Error while checking in RSA3 for 0CRM_UT_SRV_CONT_I Datasource
Hiii,
I am trying to activate 0CRM_UT_SRV_CONT_I datasource.... but I am getting internal error :
Please find the error details :
Internal error in COM_PR_SET_REL_READ_SINGLE_PR*
Message no. COM_PRODUCT897**
Diagnosis
*An error was detected in program unit COM_PR_SET_REL_READ_SINGLE_PR. The program cannot continue running. The unit may be a function module, subroutine, class method, etc.
An unanticipated situation or error message that would normally not occur was detected in the program.
For example:
The program expects a variable to be filled with a value and this has not occurred.
A function module or method returns an unexpected exception.
You will find information below that can be used to analyze the situation:
Kindly provide me the steps to activate the CRM datasource and also the points which i should keep in mind before activating CRM datasource.
Thanks
Mayank
Hi ,
I Checked in BWA5, datasource is present there with check box ticked active.
Any other Ideas experts.
Thanks
Mayank
Similar Messages
-
Comm. error while checking accnt assignment for invoice 8000338378 in syste
Hi all,
Comm. error while checking accnt assignment for invoice (8000338378) in system .
But every thing is good.but we are geting error list above error
Reagrds,
SrikanthHi Praveen and all,
Thanks for your replies.
I tried doing setting with VKOA and checked with
VF02, Environment-Account determination analysis.
--> it says account determination is found.
Then i clicked the Flag button(Release to accounting) in VF02.
It gives below error in status bar
<b>"only output tax is allowed for account 175000 JTC1, E0 is not allowed"</b>
How to go ahead or solve this error.
suggest me please.
regards
Ambichan -
ERROR while checking standard program for SAP NOTE 175482(QM)
HI,
experts
i am implementing sap note 175842 QM MODULE .
My note is successfully implemented ,for that i created standard program RQEVAC50 USING ACCES KEY.
but in se38 report comes like this
REPORT RQEVAC50.
REPORT RQEVAC50 MESSAGE-ID QA.
so while checking error comes boz 2 report hedaing is there .
I WANT TO DELETE FIRST ONE BUT IT CANT.
I chose activate anyway but while releasing request it gives error.
THANKS
AJAY.hi
error is 'OBJECT REPS RQEVAC50 does not exit create it'**
I CREATED PROGRAM USING ACCESS KEY SO IT DOES NOT ALLOW ME TO CHANGE OR DELETE ANY LINE IN THE PROGRAM.
THATS THE MAIN PROBLEM.
Whwn i created a program RQEVAC50 it is totally blank but while implementing sap note the code comes in my progarm
so there are 2 report hedaing .
THANKS
AJAY. -
Hi
I'm extracting the data in R/3 system using tcode RSA3 for transaction datasource (2LIS_02_ITM). When i extracted the transaction data , it was giving time out error. Then i went into debug mode to find the error. While debugging the code it gave me a DBIF_RSQL_INVALID_CURSOR short dump.
NOTE : Data extraction is working for all 02 transaction data like 2LIS_02_SCL , 2LIS_02_S012. It s failing for only 2LIS_02_ITM only.
I have pasted the eror message below for reference. Urgent help required.
From
Bobby
ERROR MESSAGE DUMP for DBIF_RSQL_INVALID_CURSOR
Runtime Errors DBIF_RSQL_INVALID_CURSOR
Except. CX_SY_OPEN_SQL_DB
Date and Time 09.04.2008 12:47:09
Short text
Invalid interruption of a database selection.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLMCEX" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Unable to perform database selection fully.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
One of the database selections included a database Commit.
The selection was then supposed to continue. Before a
database commit, however, all outstanding database selections
must be concluded.
Possible causes in the application program:
While a read process from a database cursor is taking place
(within a loop SELECT/LOOP/EXEC SQL or before a FETCH command),
one of the following statements is used:
- MESSAGE (apart from MESSAGE S...)
- COMMIT WORK
- ROLLBACK WORK
- BREAK-POINT
- WAIT
- CALL FUNCTION ... DESTINATION (synchronous RFC)
- CALL FUNCTION ... STARTING NEW TASK
- RECEIVE RESULTS
- CALL DIALOG
- CALL SELECTION-SCREEN
- CALL TRANSACTION
- CALL SCREEN, or any other statement that results in the display of a
new screen
Whenever a program runs in debugging mode, a "COMMIT WORK" can
possibly be triggered during database selection. This abnormal
termination can also occur in debugging mode even with a correct
program.
A "COMMIT WORK" during debugging may be due to the following reasons:
1. A program or screen was regenerated during debugging
and updated in the database.
2. Each user needs a separate process in debugging mode, but
the number of available processes is restricted. If this
limit is exceeded, each debugging step then requires a
"COMMIT WORK".
