Error while doing schema level import using datapump

Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMP

877410 wrote:
Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMPpost complete command line for the expdp that made the abcdprod.DMP file

Similar Messages

[Q] ORA-30510 error while doing full database import

We have ORACLE 9.2.0.6 on Redhat LINUX AS 3.4. while we doing "full database import" there has ORA-30510 come out. I searched Metalink and Google, but not found much information. The error messages on import are:
. importing OUTLN's objects into OUTLN
. importing SYSTEM's objects into SYSTEM
. importing TKOWNER's objects into TKOWNER
IMP-00017: following statement failed with ORACLE error 30510:
"CREATE TRIGGER "TKOWNER".TRIG_DONOTANALYZE before analyze on schema decla"
"re begin if sys.dictionary_obj_name = 'MYWTKEMPLOYEE' then raise_ap"
"plication_error(-20101, 'Do Not ANALYZE MYWTKEMPLOYEE'); end if; end; "
IMP-00003: ORACLE error 30510 encountered
ORA-30510: system triggers cannot be defined on the schema of SYS user
. importing SYS's objects into SYS
. importing TKOWNER's objects into TKOWNER
About to enable constraints...
Import terminated successfully with warnings.

877410 wrote:
Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMPpost complete command line for the expdp that made the abcdprod.DMP file

Getting Error while doing month end provisions using FS00

Hi Guru,
please suggest.
while making month end provisions for salraies by using t code FS00 geeting error that Account XXXXX does not exist in company code level
please help me on reslove this.
Rgds..Suresh

Hello Suresh,
The GL Account does not exist for that Company code. Hence extend the GL Account to the Company Code by using Copy with template in FS00.
Regards
Kalpana

Error while doing GR against SA using MIGO

Hi Experts,
I am trying to do GR against scheduling agreement but getting error message as "Document $scheduling agreement$ dose not contains any selectable items"
I checked in SA, schedule lines are already there & also the open quantity is there.
Any idea is greatly appreciated.
Thanks in advance!!
Best Regards,
Sachin Patil

Check OSS notes - Note 886735 - MIGO: Unclear why GR is not possible for the purchase order.
From OSS notes..
Solution
The ZCHECKPO analysis report allows the user to enter a certain interval or an interval from purchase orders or scheduling agreements to be checked. In addition, you can also select a certain interval or an interval from purchase orders or scheduling agreements to be checked.
Carry out the following checks using the report:
1. Check the document category
Information: The document category 'F' is possible for purchase orders and the document category 'L' is possible for scheduling agreements.
2. Check that the purchase order/scheduling agreement is not deleted.
3. Check that the purchase order/scheduling agreement is not blocked.
4. Check whether the purchase order/scheduling agreement is released.
5. Check that the purchase order is not held.
6. Check whether the goods receipt is already posted.
7. Is there a purchase order for external service?
8. Is there a blanket purchase order?
9. Is there a text item?
10. Is there a statistical item?
11. Is the goods receipt indicator set in the purchase order/scheduling agreement?
12. Check whether the confirmation control is active and whether a confirmation is still not available.
13. Is there a valid scheduling agreement delivery schedule line?

Database full compile while doing schema import using impdp

hi,
oracle 10g
Database full compile while doing schema import using impdp..
what is happening here..
regards,
Deepak

My scenario
I need to import the particular schema from the full export dump. which has taken by using expdp. while importing i am using remap_schema for a single schema.
But it try to import the full dump and compile all the schema objects.
regards,
Deepak

Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.k

I tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
       gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
       lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
       git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
       gwa_item_data TYPE bapiobdlvitemcon,
       git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
       gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
       git_return    TYPE STANDARD TABLE OF bapiret2,
       gwa_return    TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900002'.
gwa_item_data-dlv_qty         = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900002'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900003'.
gwa_item_data-dlv_qty         = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900003'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '000020'.
gwa_item_data-dlv_qty         = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '000020'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
    header_data    = gwa_header_data
    header_control = gwa_header_ctrl
    delivery       = lv_delivery
TABLES
    item_data      = git_item_data
    item_control   = git_item_ctrl
    return         = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

JAXB Bindings - error while compiling Schema(s)

Hello, I want to create Java classes from a XML Schema by using JAXB Binding. However, when I do that a message error appears: "Error while compiling Schema" and then it says:
"C:\...\NetBeansProjects\myproject\build.xml:12: Problem: failed to create task or type import
Cause: The name is undefined.
Action: Check the spelling.
Action: Check that any custom tasks/types have been declared.
Action: Check that any <presetdef>/<macrodef> declarations have taken place."
Does anybody know what it's happening? It could be that there is a .jar missing?
Thank you very much

