Error while posting Down Payment

Hi,
I got error while posting down payment in F-48. the error was "Special G/L Indicator P is not defined for down payment".
Thanks,

Hello,
"Special G/L Indicator P is not defined for down payment" because you have not maintained this indicator in your system. For maintain this you go to TC: OBYR, dbl down payment indicator P, , give your chart of accounts and press enter. Here you have to give normal Recon A/c and Alternative Recon A/c and save it. Now, go to TC: F-48 and you will able to post it now.
Thanks
Para

Similar Messages

  • CO Object Assignment Error while posting Down Payment Request

    User is raising a Down Payment Request for the purchase of an Asset  through a Purchasing Document. This Asset Master has got the cost center and WBS Element assigned in it.
    System while saving the DP Request is throwing an error that “CO Account Assignments has different Profit Centers”
    I have also checked the cost center master but the profit center assigned there is correct only. Should I check the OKB9 settings ? If yes, for which GL Account do I need to check ? Where else can I check the CO Object Assignments for profit centers ?
    Requirement is critical. Please help.
    Thank you
    Ravi
    9849393564

    Hi,
    Good evening and greetings,
    Please have a look in GGB1 (Profit Centre Substitution), there may be some rule which is overriding the OKB9.
    Please reward points if found useful.
    Thanking you,
    With kindest regards,
    Ramesh Padmanabhan

  • Error while posting Incoming Payment.

    Hi
    I Got this error while posting Incoming Payment. What do this Error Mean. How to solve it.
    Error:
    SBO_Application_ItemEventAP Object reference not set to an instance of an object
    Thank You

    Hi Gayathri,
    Try to disconnect the add-ons if any and then add the incoming payment.
    Regards,
    Vijay kumar

  • Error when posting Down payment with reference to down payment request

    Hi Experts,
    In October of 2010 we upgraded from version SAP 4.7 to version 604 SAPKH60406.  
    With this upgrade we decided to select the following FM setting:
    "Flag to activate down payment request update to PO history"
    If this flag is set, down payment requests are updated to the purchase order history. In addition, when you create a down payment referencing this down payment request , the down payment request is cleared by the down payment.
    Use- Set this flag if you want to see the down payment requests  in the purchase order history.
    So, since October 2010, the Down payment requests have been updated to the PO history (note - no update of the down payment request was made to the PO status tab) and the down payments (made with reference to the down payment request) have been clearing the DP requests.
    Today we have applied packages SAPKH60407 - SAPKH60409 and we are in the process of testing. 
    Now we are experiencing errors when processing down payments:
    1. create the down payment request (F-47) - this is OK
    2. create the down payment (F-48) with reference to the down payment request - ERROR MESSAGE F5373 - "Order value will be exceeded"
    Can anyone please explain why this is happening?  We would like to keep the "Flag to activate DPR update to PO history" ON
    as it has been since October 2010.
    Thanks,
    Michelle

    Hi,
    Please find the below link it will help full for you,........
    Order Value will be exceeded Msg No. F5373
    Naresh

  • Error while posting Incoming payments from customers

    Hi Experts,
                      when i am trying to post Incoming payments from customers in F-28,The payment difference amount is Rs 5.
    while simulating the following error 
    "TAX CODE C2 FOR COUNTRY IN HAS BEEN DELETED OR INCORRECTLY CHANGED"
    MESSAGE NO.FS201

    Hi,
    OBZT just controls the display of the various tax codes in the drop down list if MIRO/ FB60 etc.
    You need to maintain the atx coe correctly in FBZP. Go to FBZP and in this tax code and check whether the tax rates etc. have been defined correctly for it.
    Regards,
    SDNer

  • F-04 Section code error while full Down Payment Clearing

    Hi,
    I am facing a situation wherein suppose I have given an advance of INR 10,000 to an employee as Travel advance but due to some reason his trip got cancelled and the employee is refunding me the full advance. I am trying to clear that down payment of INR 10,000 through transaction code F-04 but I am getting an error and the system is asking to input Section code to proceed further but the Section code field is greyed out; I can see only Business Place coming automatically but not Section code. In this case ofcourse no invoice will be raised on the employee.
    I am facing the same problem if try to clear through F-54 without any invoice reference. But when I try to do a partial/residual clearing the system allows me to enter Section code and proceed with the clearing. I have created a validation for making Section code mandatory and am using Sets (t-code GS01) in my validaiton but i have not inputted clearing transaction codes in there.
    What I am unable to understand is why I am getting this error only while doing full clearing and without invoice reference. If there is something wrong with the validation I should get the same error while doing partial/residual clearing.
    Please help me out on this one.
    Thanks

