Error when synchronizing using HTTPS in NW Mobile Client

Hi all,
we are required to have secure communication during synchronization of data between the PDA handheld and the DOE.
Therefore, we are using the HTTPS synchronization you can select in the NW Mobile Client under Connection Settings (just set the check mark under "Secure Connection (HTTPS)"
However, when I synchronize, I receive the error message "SSL Certificate not available in trust store".
I could not find anything about how to overcome this error, how to install the certificate, or even where to find the certificate.
Could someone please shed some light on this.
Thanks,
Wolfgang

Hi,
Try using the default password 'changeit'. It should work.
You can import your certificate to trust store using following command
keytool -import -file "C:\Documents and Se
ttings\I041510\Desktop\ds.cer" -alias "al1" -keypass "changeit" -trustcacerts -k
eystore "C:\Program Files\SAP\SAP Netweaver Mobile Client\settings\truststore"
i.e)
keytool -import -file "your certificate file" -alias "your alias name" -keypass "changeit" -trustcacerts -k
eystore "C:\Program Files\SAP\SAP Netweaver Mobile Client\settings\truststore"
For more information about keytool command check the following link
http://java.sun.com/j2se/1.3/docs/tooldocs/win32/keytool.html
Regards,
Dhana

Similar Messages

INTERNAL.CLIENT_RECEIVE_FAILED Error when receiving by HTTP

Hello my name is Arkaitz.
I have this error *"INTERNAL.CLIENT_RECEIVE_FAILED Error when receiving by HTTP (error code: 110, error text: )"*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DD351E48-7EED-DA5D-E100-0000AC1D4E74</SAP:MessageId>
<SAP:RefToMessageId>4E111D48-1C55-742C-E100-00000AD2202B</SAP:RefToMessageId>
<SAP:TimeSent>2008-05-05T15:59:00Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>ECYR</SAP:Service>
<SAP:Interface namespace="" />
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>BSBWC_35</SAP:Service>
<SAP:Interface namespace="http://www.ecyr.report.bw.sql">MI_1</SAP:Interface>
<SAP:Mapping />
</SAP:Receiver>
<SAP:Interface namespace="http://www.ecyr.report.bw.sql">MI_2</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2008-05-05T15:59:00Z" wasRead="false">
<SAP:Engine type="BS">BSBWC_35</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>4E111D48-1C55-742C-E100-00000AD2202B</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2008-05-05T16:02:50Z" wasRead="false">
<SAP:Engine type="IS">is.00.EMSXIL601PRE</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>4E111D48-1C55-742C-E100-00000AD2202B</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20080505</SAP:Date>
<SAP:Time>175900</SAP:Time>
<SAP:Host>emmbwl501pre</SAP:Host>
<SAP:SystemId>BWC</SAP:SystemId>
<SAP:SystemNr>22</SAP:SystemNr>
<SAP:OS>Linux</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>ES78914719V</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_SENDER</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>SENDER</SAP:PipelineIdExternal>
<SAP:PipelineElementId>FEC5B93B44BBA66BE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_INTEGRATION_SERVER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>A</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="420">SND_CENTR</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>198</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>0</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>198</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PROXY</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>52</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="emmbwl501pre">20080505155900.452389</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="emmbwl501pre">20080505155900.454147</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_INTEGRATION_SERVER</SAP:Name>
<SAP:Timestamp type="begin" host="emmbwl501pre">20080505155900.454636</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_INTEGRATION_SERVER</SAP:Name>
<SAP:Timestamp type="end" host="emmbwl501pre">20080505155901.884062</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = BWC</Trace>
<Trace level="1" type="T">client = 420</Trace>
<Trace level="1" type="T">language = S</Trace>
<Trace level="1" type="T">user = ES78914719V</Trace>
<Trace level="1" type="Timestamp">2008-05-05T15:59:00Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 4E111D481C55742CE10000000AD2202B</Trace>
<Trace level="1" type="T">PLNAME = SENDER</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline SENDER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_SENDER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_CALL_INTEGRATION_SERVER">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="T">URL for integration server read from global configuration</Trace>
<Trace level="1" type="T">URL= Dest://SAPISU_XII</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Can you help me?
thank

Hi,
I think it is the problem with your HTTP connection used by ABAP proxy. so when your PI system tries to connect to ECC using HTTP it fails to connect.
Regards,
Indranil
Award points if applicable

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Hi All , Getting connection to Gateway error when synchronizing in MI

Hi All , Getting connection to Gateway error when synchronizing in MI using MAU application .
Please provide the solution ASAP.
Also provide the notes which can be avilable in SERVICE.SAP
Thanks&Regards.
Bharat

