Error while creation financial document while cancellation

Dear all,
After reversing the invoice, the financial accounting document is not getting saved. It is giving error message to select a particular number range. But after this invoice a few more invoices were reversed and the system has not issued any error messages and financial document also has been generated successfully. Now I want to debug the program to check what could have went wrong while generating this particular invoice with the error message.
Request you to advice me when exactly does the system assigns the number internally to the financial document to set the break point at that level and hence probably will be able to resolve the issue. I have tried to take the help of my abaper but am unsuccessful in finding out the error. please do the needful.
Thanks,
Andy.

Dear Ahemmed,
The error message is pasted below
VF11 is the T-code used for cancellation of the invoice.
And for document type RV, please find the screen shot below
For reverse document type VR,
Thanks,
Andy

Similar Messages

"Error loading BASIC for document" while saving (solved)

In case someone else has this problem here's my solution.
I have a network (Netware 6.5) installation of SO7 (WinXP and 98).
My PC's have harddrives that are protected by Deep Freeze.
I start the Quickstart from a Run entry in the registry.
Starting with PU5, the first time I save a document I get 10-15 "Error loading BASIC for document...". After clicking OK on all those the document is saved and everything works fine. If I close SO and and reopen it everything works.
Rebooting the PC and trying to save a document gives me the error again (since Deep Freeze reset whatever change was made when I clicked through the error messages).
After some hours of debugging I noticed that when the quickstart icon pops up in the systray a new directory named __basic_60 is created in the user directory of the client installation. Removing that prior to starting Write or Calc made the saving error dissappear.
My workaround solution is to remove the gid_Procedure_Rename_Basicdir procedure and it's reference in gid_Module_Root in instdb.inf that's located in the program directory of my network install.
However it must be a bug that the __basic_60 directory isn't removed as default, right?
- Peder

Dusty wrote:I deleted ~/.openoffice2 and it fixed the issue on reconfiguring it.
If deleting the .openoffice.org2 directory is a bit drastic for you, you can fix the problem by going into ~/.openoffice.org2/user/basic and editing the dialog.xlc and script.xlc files. You need to remove the line at the end that says WebWizard in both these files.
That will get rid of the two error messages you are likely getting.
Btw, anyone else miss the Projects functionality in Kate? Darn stupid sessions. Oh well...

Financial Document check Not OK

Hi All,
We are using Letter of credit to approve the credit checks in the orders. We have two sales organizations. When we use the Financial document no for the normal sales for one sales organization, while saving the order the error is coming Financial document is not OK. and the error details says Last confirmed schedule lines date is checking with the Goods Issue date in the Order at item level.
But while using other sales org (Only for Intercompany sales ), While saving the Order it gives the same error Financial document check was not Ok but in the error details Last confirmed schedule lines date is checking with the Req delivery date at header level.
Ideally it should check with the Goods Issue date.
My question here is why its checking Req delivery date instead of Goods issue date? Is there any place or Customization where i can check based on the sales orrganization?
Kindly provide me any clues for the same...
Regards,
SK

Hi
Check in VX52 for configuration of LC
regards
SAP KPIT

Status of Financial Document

Hi All,
Can we change the Financial Document Status to "C" (Notification that document has been sent) after the status of that financial document was set to "E" (Change in document has been submitted) ? And how to do that ? Or we must create a new Fin Doc ?
Because one of my user want to change back the status of a fin doc.
Thank you

Hi Rudy,
Not sure if following references could help or related to your case, but you could try it out to see how the effects.
Setting the Status of Financial Documents
Use:
A financial document's status controls whether it is available for use in sales orders. For example:
Status to B 'Document is incomplete' means that you still need additional information for the financial document
Status D 'Document is available and can be used' means that the financial document can be assigned to sales orders
Status E 'Change in document has been submitted' means that the document cannot be assigned to a sales order until you change its status to D
Prerequisites
The status of a financial document is protected by an authority object. You can configure the authorization object to allow several users to create, change, or display financial documents while allowing only one or a few users to maintain the documents statuses. Only users assigned activity 36 (extended maintenance) for this authority object have permission activate a financial document.
You can also configure the SAP System to require two people to activate a financial document. This configuration helps ensure that the financial document data is double-checked before it can be used in the system. Maintain the double-check feature in Customizing for Sales and Distribution. Choose Foreign Trade/Customs ® Documentary Payments ® Basic settings ® Define Indicators for Financial Documents. Select a Financial Document Indicator and then Goto ® Details. Select Double-check on under Extended confirmation control.
Procedure
Go to the Cockpit for Documentary Payments.
Choose Maintain financial documents.
On the Status tab, select a status.
If you want to activate the document, choose status D (Document is available and can be used).
Save the financial document.
See also:
Maintenance of Financial Documents
Regards.

