Error while adding new function to HRMS fast formula

Hi,
when i m trying to add a new external function to BG_ABSENCE_DURATION formula, it is getting verified successfully. But when i m trying to save it, it is giving error as below:
APP-FF-33980: Internal error.
A compilation error has been detected while attempting to generate package FFP294_01011900
Please consult your system administrator.
I have compliled the package successfully using TOAD and registered the function using Define Function form. Please help me to resolve this problem.

Usually this error occurs when the called function has not been properly defined. You say you have defined it, but check that the parameters are the same in the FF call to the function and the function itself.
If that is OK, I would then create a new FF with all the same code and try to save that
Finally, if all else fails, check MetaLink as thee are a few references to other problems in this area which require patches to solve them.
Regards
Tim

Similar Messages

Error while adding new OVM in server pool

Hi,
I have to add a new OVM server to the existing server pool.
while doing test connecting at the time of adding server in server pool, it is contacting. however, it is showing error with " check the agent connectivity" while clicking OK.
ovs agent server is running.
can any one assit me on this

Hi,
Did the subscriber database used for replication before?
Check the MSDistribution_history table in the distribution database. It contains history rows for the Distribution Agents.
In case you encounter the “One or more subscriptions have been marked inactive. Drop and re-create all subscriptions for this node that are failing with this error.” in the Replication Monitor after restarting the Distribution
Agent.
This means that the Distribution Agent is unable to delivery data due to some errors or the job was stopped and the Agent will go into an infinite retry logic.
The Agent will stay in retry mode until the Distribution Cleanup job removes the “cached” transactions from the Distribution Database. At this point the Distribution Agent will no longer have the data needed to “catch
up” the subscriber. As result, the Subscriber will be marked “inactive” and post the following error in the MSrepl_errors table in the Distribution database.
Subscription Expiration and Deactivation
http://technet.microsoft.com/en-us/library/ms151188.aspx
Thanks.
Tracy Cai
TechNet Community Support

Error while adding new security group in content server

Hi,
When i am trying to add new security group in UCM using User Admin applet i am getting following error:
Event generated by user 'weblogic' at host 'vpunvfpctnsz-07.ad.infosys.com:16200'. Unable to execute service ADD_GROUP and function insertGroupRow.
Unable to execute query 'IroleDefinition(INSERT INTO RoleDefinition (dGroupName, dRoleName, dPrivilege, dRoleDisplayName)
values ('Test_111', 'admin', 0, ''))'. ORA-00001: unique constraint (DEV_OCS.PK_ROLEDEFINITION) violated
java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OCS.PK_ROLEDEFINITION) violated. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,weblogic,vpunvfpctnsz-07.ad.infosys.com:16200!$!csServiceDataException,ADD_GROUP,insertGroupRow!$!csDbUnableToExecuteQuery,IroleDefinition(INSERT INTO RoleDefinition (dGroupName\, dRoleName\, dPrivilege\, dRoleDisplayName)<br> values ('Test_111'\, 'admin'\, 0\, ''))!$ORA-00001: unique constraint (DEV_OCS.PK_ROLEDEFINITION) violated<br>!syJavaExceptionWrapper,java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OCS.PK_ROLEDEFINITION) violated<br>
intradoc.common.ServiceException: !csServiceDataException,ADD_GROUP,insertGroupRow!$
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2071)
at intradoc.server.Service.buildServiceException(Service.java:2207)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2201)
at intradoc.server.Service.createServiceException(Service.java:2196)
at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1736)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1691)
at intradoc.server.Service.doAction(Service.java:476)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1439)
at intradoc.server.Service.doActions(Service.java:471)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1371)
at intradoc.server.Service.executeActions(Service.java:457)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:723)
at intradoc.server.Service.doRequest(Service.java:1865)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1332)
at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1678)
at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:221)
at sun.reflect.GeneratedMethodAccessor120.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1592)
at idcservlet.IdcFilter.doFilter(IdcFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: intradoc.data.DataException: !csDbUnableToExecuteQuery,IroleDefinition(INSERT INTO RoleDefinition (dGroupName\, dRoleName\, dPrivilege\, dRoleDisplayName)
* values ('Test_111'\, 'admin'\, 0\, ''))!$ORA-00001: unique constraint (DEV_OCS.PK_ROLEDEFINITION) violated* at intradoc.jdbc.JdbcWorkspace.handleSQLException(JdbcWorkspace.java:2441)
at intradoc.jdbc.JdbcWorkspace.execute(JdbcWorkspace.java:584)
at intradoc.server.UserService.insertGroupRow(UserService.java:1201)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:549)
at intradoc.server.Service.doCode(Service.java:504)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1622)
... 39 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OCS.PK_ROLEDEFINITION) violated
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:89)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:193)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1028)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1379)
at oracle.jdbc.driver.OracleStatement.doScrollExecuteCommon(OracleStatement.java:5846)
at oracle.jdbc.driver.OracleStatement.doScrollStmtExecuteQuery(OracleStatement.java:5989)
at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:2012)
at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1958)
at oracle.jdbc.driver.OracleStatementWrapper.executeUpdate(OracleStatementWrapper.java:301)
at weblogic.jdbc.wrapper.Statement.executeUpdate(Statement.java:503)
at intradoc.jdbc.JdbcWorkspace.execute(JdbcWorkspace.java:564)
... 50 more
I checked in database , the security group Test_111 is not present in ROLEDEFINITION table.
What could be the issue?
Regards,
Minal

