Error while Drilling down across sheets

Hi ,
I am using the new BI 7.0 Bex Analyzer as forntend to my BI 7.0.
While navigating in BI Bex Analyzer, when I select the the drill down accross sheet from the context menu of any characteristics, i get an error message  as follows.
"*A Critical program error occurred. The program has to be clos. Please refer the trace for furhter inforamtion*."
My SAP GUI version is 7.10 and the patch level 5.0
Can any body suggest some solution on this.
Thanks in advance.
Nilesh Labde

I know it is too late to reply back on this error.
However, the query which you have already saved, You save it with a different technical name & then execute it, it works.
It worked for me.
Thanks,
Pradip.

Similar Messages

  • ORA-01722 Error while drill down

    Hi all,
    I have one EUL created with the join of two difference views. In order to join this two view, two id is needed to be joined. I have create a item class whereby it has been joins for this two views. Eg. I got view A with id1 & id2 link to view B with id1 & id2 as well. If I drill down from id1 or id2 column, the screen able to open up the new sheet which will show me the details information that I want.
    However, if try to drill down from item code then, the scren has prompted me the above error. What's wrong with this code ?
    Rgds
    Lim

    Hi,
    Check this note:
    794661
    or try searching OSS with that error.
    Hope this helps.
    Regards,
    Diego

  • Error while drilling down the data from reports

    Hi friends,
    I have created dimension hierarchies in rpd for drilling down the data.. While i drill down its showing no results at some level when i am clicking on the data.. but when i am clicking on the same levels column header its drilling down properly and i can view the next level for the data item which has shown no results while clicked on it.. Please help me and helps will be appreciated..

    Hi,
    >when i click on 2000 results displaying is no results
    but when i click on the header year its showing the results with 3 for 2000.
    So you are able to drill when you click on header..Go to column properties and make heading interaction to no interaction under column format,put value interaction to default and try to drill clicking on value.
    in RPD i have some derived columns like month .I created month as derived column from date using logical formula and i used this derived columns as the key.. Is it a problem?No I dont think its a problem
    Regards,
    Srikanth

  • Error while saving service entry sheet

    Hi Gurus
    I m getting the following error while saving service entry sheet
    Account determination for entry MGCA WRX not possible
    Req. for help
    Eldee

    Hi,
    Use T.code:OMWB,
    Enter Chart of Account,Now you will have new screen,
    Click WRX, sys will take to new screen
    Click Rules,select check box of debit and credit only and save.
    Now enter you G/L accounts(GR/IR) in debit and credit field and save.
    Now try your transaction.
    If helpful to you then reward.
    Regards,
    Biju K

  • Error while posting Down Payment

    Hi,
    I got error while posting down payment in F-48. the error was "Special G/L Indicator P is not defined for down payment".
    Thanks,

    Hello,
    "Special G/L Indicator P is not defined for down payment" because you have not maintained this indicator in your system. For maintain this you go to TC: OBYR, dbl down payment indicator P, , give your chart of accounts and press enter. Here you have to give normal Recon A/c and Alternative Recon A/c and save it. Now, go to TC: F-48 and you will able to post it now.
    Thanks
    Para

  • Error(U9KP7Q94) while drilling down the columns

    I uploaded the data to the OBI development server
    The data uploads ok and it is displayed in the dashboard, but when I try to drill down by clicking on the headings I am getting an error message ….
    Path not found (/users/administrator/STORM REPORT)
    + Error Details
    Error Codes: U9KP7Q94

    Hi,
    You could check whether the specified path still exists and whether the current user has access to this path.
    Cheers,
    Daan Bakboord
    http://obibb.wordpress.com

  • Changing the table name while drill down at the dashboard query

    I have a DAY fact table that has about 1B rows.
    The purpose of this table is to store on hand quantity for each item per day.
    On the presentation layer I have a dashboard that will display average on hand qty per year and then user can drill down to quarter/month/week and then by day level to see the actual value at evey level.
    Its hard to run aggregation on fly as all my 3 TEMP tablespace 32gb each filled and then I get error can not extent TEMP file.
    So I thought I will do the aggregation at the database level and store the aggregated data in another table. So at first dashborad will read this new aggregated table to display qty at yearly. As soon as user drill down to quarter the dashbord should query the actual DAY fact table by filtering for specific year and quarter.
    IS it possible? Can I change the table name while I drill down to lower level?
    Thanks in advance.

