ORA-01722 Error while drill down

Hi all,
I have one EUL created with the join of two difference views. In order to join this two view, two id is needed to be joined. I have create a item class whereby it has been joins for this two views. Eg. I got view A with id1 & id2 link to view B with id1 & id2 as well. If I drill down from id1 or id2 column, the screen able to open up the new sheet which will show me the details information that I want.
However, if try to drill down from item code then, the scren has prompted me the above error. What's wrong with this code ?
Rgds
Lim

Hi,
Check this note:
794661
or try searching OSS with that error.
Hope this helps.
Regards,
Diego

Similar Messages

  • ORA-01722: Error while executing query in Query Designer

    Hi All;
    I am getting the below error while executing a query
    ORA-01722: invalid number
    Error reading the data of InfoProvider
    Error while reading data; navigation is possible
    Have anyone encountered this before? How do i resolve this?
    Thanks!
    ~ Arun KK

    Hi,
    Did you checked all the setting required to run this query are present in the Qualtiy system??
    Which means all the characteristics,key figures are in active state.
    Also all the cubes are in active state with no issues with the involved in the dimensions used for the query.
    Also do a check in the query and if you have authorization try to save the same query and execute the saved one again in quality and see if the same error happens again.
    Thanks
    Ajeet

  • Error while Drilling down across sheets

    Hi ,
    I am using the new BI 7.0 Bex Analyzer as forntend to my BI 7.0.
    While navigating in BI Bex Analyzer, when I select the the drill down accross sheet from the context menu of any characteristics, i get an error message  as follows.
    "*A Critical program error occurred. The program has to be clos. Please refer the trace for furhter inforamtion*."
    My SAP GUI version is 7.10 and the patch level 5.0
    Can any body suggest some solution on this.
    Thanks in advance.
    Nilesh Labde

    I know it is too late to reply back on this error.
    However, the query which you have already saved, You save it with a different technical name & then execute it, it works.
    It worked for me.
    Thanks,
    Pradip.

  • Error while drilling down the data from reports

    Hi friends,
    I have created dimension hierarchies in rpd for drilling down the data.. While i drill down its showing no results at some level when i am clicking on the data.. but when i am clicking on the same levels column header its drilling down properly and i can view the next level for the data item which has shown no results while clicked on it.. Please help me and helps will be appreciated..

    Hi,
    >when i click on 2000 results displaying is no results
    but when i click on the header year its showing the results with 3 for 2000.
    So you are able to drill when you click on header..Go to column properties and make heading interaction to no interaction under column format,put value interaction to default and try to drill clicking on value.
    in RPD i have some derived columns like month .I created month as derived column from date using logical formula and i used this derived columns as the key.. Is it a problem?No I dont think its a problem
    Regards,
    Srikanth

  • Creating database problem with ORA-01519: error while processing file '' ne

    Dear all,
    I am having rough time with creating database manually. can anyone help me with the following errors.
    ALERT LOGFILE:-
    Sun May 31 12:00:39 2009
    Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
    ORA-01501: CREATE DATABASE failed
    ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
    ORA-27040: file create error, unable to create file
    OSD-04002: unable to open file
    O/S-Error: (OS 3) The system cannot find the path specified.
    Error 1519 happened during db open, shutting down database
    USER: terminating instance due to error 1519
    Sun May 31 12:00:39 2009
    Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
    ORA-01519: error while processing file '' near line
    CREATE DATABASE SCRIPT:-
    create database ORACLE5
    user sys identified by bala
    user system identified by bala
    logfile
    group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
    group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
    group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
    maxlogfiles 5
    maxlogmembers 5
    maxloghistory 1
    maxdatafiles 50
    maxinstances 1
    datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
    undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
    sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
    default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
    character set US7ASCII
    NATIONAL CHARACTER SET AL16UTF16
    INIT.ORA FILE:-
    # Copyright (c) 1991, 2001, 2002 by Oracle Corporation
    # Archive
    log_archive_format=ARC%S_%R.%T
    # Cache and I/O
    db_block_size=8192
    db_cache_size=25165824
    db_file_multiblock_read_count=16
    # Cursors and Library Cache
    open_cursors=300
    # Database Identification
    db_domain=""
    db_name=oracle5
    # Diagnostics and Statistics
    background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
    core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
    user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
    # File Configuration
    #db_create_file_dest=D:\oracle\product\10.1.0\oradata
    db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
    db_recovery_file_dest_size=2147483648
    # Job Queues
    job_queue_processes=10
    # Miscellaneous
    compatible=10.1.0.2.0
    # Pools
    java_pool_size=50331648
    large_pool_size=8388608
    shared_pool_size=83886080
    # Processes and Sessions
    processes=150
    # Security and Auditing
    remote_login_passwordfile=EXCLUSIVE
    # Shared Server
    dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
    # Sort, Hash Joins, Bitmap Indexes
    pga_aggregate_target=25165824
    sort_area_size=65536
    # System Managed Undo and Rollback Segments
    undo_management=AUTO
    undo_tablespace=UNDOTBS1
    control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