The document build.xml at line 12 says <import file="nbproject/build-impl.xml"/>. The file nbproject / build-impl.xml exists. If you want I could send it to you.You could post it here (the build-impl.xml, I mean).
I have a working example, we could compare.
I have included all the .jar you mentioned (excep the jaxb1-imp.jar).?
If you added this JAXB compiling target via NB's wizard, as you describe below, you shouldn't have to "include" whatever jars wich are already in the JDK. That is, if you're using JDK6 - JAXB was not (or not so much) included in the JDK prior to 1.6.
If the JDK is 1.5, I have no idea where you have to add these jars, possibly you're not add them in the correct classpath. Presumably Ant itself would need them in its classpath to be able to define the task.
And I have not touched anythingThey all say that... :o)
the only thing I did was to add other .jars (for other purposes).See?
Is it possible that you removed one of the important jars when doing back-and-forth tries?
But anyway I went back to remove this new .jars and the JAXB Binding still doesn't work .
Should I uninstall the IDE and re-install? I do not know what else to do ...Do you have any reason to believe you did corrupt the JDK or NetBeans's installation? For example, when you write about adding/removing the mentioned jars, did you do that somewhere in the JDK or NB installation?
Other than that, I don't see what reinstalling NB would do.
Without going to such extremes, have you tried simply to remove the JAXBBinding, and add it again in the NetBeans project, using the wizard?

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
Chetan

See the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan

Error while doing billing

Hi every one'
i got an error while doing billing
Error :sub transactions in schema Z step 0001 inconsistent,
this error is comming while using transaction eamabi,
the schema is worked properly since i updated a line item for additional TAX,
and we created new sub transactins for additional vat,AND for the sub transactions i have added a new GL account,
and i have added those Sub transactions in the respective field of the rate,
I have maintained properly all the fica setting for the sub trasactions...like ek01 and ek02 and table te305 & tfktvo as well. Dont understand where the setting have been missed..Please let me kow if you come acrosee this kind of situation.
later i have deleted all the line items in tha same schema,and i have given only quanti01 variant
and does not have any vat related line item maintained at schema even though the same error proposed.
regards
BekMs

I think you need to ask FICA person to fix the subs, This is not billing or rate error. There must be some config missing in sub's and main. If you give another try with any other subs it should work. This will help you to double check too.
GG

Error while doing GR against STO in IS Retail

Hi.
I am getting an Error while doing the GR against STO.
The error is "Enter goods receipts for vendor only. Message no. M7107". I am not able to understand the reason for the GR checking the vendor where it should consider the supplying site as vendor as the GR is being done against a delivery.
I have checked the Inforecord and the source list which is correctly maintained
(i doubt whether they are to be considered).
Kindly suggest...
Regards,
Vinod Kapote.

Hi Vinod Kapote,
Check following IMG Settings in your system;
(a) Schema for Stock transports
(b) Shipping data for Site
Hope you have carried out following activities;
(1) Purchase order with document type UB
(2) Outbound delivery using VL10B
(3) Post Goods Issue using VL02N
(4) Goods Receipt using MIGO
Bye,
Muralidhara

Error While Doing GR "Check table YMSEG:"

I am getting following error while doing GR for sales set article 303387.
Check table YMSEG: entry 303384 0001 does not exist
Sales set header 303387
sales set Component 303384 & 303386.
can't find any issue with the article (material) setup

YMSEG is a standard internal table used in import and export of function modules.
if you search SAP notes on YMSEG then you get about 230 hits.
Unfortunately the info given is by far not enough to tell you the reason for this error.
The number from the error explains just that it is one of the sales set Components
But you need to describe the process and what changes you eventually did compared to standard process. Only then we might be able to help you further.

Error while doing the repository export

hi,
I am getting error while doing the export repository,Message: GEN-13, Additional Message: Dictionary is not available on this database, can anyone help me how to resolve this issue.
thanks,
Sundar M

Hi Sundar,
Please provide the export repository command, what you used and the log file to review.
The error "Dictionary is not available on this database" will pop up when Siebel Repository is not present in DB.
For export process you have to give repository name as "Siebel Repository" and it will export schema in to *.dat file.
NOTE: Do not change Siebel Repository name for export process.
Thanks,
Shilpi

Error while converting schema from oracle to SQL server

Hello,
I am getting following error while converting schema from oracle to SQL server using SSMA.
I get Errors 1-3 while migrating procedures and error 4 while migrating a table.
1- O2SS0050: Conversion of identifier 'SYSDATE' is not supported.
2- O2SS0050: Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.
3- O2SS0050: Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported.
4- O2SS0486: <Primary key name> constraint is disabled in Oracle and cannot be converted because SQL Server does not support disabling of primary or unique constraint.
Please suggest.
Thanks.

The exact statement in oracle side which causing this error (O2SS0050:
Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.) is below:
dStartDate:= to_date(sStartDate,'MON-YYYY');
Statement causing error O2SS0050:
Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported is below.
nCount2:= length(regexp_replace(sDataRow,'[^,]'));
So there is no statement which is using to_date(VARCHAR2,
CHAR) and regexp_replace(VARCHAR2, CHAR) in as such. 'MON-YYYY' and '[^,]'
are CHAR values hence SSMA is unable to convert it from varchar2 to char.
Regarding SYSDATE issue, you mean to put below code in target(SQL) side in SSMA ?
dDate date := sysdate;
Thanks.

Error while doing ABGL Asset Credit Memo

Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
Sunil

Hi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu

Error while doing schema level import using datapump

Similar Messages

Maybe you are looking for