Error while connecting to Database after Database upgradation

Hi All,
I installed and worked with BAM and used Oracle Database 9i previously. After the Database
was upgraded to 10g (10.2.0.4.0 which is compatible for BAM), I am trying to ReInstall BAM
which is throwing me an error.
It accepts the Database Login Information but at the step of building Repository for
Enterprise Link it gives up the following error:
' A connection with the database cannot be made '
Can anyone please help me to figure out this one.
Thanks,
Vishal

Hi,
I also have the same problem.Could you plz tell us what configuration I need to add in tnsnames.ora file.
content of my tnsnames.ora file is below
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Rahul-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
)

Similar Messages

  • Error while creating webdynpro iview after  portal upgrade to ehp1

    Hello  All
    We have upgraded  our portal from 7.0  sp  15   to  portal  7.01  sp  3    .
    After upgrade we can create  iviews using portal components  but we are not able to create  iview using Iview template
    We are getting following  error  while creating  webdynpro java  iview
    java.lang.NoSuchMethodError: com.sapportals.portal.pcd.gl.PcdSearchControls.addExplicitAttributeCheck(Lcom/sapportals/portal/pcd/gl/IPcdAttribute;)V
         at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getPCDCatalog(TemplatesCacheSrv.java:184)
         at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.refresh(TemplatesCacheSrv.java:589)
         at com.sap.newpage.pagewizardpanes.PageTemplateSelection.initTemplates(PageTemplateSelection.java:229)
         at com.sap.newpage.pagewizardpanes.PageTemplateSelection.wdDoModifyView(PageTemplateSelection.java:172)
         at com.sap.newpage.pagewizardpanes.wdp.InternalPageTemplateSelection.wdDoModifyView(InternalPageTemplateSelection.java:305)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:488)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:488)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:488)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:488)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1300)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:327)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:869)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Regards
    Rajendra

    Hello Rajendra,
    please can you tell me, if you finally get a Solution for this Problem about  iviews creation with template Error after upgrade.
    Thanks and take Care
    Gedeon

  • Reg: Error while connecting to a remote database as SYS user.

    Hello all,
    When i try to connect to a database as SYS user i'm getting the error as
    ora-01017 invalid username/password logon denied
    But it is logging from the local system where the oracle is installed.
    I created the password file and checked the contents in v$pwfile_users.
    The result is " no rows selected".
    so when i try to grant sysdba to sys user
    grant sysdba to sys;
    i'm getting error as,
    ORA-01994: GRANT failed: password file missing or disabled
    Please help me in resolving this.
    Regards,
    Konda

    I created the passwordfile using the command below,
    orapwd.exe file=E:\app\Administrator\product\11.2.0\dbhome_1\database\PWDfile.ora force=y entries=30 password=<sys_password>
    is this okay...??

  • Noclassfound error while connecting java with oracle database

    hi all
    the source code metioned below gets compiled. but when it is run
    it gives thefollowing error.
    ClassNotFoundException: jdbc.driver.OracleDriver
    Exception in thread "main" java.sql.SQLException: No suitable driver
    at java.sql.DriverManager.getConnection(DriverManager.java:532)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at pract.main(pract.java:16)
    import java.sql.*;
    class pract
    public static void main (String args []) throws SQLException
         try
              Class.forName("jdbc.driver.OracleDriver");
              catch(java.lang.ClassNotFoundException e)
    System.err.print("ClassNotFoundException: ");
    System.err.println(e.getMessage());
              Connection conn = DriverManager.getConnection
    ("jdbc:oracle:thin:@anant:1521:student", "scott", "tiger");
    // @machineName:port:SID, userid, pas
    Statement stmt = conn.createStatement();
    ResultSet rset = stmt.executeQuery("select * from emp");
    while (rset.next())
    System.out.println (rset.getString(1)); // Print col 1
    stmt.close();
    i have included the following driver classes in the classpath
    ojdbc.jar,
    ojdbc_g.jar,
    classes111.jar
    but still im unable to connect.
    can anyone help me in solving this simple problem.

    hi ,
    you hav not stated which oracle ur using...still if u r using oracle 9i then u hav to include classes12.jar file in ur lib build classpath and then tryout following changes in code....
    DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
    conn = DriverManager.getConnection("jdbc:oracle:thin:@<host>:<port>:<sid>","scott","tiger");
    hope this ll help....