Payment terms in Financial Documents

Hi all,
There is a provision for entering payment terms in Financial documents while creating through VX11N. What is the purpose of it?
Can these payment terms be defaulted in the sales order while linking the financial docuement?
Regards,
Ajit

Hi ,
These payment terms gets defualted from the master record thus gets flown into subsequent documents. Any way you can over write them in sales orders/ invoices /financial docs.Master records have separate areas for Financial Accounting, Sales, and Purchasing. You can specify different terms of payment keys in each of these areas. When you then enter a business transaction, the application in question will use the key specified in its area of the master record. Kindly please let me know if you need any more information on this.
Regards
Ram Pedarla

Error encountered while attaching a document in an appraisal

Hi Experts,
Good day. I have enabled or allowed an attachment to be included in an appraisal but I am getting this error while attaching a document "Read error during PC upload (header of the pop-up box), Include file in PC application Try Again? Yes / No / Cancel (message contents)". Any inputs as to why I got this error? I also checked table T77S0 for GENER/OBJSV and it shows with the value of 1 meaning it is activated, right? One more thing, do you also have an idea as to why I am getting this warning message for the description of the appraisal template: "You have maintained a description that is not displayed." It allows me save but I just want to know why this happens and what do I need to do for it not to appear because the client may get back to me and ask the same thing. Any inputs will be greatly appreciated. Please help.
Thanks in advance,
Arvin

did you install jacob ? with the correct version number described in the installation-guides.
jacob is not an oracle tool, which normally is only useful for COM-commands against windows.
What did you do with the image?

Error while reversing mat document

Dear all,
While reversing material document i am getting error as "Reverse the availed CENVAT credit before cancelling excise invoice."
How i should proceed?
Naren
Edited by: Narendra Khedekar on Oct 5, 2010 10:50 AM

Hi,
Cancellation of excise invoice process as below.
1) Cancel the material document in MIGO
2) Post the excise invoice in J1IEX
3) Cancel the excise invoice in J1IEX
4) Perform MIGO again if required.
If try to cancel without canceling GR documents through J1IEX or J1IH (CANCEL OPTION) you will get an error as Excise invoice has been already posted
Cancel GR document
Post excise invoice - J1IEX while posting under miscellaneous tab enter Rej code 0001
Cancel Excise invoice u2013J1IEX
Cross check the entries in J2I9 - You can see credit entry which were already taken credit & the second entry of cancelled/reversed. Hope this helps you.

Error while creation of web service model in web dynpro

Hi,
I am getting following error "no services available or local server not accessible" while creation of web service model.
I have already created my web service nad deployed it. It was deployed successfully.
In the web service model creation wizard I am not able to see neither my web service nor any other standard service.
Regards,
Anubha Pandey

Are you using the deprecated Web Services model or the new adaptive web services model?
Take a look in this document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7

Error while creating billing documents

Hi,
While creating billing documents I am getting error message as
Maintain customizing for excise and series group determination
Message no. 8I619
I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
regards,
zafar

Hi,
Check once again customizing
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Thanks
Chidambaram

Error While Releasing Accounting Document & Proforma Invoice--URGENT

Dear Gurus,
I am facing problem in below cases.
-- Proforma Invoice canot be cancelled ....If i need to cancel then wht needs to do
-- I created New Material Master again old material and made sale getting Acc determinatin error while releasing accouting document.. But in old cases( old material) no problem like this. Y like this.
Pls guide me.
Regards,
Venkat

Dear All,
Thanx your kind replies. I analysis and foud following:
Access       Message                    Description
05       123                    Access ZKOF not carried out
Access     Complete
Field Condition Table          Value in Doc
Chart of Accts          CAIN
Sale Org                          1000
Plant                           F201
AccAssg Grp          01
Acct Assgn. Grp          05
Account Key          !! ( Showing Yellow Indicator)
Above things showing Against Condition TYpe JEXT.
I checked in Pricing procedure and condition Type JEXT....against this no Accounting key assigned.
No problem faced earlier...now showing like this........y.
Regards,
Venkat

