Reg: Error while connecting to a remote database as SYS user.
Hello all,
When i try to connect to a database as SYS user i'm getting the error as
ora-01017 invalid username/password logon denied
But it is logging from the local system where the oracle is installed.
I created the password file and checked the contents in v$pwfile_users.
The result is " no rows selected".
so when i try to grant sysdba to sys user
grant sysdba to sys;
i'm getting error as,
ORA-01994: GRANT failed: password file missing or disabled
Please help me in resolving this.
Regards,
Konda
I created the passwordfile using the command below,
orapwd.exe file=E:\app\Administrator\product\11.2.0\dbhome_1\database\PWDfile.ora force=y entries=30 password=<sys_password>
is this okay...??
Similar Messages
-
Error while Creating form on remote Database
Hi All
I m getting error while creating form on remote database thru
Database link
Line/Column Error
7099/21 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7099/9 PL/SQL: SQL Statement ignored
7749/16 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7749/9 PL/SQL: SQL Statement ignored
and statement at line specified is insert statement. and at end
of insert statement Returning caluse is there as follows
RETURNING ROWID INTO "_ROWID";
This returning clause is causing error. Does anybody knows how
to handel it??
Thanks
YogeshYogesh
I haven't seen the ora-03116 problem.
What version of Portal are you running? Are the databases at the same version? Does your table have longs or anything strange in it?
Can you query the table via the synonyms and link in sqlplus as the application schema? This is a good test because it eliminates Portal.
You should try setting up synonyms etc for the emp table. If you still get the problem then Oracle may be able to replicate it. If not, then there's sth funny about your table maybe.
I agree with Vishnu about creating everything in sqlplus. I create all my links and synonyms in sqlplus. They are all public. I have 2 synonyms: one takes you over the link the other takes you to the right schema. It's flexible and it works.
data database: D grants to P (local schema) on table T
public syn T = D.T (sys) (get the right schema)
portal dbase : public db link to data database connecting as P
public syn T = T@dblink (sys) (over the link)
P is a schema created in both databases.
Test is: P in portal dbase can "select * from T" and gets the right data.
I never, ever refer to a schema when defining a form. ie. never P.T or D.T or whatever. I always refer simply to a synonym. For the above my form would be defined simply on the table T.
Hope this helps
Greg -
Getting error while calling procedure from remote database
When I am trying to call child procedure from remote database I am getting below error:
ORA-02064: distributed operation not supported
ORA-06512: at "NMUSER.NEW_CUST_UPLOAD", line 740
(P.S. on line no 740 I issued "commit;" )
I checked rights,synonym on all the objects they are fine.Oracle Error: ORA-02064
Error Description:
Distributed operation
not supported
Error Cause:
One of the following
unsupported operations was attempted:
1. array execute of a remote update with a subquery that references a dblink,
or
2. an update of a long column with bind variable and an update of a second
column with a subquery that both references a dblink and a bind variable, or
3. a commit is issued in a coordinated session from an RPC procedure call
with OUT parameters or function call.
Cheers,
Manik. -
Noclassfound error while connecting java with oracle database
hi all
the source code metioned below gets compiled. but when it is run
it gives thefollowing error.
ClassNotFoundException: jdbc.driver.OracleDriver
Exception in thread "main" java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:532)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at pract.main(pract.java:16)
import java.sql.*;
class pract
public static void main (String args []) throws SQLException
try
Class.forName("jdbc.driver.OracleDriver");
catch(java.lang.ClassNotFoundException e)
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
Connection conn = DriverManager.getConnection
("jdbc:oracle:thin:@anant:1521:student", "scott", "tiger");
// @machineName:port:SID, userid, pas
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("select * from emp");
while (rset.next())
System.out.println (rset.getString(1)); // Print col 1
stmt.close();
i have included the following driver classes in the classpath
ojdbc.jar,
ojdbc_g.jar,
classes111.jar
but still im unable to connect.
can anyone help me in solving this simple problem.hi ,
you hav not stated which oracle ur using...still if u r using oracle 9i then u hav to include classes12.jar file in ur lib build classpath and then tryout following changes in code....
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
conn = DriverManager.getConnection("jdbc:oracle:thin:@<host>:<port>:<sid>","scott","tiger");
hope this ll help.... -
Error while connecting to Oracle 11gR2 database instance
Dear All,
I installed Oracle 11g R2 on my local machine (laptop) successfully. Using Sql Developer I tried to connect to the instance (ORCL) but not able to connect to the server. Please let me know hw to configure tnsnames.ora, listener.ora, and sqlnet.ora files. I tried to configure those three files using Net manager, but since I am novice, I could not do it..
