Error while choose inbound operation in action

Dear all,
if I create an action in a SWC I am not able to choose an inbound or outbound interface. For function module or
IDOC the dialog is opening without problems, but for Operation I get following error message:
====================================================================
= Root Exception ===================================================
====================================================================
Thrown:
com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
     at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.init(ExceptionDialog.java:126)
     at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.<init>(ExceptionDialog.java:98)
     at com.sap.aii.utilxi.swing.toolkit.IBMessages$1.run(IBMessages.java:318)
     at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:84)
     at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:67)
     at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:308)
     at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:298)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor$1.run(Guitilities.java:396)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:320)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 2
     at com.sap.aii.ibrep.gui.f4.composite.CompositeTableViewAccessor.mapAccessor2TreeModelParams(CompositeTableViewAccessor.java:418)
     at com.sap.aii.ibrep.gui.scenario.ps.PSInterfaceSearchHelp$PSCompositeViewAccessor.mapAccessor2TreeModelParams(PSInterfaceSearchHelp.java:103)
     at com.sap.aii.ibrep.gui.f4.composite.CompositeSelectionControl.initializeTree(CompositeSelectionControl.java:633)
     at com.sap.aii.ibrep.gui.f4.composite.CompositeSelectionControl.setUsedConditions(CompositeSelectionControl.java:554)
     at com.sap.aii.ibrep.gui.f4.SelectionControl.setUsedConditions(SelectionControl.java:99)
     at com.sap.aii.ib.gui.f4.AbstractSearchHelp.setUsedConditions(AbstractSearchHelp.java:134)
     at com.sap.aii.ib.gui.f4.BasicSearchHelpSettings.initializeSearchHelp(BasicSearchHelpSettings.java:99)
     at com.sap.aii.ib.gui.f4.AbstractSearchHelp.setSearchHelpSettings(AbstractSearchHelp.java:138)
     at com.sap.aii.ib.gui.table.TableValueListAction.executeF4Help(TableValueListAction.java:75)
     at com.sap.aii.ib.gui.shelp.ValueListAction.actionPerformed(ValueListAction.java:97)
     at com.sap.aii.utilxi.swing.framework.mtaction.MTActionGroup.actionPerformed(MTActionGroup.java:52)
     at com.sap.aii.utilxi.swing.framework.mtaction.IBToolButton.performDefaultAction(IBToolButton.java:430)
     at com.sap.aii.utilxi.swing.framework.mtaction.IBToolButton.access$600(IBToolButton.java:50)
     at com.sap.aii.utilxi.swing.framework.mtaction.IBToolButton$3.run(IBToolButton.java:341)
     ... 8 more
On another PC I can access the same system/SWC and I am able to create an action and select an interface of type
Operation. So the system seems to be allright. Does anyone know this error and can tell me how to fix it?
I just figured out, that it must have to do with my user. Another colleague could log on on my PC and is able to create
an action. So Java WebStart or other generic problems are not relevant. But I have all roles in ABAP like him.
I also created actions in this SWC some months ago.
Regards
Chris
Edited by: Christian Riekenberg on Jul 15, 2010 4:11 PM

Hi,
which Java version have you on this PC ?
because if version is too recent... then in PI we have bad behaviour like some buttons are no more available, and perhaps we have also your problem.
to know your Java version, open the windows configuration console, then choose "Java". In the openned application, in tab "Java" click on the second display button. In my case, I have a JRE 1.5....
If you have 1.6, it's not good, I suggest you to just deactive it in this same tool (there is a checkbox).
Regards.
Mickael

Similar Messages

Error while creating inbound delivery

Hi All,
I get an error while creating inbound delivery from ASN
"Error during conversion of unit of measure: UoM is missing -> ST BOR131
Please help solve this issue.
Thanks in advance
Regards,
Thiru

hi,
please maintain the uom for tour material.
or
reffer this link
Alternate Unit of Measure Conversion Rule Error
/thread/2000551 [original link is broken]
Thanking you.

Error while consolidating (The operation couldn't be completed. Permission denied)

I have just bought a new MacBook and that has given me extra harddrive space, and now I am trying to consolidate some masters in Aperture, that I have on my Time Capsule. But I get this error:
Error while consolidating (The operation couldn’t be completed. Permission denied)
I can access my Time Capsule in Finder perfectly well. Can anyone help?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
Can I know what this mean? It completely fail all entire job.
Backup was on half way go, it already took about 3TB data and it fail.

