How to write data from query into Real time cube?

Hi All,
Can anyone explain me step by step how to write data into a real time cube from front end queries.
Thanks in advance

Hi
You can do this using Integrated Planning
You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Regards
Ravi

Similar Messages

How to load data from Quikbooks into PeopleSoft General Ledger module ?

Folks,
Hello.
My client's data is currently stored in Quikbooks.
After install PeopleSoft FSCM 9.0, I need to load the data from Quickbooks into PeopleSoft General Ledger module. But I don't know how to use PeopleSoft Integration Broker to integrate with Quikbooks.
Can any folks tell me how to load data from Quikbooks into PeopleSoft General Ledger module ?

Hi,
If the data load is one time process, then you can use PL/SQL or datamover to load the data to PeopleSoft application.
If you want to load the data in real time, then you need to create In-bound and out-bound nodes to perform the transaction.
Thanks
Soundappan

How to write data from planning folder into a planning cube in BPS

Hi All,
I have an issue in writing data from planning folder to planning cube.
I updated the excel sheet in planning folder in UPSPL tcode.
After clicking on save button in the excel sheet the data did not get updated into the cube.
I set the real time cube to planning mode.
Please let me know if there are any settings to save the data to cube or how can it be done.
Thanks in advance.
Regards,
Lavanya.

Hi Lavanya,
What do you mean by "the data did not get updated into the cube" ?
Don't you find a yellow request in the cube administration transaction ? What happened if you set it to green ?
Regards,
Fred

How to populate data from table into datagrid in form

hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

How to save data from form into database

i nid to save data from form into the new table, @abc.
got any idea ?
smtg like oObj = BaseAddOn.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes) this but it is a new object or user data source.
Thanks

hi
i have created UDO i have also done registration i want to bind item master completely to matrix and then in one column i will set check box to check unchecked and then i want to save it to database
i have one user defined form and 4 matrix and 4 child tables
for each matrix i have given 1 form and i have to transfer the data from temp form to main form matrix having large data in matrix on temp form to main form matrix
to load data on matrix i have used for loop that i want to avoid so how i can bind large data to matrix without for loop
regards
amey

How to write data from Basic Cube to Transactional Cube

Hi experts,
My problem is the following: I have a Transactional Infocube (IC1) and a basic Infocube (IC2). They have both the same structure. IC2 is loaded with data and other data is keyed in IC1.
I would like to write data from IC2 to IC1 and eliminate data redundancy if there can be some.
Can anyone tell me how I can do that?
Thanks in advance

Hi,
Yes , you have to create a multiplanning area ..
In the planning level , filter the value which you want to copy from basic to transactional cube .
Fields to be changed : Planning area and others as per your need..
Field for condition : if you want to copy data from 2006 then give calyear as field for condition.
Parameter group : give the value 'from' as basic cube 'to' as your transactional cube ..

How to insert data from site into DB?

Hi
Does anyone know how to insert data into a database from a
website?
I have created a Registration form for users to register to
my web site. With this I would like the data they have entered to
be stored in a MySQL database. I have created the a form and used
the record insertion form wizard.
When they have registered, I need to be able to check their
username every time they log in.
If anyone could help, it would be greatly appreciated,
thanks Lou.

LoobieLouLou wrote:
> When I inserted a form, I enetered a name and the method
was POST, but it also needed an action.
> How do I write in java script that it needs to be
inserted into the database?
You can't do it with JavaScript. You need to use a
server-side language
like ASP, ASP.NET, ColdFusion, or PHP. Dreamweaver automates
a lot of
the process for you, but you need to choose your server model
first.
It sounds as though you are completely new to this. First ask
your
hosting company whether it supports a server-side language,
and if so,
which one. Then open Dreamweaver help (F1) and read the
section titled
"Preparing to Build Dynamic Sites".
Working with server-side languages and databases isn't
difficult, but
it's not something you can pick up in five minutes or be
shown how to do
in a couple of forum posts.
If you can't make up your mind which server-side language to
use,
ASP.NET is the most difficult of the four I mentioned. ASP is
popular,
but is no longer actively developed, so will eventually die
out
(although it will take many years to do so). ColdFusion and
PHP are
relatively easy to learn. I prefer PHP, but all of them do
basically the
same thing. However, you must choose one; they cannot be
mixed.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

How to push data from BW into SAP R/3 system???

