Error while download the data to an Excel sheet for ECC report from EP

Hi experts,
I had created a report program which will download the data to an Excel sheet using SAP OLE object
For this report i had created a tcode too. The report which i developed is perfectly working fine in SAPGUI. But if i download the data to an Excel sheet for the same report throught SAP EP.I am getting the error that "Error in excel downlaod"
I analyed by putting dubigg point and it throws exception while calling Function module.
The excpetion is " OLE object id not found".
Can any body gives a light on this why i'm not able download the excel in ep?
Thanks,
JB

Hello,
(by the way I came here to ask my question and is my first time visit but...)
The problem is obvious: How do you expect OLE handler can "touch" the local PC Excel through a web browser? I believe that is not possible. That means (at least for me) that I have to create the whole documents before I return them to the user. That is why I use XML Office documents generation or you can try to hack some Export to excel features of ERP reports.
Regards Otto

Similar Messages

Unable to download the data perfectly into excel sheet

Hi Frnds,
when i am trying to download the data from the output of a report into excel, some of the records(line items/rows) are getting stored in one of column of the excel sheet. Fog eg: my report outputs 500 line items. In excel after 100 rows the next 5-10 records/rows are storing in one column. so at the end of excel sheet i may not find total 500 records/line items.
Plz suggest me how to handle this.
Thnks,
Pavan

