-GUID.
Constants
constants:
    lc_slash(1) type c value '/',
    lc_015       type bbp_pds_messages-msgno value '015',
    lc_000       type bbp_pds_messages-msgno value '000',
    lc_fmavc     type bbp_pds_messages-msgid value 'FMAVC',
    lc_zebp      type bbp_pds_messages-msgid value 'ZEBP'.
Internal tables & Structures
data:
    ls_messages type          bbp_pds_messages,
    lt_messages type table of bbp_pds_messages.
First, check the SC
    call function 'BBP_PD_SC_CHECK'
      exporting
        i_guid     = lv_guid
     TABLES
       E_MESSAGES = lt_messages.
Look for the right message
read table lt_messages into ls_messages with key msgid = lc_FMAVC
                                                   msgno = lc_015.
if sy-subrc = 0.
Message founded, build custom message
Add the message to table
read table it_account into wa_account index 1.
    wa_error-msgty = 'E'.
    wa_error-msgid = lc_zebp.
    wa_error-msgno = lc_000.
    concatenate wa_header-posting_date+0(4) " Year
                lc_slash
                wa_account-funds_ctr         " Funds center
                lc_slash
                wa_account-fund              " Fund
                lc_slash
                wa_account-func_area         " Functional area
                lc_slash
                wa_account-cmmt_item         " Commitment item
           into wa_error-msgv1.
    APPEND wa_error TO et_messages.
endif.
but in the call for 'BBP_PD_SC_CHECK' the systems generates a dump, if i comment the fm call, the page displays correctly, the parameters for fm are the right type.
The dump appears as follows:
Errores tiempo ejec.   UNCAUGHT_EXCEPTION
Excepción              CX_BBP_PD_ABORT
       ocurrido el     26.12.2007 a 19:42:04
Es ist eine Ausnahme aufgetreten, die nicht abgefangen wurde.
¿Qué ha sucedido?
Die Ausnahme 'CX_BBP_PD_ABORT' wurde ausgelöst,
sie wurde aber entlang der Aufrufhierarchie nirgendwo abgefangen.
Da Ausnahmen Fehlersituationen darstellen und auf diesen Fehler nicht
adäquat reagiert wurde, mußte das laufende ABAP-Programm 'SAPLBBP_PDH'
abgebrochen werden.
¿Qué puede hacer?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Anál.errores
Es ist eine Ausnahme aufgetreten, die weiter unten näher erläutert wird.
Die Ausnahme, der die Klasse 'CX_BBP_PD_ABORT' zugeordnet ist,
wurde nicht abgefangen und führte deshalb zu einem Laufzeitfehler.
Der Grund für die Ausnahme ist:
Übernehmen
Notas para corregir errores
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"UNCAUGHT_EXCEPTION" CX_BBP_PD_ABORTC
"SAPLBBP_PDH" or "LBBP_PDHU08"
"BBP_PD_ABORT"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Entorno sistema
SAP-Release.............. "620"
Applikationsserver....... "ebpqas"
Netzwerkadresse.......... "144.127.70.32"
Betriebssystem........... "SunOS"
Release.................. "5.9"
Hardwaretyp.............. "sun4u"
Zeichen-Länge............ 8 Bits
Pointer-Länge............ 64 Bits
Workprozess-Nummer....... 0
Kurzdump-Einstellung..... "full"
Datenbankserver.......... "ebpqas"
Datenbanktyp............. "ORACLE"
Datenbankname............ "EBQ"
Datenbank-User-Id........ "SAPEBP"
Zeichensatz.............. "es"
SAP-Kernel............... "640"
hergestellt am........... "Jul 4 2005 21:14:29"
hergestellt auf.......... "SunOS 5.8 Generic_108528-16 sun4u"
Datenbankversion......... "OCI_920 "
Patch-Level.............. "80"
Patch-Text " "
Unterstützte Umgebung....
Datenbank ............... "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP-Datenbankversion..... "640"
Betriebssystem........... "SunOS 5.8, SunOS 5.9, SunOS 5.10"
Usuario, transacción....
Mandant............. 010
Benutzer............ "CRARIABR"
Sprachenschlüssel... "S"
Transaktion......... "BBPSC02 "
Programm............ "SAPLBBP_PDH"
Dynpro.............. "SAPLBBP_SC_UI_ITS 2000"
Dynprozeile......... 4
Info posición de cancelación
Der Abbruch trat im ABAP-Programm "SAPLBBP_PDH" auf, und zwar in
"BBP_PD_ABORT". Das Hauptprogramm war "SAPLBBP_SC_UI_ITS ".
Im Quelltext befindet sich die Abbruchstelle in Zeile 67
des (Include-)Programms "LBBP_PDHU08".
(bei Anwahl des Editors: 670) der ABAP-Source "LBBP_PDHU08".
Detalle código fuente
000370                   LS_CALLSTACK1-EVENTNAME LS_CALLSTACK1-PROGNAME
000380                   INTO LV_MSGARG2 SEPARATED BY SPACE.
000390
000400     READ TABLE LT_CALLSTACK INTO LS_CALLSTACK2 INDEX 4.
000410     CONCATENATE   '/' LS_CALLSTACK2-EVENTTYPE
000420                   LS_CALLSTACK2-EVENTNAME LS_CALLSTACK2-PROGNAME
000430                   INTO LV_MSGARG3 SEPARATED BY SPACE.
000440
000450     CALL FUNCTION 'BBP_ALERT_INTERNAL_OT'
000460       EXPORTING
000470         MSGID   = GC_MSGID_BBP_PD
000480         MSGNO   = 047
000490         MSGARG1 = LV_MSGARG1
000500         MSGARG2 = LV_MSGARG2
000510         MSGARG3 = LV_MSGARG3.
000520
000530     MESSAGE ID GC_MSGID_BBP_PD TYPE C_MSGTY_I NUMBER IV_MSG_NO
000540             WITH LS_CALLSTACK1-EVENTTYPE
000550                  LS_CALLSTACK1-EVENTNAME
000560                  LS_CALLSTACK1-PROGNAME.
000570
000580   * get the messages from the application log
000590     TRY.
000600         CALL FUNCTION 'BBP_PD_LOG_GET_MESSAGES'
000610           TABLES
000620             E_MESSAGES = LT_MESSAGES.
000630       CATCH CX_BBP_PD_ABORT.
000640         REFRESH LT_MESSAGES.
000650     ENDTRY.
000660
    RAISE EXCEPTION TYPE CX_BBP_PD_ABORT EXPORTING
000680         WORKED_ON_DOCUMENT = LV_GUID
000690         T100_MSGID = GC_MSGID_BBP_PD
000700         T100_MSGNO = IV_MSG_NO
000710         T_APPL_LOG_MESSAGES = LT_MESSAGES.
000720
000730   ENDFUNCTION.
Thanks in advance for your help.