The error occurs in a statement in which the table "MC02M_0ITMSETUP " is
accessed.
Missing RAISING Clause in Interface
Program SAPLMCEX
Include LMCEXU06
Row 1
Module type (FUNCTION)
Module Name MCEX_BW_LO_API
Trigger Location of Exception
Program SAPLMCEX
Include LMCEXU06
Row 220
Module type (FUNCTION)
Module Name MCEX_BW_LO_API
Source Code Extract
Line
SourceCde
190
at end of fieldnm. "PI 2000.2 SP_353722
191
if not <fs_field> in cond_select_tab.
192
cond_select = false.
193
refresh cond_select_tab. "PI 2000.2 SP_353722
194
exit.
195
endif.
196
refresh cond_select_tab. "PI 2000.2 SP_353722
197
endat. "PI 2000.2 SP_353722
198
endloop.
199
if cond_select eq true.
200
append &2 to e_t_data.
201
add 1 to counter.
202
endif.
203
endloop.
204
if s_maximum_size le counter.
205
exit.
206
endif.
207
else.
208
close cursor g_cursor.
209
s_flg_no_more_data = true.
210
exit.
211
endif.
212
enddo.
213
END-OF-DEFINITION.
214
end macro *****
215
216
CASE s_estruc.
217
extractstruc internal table setup table
218
*-- MM-PUR
219
sel 'MC02M_0HDR' mc02m_0hdr_tab mc02m_0hdrsetup.
>>>>>
sel 'MC02M_0ITM' mc02m_0itm_tab mc02m_0itmsetup.
221
sel 'MC02M_0SCL' mc02m_0scl_tab mc02m_0sclsetup.
222
sel 'MC02M_0SGR' mc02m_0sgr_tab mc02m_0sgrsetup.
223
sel 'MC02M_0SCN' mc02m_0scn_tab mc02m_0scnsetup.
224
sel 'MC02M_0CGR' mc02m_0cgr_tab mc02m_0cgrsetup.
225
sel 'MC02M_0ACC' mc02m_0acc_tab mc02m_0accsetup.
226
*-- Application '03' (Inventory Management)
227
sel 'MC03BF0' mc03bf0_tab mc03bf0setup.
228
sel 'MC03BX0' mc03bx0_tab mc03bx0setup.
229
sel 'MC03UM0' mc03um0_tab mc03um0setup.
230
*-- Application '04'
231
sel 'MC04P_0MAT' mc04p_0mat_tab mc04p_0matsetup.
232
sel 'MC04P_0ARB' mc04p_0arb_tab mc04p_0arbsetup.
233
sel 'MC04P_0COM' mc04p_0com_tab mc04p_0comsetup.
234
sel 'MC04PE0MAT' mc04pe0mat_tab mc04pe0matsetup.
235
sel 'MC04PE0ARB' mc04pe0arb_tab mc04pe0arbsetup.
236
sel 'MC04PE0COM' mc04pe0com_tab mc04pe0comsetup.
237
*-- Application '05' (Quality Management)
238
sel 'MC05Q1_0INSP' mc05q1_0insp_tab mc05q1_inspsetup.
239
sel 'MC05Q2_0INSP' mc05q2_0insp_tab mc05q2_inspsetup.Hi Bobby,
Did you already find a solution for this 'issue'?
I encounter the same problem. In my humble opinion this has nothing to do with the difference between structures.
When loading data in normal modus, there is no problem. When loading in debug, there is an error.
I also tested with other data sources and the same issue occurs there while nothing has changed.
If someone knows how to solve this issue, please reply.
Thanks!
Kind regards,
Bart -
Error while creating a task for creating an generic task /app/dac/CustomSQ
Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types -
Error while checking in and storing
Dear All
I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
Error while checking in and storing
Message no. 26253
What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
Regards
chandraDear Chandra,
please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
Best regards,
Christoph -
Error while generating CW kin for the new BG created for Taiwan
HiAll,
Please provide your help to resolve this issue,
Iam getting error while generating CW kin for the new BG created for Taiwan, China.
Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
Please let me know, is there any step missed to create CW kins for new BG's.
Thanks-
Sowmya.
Edited by: user13419037 on Jul 2, 2012 3:41 AMHello ,
Your solution can be solved by enabling the displayed check Box in Location Address DFF
Thanks
Bindu -
Error while Installing Oracle Services for Microsoft Transaction Server
I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
Error while releasing credit block for the order
Hi all,
I am getting follwing error while releasing credit block for the order in VKM1
Incorrect index structure for table IVBEP1
Text
Incorrect index structure for table IVBEP1
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your SAP R/3 System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error.