    Hi,
    undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
    After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
    Bartek

  • ORA-01092 error while upgrading database from 9.2.0.6 to 10.2.0.1

    Hi ,
    Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
    I executed the catupgrd.sql successfully and recompiled invaild objects.
    After that i tried to startup the database,but am getting the error:
    sql>startup
    oracle instance started
    database mounted
    ORA-01092 : Oracle instance terminated. Disconnection forced
    I checked alert log file.
    I am getting the following errors
    Errors in file /u01/......./udump/VIS_ora/7179.trc
    ORA-00604: error occurred at recursive SQL level 1
    ORA-00607: internal error occurred while making change to a datablock
    ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
    Error 604 happened during database open . Shutting down database
    instance terminated by USER pid =7179
    ORA-01092 error Signaled during alter database open
    Is there any block corruption? could u please share the solution for these errors?

    Hi;
    You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
    Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
    Regard
    Helios

  • ORA-12571 error while creating packages from Windows clients

    Hello,
    We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
    However, there are
    1. no errors in connecting and creating transactions from a Sql session
    2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
    3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
    This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
    Can somebody help me resolve this issue. Any Help would be greatly appreciated.
    Regards.
    Lakshmanan, K

    Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
    I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
    Ben

  • Dbms_xmlschema.registerschema, (ORA-31084: error while creating table )..

    Hello,
    I have some problems with dbms_xmlschema.registerschema
    My database is: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    My XSD schema is (SEPA pain.002.001.03.xsd) also available on this url: http://code.google.com/p/leontestbed/source/browse/trunk/bc2/sample/Schema/pain.002.001.03.xsd?r=241
    After
    begin
       DOK_XML_UTIL.p_vnesi_xsd_blob(401941242); -- store a XSD on file system from blob field
       dbms_xmlschema.registerschema(
        schemaurl => 'http://localhost/TEST1.XSD',
        schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
        csid => nls_charset_id('AL32UTF8'));
    commit;
    end;I get:
    ORA-31084: error while creating table "INIS_PROD"."Document2781_TAB" for element "Document"
    ORA-02320: failure in creating storage table for nested table column "XMLDATA"."CstmrPmtStsRpt"."OrgnlPmtInfAndSts"
    ORA-01792: maximum number of columns in a table or view is 1000
    ORA-02310: exceeded maximum number of allowable columns in table
    ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 65
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 136
    ORA-06512: at line 4
    What I'am doing wrong or what is the reason for this error..

    Arrgghhh.....
    begin
       DOK_XML_UTIL.p_vnesi_xsd_blob(401941242);
       dbms_xmlschema.registerschema(
        schemaurl => 'http://localhost/TEST1.XSD',
        schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
        csid => nls_charset_id('AL32UTF8')
        , local => true
      , genTypes => false
      , genTables => false);
    commit;
    end;sorry...

  • ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401

    I receive the following error by creating dataabse as below sql:
    ORA-01501: CREATE DATABASE failed
    ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
    ORA-27039: create file failed, file size limit reached
    Additional information: 1
    CREATE DATABASE SISDEV04
         LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
              GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
         NOARCHIVELOG
         CHARACTER SET ZHT16BIG5
         NATIONAL CHARACTER SET ZHT16BIG5
         DATAFILE '/sisdev04/dbs/system01.dbf'      
              SIZE 210M AUTOEXTEND OFF
         , '/sisdev04/dbs/rbs01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/temp01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/users01.dbf'
    SIZE 1050M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ivr01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ivr01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
    I have issue df to check the directory sisuat04
    / >df
    Filesystem 512-blocks Free %Used Iused %Iused Mounted on
    /dev/hd4 98304 45664 54% 2446 10% /
    /dev/hd2 2097152 78992 97% 30280 12% /usr
    /dev/hd9var 65536 20536 69% 308 4% /var
    /dev/hd3 294912 262432 12% 147 1% /tmp
    /dev/hd1 49152 5712 89% 1290 21% /home
    /dev/mfcobol 81920 25520 69% 608 6% /mfcobol
    /dev/magiclv 81920 22304 73% 346 4% /usr/magic
    /dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
    /dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
    /dev/sisappllv 229376 173288 25% 1846 7% /sisappl
    /dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
    /dev/noteslv0 1048576 541352 49% 2195 2% /notes
    /dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
    /dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
    /dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
    /dev/u01lv 4194304 128720 97% 11697 3% /u01
    /dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
    Is is still a not enough space problem?