    Hi use,
    Yes. This is possible in OBIEE. You need to use Action Links to have navigation between reports. The main idea is to have 2 analysis. One with your aggregated data by year (using your aggregated table), and another one with the rest of the hierarchy and data (using normal fact table)
    You add an action link on this report, that can navigate to the second report. showing "the details" (in your case would be the rest of the time dimension).
    Please refer to http://www.rittmanmead.com/2010/07/obiee-11gr1-action-framework-and-conditions/ for actions links.
    Another way is to create 2 analysis, then go to the 2nd analysis, and filter the column year as "Is based on results of other analysis" and you select there the first analysis. In this case when you click on the year in the first analysis, this value will be passed to the second analysis so you can filter the rest of the hierarchy based on the year you clicked on the first analysis.
    If helpful, assign points.
    J.

  • While drill down a char system going into dump

    Hi,
    We have changed 0COUNTRY as a navigation attr to the 0COMPANY and added to the Muti provider.
    In query level initially for 0COMPANY data is paulating while trying to drill down 0COUNTRY with 0COMPANY then system is going into dump.
    Thes system message;
    The current application triggered a termination with a short dump.
    An error occurred while communicating with the BI server.
    As a result of this error, the system has been disconnected from the BI server.
    Detailed description
    can any one let me know the reason.
    Regards,
    Sharma.

    Hi,
    The problem is resolved in my self.
    Regards,
    Sharma

  • OBIEE error on Drill-down : Unable to navigate requested expression

    Hi Gurus,
    While trying out drill-down, am facing the folllowing error message - State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: XXX Time.YYY Month. Please fix the metadata consistency warnings. (HY000)
    I searched for the solution and found that we need to define an aggregated measure of a dimension table. But I dont know how to do it as I have very less hands-on in OBI Admin Tool. Kindly help me by explaining in detail to solve this issue.
    Thanks in advance.

    Hi,
    To define an aggregated measure of a dimension table, complete the following steps:
    *1.Create a new fact logical table with the physical dimension table as source.*
    *2.Include all fields that should be aggregated as a measure of this new fact object.*
    *3.Add an aggregation rule to the column*
    *4.set the logical level of the other dimensions to the grand total level.*
    Below, a sum aggregation rule :
    for more info:
    i.e:
    put the measure indicated by the error message in a fact table object.
    To define an aggregated measure of a dimension table, complete the following steps:
    a) Create a new fact logical table with the physical dimension table as source.
    b) Include all fields that should be aggregated as a measure of this new fact object.
    http://gerardnico.com/wiki/dat/obiee/dimension_measure
    Thanks
    Deva
    Edited by: Devarasu on Sep 29, 2011 7:02 PM

  • Error while creating process instruction sheet in COR2

    While creating Process instruction sheet, the following error is occuring. Please guide me to resolve the issue.
    Define variable QTYPRODUCED for default value
    Message no. CPOC110
    Diagnosis
    In the process instruction, variable QTYPRODUCED is defined for the value that you want the system to propose when data is entered in the PI sheet. This value does, however, not exist because it has not yet been defined as a variable.
    If you want to use a variable in a process instruction, however, you must first have defined it in a preceding process instruction or in the same process instruction.
    Procedure
    Define variable QTYPRODUCED in one of the preceding process instructions or in the same process instruction.
    Define Variable
    Regards
    Kumar

    1.  Assign characteristic PPPI_VARIABLE to the process instruction before the message characteristic to which the variable is to refer
    2.  Assign the required variable name to characteristic PPPI_VARIABLE.

  • Validity period error while creating Service Entry Sheet.