  • Error while connecting to Oracle 11gR2 database instance

    Dear All,
    I installed Oracle 11g R2 on my local machine (laptop) successfully. Using Sql Developer I tried to connect to the instance (ORCL) but not able to connect to the server. Please let me know hw to configure tnsnames.ora, listener.ora, and sqlnet.ora files. I tried to configure those three files using Net manager, but since I am novice, I could not do it..
    Here are the details of my windows services related to oracle installation..
    OracleOraDb11g_home1TNSListener (started)
    OracleServiceORCL (started)
    Listener.ora
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
    (SID_NAME = ORCL)
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (PROGRAM = extproc)
    (SID_NAME = ORCL)
    (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = extproc))
    ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
    tnsnames.ora
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    LISTENER =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = ORCL)
    (PRESENTATION = RO)
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = ORCL)
    sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    ADR_BASE = C:\app\Administrator\product\11.2.0\dbhome_1\log
    As per my guess, entries in tnsnames.ora, and listener.ora are not appropriate. Please help to configure the correct values in those files.
    Thanks and Regards
    Santosh

    910192 wrote:
    Dear All,
    I installed Oracle 11g R2 on my local machine (laptop) successfully. Using Sql Developer I tried to connect to the instance (ORCL) but not able to connect to the server. Please let me know hw to configure tnsnames.ora, listener.ora, and sqlnet.ora files. I tried to configure those three files using Net manager, but since I am novice, I could not do it..
    Here are the details of my windows services related to oracle installation..
    OracleOraDb11g_home1TNSListener (started)
    OracleServiceORCL (started)
    Listener.ora
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
    (SID_NAME = ORCL)
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (PROGRAM = extproc)
    (SID_NAME = ORCL)
    (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = extproc))
    ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
    tnsnames.ora
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    LISTENER =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = ORCL)
    (PRESENTATION = RO)
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = ORCL)
    sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    ADR_BASE = C:\app\Administrator\product\11.2.0\dbhome_1\log
    As per my guess, entries in tnsnames.ora, and listener.ora are not appropriate. Please help to configure the correct values in those files.
    Thanks and Regards
    SantoshError msg?

  • Error while connecting to the database from a JSP Page

    Hi,
    I am using a simple JSP page which is based on the sample JSP pages from OTN.
    When I try to connect to my database using the following code:
    InitialContext ic = new InitialContext();
    OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
    m_connection = ds.getConnection();
    I get the following error:
    Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
    Does anybody know wht this is happening?
    Any help would be appreciated
    FRank

    Hi Frank,
    Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
    If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
    Ensure the case of the JNDI lookup string, since, it is case sensitive.
    Hope this helps.
    Abhijeet

  • Error while connecting MYSQL Database

    Hi,
    I use a 30 days trial of Crystal Reports 2008. When i try to connect with the database i always get the next error: [http://www.visiscan.nl/error.jpg]
    The database is 4.1GB large and there is 10GB free space on the database.
    Anybody can tell me what to do?

    Hi Tom,
    As I understand the error while connecting to database is
    u201CFailed to retrieve data from databaseu201D
    There could be some could be multiple reasons for this.
    If you are using an ODBC connection then try to check the DSN. Recreate the same and then try.
    If the database is oracle check if native client is installed and try to ping from the native client to check if it responds.
    When connecting to Oracle, ensure that the Service name is identical to that used in the <ORA_HOME>/network/admin/tnsnames.ora file on the BusinessObjects XI Release 2 server.
    For ODBC databases, ensure that the ODBC DSN is exactly the same in the ODBC Manager as on the BusinessObjects XI Release 2 server.
    Please let us know if this helps
    Regards,
    Aditya Joshi

  • Error while connecting to workflow builder after installation...first time!