    I receive the following error by creating dataabse as below sql:
    ORA-01501: CREATE DATABASE failed
    ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
    ORA-27039: create file failed, file size limit reached
    Additional information: 1
    CREATE DATABASE SISDEV04
         LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
              GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
         NOARCHIVELOG
         CHARACTER SET ZHT16BIG5
         NATIONAL CHARACTER SET ZHT16BIG5
         DATAFILE '/sisdev04/dbs/system01.dbf'      
              SIZE 210M AUTOEXTEND OFF
         , '/sisdev04/dbs/rbs01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/temp01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/users01.dbf'
    SIZE 1050M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ivr01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ivr01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
    I have issue df to check the directory sisuat04
    / >df
    Filesystem 512-blocks Free %Used Iused %Iused Mounted on
    /dev/hd4 98304 45664 54% 2446 10% /
    /dev/hd2 2097152 78992 97% 30280 12% /usr
    /dev/hd9var 65536 20536 69% 308 4% /var
    /dev/hd3 294912 262432 12% 147 1% /tmp
    /dev/hd1 49152 5712 89% 1290 21% /home
    /dev/mfcobol 81920 25520 69% 608 6% /mfcobol
    /dev/magiclv 81920 22304 73% 346 4% /usr/magic
    /dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
    /dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
    /dev/sisappllv 229376 173288 25% 1846 7% /sisappl
    /dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
    /dev/noteslv0 1048576 541352 49% 2195 2% /notes
    /dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
    /dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
    /dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
    /dev/u01lv 4194304 128720 97% 11697 3% /u01
    /dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
    Is is still a not enough space problem? i think you have specified 1050m for users01.dbf file, your file system /sisdev04 has something like
    1.5gb of free space. it failed because of lack of free space. may be you can reduce your datafile size or try to
    create in another filesystem.

  • ORA-12709: error while loading create database character set

    I installed Oracle 8.05 on Linux successfully: was able to login
    whith SQLPlus, start and stop the db whith svrmgrl etc.
    During this install I chose WE8ISO8859P9 as the database
    characterset when prompted.
    After that I installed Oracle Application Server 3.02, and now
    I'm getting the
    ORA-12709: error while loading create database character set
    message when I try to start up the database, and the database
    won't mount.
    Platform is RedHat Linux 5.2.
    NLS_LANG set to different settings,
    e.g. AMERICAN_AMERICA.WE8ISO8859P9
    but without success.
    Anyone any clue?
    Thanks!
    null

    Jogchum Reitsma (guest) wrote:
    : I installed Oracle 8.05 on Linux successfully: was able to
    login
    : whith SQLPlus, start and stop the db whith svrmgrl etc.
    : During this install I chose WE8ISO8859P9 as the database
    : characterset when prompted.
    : After that I installed Oracle Application Server 3.02, and now
    : I'm getting the
    : ORA-12709: error while loading create database character set
    : message when I try to start up the database, and the database
    : won't mount.
    : Platform is RedHat Linux 5.2.
    : NLS_LANG set to different settings,
    : e.g. AMERICAN_AMERICA.WE8ISO8859P9
    : but without success.
    : Anyone any clue?
    : Thanks!
    You can create the database with WE8DEC character set
    and to use the WE8ISO8859P9 on the client or even on Linux.
    The NLS_LANG setting doesn't effect the database, but the
    interface with the database. The same setting can be used in de
    windows 95/98/NT registry.
    null