    Hi SAP experts,
    Users are facing below two error messages while creating serivce entry sheet with respect to Standard PO (NB).The PO has RFQ refrence where Validity start and end date is blank. Also PO has Item category 'D' (Services)
    1) "Runtime of entry must fall within Run time of the PO (05.12.2008-05.01.2009)
    2) Entry must be wihin validity period of purchase order (05.12.2008-05.01.2009)
    In the EKKO table system is showing validity start and end date for PO but it is not present in the PO (NB) by ME 22 / 23N.
    Basically standard PO (NB) should not have validity start date and end date but still it is showing in the table EKKO. 
    Kindly provide me related resolution ASAP.
    Thanks
    BR,
    Rahul

    Hi Alex,
    Thanks for the quick reply.
    There is no Validity period maintained in the PO header under "Additional data".
    but still I am getting Validity data in the table EKKO for standard PO (NB).
    BR,
    Rahul

  • Error in Drilled down ALV Report.

    Hi all
    i am creating a single level drilled down report , in that in the first screen i am displaying the header detials , in the second level i am displaying the item detial of the particular line..
    While processing the second level i am getting a dump like
    A PERFORM was used to call the routine "USER_COMMAND" of the program
    "SAPLSLVC_FULLSCREEN".
    This routine contains exactly 1 formal parameters, but the current
    call contains 2 actual parameters.
    parameters.
    here is my code :
    FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM.
    CASE R_UCOMM.
    WHEN '&IC1'.
    PERFORM BUILD_CATALOG_EKPO.
    PERFORM EVENT_EKPO.
    PERFORM POPULATE_EVENT_EKPO.
    PERFORM DATA_EKPO.
    PERFORM BUILD_LIST.
    PERFORM DISPLAY_EKPO.
    ENDCASE.
    ENDFORM.
    *&      Form  BUILD_CATALOG_EKPO
          text
    -->  p1        text
    <--  p2        text
    FORM BUILD_CATALOG_EKPO .
      WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'EBELN'.
      WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'EBELP'.
      WA_FIELDCAT-SELTEXT_M = 'Item No.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
        WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'MATNR'.
      WA_FIELDCAT-SELTEXT_M = 'Material NO.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
        WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'WERKS'.
      WA_FIELDCAT-SELTEXT_M = 'PLANT.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
        WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'LGORT'.
      WA_FIELDCAT-SELTEXT_M = 'Storage Loc.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
        WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'MENGE'.
      WA_FIELDCAT-SELTEXT_M = 'Quantity.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
        WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'MEINS'.
      WA_FIELDCAT-SELTEXT_M = 'UNIT.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    ENDFORM.                    " BUILD_CATALOG_EKPO
    *&      Form  EVENT_EKPO
          text
    -->  p1        text
    <--  p2        text
    FORM EVENT_EKPO .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE           = 0
    IMPORTING
       ET_EVENTS             = V_EVENTS
    EXCEPTIONS
      LIST_TYPE_WRONG       = 1
      OTHERS                = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " EVENT_EKPO
    *&      Form  POPULATE_EVENT_EKPO
          text
    -->  p1        text
    <--  p2        text
    FORM POPULATE_EVENT_EKPO .
    READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
    IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME = WA_EVENT-FORM.
    ENDIF.
    ENDFORM.                    " POPULATE_EVENT_EKPO
    FORM F_TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = IT_LISTHEADER
       i_logo                   =
       I_END_OF_LIST_GRID       =
    ENDFORM.
    *&      Form  DATA_EKPO
          text
    -->  p1        text
    <--  p2        text
    FORM DATA_EKPO .
    DATA:RS_SELFIELD TYPE SLIS_SELFIELD.
    READ TABLE ITAB_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
    SELECT EBELN EBELP MATNR WERKS LGORT MENGE MEINS
    FROM EKPO
    INTO CORRESPONDING FIELDS OF TABLE ITAB_EKPO
    WHERE EBELN = WA_EKKO-EBELN.
    DATA :ID_ITEM_COLOR.
    LOOP AT ITAB_EKPO INTO WA_EKPO.
    ID_ITEM_COLOR = ID_ITEM_COLOR + 1.
    IF ID_ITEM_COLOR = 8.
       ID_ITEM_COLOR = 1.
    ENDIF.
    CONCATENATE 'C' ID_ITEM_COLOR '10' INTO WA_EKPO-LINE_COLOR_ITEM.
    MODIFY ITAB_EKPO FROM WA_EKPO TRANSPORTING LINE_COLOR_ITEM.
    ENDLOOP.
    ENDFORM.                    " DATA_EKPO
    *&      Form  DISPLAY_EKPO
          text
    -->  p1        text
    <--  p2        text
    FORM DISPLAY_EKPO .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
       I_CALLBACK_PROGRAM                 = V_REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = 'USER_COMMAND '
      I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
       I_GRID_TITLE                      = I_TITLE_EKPO
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
       IT_FIELDCAT                       = I_FIELDCAT[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
       IT_EVENTS                         = V_EVENTS
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
      TABLES
        T_OUTTAB                          = ITAB_EKPO
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " DISPLAY_EKPO
    *&      Form  BUILD_LIST
          text
    -->  p1        text
    <--  p2        text
    FORM BUILD_LIST .
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    Set layout field for row attributes(i.e. color)
      gd_layout-info_fieldname =      ' LINE_COLOR_ITEM'.
    ENDFORM.                    " BUILD_LIST
    Arun Joseph