*& Report ZETA_EXCEL_DOWNLOAD_CLIPBOARD                               *
report zeta_excel_download_clipboard           .
include ole2incl.
data: w_cell1     type ole2_object,
       w_cell2     type ole2_object.
*--- Ole data Declarations
data: h_excel     type ole2_object,        " Excel object
      h_mapl      type ole2_object,        " list of workbooks
      h_map       type ole2_object,        " workbook
      h_zl        type ole2_object,        " cell
      h_f         type ole2_object,        " font
      gs_interior type ole2_object,        " Pattern
      worksheet   type ole2_object,
      h_cell      type ole2_object,
      h_cell1     type ole2_object,
      range       type ole2_object,
      h_sheet2    type ole2_object,
      h_sheet3    type ole2_object,
      gs_font     type ole2_object,
      flg_stop(1) type c.
          Internal table Declaration
data: begin of t_excel occurs 0,
vkorg(20) type c, "Sales Org
vbtyp(20) type c, "Document Category
auart(20) type c, "Document Type
ernam(20) type c, "Created By
vbeln(20) type c, "Document Number
posnr(20) type c, "Item Number
erdat(20) type c, "Created Date
vdatu(20) type c, "Header Requested Delivery Date
reqdat(20) type c, "Request date
condat(20) type c, "Confirm date
lifsk(20) type c, "Header Block
txt30(30) type c, "Order User Status Description
lifsp(20) type c, "Line Block
dispo(20) type c, "MRP Controller
dsnam(20) type c, "MRP Controller Description
vmsta(20) type c, "Material Sales Status
kunnr(20) type c, "Sold To
cname(35) type c, "Sold To Name
regio(20) type c, "State
cufd(10) type c, "CUD
bstnk(20) type c, "PO#
bsark(20) type c, "Ordering Method
matnr(20) type c, "Material
maktx(35) type c, "Material Description
t200(20) type c, "T200
vtext(20) type c, "T200 Description
matkl(20) type c, "Material Group
zzbomind(7) type c, "BOM Indicator
ostat(20) type c, "Order Status
cmgst(20) type c, "CRD
inco1(20) type c, "Incoterms
oqty(20) type c, "Order Quantity
pqty(20) type c, "Open Quantity
unit(20) type c, "UOM
onet(20) type c, "Order Value
pnet(20) type c, "Open Value
curr(20) type c, "Currency key
so_bezei like tvkbt-bezei,"Sales Office
sg_bezei like tvgrt-bezei,"Sales Group
bname(20) type c, "Ordering Party
contact(20) type c, "Contact Name
telf1(20) type c, "Contact telf1
reqqty(20) type c, "Item Request qty
reqval(20) type c, "Item Request value
conqty(20) type c, "Item Confirm qty
conval(20) type c, "Item Confirm value
zzrev(02) type c, "Revenue recognition acceptance
bezei(20) type c, "Revenue recognition text
vgbel(20) type c, "Reference Order for RETURNS
0008text(255) type c, "Internal Order Comment Text
end of t_excel.
data: t_excel_bckord like t_excel occurs 0 with header line,
      t_excel_bcklog like t_excel occurs 0 with header line,
      t_excel_blkord like t_excel occurs 0 with header line.
types: data1(1500) type c,
         ty          type table of data1.
data: it          type ty with header line,
it_2          type ty with header line,
it_3          type ty with header line,
         rec         type sy-tfill,
         deli(1)     type c,
         l_amt(18)   type c.
data: begin of hex,
         tab type x,
        end of hex.
field-symbols: <fs>      .
constants cns_09(2) type n value 09.
assign deli to <fs> type 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
data gv_sheet_name(20) type c .
M A C R O Declaration
define ole_check_error.
if &1 ne 0.
    message e001(zz) with &1.
    exit.
endif.
end-of-definition.
t_excel_bckord-vkorg = 'ABC'.
t_excel_bckord-vbtyp = 'DEF'.
t_excel_bckord-auart = 'GHI'.
t_excel_bckord-ernam = 'JKL'.
t_excel_bckord-vbeln = 'MNO'.
t_excel_bckord-0008text = 'XYZ'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC1'.
t_excel_bckord-vbtyp = 'DEF1'.
t_excel_bckord-auart = 'GHI1'.
t_excel_bckord-ernam = 'JKL1'.
t_excel_bckord-vbeln = 'MNO1'.
t_excel_bckord-0008text = 'XYZ1'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC2'.
t_excel_bckord-vbtyp = 'DEF2'.
t_excel_bckord-auart = 'GHI2'.
t_excel_bckord-ernam = 'JKL2'.
t_excel_bckord-vbeln = 'MNO2'.