Hello,
We have faced a problem. We need to push compressed sales data from BW to SAP R/3 system. But We don't know how to do it.
Does it exist the standard instruments for it (without ABAP development)?
How to integrate BW and SAP system?
We will be much obliged you for your recomendations and advices.

Hi Igor,
I'm not aware of any standard out of the box mechanisms for moving Sales data back into SAP ERP. There are some delivered "retractors" for business scenarios like financial planning and consolidations where updated data is sent back to SAP ERP in a closed loop scenario. These retractors have been written in ABAP.
I would suggest that you search the latest BI content to see if there is anything for sales data retraction. There might also be information in SAP note on how to do this in code.
To send data from BI, you can also use the 'open hub' feature to extract the BI data to a DB table or file for example. This could then be read by a program to load SAP ERP. The loading would have to be custom development.
Sorry I can't help you more - I fear you will most definitely have some custom development in this case.
Cheers,
Mike.

How to write data from 24 bit card DAQ card unscaled

Hello
I have a PXI 4462 Data acquistion card to record data. It is 24 bit card. I have two questions about writing data from this card.
1) When acquiring the analog signal the card changes the analog to digital and when writing it scales back to analog signal. I want to write the analog signal in the digital form. How can i do that.
2) PXI 4462 is a 24 bit card, but there is either 16 bit or 32 bit when writing it. So if i write it in 32 bit a byte is not used. only 3 bytes will be used to write the data and one byte wont have any data in it. It takes space on the hard disk. Is there any way to save this one byte so that I will be able to write just 24 bit data without loosing that one byte which would save me plenty of space.
The sampling rate is usually 96Ks/sec.
Thanks in advance
Regards
Nitin

If you want to write 24 bits instead of 32, then you have to change the hi(x) to 8 bits instead of 16. The lo(x) will stay at 16 so the 8 plus 16 equals 24 bits. Simple arithmetic. You asked how to get rid of the upper 8 bits and if you leave it at 16, then you haven't gotten rid of anything.
Why do you think you have to write to separate files? I said do a write of the 16 bit and then a write of of the 8 bit component. It's just two Write File functions to the same file. You could also bundle them together and do a single write but I think there would be a little additional overhead with that.
Message Edited by Dennis Knutson on 04-06-2006 07:15 AM
Attachments:
write binary.JPG ‏5 KB

How to Retrieve data from database into another form ?

Good Day!
Am currently new at JSP. I've been studying it for awhile and still getting the hang of it. We are working on a project.
Editing a given data. We have to retrieve the given data and post it to another form "Editing form".
Since we can retrieve data using JSP but how are we going to post it to another form? I mean how are we going to transfer data from one form to another?
Can anyone help me with codes please..

The client is a web browser.
The client submits a request (click a link, visit a form)
The server gets to respond to this
- look at request parameters from the client
- access database
- produce resulting html page
- send page back to client.
The standard pattern is to retrieve data from the database in java code, and then load that data into a bean.
You then make that bean available as an attribute
It is then available for use in your JSP - either <jsp:useBean> tag or using ${ELexpressions}
All you can pass from the client to the server is request parameters - which are always strings.
Draw a picture of where the information is, and the information flows. Very rarely does it go directly from one "form" to another.
Cheers,
evnafets