    Hi,
    I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-01403: no data found
    . SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
    In the previous threads when I searched for the same issue, I found that if
    select value from v$nls_parameters
    where parameter='NLS_CHARACTERSET';
    returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
    But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
    Please help me. I tried a lot. Any type of help will be highly appreciated.
    Thanks,
    Sumir

    This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
    HTH
    Srini

  • Error while Creating form on remote Database

    Hi All
    I m getting error while creating form on remote database thru
    Database link
    Line/Column Error
    7099/21 PLS-00454: with a returning into clause, the table
    expression cannot be remote or a subquery
    7099/9 PL/SQL: SQL Statement ignored
    7749/16 PLS-00454: with a returning into clause, the table
    expression cannot be remote or a subquery
    7749/9 PL/SQL: SQL Statement ignored
    and statement at line specified is insert statement. and at end
    of insert statement Returning caluse is there as follows
    RETURNING ROWID INTO "_ROWID";
    This returning clause is causing error. Does anybody knows how
    to handel it??
    Thanks
    Yogesh

    Yogesh
    I haven't seen the ora-03116 problem.
    What version of Portal are you running? Are the databases at the same version? Does your table have longs or anything strange in it?
    Can you query the table via the synonyms and link in sqlplus as the application schema? This is a good test because it eliminates Portal.
    You should try setting up synonyms etc for the emp table. If you still get the problem then Oracle may be able to replicate it. If not, then there's sth funny about your table maybe.
    I agree with Vishnu about creating everything in sqlplus. I create all my links and synonyms in sqlplus. They are all public. I have 2 synonyms: one takes you over the link the other takes you to the right schema. It's flexible and it works.
    data database: D grants to P (local schema) on table T
    public syn T = D.T (sys) (get the right schema)
    portal dbase : public db link to data database connecting as P
    public syn T = T@dblink (sys) (over the link)
    P is a schema created in both databases.
    Test is: P in portal dbase can "select * from T" and gets the right data.
    I never, ever refer to a schema when defining a form. ie. never P.T or D.T or whatever. I always refer simply to a synonym. For the above my form would be defined simply on the table T.
    Hope this helps
    Greg

  • Error while retreiving xml file from database

    Hi-
    I am trying to configure Planning and getting the following error message at instance configuration step:
    "Error while retreiving xml file from database"
    We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
    Here is the contents of the configtool error file:
    (Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
    (Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
    (Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
    (Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    Thanks for any help.

    After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
    Here is another quote from SharedServices_Security.log
    2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
    2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
    2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
    2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
    2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
    2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
    2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
    2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
    2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
    2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
    2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
    2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

  • Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

    Hi Planning installation Gurus,
    Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
    OS: Vista Premium
    SQL Server 2005
    Essbase:9.3.1
    Error Message: "System Failure: Error while retrieving xml file from database"
    Details of error:::::::::::::::::::::::::
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    Pls provide Solution

    Hi John,
    though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=windowsAuthentication
    SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
    SYSTEM_DB_CATALOG=plandb
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    my steps:
    Using SQL Server Management Studio
    Changed Widows authentication to SQL server authentication mode
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    To restart SQL Server from SQL Server Management Studio
    To enable the sa login by using Management Studio
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.}}}
    anything else should i change.................

  • Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

    Hi S9 installation Gurus,
    Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
    Detail of Problem:-
    After Susessful configuration of
    1) Foundation Services (Hyperion Shared Services)
    2) Essbase administration services
    3) Essbase Server
    4) Hyperion reporting and analysis
    5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
    Error Point: when i tick ckeck box in front of Product instance registration
    click next
    create instance
    click next
    instance name-Plan1
    Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
    server port: 8300 (system suggesting)
    tick on active instance
    click next
    Error Pop Up "System Failure: Error while retrieving xml file from database"
    Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=puser
    SYSTEM_DB_PASSWORD=GGAKFJ
    SYSTEM_DB_CATALOG=p1db
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    Note: puser (SQL Authenticated user)
    Thanks
    Kumar
    Edited by: user10385300 on Dec 4, 2008 5:44 AM