    Hi
    In validation , you have to give TCODs in which both the field required to make mandatory. Otherwise it is applicable for every transaction of vendor.
    Make necessary changes in prequisits in validation.
    Thannks
    GG

  • Lockbox error while posting customer payments

    Hello,
    I am testing the lockbox file upload and the system was able to locate the Customer number but while clearing customer, I am getting an error saying
    No payment advices were found
    Message no. F5664
    I am trying to edit payment advice and I am getting the error as below
    Payment advice 01 10000000 does not exist for account 110006 C850
    Message no. FA006
    Please let me know why this error is coming.
    Thank You.
    Edited by: Raghavaa on Dec 26, 2011 8:17 PM

    I have found the cause and solution to this problem.
    This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
    This was resolved by splitting the IDOC into 2.
    The solution is to First post only the KNA1 segment and create the customer.
    In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”:  you would have got the KUNNR after the first step.
    Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC. 
    I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
    Cheers
    Venkat

  • Error while posting Incoming payment Cancellation entry in Current date

    Hi Experts
    Scenario
    Incoming payenet created on 31-05-2009
    Cancellation to be done on current date - 02-06-2009
    Current period selected as 010609 to 300609 in general settings
    When Incoming payment is cancelled - The system shows message ' The selected period is locked, Posting will be created in Current period', Continue - ?
    When YES is clicked - 'Date deviates from permissible range - (Journal Entry - posting date) Msg - (173-11)
    Document Numbering Journal entry is for Current period. (All the Journal entries are getting posted in current date, hence Document numbering is correct for Journal entry)
    PLEASE NOTE - The cancellation entry is needed to be passed on system date (02-06-2009) and NOT original document date of incoming payment (31-05-2009)

    Hi Sundaraja
    In 2007 B this issue does not arise, working FINE
    In 2005 B, there is option to set period as Current which I have done. and Active 'YES' & Locked 'NO'. Infact I have done this for all the periods of yr 2009-10.
    Still getting the error.
    Regards,
    Sid

  • Error While Posting Outgoing Payment

    I am trying to post a test document using FBZ2 in a new company code. I am getting an error message " The entry XXXX (the new company code that I have configured) is missing in table T043G.
    Please let me know what does that mean and how I can resolve it.

    Hi,
    It menas you forgot the define Tolerances for Groups of Customers/Vendors
    T043G = Tolerances for Groups of Customers/Vendors
    Please follow the <b>T-code "OBA3"</b> and assign here Tolerance group with company code.
    If any doubt please let me know .
    if usefull assign points.
    Rgd
    Amit

  • Error: Not possible to post down payment clearing.There are no down payment

    Hi expert,
    I am running a settlement for an internal order and encounter the following error message.
    "Not possible to post down payment clearing. There are no down payments."
    Message no. AA571
    When checked on the vendor, the invoice has been cleared in the same month before the settlement. Under the Internal order line items, there is still an unsettled amount of the invoice.
    This internal order settles to an AUC asset. Previous month settlement was ok. Only problem with december.
    The downpayment acct is currently zero.
    Is there something wrong with the message table, or the posting of the vendor invoice ? Anything to do with the special GL indicator ?
    Kindly advise what is the cause and the method to resolved this asap.
    Thanks.
    Angel.

    Hi Angel ,
    My client also getting error message while doing settlement(T.C.KO88) even though Note.8600038 applied.
    Error Message:Not Possible to post down payment clearing .There are no down payments.
    Message: AA571
    If your issue is solved.
    please can you tell how did you solve this issue.
    Thanks,