How to put data from database into array

I need to answer hot to put data from database directly into array.
I tried like the code below but the error message said: java.lang.ArrayIndexOutOfBoundsException: 0, and it points to this line: numbers [row][0]= rs.getString("ID");
Hope you can help.
ResultSet rs = stmt.executeQuery(query);
     int row=0;
     String [] [] numbers=new String [row][10];
     // output resultset
     while ( rs.next() )
          numbers [row][0]= rs.getString("ID");
          numbers [row][1]= rs.getString("name");
     row++;
     // close resultset
     rs.close();
thanks,Devi

The exception is been thrown simply because you assigned '0' to the 'row' variable, indicating a zero length of the array. In fact you should assign the row count to it.
After all, don't do that. Make use of the Collection framework and map the ResultSet to a Collection of DTO's.
List<User> users = new ArrayList<User>();
while (resultSet.next()) {
    User user = new User();
    user.setID(resultSet.getString("ID"));
    user.setName(resultSet.getString("name"));
    users.add(user);
}

Without NI DAQ device- how to get data from MSP into labVIEW and process it

Hi,
I do not have an NI DAQ device. I have an MSP430 and my sensor is an ADXL335 Accelerometer. How do I get data from my MSP into labVIEW and process it?
Just looking for a nudge in the right direction. I'm having a hard time finding resources on labVIEW that don't involve NI specific DAQs.
Thanks in advance,
Aziz

There are many ways to get data into LabVIEW that do not involve NI-DAQ devices.
I think your easiest option would be to stream it via serial port if the data rate isn't too fast.
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

How to insert data from file into matlab script node

I have interfaced input data from file to be processed using matlab script node. But the problem is that I could not capture the multiple data into matlab script node and to convert it into matrix. Further to this I need to process the data by plotting graphs from it. Thank you in advance for the advice

Zarina,
To clarify your problem, you have a script node contaning your Matlab code. Are you then using the standard LV functions to load in your data from a file and pass it into the script node?
Regards
Tristan

How to insert data from file into long raw field using utl_file?

I try to insert binary data from a file (under AIX 4.3.3) into a LONG
RAW field (Oracle 8.1.6).
First, I retrieve the data from the file like this:
DECLARE
FileHandle = UTL_FILE.FILE_TYPE;
myVariable LONG RAW;
FileHandle := UTL_FILE.FOPEN ;('prj/oracle/admin/MARTIJN/udump',
'MyFile.ATT', 'R');
UTL_FILE.GET_LINE (FileHandle, myVariable);
UTL_FILE.FCLOSE(FileHandle);
INSERT INTO myTable(DUMMYFIELD) VALUES(myVariable);
Where DUMMYFIELD of table myTable is of type LONG RAW.
The GET_LINE statement crashes on Oracle Error ORA-6502: Numeric of
Value error: hex to raw conversion error.
What do I do wrong?
Do I use the right method to retrieve information from a file and put
it into a long raw field, should I try it another way?
Any help greatly appreciated,
Martijn Rutte

Zarina,
To clarify your problem, you have a script node contaning your Matlab code. Are you then using the standard LV functions to load in your data from a file and pass it into the script node?
Regards
Tristan

How to get data from MySQL into Analysis Services Tabular Model

Hi,
I have a problem with Analysis Services Tabular Model and MySQL ... I have to use several MySQL databases as a source of Tabuar Model ..
Is there any way to get connection working from Tabular Model to retrieve data from MySQL database. I have a situation that in MySQL server there is several databases with same schema, one for each customer. I have planned to join these customer databases
to one Tabular Model, create roles and users for each customer to query their data.
What do I have to do to get this working ?
Pasi

Hi ,
In Tabular model out of the box there is no direct connectors available for MySQL. Please see the list of supported Data Sources
http://msdn.microsoft.com/en-us/library/gg492165.aspx
But i think if you can establish a ODBC connectivity with data source to MYSQL , you can use the ODBC connection to retrieve the data from MySQL. Please try this and post the results here if it is possible or not.
Best Regards Sorna

How to write data from query into Real time cube?

Similar Messages

Maybe you are looking for