Here are the details of my windows services related to oracle installation..
OracleOraDb11g_home1TNSListener (started)
OracleServiceORCL (started)
Listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(SID_NAME = ORCL)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(PROGRAM = extproc)
(SID_NAME = ORCL)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc))
ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
tnsnames.ora
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = ORCL)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = C:\app\Administrator\product\11.2.0\dbhome_1\log
As per my guess, entries in tnsnames.ora, and listener.ora are not appropriate. Please help to configure the correct values in those files.
Thanks and Regards
Santosh910192 wrote:
Dear All,
I installed Oracle 11g R2 on my local machine (laptop) successfully. Using Sql Developer I tried to connect to the instance (ORCL) but not able to connect to the server. Please let me know hw to configure tnsnames.ora, listener.ora, and sqlnet.ora files. I tried to configure those three files using Net manager, but since I am novice, I could not do it..
Here are the details of my windows services related to oracle installation..
OracleOraDb11g_home1TNSListener (started)
OracleServiceORCL (started)
Listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(SID_NAME = ORCL)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(PROGRAM = extproc)
(SID_NAME = ORCL)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc))
ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
tnsnames.ora
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = ORCL)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = tgsdl022)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = C:\app\Administrator\product\11.2.0\dbhome_1\log
As per my guess, entries in tnsnames.ora, and listener.ora are not appropriate. Please help to configure the correct values in those files.
Thanks and Regards
SantoshError msg? -
Error while connecting to the database from a JSP Page
Hi,
I am using a simple JSP page which is based on the sample JSP pages from OTN.
When I try to connect to my database using the following code:
InitialContext ic = new InitialContext();
OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
m_connection = ds.getConnection();
I get the following error:
Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
Does anybody know wht this is happening?
Any help would be appreciated
FRankHi Frank,
Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
Ensure the case of the JNDI lookup string, since, it is case sensitive.
Hope this helps.
Abhijeet -
Error while connecting MYSQL Database
Hi,
I use a 30 days trial of Crystal Reports 2008. When i try to connect with the database i always get the next error: [http://www.visiscan.nl/error.jpg]
The database is 4.1GB large and there is 10GB free space on the database.
Anybody can tell me what to do?Hi Tom,
As I understand the error while connecting to database is
u201CFailed to retrieve data from databaseu201D
There could be some could be multiple reasons for this.
If you are using an ODBC connection then try to check the DSN. Recreate the same and then try.
If the database is oracle check if native client is installed and try to ping from the native client to check if it responds.
When connecting to Oracle, ensure that the Service name is identical to that used in the <ORA_HOME>/network/admin/tnsnames.ora file on the BusinessObjects XI Release 2 server.
For ODBC databases, ensure that the ODBC DSN is exactly the same in the ODBC Manager as on the BusinessObjects XI Release 2 server.
Please let us know if this helps
Regards,
Aditya Joshi -
'Connection Description for Remote Database not found' Error
Hi All,
I have an interface that loads Oracle DB from an Oracle source(JD Edwards). It is mostly one to one mapping of the columns, and is utilizing LKM Oracle to Oracle(DBLink), IKM Oracle Incremental Update and CKM Oracle.
I am getting an error when executing the interface which states 'Connection Description for Remote Database Not Found' at the 'Insert Flow into I$ table' step in the Operator logs.
The below is the content of the error:
2019 : 42000 : java.sql.SQLException: ORA-02019: connection description for remote database not found
java.sql.SQLException: ORA-02019: connection description for remote database not found
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.j(e.java)
at com.sunopsis.dwg.cmd.h.z(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Please advice me on the correction.
Many Thanks!Hi All,
I am seeing things are working fine, when I am using LKM SQL to Oracle in combination with IKM Oracle Incremental Update. It is only in the case of using LKM Oracle to Oracle(DBLINK) in combination with IKM Oracle Incremental Update, that the above mentioned error is thrown.
Please suggest on the resolution in using LKM Oracle to Oracle(DBLINK) with IKM Oracle Incremental Update...
Thanks! -
I can't get my itunes to connect to the remote speakers via airport express anymore - I did not change any settings - but did update iTunes to 10.2.2 and now things are not working and I get his message - "An error occurred while connecting to the remote speaker “Living Room”. The network connection failed."
Does anybody have a fix for this problem?
thanksSame problem for me. Ever since I upgraded to 10.6.3 and iTunes 9.1, about once per week I'll get the error message when trying to get iTunes/Airtunes to connect to my older Airport Express (running firmware 6.3) "An error occurred while connecting to the remote speaker <insert speaker name here>. The network connection failed." (No error codes are given.)
