IDoc_02_Error passing data to port-Communication error when sending with HTTP
Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.
status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari
Similar Messages
-
Communication error when sending PI message from Integration Engine to AE
Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- <!-- ************************************
-->
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule SUFFICIENT ok exception true Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule SUFFICIENT ok false true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule REQUISITE ok exception true Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!
<!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- <!-- ************************************
-->
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace> -
Error when sending by HTTP (error code 200, error text OK)
We receive a quantity of messages everyday that "sometimes", for some
strange reason, seem to fail in XI, with the message:
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>200</SAP:P1>
<SAP:P2>OK</SAP:P2>
<SAP:Stack>HTTP response contains status code 200 with the description
OK System error in parser</SAP:Stack>
We checked out note 871959 but we are in a higher SP release XI 3.0
(14), and the corrections are implemented.
Any other reccomendations?EXACT, but the interface monitor shows that as an error.
And that's what I need, a good monitoring, that should not appear as an error -
Info IDoc : sent, not arrived ; Error passing data to port
Hi Folks,
While I am loading the data from R/3 I am facing the following error in Production..
Info IDoc 2 : sent, not arrived ; Error passing data to port
when I checked in SM59 every thing seems fine like RFC test connection and authorization check
In BW is check the Source system saying it is Ok.
Only the thing I found here is in TRFC, it is error when opening RFC Connection.
but it is different in SM59 saying every thing is ok, as said above..
Please help me in this regard
thanks masters
DJSrinivas,
Thanks for your prompt reply..
user : ALEREMOTE and password are fine..
As told I check st22 and sm21 in both sytems, no sort dumps I found..
Please help me its an urgent..
thanks
DJ
Message was edited by:
Jangareddy dasari -
Outbound IDOC( Error passing data to port)
Hi,
We have an interface running daily configured such that the idocs are converted to files and placed on a directory path.
All the idocs are processed successfully but for one hour the idocs failed and the error message says:
Status: Error passing data to port
Error at OPEN (Directory path) with operating system error msg.:No such file or directory.
The missed data from the error idocs have been sent via PFAL.
But again after this one hour the idocs were successfully posted for the same directory path.
Please let me know what the issue can be here or how can we avoid this.
Thanks.Hi
*Some times it may happen that IDOC doesnt reach to the port , in case if you are using Transactional RFC port so*
*you can use the report RSEOUT00 for sending the IDOC to port .*
*Hope it may help you .* -
Error in Production Load: Error passing data to port
Hello All,
I got this unexpected error in production. The Jobs are still processing for a long time(in Yellow status) with the error message :
Extraction (messages): Missing messages (Status:Yellow)
Missing message: Request received (Status:Yellow)
Missing message: Number of records sent (Status:Yellow)
Missing message: Selection Completed (Status:Yellow)
Transfer (IDocs and TRFC): Missing messages or warnings (Status:Yellow)
Request IDoc : Application document posted (Status:Green)
Info IDoc 2 : sent, not arrived ; Error passing data to port (Status:Yellow)
Info IDoc 3 : sent, not arrived ; Error passing data to port (Status:Yellow)
Info IDoc 1 : sent, not arrived ; Error passing data to port (Status:Yellow)
I went through the below forumn, and asked the basis to look in to it. In the meantime can any one please suggest me any solutions.
Some problem with IDoc's Settings while loading dataHi Ram,
The problem may be with the connection to the source system you are loading the data from. You can check the connection using the note 140276.
Best Regards,
Des. -
IDoc Status 02 Error passing data to port
Hi Experts,
I wrote a custome program to send customer via HTTP XML port. This program collects customer and send in single IDoc as per specified batch size.eg if batch size is 5 then 5 custome will be send in one IDoc. On devlopment environment it was working fine upto batch size 500. In quality single customer is transfering successfully but while selecting a batch size arround 100 it is displaying error 'Error passing data to port' with status 02.
Please help me to be out of this.
Regards,
Ravinderstatus 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari -
Hello,
I use extractor 1_CO_PA1100V04.
I see that data are uploaded. Diagnosis - current process not finished :
Number of records like that
15.42:10 (68888 from 0 records)
Errors in details :
sent, not arrived; Error passing data to port
Selected number dores not agree with transferred number
What is the problem? What is solution for that problem?
