Error While Creating DB link

Hi All,
My OS: Windows Server 2003
DB Version: 10.2.0.1
I created a Public Database Link on my server so that user can access the database using database link. The command i issued is
create public database link 10g_11g_link connect to test identified by “test” using ‘test’;
and database link is created successfull. But when i am trying to connect from user machine to database using database link.
I am getting error as:
ORA-12154: TNS:could not resolve service name
I also make an entry in tnsname file about the user machine ip and service name

>
create public database link 10g_11g_link connect to test identified by “test” using ‘test’;
and database link is created successfull. But when i am trying to connect from user machine to database using database link.Please post actual statement used. I assume/hope that windows curly (aka smart) quotes were not a part of it.
I am getting error as:
ORA-12154: TNS:could not resolve service nameVery likely because the database server, acting as a client on that end of the db link, could not resolve i.e. lookup the connect identifier 'test' by using configured net named method (probably tnsnames).
>
I also make an entry in tnsname file about the user machine ip and service nameWhat entry? In what .ora file?
Please be specific when describing problems - for a better chance of getting specific suggestions/solutions in return.
Edited by: orafad on Dec 8, 2011 8:41 AM
Edited by: orafad on Dec 8, 2011 8:42 AM

Similar Messages

Error while creating WS link on a button

Post Author: rahulsarma
CA Forum: Nsite
I am trying to make a WS link to NSite on a button. But i get this message "Can not save web-service credentials to database. Empty key".

Dear Freind,
Have you assigned the Sales Area to the Document types
T-code : OVAZ.
Also Check the Sales Applications V/c2
Can you double click on the error and See what is the datails of the error appearing?
Regards,
Amlan Sarkar

Error while Updating Enterprise Link Plan in Design Studio

Hi, All
I am getting one Error while Creating Enterprise Link Plan in Design Studio of BAM and Failed to Create the Plan.
i.e.(IMessageSourceReceiver>messageReceive:javax.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found)
Setup:
Integration between Oracle EBS 11.5.10 and Oracle BAM 10.1.3.
I am trying to get the Raw Data and sending over to the Enterprise Link Plan.
1. Created bam_ttq AQ and bam_ttq_tab.
2. Configured all of the startup parameters required for Enterprise Message Source Type (Oracle (AS JMS and OJMS)) in the Administrator of BAM.
3. Configured the Oracle (AS JMS and OJMS) with the following values in the Enterprise Message Sources in the Architect of BAM.
Initial Context Factory : com.evermind.server.rmi.RMIInitialContextFactory.
JNDI Service Provider URL : opmn:ormi://inaportal.inatech.com:6004:home.
TopicConnectionFactory Name : java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab.
Topic Name : java:comp/resource/BAMTTT/Topics/bam_ttq.
JMS Message Type : Text Message.
Durable Subscriber Name (Optional) : Bamclient.
Message Selector (Optional) :
Client ID (Optional) : ClientId.
4. Also configured the data-sources.xml and applications.xml in OC4J (10.1.2) to reference the database schema where the BAM_TTQ queue is created.
5. Modified the jndi.properties file with required properties.
java.naming.security.principal = ias_admin
java.naming.security.credentials = inaportal321
java.naming.provider.url = opmn:ormi://inaportal.inatech.com:6004:home
java.naming.factory.initial = com.evermind.server.rmi.RMIInitialContextFactory
6. In the Design Studio I have a Plan with Oracle BAM Enterprise Message Receiver and Grid.
And when I am updating the plan I am getting the following error.
IMessageSourceReceiver->messageReceive: javax.naming.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:164)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "EBS_Example" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Can anybody pls help me out with this? Its Urgent for Me
Thx
Renuka.
Message was edited by:
Renuka

hi renuka..were u able to resolve this issue with the naming exception....cheers...

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error while Creating form on remote Database

Hi All
I m getting error while creating form on remote database thru
Database link
Line/Column Error
7099/21 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7099/9 PL/SQL: SQL Statement ignored
7749/16 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7749/9 PL/SQL: SQL Statement ignored
and statement at line specified is insert statement. and at end
of insert statement Returning caluse is there as follows
RETURNING ROWID INTO "_ROWID";
This returning clause is causing error. Does anybody knows how
to handel it??
Thanks
Yogesh

