Error while doing inbound delivery

HI,
In our process we do GR by using mvt type 561 initial stock upload and then against the material documents , create inbound delivery( PGR).. While doing PGR we are facing the error as follows,
STORAGE UNIT XXXXXXXXX IS WITHOUT APPENDANT HU
Could any one tell what is the problem?
Regards,
abi

Hi ,
Pls refer path Delivery Issue in PGI
Thanx....

Similar Messages

While doing inbound delivery using VL31N

While doing inbound delivery using the T-code VL31N , am getting the error message " Factory calendar is not recognised "
Guys Please help me out

Hello ,
while doing the PO in the item detail confirmations tab i have selected the inbound delivery ECC and saved .After that i tried to create the inbound delivery for the PO at that time am getting the message 'factory calender is not recognised " .
I have checked in the factory calender which is assigned to controlling area is" K4 "
Please help me out

Error while creating inbound delivery

Hi All,
I get an error while creating inbound delivery from ASN
"Error during conversion of unit of measure: UoM is missing -> ST BOR131
Please help solve this issue.
Thanks in advance
Regards,
Thiru

hi,
please maintain the uom for tour material.
or
reffer this link
Alternate Unit of Measure Conversion Rule Error
/thread/2000551 [original link is broken]
Thanking you.

Error while doing Rapid delivery confirmation

Hi,
i am encountering the following error while doing rapid delivery confirmation, "set checkbox for rapid confirmation", pls guide me where to set this check box and wat are all the necessary settings need to be done.?
Thanks in Advance,
V.S.Sabitha

Hello ,
There is a field called 'Rapid Confirm' in transaction O4H1. You need the select this first.
Check the link for the prerequisites :
http://help.sap.com/saphelp_oil472/helpdata/en/bf/a007362b89e30ae10000009b38f839/frameset.htm
Regards ,
Jerin Ipe John .

Error while doing outbound delivery against Purchase Order

hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJ

Please go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release.

GRN Status : Archived while doing inbound delivery

Dear Gurus,
I have made the Inbound delivery & subsequenty made the TO through LT06 & confirm. In background GRN is to be prepared.
In document flow I could see the GRN status "ARCHIVED" . I am getting more & more of the same error ( GR archived & LS24 is showing positive & negative values ).
Need your help that why it is happening...we need to dispatch the goods ASAP.
Thanks.........AMIT

Hello ,
while doing the PO in the item detail confirmations tab i have selected the inbound delivery ECC and saved .After that i tried to create the inbound delivery for the PO at that time am getting the message 'factory calender is not recognised " .
I have checked in the factory calender which is assigned to controlling area is" K4 "
Please help me out

Error while doing inboud delivery

1. While doing an inbound delivery for P.O
i got the following error
"Delivery type SP for delivery xxx not contained in table TVLK".
solution please.
2. While doing invoice reduction it is throwing the following error
"tax amount different to expenditure/revenue account assignment".
How to fix this.
Cheers

Yes.
The error is coming only when you post the Inbound delivery.
When i checked in Table TVLK i can see for Delivery type SP, there are some fields which were defined as in Delivery Type SP.
Even after checking twice the delivery type configuration, I don't understand where i am going. It's giving me same error message: Delivery type SP for delivery xxxxxx not contained in table TVLK.
The program you gave in your mail how to check n where to check, is that program need to be done by ABAPers?
Thanks for your early response Jurgen L

Error while activating Inbound Delivery Notification

Hi,
I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
What's missing?
I help will be rewarded.
Thanks,
Amit

Thanks Virendra,
You have pointed to the right direction. Basically, without checking for the posts here, which are really helpful, I went to system one more time only to find that I have made a configuration error. I am just sharing if anyone else in future faces same situation, he/she can be benefited out of it.
In EWM system - I had created number range with transaction SNRO for object /SCWM/SSCC putting 01 (from 1 - 1999999) as internal and 02 (from 2000000 - 2999999) as external number range.
In EWM system - I had assigned the number range in following place:
Extended Warehouse Management > Cross Process Settings > Handling Units > External Identification > SSCC Generation Acc. to EAN128 > Maintain SSCC Generation for Each Warehouse Number
In ERP system - I had created number range with SNRO for object LE_SSCC with same attributes as above. i.e. 01 as internal and 02 as external.
Now when I packed the inbound delivery in ERP system, I used packaging material for which the number range is internal (i.e. 01) and it created HU with SSCC number. Up to this all were good. But when the same HU transferred from ERP to EWM system, SAP treated the HU number coming from ERP system as external HU number (which is logical) but it was looking at number range 02 (since it was marked as external) but was failing to match as the allowed numbers doesn't fit along with the number transferred from ERP system. Hence it was giving error.
As a solution I declared 01 as external and 02 as internal and also inverted the number range assignment for SSCC generation in EWM system.
It created Inbound Delivery successfully.
Thanks all of you for helping on it.
Cheers,
Amit

Error while posting Inbound Delivery

I am trying to post inbound delivery and getting error that there is no item avaialble on the Purchase order. Please help.
Thanks in advance.