Hi
It seems some mandatory System configuration settings are missing.
For time-being, please Try de-activating the active customer implementations of the BADIs BBPDOC_CHANGE / BBP_DOC_CHECK_BADIs and then try again the Shop process._
Please try to look into RZ20, ST22, RZ10, and SLG1 transactions for any error logs generated.
Also, Please Check the SAP OSS Notes ->
Note 673372 - Short dumps UNCAUGHTEXCEPTION in SRM 3.0, 4.0, and 5.0_
Note 833442 Data inconsistency due to termination when you save
bbp_pd_sc_check_is_pd
"Buffer table not up to date"
Re: ITS Template not found
Re: CX_BBP_PD_ABORT error selection itens in SC
DUMP with transaction BBPSC02 :'UNCAUGHT_EXCEPTION      CX_BBP_PD_ABORT'
Re: Error while adding items to shopping cart
Note 851825 Copying a reference without ship-to address ==> error
Note 847427 Error when you copy template without ship-to address
Note 746569 CX_BBP_PD_ABORT in routine CHECK_CF_QUANTITY
Note 651994 PO with several hierarchy levels causes termination
Hope this will definitely help. Do let me know.
Regards
- Atul

Error: ORA-16778: redo transport error for one or more databases

Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>

This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry

Error when trying to access OAM 11g Admin console

I am getting an error when I try to access the OAM admin console, the page appears after I enter http://hostname:14100/oam but the login box has the following message in it:
System error. Please re-try your action. If you continue to get this error, please contact the Administrator.
I tried entering http://hostname:14100/oam_console but get a 404 error
The log file outputs the following:
[oracle@core bin]$ startManagedWebLogic.sh oam_server1
JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=512m
WLS Start Mode=Production
CLASSPATH=/opt/oracle/product/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar::/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/policy/sts-policies.jar:/opt/oracle/product/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/product/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/product/Middleware/jdk/lib/tools.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/oracle/product/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/product/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/opt/oracle/product/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/oracle/product/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/opt/oracle/product/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/opt/oracle/product/Middleware/Oracle_IDM1/oam/agent/modules/oracle.oam.wlsagent_11.1.1/oam-wlsagent.jar:/opt/oracle/product/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/opt/oracle/product/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/xqrl.jar
PATH=/opt/oracle/product/Middleware/wlserver_10.3/server/bin:/opt/oracle/product/Middleware/modules/org.apache.ant_1.7.1/bin:/opt/oracle/product/Middleware/jdk/jre/bin:/opt/oracle/product/Middleware/jdk/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/opt/Oracle/bin:/opt/oracle/product/Middleware/user_projects/domains/iam/bin:/opt/oracle/product/Middleware/OPatch:/opt/oracle/product/11.2.0/dbhome_1/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1432-linux-x86_64, compiled mode)
Starting WLS with line:
/opt/oracle/product/Middleware/jdk/bin/java -server -Xms256m -Xmx512m -XX:MaxPermSize=512m -Dweblogic.Name=oam_server1 -Djava.security.policy=/opt/oracle/product/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/opt/oracle/product/Middleware/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/opt/oracle/product/Middleware/wlserver_10.3 -Dwls.home=/opt/oracle/product/Middleware/wlserver_10.3/server -Dweblogic.home=/opt/oracle/product/Middleware/wlserver_10.3/server -Dcommon.components.home=/opt/oracle/product/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/opt/oracle/product/Middleware/user_projects/domains/iam -Djrockit.optfile=/opt/oracle/product/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/servers/oam_server1 -Doracle.domain.config.dir=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig -Digf.arisidbeans.carmlloc=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/carml -Digf.arisidstack.home=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/opt/oracle/product/Middleware/user_projects/domains/iam/servers/oam_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/opt/oracle/product/Middleware/Oracle_IDM1/oam/agent/modules/oracle.oam.wlsagent_11.1.1,/opt/oracle/product/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/opt/oracle/product/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -DOAM_POLICY_FILE=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/oam-policy.xml -DOAM_CONFIG_FILE=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/oam-config.xml -DOAM_ORACLE_HOME=/opt/oracle/product/Middleware/Oracle_IDM1/oam -Doracle.security.am.SERVER_INSTNCE_NAME=oam_server1 -Does.jars.home=/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/lib/oes-d8 -Does.integration.path=/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/lib/oeslib/oes-integration.jar -Does.enabled=true -Djavax.xml.soap.SOAPConnectionFactory=weblogic.wsee.saaj.SOAPConnectionFactoryImpl -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Djavax.xml.soap.SOAPFactory=oracle.j2ee.ws.saaj.soap.SOAPFactoryImpl -Doracle.oaam.home=/opt/oracle/product/Middleware/Oracle_IDM1/oaam/ -Doracle.oaam.home=/opt/oracle/product/Middleware/Oracle_IDM1/oaam/ -Doracle.oaam.home=/opt/oracle/product/Middleware/Oracle_IDM1/oaam/ -Djava.awt.headless=true -Dem.oracle.home=/opt/oracle/product/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://core.apteclabs.edu:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/opt/oracle/product/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/opt/oracle/product/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
[WARN ][jrockit] MaxPermSize=512m ignored: Not a valid option for JRockit
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
<Aug 16, 2011 9:34:29 AM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Aug 16, 2011 9:34:36 AM EDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 16, 2011 9:34:37 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.1.3-11-141760-1.6.0_24-20110301-1432-linux-x86_64 from Oracle Corporation>
<Aug 16, 2011 9:34:45 AM EDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<Aug 16, 2011 9:34:54 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Aug 16, 2011 9:37:45 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2011 9:37:45 AM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 16, 2011 9:38:02 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/oracle/product/Middleware/user_projects/domains/iam/servers/oam_server1/logs/oam_server1.log is opened. All server side log events will be written to this file.>
Aug 16, 2011 9:38:25 AM oracle.security.am.common.nap.util.NAPLogger log
SEVERE: Failed to communicate with any of configured Access Server, ensure that it is up and running.
<Aug 16, 2011 9:38:27 AM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Aug 16, 2011 9:38:52 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 16, 2011 9:38:52 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2011 9:39:28 AM EDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in /opt/oracle/product/Middleware/Oracle_IDM1/oam/agent/apps/oam-wlsagent-logout.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Aug 16, 2011 9:39:46 AM EDT> <Warning> <Coherence> <BEA-000000> <2011-08-16 09:39:46.790/320.434 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=DistributedCache, member=3): Assigned 257 orphaned primary partitions>
[EL Info]: 2011-08-16 09:39:47.585--ServerSession(474132858)--EclipseLink, version: Eclipse Persistence Services - 1.1.0.r3634
[EL Info]: 2011-08-16 09:39:48.526--ServerSession(474132858)--file:/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/lib/oes-d8/jps-internal.jar-JpsDBDataManager login successful
<Aug 16, 2011 9:40:01 AM EDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Aug 16, 2011 9:40:01 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 16, 2011 9:40:01 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.184.128:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:20c:29ff:fe26:71ec:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 0:0:0:0:0:0:0:1:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "oam_server1" for domain "iam" running in Production Mode>
<Aug 16, 2011 9:40:04 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 16, 2011 9:40:04 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Aug 16, 2011 9:43:32 AM EDT> <Error> <HTTP> <BEA-101017> <[ServletContext@477181353[app:oam_server module:oam path:/oam spec-version:2.5]] Root cause of ServletException.
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /index.jsp
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
Truncated. see log file for complete stacktrace
>
<Aug 16, 2011 9:43:32 AM EDT> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'oam_server1' has triggered at Aug 16, 2011 9:43:32 AM EDT. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Aug 16, 2011 9:43:32 AM EDT SERVER = oam_server1 MESSAGE = [ServletContext@477181353[app:oam_server module:oam path:/oam spec-version:2.5]] Root cause of ServletException.
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /index.jsp
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:265)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:120)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE = core.apteclabs.edu TXID = CONTEXTID = 11d1def534ea1be0:7f0631a0:131d2d0d910:-8000-0000000000000020 TIMESTAMP = 1313502212548
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Aug 16, 2011 9:43:51 AM EDT> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in /opt/oracle/product/Middleware/user_projects/domains/iam/servers/oam_server1/adr/diag/ofm/iam/oam_server1/incident/incdir_8 with a lockout minute period of 1.>
Any ideas?