Yogesh
I haven't seen the ora-03116 problem.
What version of Portal are you running? Are the databases at the same version? Does your table have longs or anything strange in it?
Can you query the table via the synonyms and link in sqlplus as the application schema? This is a good test because it eliminates Portal.
You should try setting up synonyms etc for the emp table. If you still get the problem then Oracle may be able to replicate it. If not, then there's sth funny about your table maybe.
I agree with Vishnu about creating everything in sqlplus. I create all my links and synonyms in sqlplus. They are all public. I have 2 synonyms: one takes you over the link the other takes you to the right schema. It's flexible and it works.
data database: D grants to P (local schema) on table T
public syn T = D.T (sys) (get the right schema)
portal dbase : public db link to data database connecting as P
public syn T = T@dblink (sys) (over the link)
P is a schema created in both databases.
Test is: P in portal dbase can "select * from T" and gets the right data.
I never, ever refer to a schema when defining a form. ie. never P.T or D.T or whatever. I always refer simply to a synonym. For the above my form would be defined simply on the table T.
Hope this helps
Greg

Error while creating MV replication group object

Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.

Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3         gname => 'GROUPA',
4         qualifier => '',
5         group_comment => '');
6*   END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3         gname => 'GROUPA',
4         type => 'TABLE',
5         oname => 'EMP',
6         sname => 'SCOTT',
7         copy_rows => TRUE,
8         use_existing_object => TRUE);
9*   END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3         sname => 'SCOTT',
4         oname => 'EMP',
5         type => 'TABLE',
6         min_communication => TRUE);
7    END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL>   BEGIN
2       DBMS_REFRESH.MAKE(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => '',
5         next_date => SYSDATE,
6         interval => '/*1:Hr*/ sysdate + 1/24',
7         push_deferred_rpc => TRUE,
8         refresh_after_errors => TRUE,
9         parallelism => 1);
10    END;
11 /
PL/SQL procedure successfully completed.
SQL>   BEGIN
3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5         gname => 'GROUPA',
7         master => 'DB2.wolrd',
9         propagation_mode => 'ASYNCHRONOUS');
11    END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'MYUSER.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'MYUSER',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'SCOTT.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'SCOTT',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora

Oracle.jbo.RowCreateException: JBO-25017: Error while creating a new ROW

I am trying same multi step PO example. I have created a search page and there are 3 other pages for PO Header, PO Line and Review/Submit Page. I am coming on 2nd page(creating Line Item) and when I click on create new item record I am getting this error. Any help will be aprrecaited.
oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for POLinesEO.
This is my code for POLineShipFullVORowImpl.java
protected void create(oracle.jbo.AttributeList nvp)
POLinesEOImpl lineEO = (POLinesEOImpl)getEntity(0);
POShipmentEOImpl shipmentEO = (POShipmentEOImpl)getEntity(1);
try
// Create Lines EO
lineEO.create(nvp);
// Create Shipments EO
shipmentEO.create(lineEO);
// Calling this ensures that any personalization default values are
// properly set since the OAF normally sets this in the super.create(), but
// since this is not called in this workaround, we need another method
// to ensure customer defaults are applied.
// The following method was introduced in OAF internal release 11.5.10J. Since
// the production release of the ToolBox must be able to run on 11.5.10I, this
// cannot be enabled.
// setDefaultValue();
catch (Exception ex)
lineEO.revert();
shipmentEO.revert();
if (ex instanceof oracle.jbo.JboException)
oracle.jbo.JboException jboEx = (oracle.jbo.JboException)ex;
// Developers have to do the mapping on their own becauce of the override.
jboEx.doEntityToVOMapping(getApplicationModule(), new oracle.jbo.ViewObject[]{getViewObject()});
throw jboEx;
throw OAException.wrapperException(ex);
} // end create()
Code for PoLinesEOImpl.java
* Initializes a new purchase order line.
public void create(AttributeList attributeList)
// NOTE: header id is automatically set by BC4J because of the
// composition association.
super.create(attributeList);
OADBTransaction transaction = (OADBTransaction)getOADBTransaction();
// DEFAULT: line id
Number lineId = transaction.getSequenceValue("FWK_TBX_PO_LINES_S");
setLineId(lineId);
// DEFAULT: Line number
POHeaderEOImpl headerEO = getPOHeaderEO();
Number newLineNum = headerEO.getNextLineNum();
setLineNumber(newLineNum);
} // end create()
* Sets <code>value</code> as the attribute value for ShipmentNumber
* Business Rules
* Required; cannot be null
* Cannot be updated on a committed line
* Must be unique for this purchase order
* Must be >= 1
public void setLineNumber(Number value)
if (value != null)
// Verify value is > 0
if (value.compareTo(0) <= 0)
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"LineNumber", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"DEBUG -- add message"); // Message name
// To verify uniqueness, start by checking the entity cache.
com.sun.java.util.collections.Iterator lineIterator =
getEntityDef().getAllEntityInstancesIterator(getDBTransaction());
Number lineId = getLineId();
Number headerId = getHeaderId();
while ( lineIterator.hasNext() )
POLinesEOImpl cachedLine =
(POLinesEOImpl)lineIterator.next();
Number cachedLineNum = cachedLine.getLineNumber();
Number cachedLineId = cachedLine.getLineId();
Number cachedHeaderId = cachedLine.getHeaderId();
if ((cachedLineNum != null) &&
(cachedLineNum.compareTo(value) == 0) &&
(cachedLineId.compareTo(lineId) != 0) && // Exclude this line
(cachedHeaderId.compareTo(headerId) == 0))
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"LineNumber", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"DEBUG -- add message"); // Message name
// Didn't find a duplicate in the entity cache so now we check the database.
// Note: don't bother with this if the header is in a NEW state since that
// means we won't have any lines in the database yet.
POHeaderEOImpl headerEO = getPOHeaderEO();
if (headerEO.getEntityState() != STATUS_NEW)
PurchaseEntityExpert poExpert =
POHeaderEOImpl.getPurchaseEntityExpert(getOADBTransaction());
PoLineNumVVOImpl valLineNumVO =
(PoLineNumVVOImpl)poExpert.findValidationViewObject("PoLineNumVVO1");
valLineNumVO.initQuery(headerId, value);
// We're doing an existence check; shouldn't have any rows.
if (valLineNumVO.hasNext())
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"LineNumber", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"DEBUG -- add message"); // Message name
// If this is the largest line number for this order, this will store it for
// reference when creating subsequent lines.
headerEO.resetLineNum(value);
setAttributeInternal(LINENUMBER, value);
} // end setLineNumber()
Edited by: user9941374 on Mar 15, 2012 3:16 PM