Hi,
well, the error - you should get this error as well if you sync with a new and empty client? It seems your Sync service is down. Check the sync service itself. Is the URL accessible from the device itself?
It is usually not related to the App (MAU in your case) it is related to the ladscape itself.
Can you add the correct error message and the part of the trace that shows the message? Including the lines before with the ping if the server is available?
Regards,
Oliver

SelectInputText error when migrating to https - ADF 10g

This is a follow-on of this thread in the JHeadstart forum:
LoV opening error when migrating to https
ADF/JDev 10.1.3.2 build 4066
The app works fine in IE8 and Firefox when using HTTP. It also works in Firefox using HTTPS.
However, in IE8, the LOV window does not popu up for an af:selectInputText component. The server log does not provide any clues.
Does anyone know if HTTPS in ADF 10g is not supported for IE8?
Thanks,
Peter

Oracle Support had a similar idea: upgrade to 10.1.3.5 because it is certified for IE8 whereas 10.1.3.2 is not.
However, we edited the mod_osso.conf for that OC4J instance and added the following in the Location tag for the problem application:
OssoSendCacheHeaders off
The LOVs now appear in IE8 under HTTPS.
Thanks for the input, Steven; you were of course right about this not being related to JHS. We'll keep the upgrade solution in mind in case of other unexplained problems with IE8.
Regards,
Peter

I have recently changed my mobile number, however when I use iMessage my old mobile number is still used. I realised that my old number is still registered to my iTunes account, how do I change this to my new number?

I have recently changed my mobile number, however when I use iMessage my old mobile number is still used. I realised that my old number is still registered to my iTunes account, how do I change this to my new number

See if this Link offers any enlightenment...
Changing Account Information
http://support.apple.com/kb/HT1918

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

IDoc_02_Error passing data to port-Communication error when sending with HTTP

Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Am getting error error when am using wm_concat funcation.

hi all
am getting error error when am using wm_concat funcation.
SQL> DECLARE
2 ex VARCHAR2(200);
3 BEGIN
4 SELECT wm_concat(ename) INTO EX FROM EMP WHERE deptno=30;
5 DBMS_OUTPUT.PUT_LINE(EX);
6 END;
7
8 .
SQL>
SQL> /
DECLARE
ERROR at line 1:
ORA-06550: line 4, column 10:
PL/SQL: ORA-00904: "WM_CONCAT": invalid identifier
ORA-06550: line 4, column 3:
PL/SQL: SQL Statement ignoredThanks for all in advance
Edited by: maddy on 9 Jan, 2012 10:02 PM

>
WM_CONCAT is undocumented and unsupported by Oracle, meaning it should not be used in production systems.
>
so change your way
btw
for me
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> set serveroutput on
SQL> DECLARE
2   ex varchar2(200);
3   BEGIN
4   SELECT wm_concat(ename) INTO EX FROM EMP WHERE deptno=30;
5   DBMS_OUTPUT.PUT_LINE(EX);
6   END;
7 /
ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
PL/SQL procedure successfully completed.
SQL> try wmsys.wm_concat

When we Use HTTPS and HTTP

Hi Frnds,
when we Use HTTP's and HTTP.
Can anyone explain...
Regards,
Raj

Hi
A general defination of HTTP and HTTPS would be :
HTTP
HTTP is the protocol that a web browser such as Internet Explorer uses to request a web page from a web server.
It can be "implemented on top of any other protocol on the Internet, or on other networks. HTTP only presumes a reliable transport; any protocol that provides such guarantees can be used."
HTTPS
HTTPS is an encrypted form of HTTP used for sending sensitive data like credit card numbers between the browser and the web server. This is also sometimes called Secure HTTP or SSL (which stands for Secure Sockets Layer).
All XI runtime components using the HTTP protocol support the encryption of the HTTP data stream by means of the SSL protocol, also known as HTTPS. HTTPS data streams are completely transparent to the Exchange Infrastructure.
To enable an HTTPS connection, two steps are required:
       1.      Both parties of an HTTP connection (that is, the HTTPS client and the HTTPS server) must be technically enabled.
       2.      The internal XI communications and the messaging communications must be configured in XI to use these HTTP connections.
In addition, for certain adapters you can enforce HTTP security for incoming messages.
Technically Enabling SSL
Whenever a hardware or software component is to be enabled for SSL, the client and the server part of an HTTP connection have to be enabled differently. Moreover, the technical configuration for HTTPS is different for XI ABAP and J2EE components. For more information, see Transport Layer Security.
HTTPS comes in two flavors, both ensuring the confidentiality of data sent over the network
●      Server authentication
Only the HTTP server identifies itself with a certificate that is to be verified by the client.
●      Client authentication
Additionally, the HTTP client identifies itself with a certificate that is to be verified by the server.
Hope this clears your doubts
Thanks
Saiyog

ORA-01740: missing quotes error when synchronizing mobilink

Hi,
I'm getting a missing quotes error when synchronizing with mobilink.
followed by
[-10058] Unable to open download_delete_cursor
and the name of the table.
and name of the script
Script: {CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (?, ?)}
How can I see what is causing this... I already checked the script for that table in the ml_scripts table.... nothing special there... the script looks exactly the same as in previous versions....
I'm assuming that it's the parameters that are creating the problem. but no idea on how to see them...
any suggestions?
thank you !