t_excel_bckord-0008text = 'XYZ2'.
append t_excel_bckord.
t_excel_bcklog-vkorg = 'ABC'.
t_excel_bcklog-vbtyp = 'DEF'.
t_excel_bcklog-auart = 'GHI'.
t_excel_bcklog-ernam = 'JKL'.
t_excel_bcklog-vbeln = 'MNO'.
t_excel_bcklog-0008text = 'XYZ'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC1'.
t_excel_bcklog-vbtyp = 'DEF1'.
t_excel_bcklog-auart = 'GHI1'.
t_excel_bcklog-ernam = 'JKL1'.
t_excel_bcklog-vbeln = 'MNO1'.
t_excel_bcklog-0008text = 'XYZ1'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC2'.
t_excel_bcklog-vbtyp = 'DEF2'.
t_excel_bcklog-auart = 'GHI2'.
t_excel_bcklog-ernam = 'JKL2'.
t_excel_bcklog-vbeln = 'MNO2'.
t_excel_bcklog-0008text = 'XYZ2'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC3'.
t_excel_bcklog-vbtyp = 'DEF3'..
t_excel_bcklog-auart = 'GHI3'.
t_excel_bcklog-ernam = 'JKL3'.
t_excel_bcklog-vbeln = 'MNO3'.
t_excel_bcklog-0008text = 'XYZ3'.
append t_excel_bcklog.
t_excel_blkord-vkorg = 'ABC'.
t_excel_blkord-vbtyp = 'DEF'.
t_excel_blkord-auart = 'GHI'.
t_excel_blkord-ernam = 'JKL'.
t_excel_blkord-vbeln = 'MNO'.
t_excel_blkord-0008text = 'XYZ'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC1'.
t_excel_blkord-vbtyp = 'DEF1'.
t_excel_blkord-auart = 'GHI1'.
t_excel_blkord-ernam = 'JKL1'.
t_excel_blkord-vbeln = 'MNO1'.
t_excel_blkord-0008text = 'XYZ1'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC2'.
t_excel_blkord-vbtyp = 'DEF2'.
t_excel_blkord-auart = 'GHI2'.
t_excel_blkord-ernam = 'JKL2'.
t_excel_blkord-vbeln = 'MNO2'.
t_excel_blkord-0008text = 'XYZ2'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC3'.
t_excel_blkord-vbtyp = 'DEF3'..
t_excel_blkord-auart = 'GHI3'.
t_excel_blkord-ernam = 'JKL3'.
t_excel_blkord-vbeln = 'MNO3'.
t_excel_blkord-0008text = 'XYZ3'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC4'.
t_excel_blkord-vbtyp = 'DEF4'..
t_excel_blkord-auart = 'GHI4'.
t_excel_blkord-ernam = 'JKL4'.
t_excel_blkord-vbeln = 'MNO4'.
t_excel_blkord-0008text = 'XYZ4'.
append t_excel_blkord.
loop at t_excel_bckord.
concatenate
t_excel_bckord-vkorg
t_excel_bckord-vbtyp
t_excel_bckord-auart
t_excel_bckord-ernam
t_excel_bckord-vbeln
t_excel_bckord-posnr
t_excel_bckord-erdat
t_excel_bckord-vdatu
t_excel_bckord-reqdat
t_excel_bckord-condat
t_excel_bckord-lifsk
t_excel_bckord-txt30
t_excel_bckord-lifsp
t_excel_bckord-dispo
t_excel_bckord-dsnam
t_excel_bckord-vmsta
t_excel_bckord-kunnr
t_excel_bckord-cname
t_excel_bckord-regio
t_excel_bckord-cufd
t_excel_bckord-bstnk
t_excel_bckord-bsark
t_excel_bckord-matnr
t_excel_bckord-maktx
t_excel_bckord-t200
t_excel_bckord-vtext
t_excel_bckord-matkl
t_excel_bckord-zzbomind
t_excel_bckord-ostat
t_excel_bckord-cmgst
t_excel_bckord-inco1
t_excel_bckord-oqty
t_excel_bckord-pqty
t_excel_bckord-unit
t_excel_bckord-onet
t_excel_bckord-pnet
t_excel_bckord-curr
t_excel_bckord-so_bezei
t_excel_bckord-sg_bezei
t_excel_bckord-bname
t_excel_bckord-contact
t_excel_bckord-telf1
t_excel_bckord-reqqty
t_excel_bckord-reqval
t_excel_bckord-conqty
t_excel_bckord-conval
t_excel_bckord-zzrev
t_excel_bckord-bezei
t_excel_bckord-vgbel
t_excel_bckord-0008text
into it
separated by deli.
append it.
    clear it.
endloop.
loop at t_excel_bcklog.
concatenate
t_excel_bcklog-vkorg
t_excel_bcklog-vbtyp
t_excel_bcklog-auart
t_excel_bcklog-ernam
t_excel_bcklog-vbeln
t_excel_bcklog-posnr
t_excel_bcklog-erdat
t_excel_bcklog-vdatu
t_excel_bcklog-reqdat
t_excel_bcklog-condat
t_excel_bcklog-lifsk
t_excel_bcklog-txt30
t_excel_bcklog-lifsp
t_excel_bcklog-dispo
t_excel_bcklog-dsnam
t_excel_bcklog-vmsta
t_excel_bcklog-kunnr
t_excel_bcklog-cname
t_excel_bcklog-regio
t_excel_bcklog-cufd
t_excel_bcklog-bstnk
t_excel_bcklog-bsark
t_excel_bcklog-matnr
t_excel_bcklog-maktx
t_excel_bcklog-t200
t_excel_bcklog-vtext
t_excel_bcklog-matkl
t_excel_bcklog-zzbomind
t_excel_bcklog-ostat
t_excel_bcklog-cmgst
t_excel_bcklog-inco1
t_excel_bcklog-oqty
t_excel_bcklog-pqty
t_excel_bcklog-unit
t_excel_bcklog-onet
t_excel_bcklog-pnet
t_excel_bcklog-curr
t_excel_bcklog-so_bezei
t_excel_bcklog-sg_bezei
t_excel_bcklog-bname
t_excel_bcklog-contact
t_excel_bcklog-telf1
t_excel_bcklog-reqqty
