Error while creating I/B delivery: No item category exists (Table T184L EL)

Hello all,
When I save output type "SPED" in outbound delivery, Inbound delivery automatically gets created.
But in this case error occured:
"No item category exists (Table T184L EL NLAG V )"
1. Specified material is HALB.
2. Item Cat in MMR is NORM
3. in Table T184 for "Delivery item Category Determination", configuration for EL NLAG V is NOT exists. But EL NORM V is exists
4. Testing for the SAME material in Test server is PERFECT. I/B delivery created automatically. Master data in Test system is replica of Production system.
Then where is the wrong....????
Could any one help on this?
Thanks
Tushar

Please have a look at your material. In material master there's a so called item category group (MARA-MTPOS_MARA and MVKE-MTPOS; these are on sales 2 view).
Please compare the value in this field in the materials used in test (NORM?) and production system (NLAG?).
This is one factor in item category determination as you can see in table T184L.
Edited by: Csaba Szommer on Jul 19, 2010 2:18 PM

Similar Messages

Error :Inbound Delivery "No item category exists (Table T184L DIG NORM V )"

Dear Guru's,
When I try to create an inbound Delivery for an SA i am getting the following error "No item category exists (Table T184L DIG NORM V )" . My problem is, it suppose to look for Delivery Type: EL instead of DIG. I dont know why its look for DIG, can some one point where i am making the mistake?
I am sure that i should be looking for Delivery Type : EL and Item Category : ELN (for Delivery)
Please advice...
Regards,
Kumar

Dear Kumar ,
Please check the itemcategory determination for the delivery type DIG in 0184 transaction for combination.
Delivert type+Norm -
>Itemcategory
For Example :- DIG + NORM---->DIGN
I hope this will help you,
Regards,
Murali.

Error in GR(No item category exists (Table T184L HID V ))

Hi,
While doing GR for stock material the below error appears
No item category exists (Table T184L HID V )
Please help.
Urgent.
Points will be rewarded.
Regards

Hi,
Sales View not there for the Material.
Material Type is HIBE.
While posting MIGO,below before saving 'DELIVERY BEING PREPARED' appears then the above error appears.
Please reply.
Regards

ERROR : No item category exists (Table T184L LB VERP )

There is a error log "No item category exists (Table T184L LB VERP ) " when i try to create outbound delivery to subcontractor vendor via TCode ME2O.
I already add item category LB VERP via TCode 0184, but it still error.
Could anyone help me please
Thanks & Best Regards,
Saiful arif

Hi Arif,
Did you define delivery item category for LB VERP record in transaction 0184?
Regards,
Csaba
Edited by: Csaba Szommer on Oct 28, 2008 10:32 AM

No item category exists (Table T184L HID V )

HI ALL
GETTING THIS ERROR WHEN CARRYING OUT MIGO FOR INBOUND DELIVERY.
PLEASE GUIDE
REGARDS
REDDY

Dear Thaman,
Kindly go through the following links
Error in GR(No item category exists (Table T184L HID V ))
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/error-while-posting-gr-933507
hpoe it will help..
Rgds,
Kareena
Edited by: Kareena Kapoor on Apr 14, 2010 2:08 PM

No item category exists (Table T184L HOD V)

Hi,
When I'm trying to reverse a goods receipt for a PO I'm getting the error as follows.
No item category exists (Table T184L HOD V)
Message no. VL320
Diagnosis
There is no item category available in item category determination in the delivery (table T184L) for the following entries: HOD V
System Response
The system does not allow further processing of this item.
Procedure
Specify the appropriate item category for the above mentioned entries or inform your system administrator.
This is a WM and HU managed scenario. Please advise how to overcome the error
Regards,
Ashwin

You are receipting goods through inbound delivery right ?.Please maintain below missing configuraion against your delivery type.
SPRO>Logistics Execution>Shipping>Deliveries>Define Item Category Determination in Deliveries.
Maintain here HOD V then you can do receipt.