1) Try importing CMU bundle with 'Overwrite Duplicates' option unchecked .
2) In the CMU bundle, open file roles_guest.hda and see if 'guest' role has access to any group that start with special character or group you haven't created in the system..
Eg: guest
#AppsGroup
0
Also open securitygroups folder in CMU bundle, and see if you can find any groups that starts with special character or group you haven't created in the system.
3) Identify that group and execute below query in the UCM database.
select * from roledefinition where dgroupname= '#AppsGroup';
Replace '#AppsGroup' with the groupname you identified.
4) Solution would be to delete all the rows with dgroupname= '#AppsGroup' from the 'roledefinition' table.
delete from roledefinition where dgroupname= '#AppsGroup';
Replace '#AppsGroup' with the groupname you identified.

EEWB Enhancement Error while adding new field

Hello Experts ,
The requirement is to add the attachment feild in the support desk message screen (CRMD_ORDER) in the Fast track tab , although in the transaction tab already the document option is available for attachments the end user's want it in intial screen.
I have tried this using EASY ENHANCEMENT WORKBENCH - EEWB as per the suggestions given by experts in SDN,now i face a problem in EEWB .
I have created a object and extention in EEWB under a project,the it took me to the wizard automatically ,i followed up the notes in wizard to ADD_NEW_FIELDS and after it is completed, it shows a ERROR message as "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems." What does this Error Mean?Should i have to follow any system settings for this?
Note : I have made the system settings in EEWC -System Data Maintenence before enhancement.
Has any one worked with EEWB to ADD new fields,if so then please give me a solution to solve this problem.
Thanks & Regards,
Mohana Priya

Hi Priya,
We are also facing similar error in EEWB. If you have solved this problem, please update thread.
Thanks
Dhanraj

Error while adding new field in the Segment type thru WE31.

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 45B. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
Points will be rewarded
regards,
neslin.

Hi
You can create a new version. This will not create any problems. You might not be able to cancel the release because of upgrade.
Thanks
Vijay