AHi Aleksandrs,
there must be an error logged somewhere. Please check out the weblog /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks for analyzing the issue.
regards
Siggi -
Error when transferring data; communication error when analyzing
Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varunok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun -
RFC error when sending logon data
Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.* Start profile START_DVEBMGS00_erptest *
#.* Version = 000006 *
#.* Generated by user = BASIS *
#.* Generated on = 30.12.2010 , 15:40:55 *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created by: BASIS 24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created by: BASIS 24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created by: BASIS 24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created by: BASIS 24.12.2007 23:53:27
MS = msgserver.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created by: BASIS 24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created by: BASIS 25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created by: BASIS 25.03.2004 08:37:47
#old_value: 3 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created by: BASIS 16.06.2007 17:35:41
#old_value: 2
#changed: BASIS 14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created by: BASIS 10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value: changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000 changed: BASIS 20.04.2005 17:17:01
#old_value: 0 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000 changed: BASIS 28.03.2005 23:17:11
#old_value: 2 changed: BASIS 29.03.2005 12:09:14
#old_value: 0 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created by: SAP* 08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created by: ALPER 13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created by: BASIS 27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created by: BASIS 30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created by: BASIS 30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created by: BASIS 30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created by: BASIS 18.05.2005 09:20:25
#old_value: 90 changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created by: BASIS 20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS 03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created by: BASIS 20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS 03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created by: BASIS 08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS 30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS 03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created by: BASIS 08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created by: BASIS 08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created by: BASIS 08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created by: BASIS 08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS 03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created by: BASIS 08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created by: BASIS 08.07.2003 20:34:46
#old_value: 5000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created by: BASIS 08.07.2003 20:33:56
#note 103747
#old_value: 10607 changed: BASIS 08.07.2003 20:34:58
#old_value: 10000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created by: BASIS 08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076 changed: BASIS 28.06.2005 19:36:21
#old_value: 5735 changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan -
Active failed. Communication error when performing integrations.
I actived an activity but the request failed. In the request log,the last rows indicated the reason,but I can't understand and don't know how to solve it. Below show the last rows of the log:
Change request state from SUCCEEDED to FAILED
Error! The following problem(s) occurred during request processing:
Error! Communication error when performing integrations. HTTP protocol error [reason: Parsing of the response body failed [reason: Comment must start with "<!--".]]. Request FAILED.
REQUEST PROCESSING finished at 2010-09-05 03:00:16.468 GMT and took 2 m 36 s 172 msI copied SCs' info from http://host:port/sap/monitoring/ComponentInfo below:
Software Components
Vendor Name Version Location Applied
sap.com WD-APPS 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227111730
sap.com WD-FLEX 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227114200
sap.com ENGINEAPI 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227104639
sap.com LM-MODEL-CE 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110643
sap.com LM-SLD 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111825
sap.com WD-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090714195600) SAP AG 20100227112212
sap.com WD-ADOBE 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227110000
sap.com EP-MODELING 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227113917
sap.com J2EE-FRMW 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227110242
sap.com ENGFACADE 7.11 SP3 (1000.7.11.3.0.20090707223600) SAP AG 20100227111458
sap.com ESREG-BASIC 7.11 SP3 (1000.7.11.3.1.20090819222300) SAP AG 20100227110634
sap.com CAF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227114351
sap.com ESF 7.11 SP3 (1000.7.11.3.0.20090716184100) SAP AG 20100227111734
sap.com CORE-TOOLS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112432
sap.com EP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112608
sap.com APP-LIB 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227105136
sap.com MOIN_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105811
sap.com LMNWABASICMBEAN 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112135
sap.com ESCONF_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227110749
sap.com VCFRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227111401
sap.com LMINTERNALAGENT 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110251
sap.com APP-LIB-BASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com ESI-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112458