t_excel_bcklog-reqval
t_excel_bcklog-conqty
t_excel_bcklog-conval
t_excel_bcklog-zzrev
t_excel_bcklog-bezei
t_excel_bcklog-vgbel
t_excel_bcklog-0008text
into it_2
separated by deli.
append it_2.
    clear it_2.
endloop.
loop at t_excel_blkord.
concatenate
t_excel_blkord-vkorg
t_excel_blkord-vbtyp
t_excel_blkord-auart
t_excel_blkord-ernam
t_excel_blkord-vbeln
t_excel_blkord-posnr
t_excel_blkord-erdat
t_excel_blkord-vdatu
t_excel_blkord-reqdat
t_excel_blkord-condat
t_excel_blkord-lifsk
t_excel_blkord-txt30
t_excel_blkord-lifsp
t_excel_blkord-dispo
t_excel_blkord-dsnam
t_excel_blkord-vmsta
t_excel_blkord-kunnr
t_excel_blkord-cname
t_excel_blkord-regio
t_excel_blkord-cufd
t_excel_blkord-bstnk
t_excel_blkord-bsark
t_excel_blkord-matnr
t_excel_blkord-maktx
t_excel_blkord-t200
t_excel_blkord-vtext
t_excel_blkord-matkl
t_excel_blkord-zzbomind
t_excel_blkord-ostat
t_excel_blkord-cmgst
t_excel_blkord-inco1
t_excel_blkord-oqty
t_excel_blkord-pqty
t_excel_blkord-unit
t_excel_blkord-onet
t_excel_blkord-pnet
t_excel_blkord-curr
t_excel_blkord-so_bezei
t_excel_blkord-sg_bezei
t_excel_blkord-bname
t_excel_blkord-contact
t_excel_blkord-telf1
t_excel_blkord-reqqty
t_excel_blkord-reqval
t_excel_blkord-conqty
t_excel_blkord-conval
t_excel_blkord-zzrev
t_excel_blkord-bezei
t_excel_blkord-vgbel
t_excel_blkord-0008text
into it_3
separated by deli.
append it_3.
    clear it_3.
endloop.
if h_excel-header = space or h_excel-handle = -1.
start Excel
    create object h_excel 'EXCEL.APPLICATION'.
endif.
PERFORM err_hdl.
*--- get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
PERFORM err_hdl.
set property of h_excel 'Visible' = 1.
add a new workbook
call method of h_mapl 'Add' = h_map.
PERFORM err_hdl.
*GV_SHEET_NAME = '1st SHEET'.
gv_sheet_name = 'Back Orders'.
get property of h_excel 'ACTIVESHEET' = worksheet.
set property of worksheet 'Name' = gv_sheet_name .
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
        data l_rc type i.
call method cl_gui_frontend_services=>clipboard_export
    importing
      data                 = it[]
    changing
      rc                   = l_rc
    exceptions
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      others               = 4.
call method of h_excel 'Cells' = w_cell1
    exporting
      #1 = 1
      #2 = 1.
call method of h_excel 'Cells' = w_cell2
    exporting
      #1 = 1
      #2 = 1.
PERFORM err_hdl.
   call method of h_excel 'Range' = range
    exporting
      #1 = w_cell1
      #2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
PERFORM err_hdl.
CALL METHOD OF h_excel 'QUIT'.
*GV_SHEET_NAME = '2ND SHEET'.
gv_sheet_name = 'Backlog'.
get property of h_excel 'Sheets' = h_sheet2 .
call method of h_sheet2 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
    importing
      data                 = it_2[]
    changing
      rc                   = l_rc
    exceptions
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      others               = 4.
call method of h_excel 'Cells' = w_cell1
    exporting
      #1 = 1
      #2 = 1.
call method of h_excel 'Cells' = w_cell2
    exporting
      #1 = 1
      #2 = 1.
PERFORM err_hdl.
   call method of h_excel 'Range' = range
    exporting
      #1 = w_cell1
      #2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
*GV_SHEET_NAME = '3rd SHEET'.
gv_sheet_name = 'Blocked Orders'.
get property of h_excel 'Sheets' = h_sheet3 .
call method of h_sheet3 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
    importing
      data                 = it_3[]
    changing
      rc                   = l_rc
    exceptions
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      others               = 4.
call method of h_excel 'Cells' = w_cell1
    exporting
      #1 = 1
      #2 = 1.
call method of h_excel 'Cells' = w_cell2
    exporting
      #1 = 1
      #2 = 1.
PERFORM err_hdl.
   call method of h_excel 'Range' = range
    exporting
      #1 = w_cell1
      #2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
*--- disconnect from Excel
free object h_zl.
free object h_mapl.
free object h_map.
free object h_excel.