Error while adding new record

I have created an user defined table for storing city details.When I add record in it,it returns -4002 and the record is not saved.The code is as follows ,
Private Sub AddCity()
        Dim objCity As SAPbobsCOM.UserTable
        Dim intCode As Integer
        Dim txtCity As SAPbouiCOM.EditText
        Dim lngStatus As Long
        Dim btnSave As SAPbouiCOM.Button
        Try
            objCity = objCompany.UserTables.Item("U_City")
            intCode = GetPK("[@U_City]", "New")
            txtCity = objForm.Items.Item("txtCity").Specific
            objCity.Code = intCode
            objCity.Name = intCode
            objCity.UserFields.Fields.Item("U_City_Code").Value = intCode
            objCity.UserFields.Fields.Item("U_City_Name").Value = txtCity.Value.Trim
            objCity.UserFields.Fields.Item("U_Active").Value = "Y"
            lngStatus = objCity.Add()
            If lngStatus = 0 Then
                SBO_Application.StatusBar.SetText("Operation Completed Successfully", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                btnSave = SBO_Application.Forms.ActiveForm.Items.Item("btnSave").Specific
                btnSave.Caption = "OK"
            End If
        Catch ex As Exception
            SBO_Application.MessageBox("Tour Reporter:AddCity()=" & ex.Message)
        End Try
    End Sub
The function GetPK returns primary key of the table.

Hello
It it is an UDO, not a UDT, you may use GeneralService to insert record into the table, ot build and UDO type form to get binded automatically.
You may use a similar code to save an data to UDO table
Dim oGeneralService As SAPbobsCOM.GeneralService
Dim oGeneralData As SAPbobsCOM.GeneralData
Dim oGeneralParams As SAPbobsCOM.GeneralDataParams
Dim sCmp As SAPbobsCOM.CompanyService = oCompany.GetCompanyService
oGeneralService = sCmp.GetGeneralService("U_City")
oGeneralData = oGeneralService.GetDataInterface(GeneralServiceDataInterfaces.gsGeneralData)
SQL = "select AutoKey from ONNM where ObjectCode = 'U_City'"
oRs.DoQuery(SQL)
oGeneralData.SetProperty("Code", oRs.Fields.Item(0).Value.ToString())
oGeneralData.SetProperty("U_COL1", COL1Data)
oGeneralService.Add(oGeneralData)
Return True
This code inserts records into UDO master Data type object, called U_City
You may clone the rows                 oGeneralData.SetProperty("U_COL1", COL1Data) and replace "U_COL1" with the UDF name inside, and "COL1Data" with the data of the field
Edited by: János Nagy on Jun 23, 2011 12:16 PM - removed the matrix elements,

Transport error while adding new Navigational Attr to InfoCube on BIA

Hi Gurus,
I have added a new field in the Profit Center Master data(0PROFIT_CTR_ATTR) in R/3 and the changes seem to be working fine in BW. This 0PROFIT_CTR is present in one of the InfoCubes that we have on the BIA. I have turned 'ON' the newly added Navigational Attribute in the InfoCube and have saved the changes. Now when I try to transport these changes to the QA for testing, the transport is getting cancelled with the message 'NOT CORRECT USAGE' in rsddtrex.
I am wondering if this is because I have added and turned'ON' a new Navigational attribute in the InfoCube under the BIA.Maybe the BIA index and the the InfoCube structure do not match because of this newly added Nav Attr in the InfoCube?
Do you have any suggestions on this. I was under the impresiion that even if this was the case, the transports should succeed and only the rollup to the BIA process should fail in the BIA rather than the transports to QA.
Any suggestions?
Thanks
Arvind

Hi.
Did you check if note 1223284 was applied in yor system ?
1223284 - BIA index set to inactive 'A' after InfoCube activation.
Thanks,
Walter Oliveira.

Error While Creating New Field thru EEWB

Hello CRM Experts,
I have found following Error while adding New Fields through EEWB. Can any one help to analyse and give the solution?
It gives Error Log as- System type OLTP with role DEV is not specified correctly. System type OLTP with role DEV is not specified correctly
Thanks for your reply in advance.

Hi Priya,
We are also facing similar error in EEWB. If you have solved this problem, please update thread.
Thanks
Dhanraj

Warning while adding new ECC

Hi ,
I am getting error while adding new ECC variable in ICM. PFB the error message.
" The Maximum size of all Expanded Call Variable in the Computer Telephony Integeration Server is 2500 bytes. Saving these schanges would require 2795 bytes.
will this hamper the performance of the system..?