  • ORA-12709: error while loading create database character set after upgrade

    Dear All
    i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
    current application version 12.0.6
    please help me to resolve it.
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 1.2831E+10 bytes
    Fixed Size 2171296 bytes
    Variable Size 2650807904 bytes
    Database Buffers 1.0133E+10 bytes
    Redo Buffers 44785664 bytes
    ORA-12709: error while loading create database character set
    -bash-3.00$ echo $ORA_NLS10
    /u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
    export ORACLE_BASE=/u01/oracle
    export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
    export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
    export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
    export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
    export ORACLE_SID=PROD
    -bash-3.00$ pwd
    /u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
    -bash-3.00$ ls -lh |more
    total 56912
    -rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
    -rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
    -rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
    -rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
    -rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
    -rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
    -rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
    -rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
    -rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
    -rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
    -rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
    -rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
    -rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
    -rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
    -rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
    -rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
    -rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
    -rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
    -rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
    -rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
    -rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
    -rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
    -rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
    -rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
    -rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
    -rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
    -rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
    -rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
    Starting up:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options.
    ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
    System name: SunOS
    Node name: proddb3.zakathouse.org
    Release: 5.10
    Version: Generic_147440-19
    Machine: sun4u
    Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
    System parameters with non-default values:
    processes = 200
    sessions = 400
    timed_statistics = TRUE
    event = ""
    shared_pool_size = 416M
    shared_pool_reserved_size= 40M
    nls_language = "american"
    nls_territory = "america"
    nls_sort = "binary"
    nls_date_format = "DD-MON-RR"
    nls_numeric_characters = ".,"
    nls_comp = "binary"
    nls_length_semantics = "BYTE"
    memory_target = 11G
    memory_max_target = 12G
    control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
    control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
    control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
    db_block_checksum = "TRUE"
    db_block_size = 8192
    compatible = "11.2.0.0.0"
    log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
    log_archive_format = "%t_%s_%r.dbf"
    log_buffer = 14278656
    log_checkpoint_interval = 100000
    log_checkpoint_timeout = 1200
    db_files = 512
    db_file_multiblock_read_count= 8
    db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
    db_recovery_file_dest_size= 14726M
    log_checkpoints_to_alert = TRUE
    dml_locks = 10000
    undo_management = "AUTO"
    undo_tablespace = "APPS_UNDOTS1"
    db_block_checking = "FALSE"
    session_cached_cursors = 500
    utl_file_dir = "/usr/tmp"
    utl_file_dir = "/usr/tmp"
    utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
    utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
    utl_file_dir = "/usr/tmp"
    plsql_code_type = "INTERPRETED"
    plsql_optimize_level = 2
    job_queue_processes = 2
    cursor_sharing = "EXACT"
    parallel_min_servers = 0
    parallel_max_servers = 8
    core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
    audit_file_dest = "/u01/oracle/admin/PROD/adump"
    db_name = "PROD"
    open_cursors = 600
    pga_aggregate_target = 1G
    workarea_size_policy = "AUTO"
    optimizer_secure_view_merging= FALSE
    aq_tm_processes = 1
    olap_page_pool_size = 4M
    diagnostic_dest = "/u01/oracle"
    max_dump_file_size = "20480"
    Tue Jan 15 16:16:02 2013
    PMON started with pid=2, OS id=18608
    Tue Jan 15 16:16:02 2013
    PSP0 started with pid=3, OS id=18610
    Tue Jan 15 16:16:03 2013
    VKTM started with pid=4, OS id=18612 at elevated priority
    VKTM running at (10)millisec precision with DBRM quantum (100)ms
    Tue Jan 15 16:16:03 2013
    GEN0 started with pid=5, OS id=18616
    Tue Jan 15 16:16:03 2013
    DIAG started with pid=6, OS id=18618
    Tue Jan 15 16:16:03 2013
    DBRM started with pid=7, OS id=18620
    Tue Jan 15 16:16:03 2013
    DIA0 started with pid=8, OS id=18622
    Tue Jan 15 16:16:03 2013
    MMAN started with pid=9, OS id=18624
    Tue Jan 15 16:16:03 2013
    DBW0 started with pid=10, OS id=18626
    Tue Jan 15 16:16:03 2013
    LGWR started with pid=11, OS id=18628
    Tue Jan 15 16:16:03 2013
    CKPT started with pid=12, OS id=18630
    Tue Jan 15 16:16:03 2013
    SMON started with pid=13, OS id=18632
    Tue Jan 15 16:16:04 2013
    RECO started with pid=14, OS id=18634
    Tue Jan 15 16:16:04 2013
    MMON started with pid=15, OS id=18636
    Tue Jan 15 16:16:04 2013
    MMNL started with pid=16, OS id=18638
    DISM started, OS id=18640
    ORACLE_BASE from environment = /u01/oracle
    Tue Jan 15 16:16:08 2013
    ALTER DATABASE MOUNT
    ORA-12709 signalled during: ALTER DATABASE MOUNT...

    ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
    Please see these docs.
    ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
    Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
    Ora-12709 While Trying To Start The Database [ID 311035.1]
    ORA-12709 when Mounting the Database [ID 160478.1]
    How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
    Thanks,
    Hussein

  • ORA-2002 : error while writing to audit trail

    Hi all ,
    I am oracle 11g and on SPARC OS.
    I enabled audit in my database by setting the parameter audit_trail=DB and then i restarted my instance.
    On doing so the database started but whenever i am trying to connect using pl/sql developer , i am getting the following list of errors :
    ORA-00604 : error occured at recursive SQL level 1
    ora-00904 : "DBID" invalid identifier
    Ora-02002 : error while writing to audit trail
    ORA-00604 : error occured at recursive SQL level 1
    ora-00904 : "DBID" invalid identifier
    I checked on the net for ora-02002 and increased the size of the system tablespace from 750 M to 1000M.
    My system tablespace is dictionary managed.
    bounced the database also , but still getting the same errors.
    please help
    regards
    KKukreja
    Edited by: ~JuniorDBA~ on Dec 20, 2010 8:59 PM

    Hi Nicolas,
    here is the output
    SQL> desc sys.aud$
    Name                                      Null?    Type
    SESSIONID                                 NOT NULL NUMBER
    ENTRYID                                   NOT NULL NUMBER
    STATEMENT                                 NOT NULL NUMBER
    TIMESTAMP#                                         DATE
    USERID                                             VARCHAR2(30)
    USERHOST                                           VARCHAR2(128)
    TERMINAL                                           VARCHAR2(255)
    ACTION#                                   NOT NULL NUMBER
    RETURNCODE                                NOT NULL NUMBER
    OBJ$CREATOR                                        VARCHAR2(30)
    OBJ$NAME                                           VARCHAR2(128)
    AUTH$PRIVILEGES                                    VARCHAR2(16)
    AUTH$GRANTEE                                       VARCHAR2(30)
    NEW$OWNER                                          VARCHAR2(30)
    NEW$NAME                                           VARCHAR2(128)
    SES$ACTIONS                                        VARCHAR2(19)
    SES$TID                                            NUMBER
    LOGOFF$LREAD                                       NUMBER
    LOGOFF$PREAD                                       NUMBER
    LOGOFF$LWRITE                                      NUMBER
    LOGOFF$DEAD                                        NUMBER
    LOGOFF$TIME                                        DATE
    COMMENT$TEXT                                       VARCHAR2(4000)
    CLIENTID                                           VARCHAR2(64)
    SPARE1                                             VARCHAR2(255)
    SPARE2                                             NUMBER
    OBJ$LABEL                                          RAW(255)
    SES$LABEL                                          RAW(255)
    PRIV$USED                                          NUMBER
    SESSIONCPU                                         NUMBERsince i took over the database , no one did anything ... i only truncated the aud$ table today.
    But while going through the files i came across a SQL file that had this content :
    more move_audit.sql
    create table system.aud$
    tablespace AUD_TSP
    as select * from aud$;
    create index system.i_aud1 on system.aud$(sessionid, ses$tid);
    rename aud$ to aud$_temp;
    create view aud$ as
    select * from system.aud$;
    connect system/XXXXX
    grant all on aud$ to sys with grant option;
    grant delete on aud$ to delete_catalog_role;Now I am not sure what has happened and who has done what,but when i checked on TOAD, system tablespace had aud$ table and there was no table in tablespace AUD_TSP.
    thanks and regards
    Kkukreja
    Edited by: ~JuniorDBA~ on Dec 21, 2010 12:55 AM

  • Error while posting Down Payment

    Hi,
    I got error while posting down payment in F-48. the error was "Special G/L Indicator P is not defined for down payment".
    Thanks,

    Hello,
    "Special G/L Indicator P is not defined for down payment" because you have not maintained this indicator in your system. For maintain this you go to TC: OBYR, dbl down payment indicator P, , give your chart of accounts and press enter. Here you have to give normal Recon A/c and Alternative Recon A/c and save it. Now, go to TC: F-48 and you will able to post it now.
    Thanks
    Para