sap.com WDEXTENSIONS 7.11 SP3 (1000.7.11.3.0.20090708083400) SAP AG 20100227114257
sap.com LMNWACDP 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112218
sap.com EP-CONNECTIVITY 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112502
sap.com LMNWAUIFRMRK 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com SERVERCORE 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110257
sap.com CE-RA-EDM 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227110932
sap.com EP-BASIS-API 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112504
sap.com ESMP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110214
sap.com ESREG-SERVICES 7.11 SP3 (1000.7.11.3.2.20091001033900) SAP AG 20100227112210
sap.com ESP_FRAMEWORK 7.11 SP3 (1000.7.11.3.2.20090914172400) SAP AG 20100227112151
sap.com VCKITBI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227113947
sap.com BI_UDI 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114349
sap.com VCFREESTYLEKIT 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227114146
sap.com EP-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090715192600) SAP AG 20100227114235
sap.com BI-BASE-S 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227114355
sap.com JSPM 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110220
sap.com UDDI 7.11 SP3 (1000.7.11.3.1.20090928214200) SAP AG 20100227110233
sap.com WSRM 7.11 SP3 (1000.7.11.3.0.20090708051400) SAP AG 20100227110903
sap.com UMEADMIN 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com SAP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112125
sap.com VTP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104841
sap.com J2EE-APPS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112629
sap.com MESSAGING 7.11 SP3 (1000.7.11.3.3.20090909003900) SAP AG 20100227114300
sap.com FRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090721210500) SAP AG 20100227114152
sap.com LMNWATOOLS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com CAF-MF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227111731
sap.com CAF-UI 7.11 SP3 (1000.7.11.3.0.20090708093200) SAP AG 20100227112401
sap.com SAPNWDEMO 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com MMR_SERVER 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114353
sap.com DI_CLIENTS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112503
sap.com UWLJWF 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227113931
sap.com VCBASE 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227112627
sap.com BI-WDALV 7.11 SP3 (1000.7.11.3.0.20090715032600) SAP AG 20100227111328
sap.com BI-WDEXT 7.11 SP3 (1000.7.11.3.0.20090708083300) SAP AG 20100227114258
sap.com SOAMONBASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com EP-ADMIN 7.11 SP3 (1000.7.11.3.0.20090726162100) SAP AG 20100227114239
sap.com EP-BASIS 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112829
sap.com LMNWABASICAPPS 7.11 SP3 (1000.7.11.3.0.20090727232800) SAP AG 20100227114323
sap.com LMNWABASICCOMP 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112449
sap.com LMCFG 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112609
sap.com LMCTC 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114321
sap.com NWTEC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112331
sap.com SR-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112359
sap.com BASETABLES 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112423
sap.com CFG_ZA_CE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227105952
sap.com LM-CORE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227111845
sap.com DI_CBS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111119
sap.com BRMS-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104935
sap.com XI_CNT_SAP_BASIS 7.11 SP1 (1000.7.11.1.0.20081108235600) SAP AG 20100226194653
sap.com BRMS-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105857
sap.com BPEM-CONTENT 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227111116
sap.com ADSSAP 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104529
sap.com BPEM-PP 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227110939
sap.com BPEM-HIM 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110948
sap.com DI_DTR 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110723
sap.com BPEM-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112433
sap.com BPEM-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227111735
sap.com SAP_XIGUI 7.11 SP3 (1000.7.11.3.2.20090819222300) SAP AG 20100227111517
sap.com SAP_XIESR 7.11 SP3 (1000.7.11.3.3.20091001183900) SAP AG 20100227111819
sap.com SERVICE-COMP 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112210
sap.com BPEM-WDUI 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112404
sap.com GP-VC 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112422
sap.com GP-PP 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227113936
sap.com GP-CORE 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112606
sap.com DI_CMS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114059
sap.com BPEM-MON 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112502
sap.com VOICERT 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227111455
sap.com BRMS-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227114147
sap.com IDEUPDSITECE 7.11 SP3 (1000.7.11.3.0.20090708112000) SAP AG 20100227104951
sap.com BPEM-FLEXUI 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104710
sap.com BPEM-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104645
sap.com VOICEVC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104733
sap.com IDEUPDSITETOOLS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112428
test.sap.com HM-WDUIDMKTSCNR 7.11 SP0 (1000.7.11.0.0.1268322642085) Local Workplace 20100324083612
test.sap.com HM-WDUIDMKTCNT 7.11 SP0 (1000.7.11.0.0.1268322933427) Local Workplace 20100324083656
test.sap.com HM-WDUIDMKTCORE 7.11 SP0 (1000.7.11.0.0.1268322880287) Local Workplace 20100324083659 -
RFC Communication error when doing initial indexing
Hello Everyone,
I have a quick question, when doing the initial index rollup for a BIA index the job is failing with RFC communication error.