    This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

    Hi all,
    In advance i`m thankful for your help,
    I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
    SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
    Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
    My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
    I`ve try to sync users... no good
    PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
    -eq $false)
    >> {
    >> $configManager.StartSynchronization($true)
    >> Write-Host "Started Synchronizing"
    >> }
    >> else
    >> {
    >> Write-Host "Already Synchronizing"
    >> }
    >>
    Can someone explain a little bit more about this:
    6.     
    Can they talk to each other?
    Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
    Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
    nslookup command from the SharePoint Server.
    Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
    %systemroot%\system32\drivers\etc\Hosts
    On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
    Start, click Run, and then type cliconfg in the
    open box.
    Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
    Open the SQL Server Configuration Manager (Start SQL Server 2008  Configuration Tools  SQL Server Configuration Manager
    Navigate to the SQL Server Network Configuration  Protocols for MSSQLSERVER node in the tree view
    Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
    Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

    Hiya,
    I don't think it is necessary to reinstall.
    You should just confirm that your basic infrastructure is working.
    1: On the SharePoint server, open cmd and write ping <SQL server name>
    2: On the SharePoint server, open cmd and write nslookup <SQL server name>
    Basically the steps outlined here, is the best way to start:
    6.     
    Can they talk to each other?
    Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
    Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
    nslookup command from the SharePoint Server.
    Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
    %systemroot%\system32\drivers\etc\Hosts
    On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
    Start, click Run, and then type cliconfg in the
    open box.
    Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
    Open the SQL Server Configuration Manager (Start SQL Server 2008  Configuration Tools  SQL Server Configuration Manager
    Navigate to the SQL Server Network Configuration  Protocols for MSSQLSERVER node in the tree view
    Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

  • The external credentials in the SSO database are more recent --- Receiving this error while adding entries to SSO database.

    We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
    error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
    iled unexpectedly.\r
    : error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
    dentials in the SSO database are more recent.\r
     error MSB4018: \r
     error MSB4018:    at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
    ring applicationName, String identifier, IPropertyBag properties)\r
     error MSB4
    018:    at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
    me, String propName, String propValue)\r
     error MSB4018:    at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
    ()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
    askExecutionHost.Execute()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
    cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
    askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
    sult)
    Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010

    Hi,
    This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
    1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
    2. If this does not works, have a look at this
    link
    Hope this will help.
    HTH,
    Sumit
    Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

  • System Failure:-Error while retreiving xml file from database

    I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
    Please help
    Thanks

    I also have the same error. Win2000 Server and MS SQL 2005.
    Maybe someone made request for official information from Oracle about this issue?
    I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know...

  • I got the above error while i restore the standby database using RMAN backu

    Dear All,
    RMAN> crosscheck archivelog all;
    using target database controlfile instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=14 devtype=DISK
    specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
    Help need.i take the backup without catalog database.
    regards,
    DB