But we are not transfering any orders to CRM.The order can be only seen in R/3
Please assist
Regards
ManoHi
KIndly check the oss note 505876 in may help you
Regards
Damu -
Error while checking in and storing: C:\Documents and Settings
Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
I configured Content Repository, Content Category & Document Area in KPro.
I tried to test connection in OAC0, I am getting the message "Connection test for content repository XXXXXXXXXXXX was successful".
But when I tried to check in the docs in CV01N and while saving the DIR I am getting the error "Error while checking in and storing: C:\ ..... (Message no. 26253)".
Same time I can able to check in the docs to SAP DB.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Hello David,
I assume you’re using windows contentserver.
sounds like a problem with the parameter maxAllowedContentLength of ISS.
Default value would be 30 MB
Check the limit:
C:\windows\system32\inetsrv\appcmd list CONFIG -section:requestFiltering
Set limit to 4 GB:
c:\windows\system32\inetsrv\appcmd set config -section:requestFiltering -requestLimits.maxAllowedContentLength:4294967295
resatart ISS and try again.
Best Regards
Andreas -
Error while checking in and storing: C:Userscbt.abapDesktopLOP.XLS
Dear Friends,
I am trying to save the documnet in content server but getting the below error:
Error while checking in and storing: C:\Users\cbt.abap\Desktop\LOP.XLS
Message no. 26253
I hv checked CSADMIN certificate , is activated
In DC20 - i hv maintained data carrier type as PC for front end
and i hv all the authorizations, still I am getting this error
pl check and tell the steps to solve this issue.
regards,
Atul TulaskarHi Atul,
please see the information under http://wiki.sdn.sap.com/wiki/display/PLM/26253-Reasonforthiserror which should be useful to find out more about possible reasons for this error message.
Best regards,
Christoph -
Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S AnandError Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
PLM Integration AutoCAD 4.0
In AutoCAD Mechanical while Check in Drawing using KPro through CAD View I am encountering an error : "Error while checking in and storing C:\.........."
ACADM Log:
Command: _qsave Using configuration "SaveAsDialog" for document creation for
Drawing2.dwg.
Starting SAPGUI ...
Assigning file "C:\SapWorkDir\AcadM\SUKAN-TEST-7_DRW_000.dwg" to document
SUKAN-TEST-7/DRW/000/00.
Reading titleblock data for SUKAN-TEST-7/DRW/000/00...
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
Command:
Command: _SAPCADDESKTOP2
Command: Working without change number.
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
Reading titleblock data for SUKAN-TEST-7/DRW/000/00...
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
The same ACAD Drawing I am able to check in through SAP Transaction CV02N.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Sukan
Is the issue resolved.
Check in content repositories, just check if the repository which u tryin to Check In the document(CAD file) is giving u response..
i guess there must be some problem from server side.
just ask basis @ the same.
dont change config okk...
Niranjan -
Error while checking in and storing:Message no. 26253 - CV02N
Hi Friends
I have received the following error Error while checking in and storing:Message no. 26253 while check in of file in Content Server.
I have done all seeting such as Creation of content repository, Storage category.
Content server is also installed properly as per installation guide.
Is note SAP Note 1327343 applicable for me.
With Regards
Mangesh PandeChristoph Hopf
First thanks for the tip, my problem is that the Basis configured the server content in DMS because, will be used two servers.
I configured Data Carrier Sets / Sets date carrier type "server, front end".
Type (data carr.type) / Description / Path / CAD system / Online
80 / DMS Jundiai / Z_EMP_JD / 80 / X
I view an attached file in DMS normally, however when I make the check in Orig. the error occurs.
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 26729080"
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
" ;ODBC State 00000; Error Code 26729080"
An error occurred when calling module SCMS_DOC_CREATE_FILES
Message no. 1R579
Diagnosis
Exception number 6 occurred when function module SCMS_DOC_CREATE_FILES was called with document 00155D0216091ED1BE84D6471C796DB4.
Since ja thanks for the help
Márcio
Maybe you are looking for
-
Disable Html button in validation process using pl/sql
Hi, I need to disable a html page button. It gets re-enabled afer a validation process is run on the page and errors for the form are returned. I need a way of writing a validation process using pl/sql returning boolean, that can disable the button a
-
Just got my iPhone 5 & need to download my iPhone 3 info, then upload to new phone. When I log into iTunes, my husband's downloads show up. Why is his stuff showing up in my account?
-
Acrobat Reader and Acrobat Standard v9 compatibility
What is the lowest version of Acrobat Reader that can read Acrobat Standard 9 .pdf files?
-
Why is the new up grade killing mu battery
Why does the battery die faster with the new up grade
-
Oracle8i Installation Help Page
Just like the previous poster, I too have created my own page on installing 8i on linux, mainly focusing on redhat 6.0, but other details may apply to other distros. It aint complete yet, as I still have to finish the post-database creation page. htt