Airport Utility sees the offending Airport Express just fine (and there's a green light on said AE).
Curiously, a newer AE-n, elsewhere in the house (running firmware 7.4.2) does NOT exhibit this problem.
Simply restarting the offending AE does NOT clear the problem. Restarting the main router - a Time Capsule DOES clear the problem. Alternatively, toggling off the Airtunes functionality on the offending AE, restarting it, then toggling Airtunes back on, and finally restarting it DOES clear the problem (as an alternate to restarting the router). No matter how the problem is cleared, it returns within a week. It's frustrating that the problem cannot be recreated immediately.
Probably not relevant, but the computer on which I'm running iTunes (a Mac Mini) is connected to my TC via ethernet, not wirelessly.
I've tried the suggestion of disabling ipv6. No effect.
I fear the only solution will be to scrap my older Airport Express and replace it with a newer n-model. But before I resign myself to the $100 fix, any more ideas? -
ITunes - An Error occured while connecting to the remote speaker. (-15000)
I have been using airportexpress for the last 9 months with no problem. I used to use Windows Vista (32bit) to play itunes music and stream the music to the airportexpress which connects to my living room AV system.
Couple of days ago, I rebuilt my machine now running Win7 (64bit). Since then, I am not able to stream the audio to the airport express. Whenever I select the remote speakers, wait for about 30 secs and I get this error : An error occurred while connecting to the remote speakers "livingroom". An unknown error occured (-150000).
Does anyone experience this ? From the same machine, I am able to connect to the airport express using the airport utility. Wireless is working fine. I just not able to stream my music to it.
Regards
Moehadimoehadi, Welcome to the discussion area!
This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes". -
Getting "ORA-12514 error" while connecting first time
Hi,
Getting below error while connecting to the database first time.
ORA-12514: TNS:listener does not currently know of service requested in connect
apludc01dat25:e2cmpc1 > tnsping ora37_ap
TNS Ping Utility for Linux: Version 10.2.0.5.0 - Production on 26-MAR-2012 12:00:58
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/grid/product/crs/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = apl11764clu01-scan-oravip.nat.bt.com)(PORT = 61901)) (CONNECT_DATA = (SERVICE_NAME = ORA37_ap))
OK (0 msec)
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:15 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:22 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL>
Please help me out to resolve this issue.
Thank you.
Regards,
DasarathHi,
We are getting this error while connecting remotely.
PFB output of listener status and services
apl11764a001:ORA37a > lsnrctl services LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:06
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: apl11764a001, pid: 25970>
(ADDRESS=(PROTOCOL=tcp)(HOST=apl11764a001)(PORT=10862))
The command completed successfully
apl11764a001:ORA37a > lsnrctl status LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
STATUS of the LISTENER
Alias LISTENER_ORA37
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 26-MAR-2012 12:15:17
Uptime 0 days 0 hr. 3 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /grid/product/crs/network/admin/listener.ora
Listener Log File /grid/product/crs/log/diag/tnslsnr/apl11764a001/listener_ora37/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_ORA37)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.4)(PORT=62037)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.7)(PORT=62037)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
The command completed successfully
Thank you.
Regards,
Dasarath -
Error while processing message to remote system
Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
RaghavendraHi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha. -
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
SumirThis issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini -
Installing Java Dialog Instance - Error while connecting to DB
We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad DridiHi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat
Maybe you are looking for
-
How can I get my exported pages document to appear the same in pdf?
When I export my document to pdf, the font color for those that I have reversed (white color) appear black and don't show up because the background is black. I've tried exporting my file 10 times and it appears to be different on many occassions. I c
-
Control File Date/Time Field
Hello all, Im using SQL Loader to load a text file into a database table. Im having an issue with one of the fields that contains date and time. Here's what I have: Data: Customer 1|850510|C2117-2972A|2011-07-07 00:00:00|21172972|BA Customer 2|850511
-
Online gaming issue with WRT54G2V1.
Hi I have a WRT54G2V1 (firmware 1.1.01) router hard wired to 4 computers in the house. I have a Siemens Speedstream 4200 Series Modem. I play Mechwarrior IV and I have some connection problems. The MW4 sites say to do the following: Make a static
-
Hi Floks, We are getting core dump and server is getting down. If i can run same program with same variant working couple of times sequentially after that getting this issue. Thanks, Anil.
-
Can connect to computer but window does not show up
We are having issues with Apple Remote Desktop connecting to a couple of servers. Server version varies. It is happening on one server running 10.6.8 and one computer running 10.5.8 and one running 10.4.11 When we connect to the server it appears to