Hi, no, it will not work at all, so no worries about system performance.
Why are you adding a new ECC variable when the system tells you it wont fit?
G.
Sent from Cisco Technical Support Android App

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing.

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing the existing. This is irritting.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Error while adding a record

I am getting the following error while adding record into the table CM_RECIPE_ITEM :
<h4> Error </h4>
ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
Error Unable to process row of table CM_RECIPE_ITEM.
Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.
Thanking You,
Yogesh
<h4> CM_RECIPE_ITEM Table </h4>
CRI_ID------CRI_CR_ID--------CRI_BOM_CODE--------CRI_CIFG_CODE---------CRI_CIRM_CODE--------CRI_SEQ--------CRI_QTY--------CRI_RM_COST
625----------464-----------------PRODUCT3001----------FG003----------------------10---------------------------1-------------------60-----------------10
626----------464-----------------PRODUCT3001----------FG003----------------------12---------------------------2-------------------40------------------10
<h4>Global temporary table</h4>
DROP TABLE COSTMAN.INTERIM CASCADE CONSTRAINTS;
CREATE GLOBAL TEMPORARY TABLE COSTMAN.INTERIM
ROW_ID ROWID
ON COMMIT PRESERVE ROWS
NOCACHE;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3"
BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
BEGIN
INSERT INTO interim VALUES (:new.rowid);
END;
<h4>Trigger to update data on CM_RECIPE table </h4>
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3_AFTER"
AFTER INSERT OR UPDATE ON "CM_RECIPE_ITEM"
BEGIN
FOR ds IN (SELECT row_id FROM interim) LOOP
UPDATE CM_RECIPE
SET CR_RMC = (
SELECT SUM(CRI_QTY * CRI_RM_COST)/SUM(CR_QUANTITY)
FROM CM_RECIPE_ITEM
WHERE CRI_BOM_CODE = CR_BOM_CODE
AND rowid = ds.row_id
UPDATE CM_RECIPE
SET CR_TOTAL_COST = (
SELECT CIFG_PACKING + CIFG_OVERHEAD +CIFG_OTHERS
FROM CM_ITEM_FG
WHERE CIFG_CODE = CR_CIFG_CODE
AND rowid = ds.row_id
) + CR_RMC;
UPDATE CM_RECIPE
SET CR_GROSS_MARGIN =
(SELECT CIFG_DP_RATE
FROM CM_ITEM_FG
WHERE CIFG_CODE = CR_CIFG_CODE
AND rowid = ds.row_id) - CR_TOTAL_COST) / CR_TOTAL_COST;
END LOOP;
END;
/