Hi Oneoa,
Please verify the antivirus exeptions. Look at this two links for more information:
http://technet.microsoft.com/en-us/library/ff399439.aspx
http://support.microsoft.com/kb/928840
I hope this solves your problem, please post your progress so I may assist you further.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

RMAN-10011: synchronization error while polling for rpc 8, action=startdefa

Could anybody explain what is this error message caused by?
TIA
The entire spool below:
051107064744: NetBackup RMAN Backup Started
ORACLE_SID=db02
backup_type=cold
number_of_channels=2
Started by: Oracle
051107064745: Checking database status
051107064745: Database status: OPEN
051107064745: Getting database password
051107064746: Checking database password
051107064746: Database password: Valid
051107064746: Checking Database mode
051107064746: Database mode: NOARCHIVELOG
051107064746: Shutdown no archive
051107064838: RMAN BACKUP STARTED
Recovery Manager: Release 10.1.0.4.0 - 64bit Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
connected to target database: db02 (DBID=3504436532)
RMAN> connect catalog *
2> run
3> {
4> sql 'alter session set sort_area_size=12582912';
5> sql 'alter session set sort_area_retained_size=1048576';
6> allocate channel t1 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
7> format 'df_%d_%p_%u_%t';
8> set limit channel t1 maxopenfiles=1;
9> allocate channel t2 type 'SBT_TAPE' parms="ENV=(NB_ORA_POLICY=ORA_solcdi02, NB_ORA_SERV=sun4)"
10> format 'df_%d_%p_%u_%t';
11> set limit channel t2 maxopenfiles=1;
12> backup database filesperset=64
13> include current controlfile;
14> sql 'alter database open';
15> release channel t1;
16> release channel t2;
17> }
18>
connected to recovery catalog database
starting full resync of recovery catalog
full resync complete
sql statement: alter session set sort_area_size=12582912
sql statement: alter session set sort_area_retained_size=1048576
allocated channel: t1
channel t1: sid=160 devtype=SBT_TAPE
channel t1: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
allocated channel: t2
channel t2: sid=159 devtype=SBT_TAPE
channel t2: VERITAS NetBackup for Oracle - Release 5.1 (2004122521)
Starting backup at 11-MAY-07
channel t1: starting full datafile backupset
channel t1: specifying datafile(s) in backupset
input datafile fno=00005 name=/oradata/10gid/u01/grid102/grid102/mgmt.dbf
input datafile fno=00006 name=/oradata/10gid/u01/grid102/grid102/mgmt_ecm_depot1.dbf
input datafile fno=00007 name=/oradata/10gid/u01/grid102/grid102/system02.dbf
input datafile fno=00004 name=/oradata/10grid/u01/grid102/grid102/users01.dbf
channel t1: starting piece 1 at 11-MAY-07
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
input datafile fno=00008 name=/oradata/10ggrid/u01/grid102/grid102/mngmecm02.dbf
input datafile fno=00001 name=/oradata/10ggrid/u01/grid102/grid102/system01.dbf
input datafile fno=00002 name=/oradata/10ggrid/u01/grid102/grid102/undotbs01.dbf
input datafile fno=00003 name=/oradata/10ggrid/u01/grid102/grid102/sysaux01.dbf
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_19ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:06:05
channel t2: starting full datafile backupset
channel t2: specifying datafile(s) in backupset
including current controlfile in backupset
channel t2: starting piece 1 at 11-MAY-07
channel t2: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_1aihed24_622277700 comment=API Version 2.0,MMS Version 5.0.0.0
channel t2: backup set complete, elapsed time: 00:00:35
channel t1: finished piece 1 at 11-MAY-07
piece handle=df_GRID102_1_18ihecmm_622277334 comment=API Version 2.0,MMS Version 5.0.0.0
channel t1: backup set complete, elapsed time: 00:06:48
Finished backup at 11-MAY-07
Starting Control File and SPFILE Autobackup at 11-MAY-07
piece handle=c-3404436532-20070511-00 comment=API Version 2.0,MMS Version 5.0.0.0
Finished Control File and SPFILE Autobackup at 11-MAY-07
sql statement: alter database open
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-10010: error while checking for RPC completion
RMAN-10011: synchronization error while polling for rpc 8, action=startdefault
Recovery Manager complete.
051107065708: RMAN BACKUP FAILED, RMAN exit status=1
051107065708: Cleaning log file (removing passwords)
051107065709: Error Log Check
051107065837: Rman Stat Generator
051107065956: Backup Html Generator
051107065956: NetBackup RMAN Backup Finished
######################################################

Check on metalink:
RMAN-10011: synchronization error while polling for rpc 3, action=startdefault
Note:429572.1
Werner

InvocationTargetException:There was an error while invoking the operation.