Hi,
Check Confirmation Control Key of resp. purchase order.
Also check for the said inbound delivery, have you created shipment for this?
If no, create with respect to Inbound delivery using transaction VT01N and then do GR agianst Inbound delivery.
Please check and revert.
Thanks
Hrishi
Edited by: Hrishi on May 30, 2011 10:53 AM

Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.k

I tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
       gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
       lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
       git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
       gwa_item_data TYPE bapiobdlvitemcon,
       git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
       gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
       git_return    TYPE STANDARD TABLE OF bapiret2,
       gwa_return    TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900002'.
gwa_item_data-dlv_qty         = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900002'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900003'.
gwa_item_data-dlv_qty         = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900003'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '000020'.
gwa_item_data-dlv_qty         = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '000020'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
    header_data    = gwa_header_data
    header_control = gwa_header_ctrl
    delivery       = lv_delivery
TABLES
    item_data      = git_item_data
    item_control   = git_item_ctrl
    return         = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

Getting the error while doing PGI for depot delivery

Hi
I am getting the below error while doing PGI for Depot delivery. This error is happening only when I taking the materials from stock transfer order which has more than 10 line items. Same issue is not happening when I am taking one material in Stock transfer order in & same material in depot delivery. Please see the screen shots below attachment. I have already maintained no range for the object J_1IDEPINV for year 2014.
Regards
PK

Moved from SAP ERP SD Sales to Internationalization and Unicode. Please post all your CIN related queries here. Also ensure that before posting, you made efforts in searching in SCN or Google. The reason for this indication is the issue you posted has already been discussed many times here and you will get some clue had you searched.
G. Lakshmipathi

Error while doing Vendor Return Delivery

Dear Gurus,
When i am making vendor return delivery( From Unrestric Stock) getting error like below:
             <b>Insufficient Quantity in the Register RGSUM</b>
Quantity in the register is the difference between Receipts and Issues. Since for the particular material type and excise group there may not enough balance.
Procedure
1. Check Table J_1IRGSUM.
2. Create Receipt enter the register for the excise group.
Could you plz guide me to overcome this problem.
Regards,
Venkat

Dear Dipak,
Thanx for your reply.
I will give bit explanation abt my scenario:
Made a Goods Receipt.......for 100kG
           After Goods mooved to QM and subsequently moved to Unrestricte stock
           When i issued that material to prodcution foud out of 100kg, 10KG are
              defective........For 10KGs i want to make Return delivery to Vendor.
           For this, i am doing GR ( thrugh MIGO) Selecting as Return Delivery and
              giving reference of GR document number( i.e 10KG receipt)....when doing
              this i am getting Error Message.
If i missed any step in between....pls point out and guide me.
For doing J1IS, i need return delivery GR number, but while Doing Return Delivery GR getting Error message like that.
Regards,
Venkat

Error while doing file to mail scenario

Hai All,
I am getting the following errors while doing the file to mail scenario.
Error:Exception caught by adapter framework: Failed to call the endpoint
Error:Delivery of the message to the application using connection AFW failed, due to: Failed to call the endpoint.
Can anyone please give me solution...

Try this:
Re: "Could not determine code page" inbound side error
and this
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Error while doing MIRO-Overflow for arithmetical operation (type P) in prog

Hi ,
I am getting the error while doing the MIRO as below-
Runtime Errors         COMPUTE_BCD_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
Date and Time          20.05.2009 10:07:03
Short text
     Overflow during the arithmetical operation (type P) in program "SAPLMRMC".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMRMC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
      caught in
     procedure "MRM_AMOUNT_QUANTITY_PROPOSE" "(FUNCTION)", nor was it propagated by
      a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
Please let me know how can this be removed.

Hi,
There can be some problem with tolerances set in the customizing.
In my case, I was getting this error because of delivery date variance. The difference between delivery date maintained in PO and invoice date was huge and hence the multiplication of price of PO and difference of delivery date was huge and that was the reason for error.
Similarly in your case also, there will be some tolerance limit problem.
Please check your tolerance limits set in customizing.
Regards,
Mihir Popat

Error while doing inbound delivery

Similar Messages

Maybe you are looking for