The scripts of the tables CM_ITEM_FG, CM_RECIPE, CM_RECIPE_ITEM are as follows :
<h4>CM_ITEM_FG</h4>
ALTER TABLE COSTMAN.CM_ITEM_FG
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_ITEM_FG CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_ITEM_FG
CIFG_CODE VARCHAR2(13 BYTE) NOT NULL,
CIFG_CCG_ID NUMBER NOT NULL,
CIFG_NAME VARCHAR2(50 BYTE) NOT NULL,
CIFG_PACKING NUMBER NOT NULL,
CIFG_OVERHEAD NUMBER NOT NULL,
CIFG_OTHERS NUMBER NOT NULL,
CIFG_DP_RATE NUMBER NOT NULL,
CIFG_CR_BY VARCHAR2(32 BYTE),
CIFG_CR_ON DATE,
CIFG_UPD_BY VARCHAR2(32 BYTE),
CIFG_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_PK_001 ON COSTMAN.CM_ITEM_FG
(CIFG_CODE, CIFG_CCG_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_UK_001 ON COSTMAN.CM_ITEM_FG
(CIFG_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_ITEM_FG_T1"
BEFORE UPDATE ON "CM_ITEM_FG"
FOR EACH ROW
BEGIN
BEGIN
UPDATE CM_RECIPE
SET CR_TOTAL_COST = (CR_RMC + :NEW.CIFG_PACKING + :NEW.CIFG_OVERHEAD + :NEW.CIFG_OTHERS);
END;
BEGIN
UPDATE CM_RECIPE
SET CR_GROSS_MARGIN = (:NEW.CIFG_DP_RATE - CR_TOTAL_COST) / CR_TOTAL_COST;
END;
END;
ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
CONSTRAINT CM_ITEM_FG_PK_001
PRIMARY KEY
(CIFG_CODE, CIFG_CCG_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
CONSTRAINT CM_ITEM_FG_UK_001
UNIQUE (CIFG_CODE)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
CONSTRAINT CM_ITEM_FG_FK_001
FOREIGN KEY (CIFG_CCG_ID)
REFERENCES COSTMAN.CM_COST_GROUP (CCG_ID));
<h4>CM_RECIPE</H4>
ALTER TABLE COSTMAN.CM_RECIPE
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_RECIPE CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_RECIPE
CR_ID NUMBER NOT NULL,
CR_CCG_ID NUMBER,
CR_EFF_FROM DATE,
CR_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
CR_BOM_CODE VARCHAR2(50 BYTE),
CR_QUANTITY NUMBER,
CR_RMC NUMBER,
CR_TOTAL_COST NUMBER,
CR_GROSS_MARGIN NUMBER,
CR_CR_BY VARCHAR2(32 BYTE),
CR_CR_ON DATE,
CR_UPD_BY VARCHAR2(32 BYTE),
CR_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_PK_001 ON COSTMAN.CM_RECIPE
(CR_CCG_ID, CR_ID, CR_CIFG_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_001 ON COSTMAN.CM_RECIPE
(CR_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_002 ON COSTMAN.CM_RECIPE
(CR_BOM_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_T1"
BEFORE INSERT ON "CM_RECIPE"
FOR EACH ROW
DECLARE
L_ID NUMBER;
BEGIN
IF INSERTING THEN
IF :NEW.CR_ID IS NULL THEN
--SELECT CM_RECIPE_SEQ.NEXTVAL INTO L_ID FROM DUAL;
:NEW.CR_ID := CM_RECIPE_SEQ.NEXTVAL; --L_ID;
END IF;
:NEW.CR_CR_ON := SYSDATE;
:NEW.CR_CR_BY := nvl(v('APP_USER'),USER);
END IF;
IF UPDATING THEN
:NEW.CR_UPD_ON := SYSDATE;
:NEW.CR_UPD_BY := nvl(v('APP_USER'),USER);
END IF;
END;
ALTER TABLE COSTMAN.CM_RECIPE ADD (
CHECK ("CR_EFF_FROM" IS NOT NULL) DISABLE,
CHECK ("CR_CCG_ID" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CONSTRAINT CM_RECIPE_PK_001
PRIMARY KEY
(CR_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
CONSTRAINT CM_RECIPE_UK_002
UNIQUE (CR_BOM_CODE)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
<h4>CM_RECIPE_ITEM</H4>
ALTER TABLE COSTMAN.CM_RECIPE_ITEM
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_RECIPE_ITEM CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_RECIPE_ITEM
CRI_ID NUMBER NOT NULL,
CRI_CR_ID NUMBER NOT NULL,
CRI_BOM_CODE VARCHAR2(50 BYTE) NOT NULL,
CRI_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
CRI_CIRM_CODE VARCHAR2(10 BYTE) NOT NULL,
CRI_SEQ NUMBER,
CRI_QTY NUMBER,
CRI_RM_COST NUMBER,
CRI_CR_BY VARCHAR2(32 BYTE),
CRI_CR_ON DATE,
CRI_UPD_BY VARCHAR2(32 BYTE),
CRI_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_ITEM_PK_001 ON COSTMAN.CM_RECIPE_ITEM
(CRI_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T2"
BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM"
FOR EACH ROW
BEGIN
IF :NEW.CRI_CR_ID IS NULL THEN
SELECT CR_ID INTO :NEW.CRI_CR_ID
FROM CM_RECIPE
WHERE CR_BOM_CODE = :NEW.CRI_BOM_CODE;
END IF;
END;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T1" BEFORE
INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
DECLARE
L_ID NUMBER;
SEQ NUMBER;
BEGIN
IF INSERTING THEN
IF :NEW.CRI_ID IS NULL THEN
SELECT CM_RECIPE_ITEM_SEQ.NEXTVAL
INTO :NEW.CRI_ID
FROM dual;
END IF;
:NEW.CRI_CR_ON := SYSDATE;
:NEW.CRI_CR_BY := NVL(v('APP_USER'),USER);
SELECT (NVL(MAX(CRI_SEQ),0)+1)
INTO SEQ
FROM CM_RECIPE_ITEM
WHERE CRI_BOM_CODE = :NEW.CRI_BOM_CODE;
:NEW.CRI_SEQ := SEQ;
END IF;
IF UPDATING THEN
:NEW.CRI_UPD_ON := SYSDATE;
:NEW.CRI_UPD_BY := NVL(v('APP_USER'),USER);
END IF;
END;
ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
CHECK ("CRI_RM_COST" IS NOT NULL) DISABLE,
CHECK ("CRI_QTY" IS NOT NULL) DISABLE,
CHECK ("CRI_SEQ" IS NOT NULL) DISABLE,
CONSTRAINT CM_RECIPE_ITEM_PK_001
PRIMARY KEY
(CRI_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
CONSTRAINT CM_RECIPE_FK_002
FOREIGN KEY (CRI_CIRM_CODE)
REFERENCES COSTMAN.CM_ITEM_RM (CIRM_CODE),
CONSTRAINT CM_RECIPE_ITEM_FK_001
FOREIGN KEY (CRI_CR_ID)
REFERENCES COSTMAN.CM_RECIPE (CR_ID));
Yogesh