Hi,
I am having issues getting my remote server configured right after everything working properly on the local host. I am getting the following error:
InvocationTargetException:There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
The key parts of the large message I am getting after that are:
Class "test" does not exist: Plugin by name 'Test' was not found in the registry; used paths:: ..../smii/test/ ID5D8FE3F-A1D1-4174-98B3-4BED10FD8FFE I79685B66-D792-E4E9-13B3-00004DA5951B I0F94D267-0704-3C89-0B5B-0000090BA097 134950398900
I don't know how this last part of the address with random number and letters is getting there.
Also, when searching for my server settings today it seems to add a "-1" on the end of the initial directory on the server...not sure why but I seem to be having major issues implementing the service remotely.
Any help would be appreciated.
Cheers, Andrew

I also cannot get my flex server to validate. It always comes up with the error of the server is either off or wrong root url even when everything is set up right and I can access everything via either finder or the web browser.
Any suggestions? The server does not have any fire walls up to prevent access.

I am getting an error while doing Remove From Client action in inactive dc'

Hi,
I am getting an error while i am unlocking the DC from my system.
i selected option remove from client from context menu of DC in inactive dc's
then a popup came asking delete contents or donot delete contents.
i select donot delete contents.....
now i ts throwing an error ...as shown below
Some files have been edited/changed.
Look over your open activities.
com.sap.tc.devconf.SyncException: Cannot unsync component. There are files checked out.
     at com.sap.tc.devconf.impl.DCProxy.doUnsyncSources(DCProxy.java:4187)
     at com.sap.tc.devconf.impl.DCProxy.unsync(DCProxy.java:1322)
     at com.sap.tc.devconf.impl.DevelopmentConfiguration.unsync(DevelopmentConfiguration.java:4897)
     at com.sap.tc.devconf.impl.DevelopmentConfiguration.unsync(DevelopmentConfiguration.java:5045)
     at com.sap.ide.eclipse.component.provider.actions.dc.DCUnsyncAction$1.execute(DCUnsyncAction.java:127)
     at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
     at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
     at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
     at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:357)
     at com.sap.ide.eclipse.component.provider.actions.dc.DCUnsyncAction.run(DCUnsyncAction.java:212)
     at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
     at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Regards,
Rajesh

Hi Rajesh,
er, what kind of answer do you expect here?
"Some files have been edited/changed.
Look over your open activities.
com.sap.tc.devconf.SyncException: Cannot unsync component. There are files checked out."
Do you have file checked out? If yes, you should probably check in your changes or revert them and remove the configuration afterwards.
If you don't have files checked out maybe there are some files that were made writable without DTRs knowledge.
Regards,
Marc

Error while saving Inbound Door Log

Hi Experts
While saving Inbound Door log, this error pops up after entering SLED/SUT details. Error message : Field LTAP-VFDAT does not exist in the screen SAPML03T 0104
Rgds
Ramesh
Edited by: ramesh04 on Feb 14, 2011 3:41 PM

Hi Shruthi,
I know this has been a long while since you posted the question, how did you resolve this error because I am getting the same error.
Many thanks,
Garikai.

Error while creating inbound process code

Hi gurus,Iam creating a custom idoc.
800 -> sender
810 -> Receiver
i have completed outbound processing on 800.
On 810, completed following steps for inbound processing.
1.) I have added my Inbound FM in BD51.
2 ) Assigned my FM to Message type and Idoc type in WE57.
3 ) When adding my FM to process code in BD67, it is showing error that
Entry ZSATPC does not exist in TEDE2 - check your entry.
{ zsatpc is my custom process code }.
4) While Creating Process Code in WE42 with options [processing with ale service / Processing
by FM] and saving it is giving error that
" " is not a valid language.
And when I saw help (?) regarding this error, the following text appeared in a window.
Diagnosis
A key with language "" "" was specified for table "EDE2T". This is not a valid language.
This applies to field "LANGUA"
System Response
The system rejects the key.
Procedure
Enter a valid language. This is usually the language you logged on in.
You logged on in language "EN".
Table T002 contains a list of valid languages.
Please solve this error. Give me steps to create inbound process code.
thanx in advance. Hoping replies soon........
Satish.

Dear Satish,
Very peculiar. The language should come from your log on language. Try to login into the system again. Call we42 again and see if it works.
Regards, Rakesh

Error while choosing vendor in document

Hi
In address tab of vendor both ship to pay to are filled.but excise information is not filled.while making marketing doc and choosing vendor the error i receive is No matching record found " (CRD1)(ODBC-2028)[Message 131-183]

hello,
i experience this before, i just did some modification on the address of my BP and let it Update the BP master data. this fixed my problem,
also try to check Note:903383 this may help you.
Regards
Fidel

B1358 error while posting inbound idoc with a FM

Hi
We are trying to post and inbound IDOC with the help of an rfc and eventually creating an invoice from a bdc wrapped in the RFC
The idocs are successfully pushed to R/3 while they are not getting posted and the error code in we02 is as follows
No status record was passed to ALE by the application
Message no. B1358
Diagnosis
The application failed to return a status record to the ALE layer after the IDoc was processed.
This is due to an error in the application function module which processed the inbound IDoc.
Procedure
If you wrote the application function module yourself, you need to change the program.
If the function module in question is a standard application function module, you should consult SAP.
Note: we are using a custom function module
regards
krishna