    The form USER_COMMAND should have 2 changing/actual parameters which is standard.
    Ex:
    FORM user_command USING r_ucomm LIKE sy-ucomm 
    rs_selfield TYPE slis_selfield.
    ENDFORM.

  • F-04 Section code error while full Down Payment Clearing

    Hi,
    I am facing a situation wherein suppose I have given an advance of INR 10,000 to an employee as Travel advance but due to some reason his trip got cancelled and the employee is refunding me the full advance. I am trying to clear that down payment of INR 10,000 through transaction code F-04 but I am getting an error and the system is asking to input Section code to proceed further but the Section code field is greyed out; I can see only Business Place coming automatically but not Section code. In this case ofcourse no invoice will be raised on the employee.
    I am facing the same problem if try to clear through F-54 without any invoice reference. But when I try to do a partial/residual clearing the system allows me to enter Section code and proceed with the clearing. I have created a validation for making Section code mandatory and am using Sets (t-code GS01) in my validaiton but i have not inputted clearing transaction codes in there.
    What I am unable to understand is why I am getting this error only while doing full clearing and without invoice reference. If there is something wrong with the validation I should get the same error while doing partial/residual clearing.
    Please help me out on this one.
    Thanks

    Hi
    In validation , you have to give TCODs in which both the field required to make mandatory. Otherwise it is applicable for every transaction of vendor.
    Make necessary changes in prequisits in validation.
    Thannks
    GG

  • Workspace error when drilling down on Essbase Cube

    An Interactive Reporting Service error has occurred.-Failed to acquire requested service.
    (2001)
    We're trying to create OLAP queries in IR to deploy through workspace. When I drill down on any dimension, after deploying to workspace, I get the generic error above. Has anyone seen this error?

    I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
    Any replies will indeed be helpful.

  • Error when drill down with essbase hierarchy

    Hi ,
    I am displaying one bar chart with, one Ragged hierarchy dimension "Region" ( structure : total region - > India , US -> India south , US south -> chennai , California) and "revenue" (measure) .
    Sometime's the drill down is happening smoothly (region - > sub region - > city) but sometimes its throwing below error :
    Error Codes: OAMP2OPY:QIKSHNQU
    DXE compiler error. Coordinate in target list must match to*coordinate in group by list. Source name:*
    GroupbyAndCoorTableCompiler::run. XML: <sawxd:expr*xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"**xmlns:sawxd="com.siebel.analytics.web/expressiondxe/v1.1"**xmlns:sawq="com.siebel.analytics.web/querydxe/v1.1"**xsi:type="sawq:groupbyField" refCoorID="5"/>*
    FYI , I have a product prompt attached with this graph . i.e , when user selects "total product" and drilling down its
    working perfectly but when selects "network products" its throwing the mentioned error .
    OBIEE version used : 11.1.1.6.2 (Build 120604.0813 BP1 64-bit)
    essbase version used : 11.1.2.1
    Thanks
    sayak

    I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
    Any replies will indeed be helpful.

Maybe you are looking for