Error while adding a job to scheduler

Hello,
I have a batch job that is running fine in both DEV and QA environment. In DEV, I am able to schedule and run it daily. I created a similar schedule in QA environment using BODS Mgmt Console/Administrator. However, upon Activating the schedule, I am getting the following error message. Would someone know why would this error be thrown and steps to troubleshoot this error?
Thanks.
[Repository:AECON_DW_REPOSITORY Schedule:Daily_Run_QA Error:Error while adding a job to scheduler]
When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.

Hi Rizwan Tahir ,
Delete the job server associated with the current batch job and recreate it.
Then try creating a new schedule using the new job server.
And take care that job server is created in QA environment.
Hope this should work.
Regards,

Error while adding Image: ORA-00001: unique constraint

Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AM

Hi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators.

How to create new subsite while adding new item to the list by using javascript?

hi,
I hav a task ie, when I add item to the list then subsite will create with that list item title and description . So By using javascript, I have to create subsite while adding new item to the list.
Help me to solve this.
Thank you,

Is your item getting added through Javascript client object model ? If yes, you can write in the success delegate of your list creation method the logic to create the subsite.
function CreateListItem()
var clientContext = new SP.ClientContext.get_current();
var oList = clientContext.get_web().get_lists().getByTitle('List Name');
var itemCreateInfo = new SP.ListItemCreationInformation();
this.oListItem = oList.addItem(itemCreateInfo);
oListItem.set_item('Title', 'My New Item!');
oListItem.set_item('Body', 'Hello World!');
oListItem.update();
clientContext.load(oListItem);
clientContext.executeQueryAsync(Function.createDelegate(this, this.CreateListItemOnSuccess), Function.createDelegate(this, this.onQueryFailed));
function CreateListItemOnSuccess() {
var subsiteTitle = oListItem.get_item('Title');
//Logic to create a subsite
function onQueryFailed(sender, args) {
I have added a sample flow for the above scenario. Have a look at the following lnk for how you can craete a subsite using ecmascript.
http://ravisoftltd.wordpress.com/2013/03/06/sharepoint-2010-create-site-with-ecma-script-with/
Geetanjali Arora | My blogs |

Error while adding new function to HRMS fast formula

Similar Messages

Maybe you are looking for