Error as Enter while creation of PO due to this PO is not created in ME21N

Hi All,
I have an issue where one of my user cannot able to create a PO with refernce to Network and he is getting error as ENTER while creation of PO in ME21N and there is no long text for this error.Also user cannot able to create a PO whenever he clicked on save button the only option he got is Hold or Edit or cancel.
I have asked user to provide the same information (inputs while creation of PO in ME21N) to his colleague and check whether he can able to create a PO successfully or not. User confirmed that his colleague can able to create a PO successfully.
Please let me know what was the root cause behind this.
Awaiting for your valauble inputs & quicker reply.
Note: I have crossverified with technical team and they confim all the required roles are in place for my user.
BR // Kumar.S

Hi Jurgen,
Question from you
Just message ENTER is pretty unusual. Even if there is no long text, the message should at least have a message number, can you tell this number? In general there should be the field name next to the message.
Answer from me
As you have said i have cliked on the error ie ENTERand got the message number as below,
Enter
Message no. ME083
Question from you
Is there any userexit which may cause this error?
Answer from me
According to me know because only one user is having a problem other users can able to create a PO sucuessuflly.
Question from you
What happens if a different user enters the PO under the user ID of the user who can only hold the PO?
What happens if the effected user creates the PO under the user ID of a different user (who is usually able to save POs)?
Answer from me
not tried will let u know on this later
Question from you
Have you customized a new process, and this user is testing it?
Answer from me
No
Please let me know whether the above my inputs help you to identify the issue where exactly it was.
BR // Kumar.S

Error message "update was terminated" while cancelling the billing documen

Hi Experts,
Kindly can you advise on the following issue. We are getting the error message "update was terminated" while cancelling the billing document using transaction code VF11.
Note: The accounting document associated with the billing document is not posted and also note that we have done a check with the Basis team who has confirmed back stating they are seeing the udpate error for the user " ". The log says that the update was terminated because the user was trying to enter some duplicate records into the database.
We could observe that the cancellation document is not created and also we have confirmed with the FI that they still continue to have the billing document open in the customer balance statementu2026
Thanks for your help,
Mithun

HI Mithun ,
Check if that billing document is there in VFX3 . If it is there then try to clear it from there and then try to reverse it.
Hopefully it will be done.
Regards,
Nikhil

An error has occurred in the system DV1CLNT400 while copying the document

Hi All,
While creating complaint confirmation i am getting below mentioned Errors in ECC.
Can any body provide configuration settings.
An error has occurred in the system DV1CLNT400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
No operating concern has been assigned to controlling area 1001 (Notification E KE 300)
Error occurred during determination of profitability segment (Notification W IAOM 025)
Error occurred during creation of settlement rule (Notification I IAOM 046)
Regards,
Teja

Hi,
From the nature of Error messages, it looks like these are related Customization settings. As you mentioned your SAP CRM system is connected to SAP ERP system, so Controlling documents and other account postings are happening there.
So, the best approach will be to get in touch with your functional consultant who will be the best person to guide you with the scenario and the respective process setup. You can also have a look at SAP HELP about the integration of the CRM and ERP systems along with the data exchange.
Hope this will help.
Thanks,
Samantak.

Error while creating delivary document

Hi
i got error while creating delivary document
"Delevivary documents could not be created"
Thanks&regards
kishore kumar

Hi Kishore,
Please check the sales order is this relevent for the delivery or not.
Check the copy control settings between your sales document type and delivery document type in VTLA transaction.
Check the incompletion log for the sales order.
I hope it will help you,
Regards,
Murali.

Error while signing a document using API

Hello. I'm using API functions to add a digital signature to a PDF document. While signing this document, I receive an error which looks like:
com.adobe.livecycle.signatures.client.types.exceptions.PDFOperationException: ALC-DSS-303-001 Could not sign Signature Field MyField (in the operation : sign)
Caused By: ALC-DSS-303-014 Subject name and the subject alt name missing. (in the operation : getSignerName)
My source code is a straight copy/paste from the SDK Help. I can successfully add an unsigned signature field using API call, but I can't sign it. I can also sign my document manually from Adobe Acrobat Professional using the same certificate.
I'm new in LiveCycle and digital signatures, so it might be some obvious reason that I just can't detect now.
Could anyone help me, please?

you can mail me directly to [email protected], and I'll try to help.
no guarenty :-)
Tal
[email protected]

Error while creation financial document while cancellation

Similar Messages

Maybe you are looking for