Error While Confirmation: Grant 0 does not exist

Hello Experts,
We have SRM 4.0
While doing confirmationuser got error: 'Grant 0 does not exist'.
(SC with,Service line item with Acct Assignment Category : Asset valuated GR(E) with asset number but no GL acct), What is significance of such error?
Thanks,
Dhananjay

With my apologies for the typo indeed.
User2 must grant select on his two tables to user1 with grant option:
SQL> grant select on table1_from_view to user1 with grant option;
SQL> grant select on table2_from_view to user1 with grant option;
Don't get tempted to make the same mistake as I did...

Similar Messages

Confirmation control key does not exist

There is a old one PO, which was created with confirmation control key ZSC1 ; Now issue is ZSC1 has been deleted but it is showing in po, now user want to close the po as want to ticked the "delivery completed" ind. in the Delivery tab page at Item level in the po.
In this cas he is facing the error as "Confirmation control key does not exist" so:-
1. How can be close the po.
2.Is there any option, from where we can check the change control i.e. can be checked when ZSC1 was deleted.

Hi Jurgen,
I think you misinterpret regarding this issue.
confirmation control key is not deleted in PO.
It is deleted from configuration setting I mean from IMG -> Material Management -> purchasing -> confirmation -> Setup confirmation control.
since it's exists in po but not in config. thats the reason system given us that error.
so my question was:-
how to get change control for the same, i.e. when it was deleted from config. setting
And how set del. completed ind. in po for closing the po, bcoz it's showing error as "Confirmation control key ZSC1 does not exists"

Grant TRANSPORT does not exist during creation of Shopping Cart(Error Msg)

Hi,
When i create a SC in SRM 7.0 system, it gives following errors once i check the document.
(01) Grant TRANSPORT does not exist
(02) Master record for commitment item /TRANSPORTTRANSPORT does not exist
In the backend ECC G/L Account we have a Commitment Item "Transport" in Create/bank/interest tab attached to the G/L.
SRM side: In Account assignment tab of SC, i choose a same G/L which is being mapped to Prod Cat.
But no where the Grant is active. Is there any option for defining a Commitment item on SRM side. I feel the error is coming on SRM side when i try to create an SC!
Best Regards,
Aj!

Hi there,
See response from developer on this.
SRM SE11 structure BBPCOBL1_470 last field sequence is not in synch
ERP                         SRM
BBP_COBL_47A                BBPCOBL1_470
ACC_NO                      ACC_NO
.INCLUDE                    BUDGET_PERIOD
GRANT_NBR                   .INCLUDE
CMMT_ITEM_LONG              GRANT_NBR
.INCLUDE                    CMMT_ITEM_LONG
BUDGET_PERIOD               .INCLUDE
                            DUMMY_EEW_PD_ACC_CHK
Please adopt SRM structure BBPCOBL1_470 so that new field BUDGET_PERIOD
is placed right after last .INCLUDE.
Hope this helps,
Kind Regards,
Matthew

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Part of Photoshop isn't functioning. Under adjustments, when HDR toning is clicked on I get a code: Error 48: File or folder does not exist. Line:11 - $.evalFile(g_StackScriptFolderPath "StackSupport.jsx"); How can it be fixed?

The phone company was here working on something while I was gone. They sat down at my computer (iMac) and since then HDR toning doesn't work. Get the code: Error 48: File or folder does not exist. Line: 11 -> $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx"); How can this be fixed?

Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

HDR Toning Error 48: File or Folder Does Not Exist

After migrating to a new computer HDR Toning is no longer available.
I get a pop-up: Error 48: File or Folder Does Not Exist
Line 11 -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
What's the fix for this, if anyone knows?
Thanks.

Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

Error 'The location you entered does not exist or is flagged as inactive.'

Hi
In iRecruitment, when Employee Candidate applies for any job, we are getting the error 'The location you entered does not exist or is flagged as inactive.' And it stops employee from applying to any jobs. We are in 11.5.10.2 version.
Appreciate any pointers on the same.
Thanks
Alagappan
Edited by: user5733015 on Dec 19, 2009 8:35 PM

Hi Hussein
Thanks for the update.
I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
Can you give me some insights 'What could be the actual problem'?
Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
Appreciate all your help.
Thanks
Alagappan

Getting error ORA-20001: FLEX-ID DOES NOT EXIST

I am trying to load new jobs.. I have run the fnd_flex_val_api.create_independent_vset_value to load the values into the segments needed.. NREL HR Job Title and NREL HR Job Descriptor and the values are in there.
I'm getting this in the hr_job_api.create_job api. thanks, Scott
Edited by: user12036380 on Aug 26, 2010 3:18 PM

Hi,
What is the application release?
Please see if these docs help.
Error 'ORA-20001: FLEX-ID Does Not Exist' In HR_POSITIONS_API While Loading Positions [ID 790124.1]
HR_ASSIGNMENT_EXTRA_INFO_API.UPDATE_ASSIGNMENT_EXTRA_INFO Errors with 'ORA-20001: FLEX-ID DOES NOT EXIST' [ID 1163457.1]
HR_IN_PERSONAL_PAY_METHOD_API Error Ora-20001 Flex-Id Does Not Exist [ID 834844.1]
Cannot Create Employee Via API - FLEX-ID DOES NOT EXIST Error Occurs [ID 554850.1]
Thanks,
Hussein

Error: MDL1819: User Name OWB_OWNER does not exist in repository.

Hi All,
While doing OWB metadata export I got the following error.
Error: MDL1819: User Name < BCP_OWB_OWNER> does not exist in repository.
Actually daily I will take back up for metadata in OWB_OWNER project.
But last 3 days onwards I am getting this error.
Plese help me?
I have nearly 50 mapping in this repository.
Thanks in Advance.

Hi!
I know I'm late with this post, but I'll post it anyway for future reference!
I encountered the same problem and found out that I had a trailing space in my login name, so check for any traling spaces at login to OWB-designer!
(From the error message pasted in your question it seems you have a space in the beginning)
That solved the problem for me.
BR Par

Getting an error -ORA-20001: FLEX-ID DOES NOT EXIST in migrating Assignment

Hi,
I am working on migration of persons data (Person/Assignment ) etc. in Oracle HRMS. While migration of Assignments data I am getting an error: ORA-20001: FLEX-ID DOES NOT EXIST.
Please help me.
Regards
Sr
Edited by: user10939296 on Jul 9, 2009 1:21 AM

This error occurs as FLEX-ID for different combination for KFFs has not been generated. Therefore while migration your script is unable to fetch the Flex-id as they are not generated. You can work your way around by entering the possible combinations of KFFs for a single employee and eventually entering data for one employee manually.
eg. if for People Group Flexfield there are two segments A and B
A having LOV Corporate and Others
B having LOV Executive and Non Executive
Then you have to enter the possibilities from the frontend for one employee:
Corporate.Executive
Corporate.Non Executive
Others.Executive
Others.Non Executive
HTH

Error 1070023 Configured Disk volume does not exist.

Hi
I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
Error 1002097 Unable to load database Basic.
The App log showed the following error
Error 1070023 Configured Disk volume does not exist.
Please help..

So everything works when the volume is set to E?
If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Ruler Tool- Error 48: File or folder does not exist

I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?

i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e

Error While Confirmation: Grant 0 does not exist

Similar Messages

Maybe you are looking for