Hi,
thanks for your tip. I just did that and get a LOT of logging.
Not sure if my employer would appreciate me sharing DB details in public.
In private messaging I could send it through, but i guess that wouldn't help others with the same issue..
i also changed the startup parameters to -vt -o
And this is the result that I get (I modified scriptpackage name and cursorname a litle bit):
I'm guessing that : p1 and : p2 is incorrect as parameter....and the complaints come from there..
Also, this time I ran another publication and now it's complaining on the newly added table and not on that random old table I mentioned on my previous post.
PS. error message is in dutch since the server is in dutch, but it's the missing quotes issue.
I. 2014-03-31 15:36:26. <1> COMMIT Transaction: prepare_for_download
I. 2014-03-31 15:36:26. <1> Translated SQL:
                        CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (:p1, :p2)
E. 2014-03-31 15:36:26. <1> [-10002] Consolidated database server or ODBC error: ODBC: [Sybase][iAnywhere Solutions - Oracle][Oracle]ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                        ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                         (ODBC State = 42000, Native error code = 1740)
E. 2014-03-31 15:36:26. <1> [-10002] Consolidated database server or ODBC error: ODBC: [Sybase][iAnywhere Solutions - Oracle][Oracle]ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                        ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                         (ODBC State = 42000, Native error code = 1740)
E. 2014-03-31 15:36:26. <1> [-10058] Unable to open download_delete_cursor
I. 2014-03-31 15:36:26. <1> Error Context:
I. 2014-03-31 15:36:26. <1> Remote ID: c44a5403-74ba-4c98-bf6d-4e1db5fb24c9
I. 2014-03-31 15:36:26. <1> User Name: USR:66ed647c-20b1-4cff-9663-8147b0e7e2fd
I. 2014-03-31 15:36:26. <1> Modified User Name: USR:66ed647c-20b1-4cff-9663-8147b0e7e2fd
I. 2014-03-31 15:36:26. <1> Transaction: download
I. 2014-03-31 15:36:26. <1> Table Name: MY_NEWLY_ADDED_TABLE
I. 2014-03-31 15:36:26. <1> Script Version: scriptversion
I. 2014-03-31 15:36:26. <1> Script: {CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (?, ?)}
I. 2014-03-31 15:36:26. <1> End of Error Context
I. 2014-03-31 15:36:26. <1> ROLLBACK Transaction: end_download
I. 2014-03-31 15:36:26. <1> ROLLBACK Transaction: end_synchronization

Apache is throwing NLS_LANG error when connecting via HTTPS using a DAD

Our Apache server is throwing this error
[Wed May 6 11:53:52 2009] [alert] [client 69.246.251.48] [ecid: 223452213192,1] mod_plsql: Unable to issue alter session : alter session set nls_language= "AMERICAN" ""
every time we connect to the server using HTTPS (the connection is using DAD -- see below for the DAD configuration).
If we run the same connection using HTTP it works fine.
Anyone know why this would happen and how we can correct it?
DAD configuration:
<Location /plshes>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername hes
PlsqlDatabasePassword @<password here>=
PlsqlDatabaseConnectString hpprd NetServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA_WE8ISO8859P1
PlsqlAuthenticationMode PerPackageOwa
PlsqlSessionStateManagement StatelessWithFastResetPackageState
PlsqlErrorStyle ModPlsqlStyle
PlsqlAlwaysDescribeProcedure Off
</Location>