Error while doing GR 561 - No item category exists (Table T184L DIG WMPP )

Hi,
I am doing 561 to Finished goods St loc which is WM enabled and getting the above error.
Question - I don't have authorization to check or change the item category. How do I receive goods to this St loc? I tried transfering stock from another location, but system does not allow that as well.
While doing 561, system creates an inbound delivery in the background. At that time it checks for item category and fails.
Any way I can post stock to this st loc?

561 movment is only to be used for stock load at GO-Live date, not beyond, as its offset account is usually an account that is specially defined for initial inventory postings.
Can it be that you are using decentralized WM (because of the inbound delivery) ?
Without customizing you are not able to sove that problem, except you are using movement types that are allowed and setup well.
Maybe you should explain why you think that you need to add stock with 561´

In MIGO I have error."No Item Catagory exists Table T184L HID NORM V)

Hi
Stuck in MIGO , Po created with and while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
I am using Retail , maintained Item catagory group but still I am facing with this error ..

Resolved the issue with 0184

While processing MIGO "No Item Catagory exists Table T184L HID NORM V"

Hi
Stuck in MIGO , Po created with and while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
I am using Retail , maintained Item catagory group but still I am facing with this error ..

Issue Solved with T Code 0184
Edited by: SHESAGIRI.G on May 10, 2008 2:56 AM

Error while creating purchase order with account assignment category "A"

Dear All,
At the time of creating purchase order with account assignment category A - Asset its throwing error as " GL Account 123400 can not be used"
how to resolve this issue"
Edited by: Matt on Sep 16, 2010 10:09 AM - removed bold tags

HI,
Assign all assets GL to Asset Class
spro --> financial accounting new -->assets accounting --> assets accounting (lean Implementation) --> organization structures --> Assign GL
Hope Help U !
Regards,
Pardeep Malik

Error while creating a hyperlink for a field in a table view

Hi all,
I have created a table view to display the lead information.Now i wanted to make the lead number to be made as a hyperlink.I have tried the delow code
<htmlb:tableView id = "tvX"
headerText = "Leads Details"
headerVisible = "true"
design = "alternating"
visibleRowCount = "5"
visibleFirstRow = "<%= firstvisiblerow %>"
fillUpEmptyRows = "true"
onHeaderClick = "MyEventHeaderClick"
onRowSelection = "select"
selectionMode = "singleselect"
table = "<%= activities %>"
iterator = "<%= z_it %>"
sort = "SERVER" >
<htmlb:tableViewColumns>
<htmlb:tableViewColumn
columnName = "object_id"
type = "link" >
</htmlb:tableViewColumn>
</htmlb:tableViewColumns>
</htmlb:tableView>
But am getting the following error whlle am activating the code
Internal error occured during runtime generation
of Class CL_O2D59X6KFES8AMMPAFQ6AV1R3WF (Dump ID:
DBIF_REPO_SQL_ERROR).
When i remove the code for <htmlb:tableViewColumns> this error does not exist
Can canyone help me in solving this?
Thanks

Hi,
in iterator method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
you need to call method cl_hrrcf_iterator=>get_bee_link to define the link for a specific filed.
for example check the below code.
IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
CASE p_column_key.
    WHEN 'PERNR'.
    CALL METHOD cl_hrrcf_iterator=>get_bee_link
        EXPORTING
          p_cell_id       = p_cell_id
          p_onclientclick =link_url
          p_column_key    = p_column_key
          p_row_data_ref  = p_row_data_ref
          p_tooltip_alias = l_alias
        IMPORTING
          po_bee          = p_replacement_bee.
    ENDCASE.
endmethod.
vijay