Hi Krishna,
I assume that your function module processing the IDOC does not follow the ALE/IDOC processing rules.
Please check out the programming guidelines in the SAP Online Help under:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/78/21758051ce11d189570000e829fbbd/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/78/21758051ce11d189570000e829fbbd/frameset.htm</a>
Important are the parameters and tables that need to be returned, containing the correct IDOC processing status. Please take the IDOC processing quite serious in regards to complete Logical Unit of Works.
Best regards,
SIlvia

Error while doing inbound delivery

HI,
In our process we do GR by using mvt type 561 initial stock upload and then against the material documents , create inbound delivery( PGR).. While doing PGR we are facing the error as follows,
STORAGE UNIT XXXXXXXXX IS WITHOUT APPENDANT HU
Could any one tell what is the problem?
Regards,
abi

Hi ,
Pls refer path Delivery Issue in PGI
Thanx....

Error While using executewithparams Operation in ADF 11.1.1.1.0 version

Hi all,
jdev version :ADF 11.1.1.1.0
I am trying to pass the values between the pages .for this i am drag and drop the Executewithparams Operation into the adfc-config file.but it is showing an error as "reference executewithparams not found".pls help me in this
Code:
<method-call id="ExecuteWithParams">
*<method>#{bindings.ExecuteWithParams.execute}</method>* --error showing in this line
<outcome>
<fixed-outcome>ExecuteWithParams</fixed-outcome>
</outcome>
</method-call>
Regards,

Hi Dimitris,
THANKS for your quick responce.this is my code in the page defination.can you pls guide me in this
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.54.7"
id="adfc_config___ExecuteWithParamsPageDef"
Package="soa_project_form.pageDefs" SkipValidation="true">
<parameters/>
<executables>
<iterator Binds="hcpByparams1" RangeSize="25"
DataControl="AppModuleAMDataControl" id="hcpByparams1Iterator"/>
</executables>
<bindings>
<action IterBinding="hcpByparams1Iterator" id="ExecuteWithParams"
RequiresUpdateModel="true" Action="executeWithParams">
<NamedData NDName="p_id" NDValue="#{pageFlowScope.pid}"
NDType="java.lang.String"/>
</action>
</bindings>
</pageDefinition>

Error while posting Inbound Idocs-"EDI: Partner profile not available"

Hi,
I am getting the error "EDI: Partner profile not available" Status -56 while creating inboud Idocs.
I have done the following steps so far
1.Created IDOC basic Type and Message Type. (Custom)
2. Created process code to process the IDOC.
3. Use the FM IDOC_INBOUND_WRITE_TO_DB to create the inbound IDOC.
4. Use the FM IDOC_START_INBOUND to process the IDOC.
Is ther anything else that i have to do inorder to post the idoc sucessfully.
Thanks in advance
-Nishant
Edited by: nishant patel on Nov 13, 2009 10:35 AM
Edited by: nishant patel on Nov 13, 2009 10:41 AM

Hi,
Check in WE20 if the partner profile is configured for the idoc type and the message type. That might be the cause of the error.
Also make sure the same partner profile details are sent to the control record. Partner profile details are stored in the table EDP13.
Hope this helps
Regards
Shiva

Proxy-Generierung: Fehler aufgetreten error while gnerating Inbound proxy

Hi Experts,
1) i created outbound & inbound service interfaces with same MT.
2) when i was create the server proxy first attempt its created successfully.
3) Due to some changes in the sap pi structure ( DT ,MT,SI ). i delete the server proxy instead of regenerate proxy in SPROXY.
4) while deleting the popup window shows the only one option "delete only root object". because i used same DT,MT for both Service interface.
when i create proxy again all objects were created for the same interface but while activating the proxy gives belowerror
"Proxy-Generierung: Fehler aufgetreten"
i tried with different name for the service interface this time it gives the another error like
"un comparable parameters".
i tried for creating proxy to another interface which is in the same name space it also gives the same error.
even if create server proxy for other service interfaces which are belonging to another namespaces then i got the below error
"Authorization Check failed: S_ICF_ADM with parameters ACTVT 07"
Please advice me.
Thanks In advance
Edited by: katakoti on Oct 21, 2011 11:25 AM

problem was resolved.
we got this because when i delete the proxy i have the all authorizations for the SPROXY tcode.
like icm_auth =01,03,07....
but when recreate the proxy my roles hasbeen changed by the security team according to their new roles
in that roles i dont have authorization to create the proxy due to this i got above error.
now i got all access so it resolved

Error while choose inbound operation in action

Similar Messages

Maybe you are looking for