@AMN -- I'm sort of in your camp in that I don't think I should have to remove that line (which I've not been able to test yet, by the way). It's possible removing the line might bypass the issue since the statement will never get issued in the first place, but I will know there is some sort of issue between HTTP and HTTPS that is throwing this error.
To answer your questions:
1. The portal database (IASDB) returns:
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET WE8ISO8859P1
2. What do you mean by "pls/hes"?
3b. Which type of OAS? Can you clarify this question? OAS 10g (which means IASDB is version 9i). We run Apache using Webcache. This OAS serves up a custom application written largely in Forms and PL/SQL. Hmmm, maybe that's not what you mean by this question , though...
3a. Explain our SSL configuration -- I'll try. I configfured this 4 to 5 years ago and haven't changed it at all other than to update the Oracle Wallet certificates every year or two. We have a single physical server that hosts our infrsastructure and mid-tier components and nothing more. As mentioned, Apache is our webserver and we run Oracle's Webcache. The twist in our configuration (and probably the source of this issue we are having is somewhere in this twist) is that we use one physical server and one Apache web server to serve up both HTTP and HTTPS using a virtual host within Apache and then we deifned multiple sites and origin servers with several redirects on various ports so we can handle SSL and non-SSL connections depending on whether they come to us externally (inTERnet) or internally (inTRAnet).
Webcache sites (hes2 is the server name):
Site Origin Server
hes2:7778 hes2:7779
www.OurWebSite.com:80 hes2:8000
hes2:80 hes2:7779
sso.OurWebSite.com:80 hes2:7777
www.OurWebSite.com:443 hes2:4444
Webcache origin servers:
hes2:7777 HTTP
hes2:7779 HTTP
hes2:8000 HTTP
www.OurWebSite.com:4444 HTTPS
Webcache listen ports:
443 HTTPS -- has Oracle wallet defined for it
7778 HTTP
80 HTTP
Navigating to http://www.OurWebSite.com will redirect to hes2:8000, which is our virtual server (configuration below). Navigating to https://www.OurWebSite.com will redirect to hes2:4444.
There is probably a little more I need to provide to answer the "SSL configuration" question, but I think that is enough for now as this is already a long response -- my apologies for that.
Virtual host configuration in httpd.conf:
<VirtualHost *:8000>
ServerName www.OurWebsiteName.com
ServerAdmin [email protected]
Port 80
DocumentRoot "/u01/app1/oracle/10gasm/Apache/Apache/htdocs"
RewriteEngine on
RewriteOptions inherit
RewriteCond %{HTTP_HOST}!^www\.OurWebSite\.com [NC]
RewriteRule ^/(.*) http://www.OurWebSite.com/$1 [L,R]
OssoIpCheck off
OssoConfigFile /u01/app1/oracle/10gasm/Apache/Apache/conf/osso/osso-www.conf
<Location /portal>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /forms>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /discoverer>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/docs>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/images>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/optiform>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
LogLevel error
ErrorLog "|/u01/app1/oracle/10gasm/Apache/Apache/logs/www_error_log 43200"
</VirtualHost>

Can I get a response back when I use HTTP adapter

Hi ,
I am doing a integration between SAP and ThirdParty Product using PI 7.1.
The scenario is ThirdParty -> PI -> SAP ,using HTTP adapter between ThirdParty and PI , and IDoc adapter between SAP and PI.
So,its a HTTP sender and IDoc receiver.
So I was just curious to know if the IDoc posting failed in SAP ,can I send a response from SAP to Thirdparty regarding the failure along with some error message.
Thanks for your responses.
Venu

Hi,
It may lead to some timeout problems if you design your scenario as synchronous i.e sending response back to HTTP..
as SAP may take time to process idoc and need to provide response back to PI ..by that time the connection may become invalid and thirdparty may receive response as timeout error...
As anyway PI has the option of Alert managements..you can trigger the error mail to the third party recipients for letting them the status...
HTH
Rajesh

Sharepoint-Hosted App giving FORBIDDEN error when i use REST Api

Hi,
I have created a sharepoint hosted app which will create Team site on button click.
I used REST Api and NAPA Tool to develop this app.
Napa tool gives to things ClientWebpart.aspx and Default.aspx.
When i run my Default.aspx code is working fine but ClientWebpart.aspx is giving FORBIDDEN error when i am trying to create site.
Below is the code which i used to create site
code:
var hostweburl;
var appweburl;
$(document).ready(function () {
hostweburl= decodeURIComponent(getQueryStringParameter("SPHostUrl"));
appweburl = decodeURIComponent(getQueryStringParameter("SPAppWebUrl"));
function createSPWeb() {
$.ajax(
url: appweburl +
"/_api/SP.AppContextSite(@target)/web/webinfos/add?@target='" +
hostweburl + "'",
type: "POST",
data: JSON.stringify(
'parameters':
'__metadata': { 'type': 'SP.WebInfoCreationInformation' },
'Url': 'RestSubWeb',
'Title': 'RestSubWeb',
'Description': 'REST created web',
'Language': 1033,
'WebTemplate': 'sts#0',
'UseUniquePermissions': false
headers: {
"accept": "application/json;odata=verbose",
"content-type": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
success: successHandler,
error: errorHandler
NOTE:This is on sharepoint online.
Please help
Regards,
sudeep

So in the app you are testing, are you using the FQDN or the NetBIOS name? Bad practice but could you test with both (hard code the absolute URL for testing purposes) then retest your app?
If you are making a web part based on the new app model this will be an "app part" and probably have the same issues you are experiencing. If this is for something internal rather than a product you are developing to resell then the script editor /
content editor web part approach could work for you.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Error when synchronizing using HTTPS in NW Mobile Client

Similar Messages

Maybe you are looking for