We currently have the setting related to " TREXRfcServer threads" set to "Automatic Changes" in order to avoid the RFC Communication errors when loading big loads in BI system.
We currently are on Revision 49.
I also have referred to OSS Note 1138603.
The issue is when I am rolling up the BIA Index the rollup job is failing with RFC Communication errors.
The Global parameters within BIA are:
BATCHPARA - 2
NUMPROC - 5
PKGSIZE - 10000000
SUBPKGSIZE - 20000
We have two app servers with 52 Dialog processes and 25 Background processes.
Any help would be really appreciated.
Thanks
Dharma.Removing references to systems and ports
Issue:
When the initial indexing is being carried out for an InfoCube to
create the BIA Index and there is more than one application server in
the system the job is failing with the http error.
Hello Everyone,
Thanks for the input, after the automatic changes was configured for concurrent requests the error is different right now.
The error message is,
"Remote communication failure with partner http://<Removed>:<removed>/indexCellTable"
Overview/Background:
When the indexing job is triggered as a background job the failure happens when the S table index is being filled.
In our system where we are trying to do the stress testing we currently have two app servers and one central instance.
When I limit the RFCGROUP in RSDDTREXADMIN table to one App server in terms of logon group the job finishes fine.
Whereas, when I do not limit the RFCGROUP and all app servers are open for access the background job finishes with the error message
Remote communication failure with partner http://<Removed>:<removed>/indexCellTable.
We have looked into the OSS Note 1102652 and our BASIS team confirmed that they were able to ping from BI App servers into BIA blades and vice versa.
We also confirmed if the local gateway was used for connectivity.
The above issue was not in other systems where we only had one server.
We currently are at Revision 49 and SP 13 in BI.
We have E5345 Clowertown blades (2 x 4) 16GB blades.
Please let us know if you need additional information.
Thanks in advance for the input.
Dharma.
Edited by: Arun Varadarajan on Apr 24, 2009 1:36 AM -
Error when sending data request
Hi All,
i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from ecc 6.0 . all of this schedule's showing the status "error when sending data request" with the following details.
status
diagnosis
the request idoc could not be sent to the source system using rfc
system response
there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
in step by step analysis it is showing
rfc to source system successful showing with ash status
data selection successfully stated and finished ? show with red status
in that details tab
request : showing with green status
everything ok
extraction :showing with red status
missing messages
transfer(idocs and trfc) : missing messeges
processing(data packet) : no data
it is showing technical status with red as processing overdue
processing step call to source system
so it is showing error with 0 from 0 records.
please any body could help me for solving this error.
regards,
naveen.Hi
Seems you have connectivity issues between the Source system and Bi system.
You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
Much of BASIS Issue .
Hope it helps and clear -
Error when sending message: 500 Internal Server Error
Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
NisarI think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar -
Error when sending message: 500 Timeout
while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini
Maybe you are looking for
-
TS1394 Problem installing Snow Leopard
I am running OS 10.4.11 on My Intel Macbook. I bought the 10.6.3 installation CD to upgrade. When I put it in the drive, it whirrs around for a few minutes, then ejects without showing up on my screen. What is happening? Why won't it install. I have
-
Dear Experts, I have a info package which has been included in the process chain. It scheduled everyday. Now somebody changed some settings in InfoPackage like data selection and processing tabs.How do i know that who has changed the settings. If i
-
Hello Ever since installing OSX 10.9.2, I have been getting the continuous beachball when resetting safari (v 7.0.2) and having to force quit the app. I've tried deleting caches and .plists as referred to in other related threads but these have not h
-
ORA-00932 when trying to pass ARRAY from Java SP to PL/SQL
Hi all I am trying to pass ARRAYs back and forth between PL/SQL and Java stored procedures. But I keep getting: ORA-00932: inconsistent datatypes: expected a return value that is an instance of a user defined Java class convertible to an Oracle type
-
IPhone 5C wont play on dock with 30 pin adaptor
I have just upgraded to an iPhone 5C. I recently bought myself a clock radio which is iPod/iPhone compatible with 30 pin. Now that I have a 5C, I have bought an adaptor but my music will not play through the dock. Can anyone help me with this? I set