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

Error while creating a column in master

Hi all,
I am using the sap business one 8.8 version.
I am getting an error while creating a user defined column for a master table.
The error code is -104.
The method I had used for creating a master table is as follows.
*#region Create Table*
        public static bool CreateTable(string TableName, string TableDescription, SAPbobsCOM.BoUTBTableType TableType, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
            SAPbobsCOM.UserTablesMD oUserTableMD;
            int intRecCode;
            bool boolResult = false;
            oUserTableMD = (SAPbobsCOM.UserTablesMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables);
            try
                if (!oUserTableMD.GetByKey(TableName))
                    oUserTableMD.TableName = TableName;
                    oUserTableMD.TableDescription = TableDescription;
                    oUserTableMD.TableType = TableType;
                    intRecCode = oUserTableMD.Add();
                    if (intRecCode == 0)
                        boolResult = true;
            catch (Exception e)
                oApplication.MessageBox(e.Message, 1, "Ok", "", "");
            finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTableMD);
                GC.Collect();
            return boolResult;
        #endregion
==================================
The following is the code for creating a column in the above master
private static void AddField(string TableName, string ColumnName, string ColDescription, SAPbobsCOM.BoFieldTypes FieldType, int Size, SAPbobsCOM.BoFldSubTypes SubType, string ValidValues, string ValidDescription, string
SetValidValues, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
int intLoop;
            string[] strValue, strDesc;
            SAPbobsCOM.UserFieldsMD oUserFieldsMD;
            SAPbobsCOM.Recordset oRecordSet;
            oUserFieldsMD = (SAPbobsCOM.UserFieldsMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields);
            oRecordSet = (SAPbobsCOM.Recordset)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
            try
                oRecordSet.DoQuery("SELECT COUNT(*) FROM CUFD WHERE TableID = '" + TableName + "' AND AliasID = '" + ColumnName + "'");
                if (Convert.ToInt16(oRecordSet.Fields.Item(0).Value) == 0)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                    oRecordSet = null;
                    strValue = ValidValues.Split(Convert.ToChar(","));
                    strDesc = ValidDescription.Split(Convert.ToChar(","));
                    if (strValue.GetLength(0) != strDesc.GetLength(0))
                        throw new Exception("Invalid Values");
                    oUserFieldsMD.TableName = TableName;
                    oUserFieldsMD.Name = ColumnName;
                    oUserFieldsMD.Description = ColDescription;
                    oUserFieldsMD.Type = FieldType;
                    if (FieldType != SAPbobsCOM.BoFieldTypes.db_Numeric)
                        oUserFieldsMD.Size = Size;
                    else
                        oUserFieldsMD.EditSize = Size;
                    oUserFieldsMD.SubType = SubType;
                    oUserFieldsMD.DefaultValue = SetValidValues;
                    for (intLoop = 0; intLoop <= strValue.GetLength(0) - 1; intLoop++)
                        oUserFieldsMD.ValidValues.Value = strValue[intLoop];
                        oUserFieldsMD.ValidValues.Description = strDesc[intLoop];
                        oUserFieldsMD.ValidValues.Add();
                    if (oUserFieldsMD.Add() != 0)
                        UpdateLastErrorDetails(-104, oCompany);
            catch (Exception e)
            { oApplication.MessageBox(e.Message, 1, "Ok", "", ""); }
            finally
                if (oRecordSet != null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                    oRecordSet = null;
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD);
                GC.Collect();

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

*Error while creating Trave Requset through ESS*

Hi,
We are getting following error while creating request through ESS:
Entry not found in table T706V. Argument: 40P IN 0010120090608
The estimated travel amounts could not be determined
Errors have been discovered when checking the Expense Report. Please correct them in order to proceed.
Whereas we have already maintained entries in the same table.
Please reply urgently...
Thanks
Neha

Hello,
The solution is documented in Travel Wiki:
https://wiki.sdn.sap.com/wiki/display/ERPHCM/Entrynotfoundintable+T706V
Regards,
Raynard
Edited by: Raynard Coscolluela on May 8, 2009 10:53 AM

Error while creating I/B delivery: No item category exists (Table T184L EL)

Similar Messages

Maybe you are looking for