  • Incoming payment by F-28: Reason code error while posting

    Hello everyone,
    I want to post Incoing Payment using F-28 net of TDS. I want the separate GL account to be picked up automatically for the difference when I enter the Reason Code 003.
    I did the following customization for the same.
    1. Financial Accounting> Accounts Receivable and Accounts Payable> Business Transactions>Incoimng Payments> Incoming Payments Global Settings>Overpayment/Underpayment> Define Reason Codes:- Here I selected the Indicator 'C' for reason code 003 which is for "Indicator: Charge off difference via separate account". The reason code 003 is for TDS Netted
    2. Below the Define Reason Code node, I selected the node 'Define Accounts for Payment Differences' . Selected the key ' Rules' and selected the checkbox 'Reason Code'. Then clicked on 'Accounts' and enetered the desired GL account against the reason code '003'.
    After doing the above customization I posted the Incoming payment using T code F-28. I entered the difference in the field 'Difference Posting'. Then entered reason code '003' which is for 'TDS netted' in the field 'Reason Code'. Now, I am getting the follwoing error.
    Reason codes with automatic charge-off are not permitted here
    Message no. F5605
    Diagnosis
    The reason code entered is designed to ensure that the payment difference amount is posted to an account specially set up for this purpose.  Postings of this nature usually require additional specifications (e.g. tax code, business area). If the difference stems from a single open item, the necessary specifications can be taken from that item. In the case that led to this error message, however, the difference does not stem soley from one item, which means that this method cannot be used.
    System Response
    The reason code entered is not accepted.
    Procedure
    You can either select a different reason code, which would create a new open item for the customer or vendor OR write off the difference using the function Charge off diff.. This function either takes you into a pre-configured account assignment model or into the document overview. From here you can enter the required difference postings.
    How can I proceed ahead?
    Thanks and Regards,
    Pradnya

    Hi Saulo,
    Thanks for ur reply.
    I had alreay done the config in OBXL and OBBE. Only thing I wanted to know is while posting Incoming Payment by F-28, how to use this reason code.
    Ur reply was a gr8 help for me.
    Regards,
    Pradnya

  • Deferred tax: Post down payment clearing individually $1 while f-4E3?

    Hi all,
    We are booking the invoice as well as clearing the special GL transaction  through F-43/ F-41
    001 39S      0009000457 PRADEEP SANGVIKAR          10,000.00-
    002 40       6030000039 Testing Charges             9,066.00                 SA
    003 40       4040000067 Service Tax Credit(           907.00                 SA
    004 40       4040000069 EDN cess on ST cred            18.00                 SA
    005 40       4040000071 H&SECess on ST cred             9.00                 SA
    Hhere S (SPECIAL GL) is for staff advance
    we are getting the error
    Deferred tax: Post down payment clearing individually $1
    Message no. DEFTAX023
    kindly solve ?

    Hi,
    Kindly refer to below SAP notes. Might be helpful.
    Note 913805 - Error FF891 or DEFTAX025 when posting FI-Documents Version: 5
    Thanks
    Aravind

  • Deferred tax: post down payment clearing individually $2 while f-44

    Dear Experts:
    We are trying to clearing the Special G/L transaction through T-code : F-44 but facing an error as Deferred tax: Post down payment clearing individually $2. Please find attached screen shot for your reference.
    Would you please suggest me why I'm facing this error and how can I resolve this issue?
    Thanks in advance and your prompt response is will be highly appreciated.
    Best Regards.
    Ripon Kumar Paul

    Dear Dev:
    Many thanks for your prompt reply. Already I've checked Sap Note 913805 and deleted all 4 BTEs mentioned there through T-code : FIBF but problem still exists. I'm facing the same problem.
    Best Regards.
    Ripon Kumar Paul

  • While doing down payment request with PO (F-47)

    Hi,
    While doing Downpayment Request (Capital Vendors) with reference PO the system is showing below error.
    Contact your system administrator (table error)
    Message no. AA866
    Diagnosis
    No account has been entered for posting down payments in area 01 under the account assignment key 411102 (chart of accounts WFPL).
    Procedure
    Enter the account using the Customizing menu.
    Can you please anyone help me on this?
    Regards,
    Schilukuri

    When I am assigning in AO90 below error is araising.
    Account 641303 not yet defined as reconciliation account in company code WFP1
    Message no. AC308
    Diagnosis
    The account assigned for these circumstances (G/L account:down payments) has to be a reconciliation account. This account is not yet defined as such in company code WFP1.
    Procedure
    Define the account as a reconciliation account.
    Please help me
    Regards,
    Schilukuri

  • Withholding Tax Error during Vendor Down Payment

    Hi,
    We have created some new Withholding Tax Types and codes and have assigned them to a Vendor. Now when we try to make a down payment on this Vendor, at the time of posting the system gives the error:
    "WCT Code not allowed in Down Payment. Remove the WCT Code."
    We are using the newly created Withholding Tax code, so how and why is the system taking it as WCT?
    Please help.
    Thanks!
    Regards,
    Angad Nagpal

    Hi
    First create withholding tax types for Payment Posting and withholding tax codes and while assigning withholding tax types and codes in Vendor Master Data , only assign withholding tax types and select Liable checkbox and do not assign withholding tax codes.
    while doing Down payments or Invoices system will prompt a pop-up box and you can select the relevant tax codes.
    Then you can check whether it is calculating the taxes or not.
    Regards
    Venkat

Maybe you are looking for