Hi Frank,
As per the steps mentioned in the following link :
http://www-apps.us.oracle.com:1100/fwk/jdev/doc/devguide/bus/bus_java.htm#tl
I have created the required entity objects and view objects.
I have an entity JobsDEO which is based on a view per_jobs_vl which is itself based on 2 tables,per_jobs_f and per_jobs_tl,wherein _tl is the translation table.
The entity for _tl table is JobTranslationEO and has no VO associated with it.Its the JobsVO,based on JobsDEO,that has to handle any interactions with this entity too.
JOBSDEO has a property set up for HCM_DBSEQUENCE,which makes it read the value of job_id from the sequence per_jobs_s.
Now,when I try to insert into the JobsVO,based on JobsDEO,it gives me the above mentioned error.
One more thing is that the error does'nt occur when we commit a row,its just when we click the "+" button in the AM Tester that we get this error.
Please advice.

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Error while creating a view

Hi All,
I am getting the below errors while creating view.
ORA-03135:connection lost contact
ORA-03134:not connected to ORACLE
Please suggest. Thanks
AJR

check this link... even this can also be a reason
Ravi Kumar

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Error while creating inbound delivery

Hi All,
I get an error while creating inbound delivery from ASN
"Error during conversion of unit of measure: UoM is missing -> ST BOR131
Please help solve this issue.
Thanks in advance
Regards,
Thiru

hi,
please maintain the uom for tour material.
or
reffer this link
Alternate Unit of Measure Conversion Rule Error
/thread/2000551 [original link is broken]
Thanking you.

Error while creating OLAP connection in IDT

Hi friends,
I am facing error while creating OLAP connection in IDT (BO 4.1 sp2)
I am using sql server 2012.In the screen shots you can observe server name and user name of the Sql server
I am creating OLAP connection to connect CUBE
Check the screen shots for the error
Plz help me
Here you can see the server name and user name
While creating OLAP connection I gave these credentials
This is the error I am getting

Hi..
To create connection and access the BW data, developer must have the password. and while create connection using Authentication Mode: Single Sign On, need to loin the username has pattern <SID~client/SAP userid>,
User Name: SID~client/SAP userid
Password for the SID,
Authentication as SAP.
Plese find the below link for more info: http://scn.sap.com/community/semantic-layer/blog/2014/06/19/pre-requisite-authorizations-in-sap-bw-side-before-develop-the-universe

Error while creating table 'EDISEGMENT' entry for Transfer Structures

Hi Guyz...
I've been facing a few issues regarding activation of transfer structures.
I'll explain the whole process...so it makes sense to you guys.
I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
I hope, I am clear here.
Any suggestions, guys...
Thanks,
Regards,
G

Hi,
Please check this link:
Error while creating table EDISEGMENT entry
Hope it helps.
Thanks and Regards,
MuraliManohar.

Error While Creating DB link

Similar Messages

Maybe you are looking for