    rman> list backup;
    it shows lengthier but i showed only the corresponding
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3479    Full    17G        DISK        01:29:42     09-FEB-13
            BP Key: 3479   Status: AVAILABLE   Tag: 09FEB13_FULL_ESMSRV1_DB
            Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3479
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3480    Full    17G        DISK        01:21:30     09-FEB-13
            BP Key: 3480   Status: EXPIRED   Tag: TAG20130209T200021
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3480
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3481    Full    4M         DISK        00:00:03     09-FEB-13
            BP Key: 3481   Status: AVAILABLE   Tag: TAG20130209T212205
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
      Controlfile Included: Ckp SCN: 1759462488   Ckp time: 09-FEB-13
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3482    Full    0          DISK        00:00:01     09-FEB-13
            BP Key: 3482   Status: AVAILABLE   Tag: TAG20130209T212212
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
      SPFILE Included: Modification time: 08-FEB-13
    ls -l /oradatabkp
    root@drsrv1#ls -l /oradatabkp
    total 1108672
    drwxr-xr-x   2 ovsd       dba             96 Sep 27  2009 alert_bkp
    -rw-r--r--   1 oracle     dba            195 Mar 15  2007 create.sql
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 ctrl_bkp
    -rw-r--r--   1 root       sys        565114880 Apr 24  2007 drsrv1.tar
    drwxrwxrwx   2 root       sys             96 Jun 17  2011 drsrv2-ignitebkp
    drwxr-xr-x   4 root       sys             96 Apr 24  2007 esmsrv1
    -rw-r-----   1 root       sys        1613824 Feb 22  2007 esmsrv1stby.ctl
    -rw-r--r--   1 esmsrv1    dba           5120 Dec 31  2009 esmtables.dmp
    -rw-r--r--   1 esmsrv1    dba            538 Dec 31  2009 esmtables.log
    drwxrwxrwx   4 root       sys           8192 Mar 10  2009 export
    drwxr-xr-x   8 root       sys           8192 Apr 24  2007 finalbackup
    -rw-r--r--   1 oracle     dba           3820 Sep  5  2008 invalid.sql
    -rw-r--r--   1 esmsrv1    dba         303104 Dec 31  2009 kirdevports.dmp
    -rw-r--r--   1 esmsrv1    dba            591 Dec 31  2009 kirdevports.log
    drwxr-xr-x   2 root       root            96 Feb 12  2007 lost+found
    -rw-r--r--   1 oracle     dba          24954 Aug  9  2009 ovcontrol-090909.ctl
    drwxr-xr-x  22 root       sys           8192 Apr 24  2007 ovpi
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 pfile_bkp
    drwxrw-rw-   4 oracle     dba           8192 Feb 10 15:25 rman
    drwxr-xr-x  28 root       sys           8192 Feb  1 17:15 schedbkp
    drwxr-xr-x   2 oracle     dba           8192 Jul 11  2011 sdnnm
    -rw-r--r--   1 esmsrv1    dba           2196 Dec 31  2009 srirdevports.log
    drwxr-xr-x   2 oracle     dba             96 Mar 13  2009 statsreport
    -rw-r--r--   1 oracle     dba            966 Mar 15  2007 tbs.sql
    drwxr-xr-x   5 oracle     dba             96 Mar 16  2007 testov
    drwxr-xr-x   2 root       sys         442368 Mar 11  2009 trendadm_files
    root@drsrv1#ls -l /oradatabkp/rman
    total 37244448
    drwxr-xr-x   2 oracle     dba           8192 Feb 10 15:25 esmsrv1
    -rw-r-----   1 oracle     dba        19068198912 Feb  9 14:21 esmsrv1_full_db_09feb13
    drwxrw-rw-   2 oracle     dba           8192 Feb  9 21:36 openview
    -rw-r--r--   1 oracle     dba         920442 Feb  9 21:37 rmanbkp-all.log

Maybe you are looking for

  • Awk: error while loading shared libraries: libdl.so.2: cannot open shared

    I got the following error awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or direc

  • How to execute a BI query/view from a web dynpro application?

    Hi all, I am trying to connect to a BI system from a Web Dynpro application. I have to execute a view/query and process the output in my application. Please guide me about how to establish the connection to the BI system from my web dynpro applicatio

  • Browse animation effects causing Bridge to freeze

    Every time I select browse effects from the animation menu, Adobe Bridge launches (as expected). When I navigate to the "Text/Blurs" folder and open it, Bridge freezes. I know I can add an effect to my text without resorting to Bridge, but I'm follow

  • Correct procedure to update IOS IPS signatures on 2911 router

    What is the correct procedure to update the IOS IPS signatures on an 2911 router? I know how to download the signatures file (eg. IOS-S556-CLI.pkg) but what is the correct way to install the update? Thank you in advance!

  • Mountain lion finder rearranges my icon files

    I've discovered a bug: Mountain Lion's Finder rearranges my icon files by alphabet when I paste more than one document into a directory.  It happened twice.  Sometimes I prefer visual arrangement in directories. SECOND PROBLEM: I also don't like the