Hi,
Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
Then, find "oamconsole" in the Deployments listed (on the right).
Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
Jim

Error when Creating a delivery for an STO DEL

I have a client that at first was getting an error about shipping point can not be determined. I extended the sales view, and also created the Sales Org and division. When I created the delivery it worked. Then when the client tested this, it did not work gets the error message when trying to create the delivery in VL10B that states Document is incomplete. You can not save delivery. Then I went to the material master and checked the settings on the sales org and sales division..for whatever reason it was not there, so I repopulated the information...It worked and went all the way through. Now today...it gives me the same error message and the sales org division and everything is there. I can not create a delivery. Any information or clue would be greatly appreciated. I am testing all with the same material number, same plants, same info....

Unfortunately I did not see anything in this note that would help it appeared to be talking about IM and QM.
I do agree there is some inconsistencies and I am just not sure where....None of this makes any sense as I said one day it will work and then the next time you try it, it gives the error message....I am so at a lost at this point...

Error when calling a Webservice's public method in Forms10g

Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
Carlos

I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM

7.3.2.6 crashes when coming out of standby mode

Has anyone else seen this problem with iTunes 7.3.2.6?
It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
Using standby was OK with iTunes 7.2.

Okay. Let's try getting a fresh one through to Roy.
If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
In the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Error when shipping redo to standby

Similar Messages

Maybe you are looking for