  • ORA-19870: error while restoring backup piece -- file exists in ASM

    [oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: MDM (DBID=1485385044)
    connected to auxiliary database: MDM (not mounted)
    RMAN> duplicate target database for standby;
    Starting Duplicate Db at 29-OCT-10
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=13 device type=DISK
    contents of Memory Script:
    restore clone standby controlfile;
    executing Memory Script
    Starting restore at 29-OCT-10
    using channel ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
    channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
    ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
    ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
    ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
    failover to previous backup
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06024: no backup or copy of the control file found to restore
    RMAN>
    ASMCMD [+mdmdg2] > cd mdm1
    ASMCMD [+mdmdg2/mdm1] > ls
    CONTROLFILE/
    FLASHBACK/
    ONLINELOG/
    arch/
    autobackup/
    ASMCMD [+mdmdg2/mdm1] > cd autobackup
    ASMCMD [+mdmdg2/mdm1/autobackup] > ls
    2010_10_29/
    ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
    ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
    s_733654605.283.733654607
    As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
    and also How to open/view file in asmcmd

    [oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
    SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup;
    ORA-01078: failure in processing system parameters
    ORA-29701: unable to connect to Cluster Synchronization Service
    I have rebooted both the RAC servers and I can't start database?
    I was under the impression that Database should be automatically started as part of Clusterware
    Please help urgent.

  • Pipelined function with Union clause(Invalid Number(ORA-01722) error )

    Hi,
    I have a pipelined function.
    I am fetching the data with the use of a REF cursor.
    The query has two part: query1 and query2
    when I am opeing the cursor with query1 UNION query2,it is giving me Invalid Number(ORA-01722) error.
    but when I open the cursor separately for query1 and query2,I am getting the resultset for each of the query.
    query1 and query2 are running fine with UNION in the sql editor.
    But,when I put them into two variables (var1 :='query1' and var2:='query2' and try to open the cursor with var1 UNION var2 , it's giving me the error.
    But when I put query2 as 'Select ..... from dual' and then try to open the cursor for query1 UNION query2,
    then getting the result of query1 and one extra row for query2(dual).
    The FROM table set is same for query1 and query2..
    can anyone please help me , why this Invalid Number(ORA-01722) error is coming.