Facing a Problem while downloading the data from ALV Grid to Excel Sheet

Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
   I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.

hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
     data : begin of itab occur 0,
                    matnr like mara-matnr,
               end of itab.
create new like this,
           data : begin of itab occur 0,
                    matnr(12) type N,
               end of itab.

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments Trying to download My Photos and movie 3 items so i can delete them all

I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them? Onece they get into my downloads i can do something with them as i understand. That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac? How much better is iLife11 then iPhoto08 and iMovie08 . Thanks Greg

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

Error while downloading the DNL_CUST_PROD1

Dear Experts
I am establishing middleware connection between CRM 6.0 and ECC 6.0
I am getting errors while downloading the DNL_CUST_PROD1.
I am getting   sysfail in crm inbound queue(smq2) with error saying
"   Immport of material type into hierarchy YBPCRMPROD not possible "
Could you help me in resolving this error.
Thanks & Regards
V.Srinivas

Hi Arup
Initially CRM system is a standalone in that we configured the best practises to make it as a BUSINESS ALL IN ONE while doing this we have defined hierarchy YBPCRMPROD in CRM and created products, now we are trying to establish the middleware connectivity between CRM and the ECC while doing this i am getting above error.
When i check the Hierarchy in CRM with the tcode COMM_HIERARCHY i am able to see the following
1)R3MATCLASS        MATERIAL GROUP
2)R3PRODHIER          PRODUCT HIERARCHY
3)YBPCRMPROD        BEST PRACTISES PRODUCT HIERARCHY
When i am trying to see assigned heirarchies to the apllication i am able to see the following using the tcode COMM_PRAPPLCAT
application                       HIERARCHY
sales                               R3PRODHIER
purchasing                     R3MATCLASS
product                           YBPCRMPROD
internet customer           YBPCRMPROD
When i press f4 on the hierarchiesid i am able to see the following.
1)R3MATCLASS        MATERIAL GROUP
2)R3PRODHIER          PRODUCT HIERARCHY
3)YBPCRMPROD       BEST PRACTISES PRODUCT HIERARCHY
I know that we can delete the hierarchy in the CRM by running a program which deletes hierarchies in the crm , but we canu2019t delete the hierarchy which is created in the CRM system without deleting the hierarchy how can i resolve this issue.
please help me in resolving this issue.
Thanks & Regards
V.Srinivas

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while writing the data into the file . can u please help in this.

The following error i am getting while writing the data into the file.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
.bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
[ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
'Write' failed due to: Error in opening
file for writing. Cannot open file:
C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
nested exception is: ORABPEL-11058 Error in opening file for writing.
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation
\WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
Specified output Dir has write permission 2.
Output filename has not exceeded the max chararters allowed by the
OS and 3. Local File System has enough space
.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</bindingFault>

Hi there,
Have you verified the suggestions in the error message?
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
Please ensure
1. Specified output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Local File System has enough space
I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ?

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while download the data to an Excel sheet for ECC report from EP

Similar Messages

Maybe you are looking for