    query1 := 'SELECT to_char(st.store_no) STORE_NUMBER,pp.name PROGRAM_NAME, ''HBS'' DISPENSING_SYSTEM,
    pt.PATIENT_SRC_NO SOURCE_ID, null RX2000_PATIENT_IDENTIFIER, pt.last_name PATIENT_LAST_NAME, pt.first_name
    PATIENT_FIRST_NAME, to_char(LPAD (pppd.rx_number, 7, '' '')|| ''-''|| LPAD (pppd.refill_number, 2, 0)) RX_REFILL
    FROM
    pega_patient_program_dispense pppd,pega_patient_program_reg pppr,health_care_profs hcp1,
    health_care_profs hcp2,prescription_dispenses pd,prescriptions p, pega_program_status_reason ppsr ,master_doctors md,
    prescription_disp_orders pdo, hbs_shipment_extract hse,stores st,master_stores ms,pega_programs pp,patients pt,master_patients mpt
    WHERE
    pppr.referring_hcp_id=md.id(+) and md.dispensing_system_id=hcp1.hcp_id and
    pppr.ID=pppd.PEGA_PATIENT_PROGRAM_REG_ID and pppd.prescription_dispense_id=pd.id and pd.prescriptions_id=p.id and
    p.hcp_id=hcp2.hcp_id and ppsr.ID=pppd.PEGA_PROGRAM_STATUS_REASON_ID and pppd.prescription_dispense_id = pdo.prescriptions_dispenses_id(+) AND
    pdo.shipment_number = hse.shp_no(+) and pppd.store_id=ms.id and st.id=ms.dispensing_system_id and pppr.pega_program_id=pp.id
    and pppr.patient_id=mpt.id and pt.patient_id=mpt.dispensing_system_id and pppd.dispensing_system=''HBS'' and pp.name LIKE ''REV%''
    AND
    ((pppd.prescription_dispense_id IS NOT NULL AND pppd.quantity_dispensed > 0 AND pppd.reported_date IS NULL AND
    pppd.src_delete_date IS NULL AND ((pppr.program_specific_patient_code IS NULL ) OR (hcp1.last_name IS NULL) OR
    (hcp1.first_name IS NULL) OR (hcp2.first_name IS NULL) OR (hcp2.last_name IS NULL) OR (hcp2.address_1 IS NULL) OR
    (hcp2.city IS NULL) OR (hcp2.state_cd IS NULL) OR (hcp2.zip_1 IS NULL)OR (pppr.referral_date is NULL) OR
    (hcp1.state_cd IS NULL) OR (hcp1.zip_1 IS NULL)
    OR (hcp2.zip_1 IS NULL) OR (pppr.last_status_change_date IS NULL) OR (pppr.varchar_1 IS NULL) OR
    (pppr.varchar_7 IS NULL OR pppr.varchar_7 LIKE ''NOT AVAILABLE AT REFERRAL%'') OR (pppr.varchar_5 IS NULL OR
    pppr.varchar_5 LIKE ''NOT AVAILABLE AT REFERRAL%'')) ) AND ppsr.INCLUDE_ON_EXCEPTION_RPT_IND=''Y'')
    OR
    ((pppd.authorization_number IS NULL OR NVL(TRUNC(pdo.shipped_date),TRUNC(hse.shp_act_date_dt)) NOT BETWEEN
    TRUNC(pppd.date_1) AND TRUNC(pppd.date_2)) OR (pppd.varchar_4 IS NULL OR NVL(TRUNC(pdo.shipped_date),
    TRUNC(hse.shp_act_date_dt)) NOT BETWEEN TRUNC(pppd.date_3) AND TRUNC(pppd.date_5)))
    OR
    (pppr.pega_program_competitors_id IS NULL AND (ppsr.manufacturer_status=''TRIAGE'' AND ppsr.manufacturer_reason=''COMPETITOR''))
    OR
    (ppsr.manufacturer_reason IS NULL)
    query2 := ' SELECT ''150'' STORE_NUMBER,''test'' PROGRAM_NAME , ''RX2000'' DISPENSING_SYSTEM
    ,''01'' SOURCE_ID, null RX2000_PATIENT_IDENTIFIER, ''test'' PATIENT_LAST_NAME, ''test'' PATIENT_FIRST_NAME,
    ''rx01'' RX_REFILL
    FROM
    pega_patient_program_reg pppr,health_care_profs hcp1, pega_program_status_reason ppsr ,
    master_doctors md,stores st,master_stores ms,pega_programs pp,patients pt,master_patients mpt
    WHERE
    pppr.referring_hcp_id=md.id(+) and md.dispensing_system_id=hcp1.hcp_id and
    ppsr.ID=pppr.REFERRAL_STATUS_ID and st.store_type=''M'' and pppr.store_id=ms.id and st.id=ms.dispensing_system_id
    and pppr.pega_program_id=pp.id and pppr.patient_id=mpt.id and pt.patient_id=mpt.dispensing_system_id and pp.name LIKE ''REV%''
    AND
    ((((pppr.program_specific_patient_code IS NULL ) OR (hcp1.last_name IS NULL) OR (hcp1.first_name IS NULL) OR
    (pppr.referral_date is NULL) OR (hcp1.state_cd IS NULL) OR (hcp1.zip_1 IS NULL) OR (pppr.last_status_change_date IS NULL)
    OR (pppr.varchar_1 IS NULL) OR (pppr.varchar_7 IS NULL) OR (pppr.varchar_5 IS NULL OR pppr.varchar_5 LIKE
    ''NOT AVAILABLE AT REFERRAL%'')) ) AND ppsr.INCLUDE_ON_EXCEPTION_RPT_IND=''Y'')
    OR
    (pppr.pega_program_competitors_id IS NULL AND (ppsr.manufacturer_status=''TRIAGE'' AND ppsr.manufacturer_reason=''COMPETITOR''))
    OR
    (ppsr.manufacturer_reason IS NULL)
    AND
    pppr.id NOT IN(select pppd.PEGA_PATIENT_PROGRAM_REG_ID from PEGA_PATIENT_PROGRAM_DISPENSE pppd)';
    BUT IF I put
    query2 := ' SELECT ''150'' STORE_NUMBER,''test'' PROGRAM_NAME , ''RX2000'' DISPENSING_SYSTEM
    ,''01'' SOURCE_ID, null RX2000_PATIENT_IDENTIFIER, ''test'' PATIENT_LAST_NAME, ''test'' PATIENT_FIRST_NAME,
    ''rx01'' RX_REFILL
    FROM DUAL';
    then it is giving result.

Maybe you are looking for