Error while Driving a view using parameters from other view
Hi,
I have created a report with streamlist and Barchart view.Driving option is used in streamlist to drive the barchart. The driving works well untill i dont use any filters in the Streamlist.Once i use parameters in streamlist , the driving works only for the default values set.When Second set of values are chosed for the parameter,the values are displayed correctly , but once they are selected for driving,the current values are replaced by the results of the default parameter settings.
I have already done the tutorials for driving and it worked well untill i use filters in the main view,from where the driving is done.
I would really appreciate if someone could give a solution for this problem.
Regards,
Lathika
Hi,
Login as i.e. sys as sysdba. Standard password is change_on_install.
Or you can login in using user that has CREATE VIEW WITH ADMIN OPTION and then grant CREATE VIEW privilege to user to want.
Peter D.
Similar Messages
-
Error while migrating charecter set using CSALTER from WE8MSWIN1252 to UTF8
Hi.
I tried to migrate with my database. I did backup, started in restricted mode the database.
when I run csalter.plb script I got:
SQL> @@csalter.plb
0 rows created.
Function created.
Function created.
Procedure created.
This script will update the content of the Oracle Data Dictionary.
Please ensure you have a full backup before initiating this procedure.
Would you like to proceed ?(Y/N)?Y
old 5: if (UPPER('&conf') 'Y') then
new 5: if (UPPER('Y') 'Y') then
Enter value for 1: UTF8
old 8: param1 := '&1';
new 8: param1 := UTF8';
Checking data validility...
TOCHAR is not superset of FROMCHAR
PL/SQL procedure successfully completed.
0 rows deleted.
Alter database character set....
Checking or Converting phrase did not finish successfully
No database (national) character set will be altered
PL/SQL procedure successfully completed.
SQL>
What should I type where I got "Enter value for 1:" ??
I have already done this with ANOTHER DATABASE with same Oracle version(10.1.0.2.0) and now application working fine, but now i am getting this problem.
How to correct my mistake ?? and what should i do to do it successfullyI recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz -
TMADMIN_CAT:188: ERROR: Error while obtaining the Bulletin Board parameters
Hi ,everybody
When I created and configured a App server domanin with PSADMIN, these errors below occurred,but log files didn't have useful info:
PeopleSoft Domain Boot Menu
Domain Name: HCMDOM
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Archived a copy of the domain configuration to /appfs/people/opt/PS/PS_CFG_HOME/appserv/HCMDOM/Archive/psappsrv.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
TMADMIN_CAT:188: ERROR: Error while obtaining the Bulletin Board parameters
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the domain log file? (y/n) [n] :y
PSADMIN.23310 (0) [11/30/12 10:58:42](0) Begin boot attempt on domain HCMDOM
PSADMIN.23310 (0) [11/30/12 10:58:42](0) End boot attempt on domain HCMDOM
Do you wish to see the error messages in the Tuxedo log file? (y/n) [n] : y
105842.peoplesoft.ynby.cn!PSADMIN.23310: Begin attempt on domain HCMDOM
105842.peoplesoft.ynby.cn!PSADMIN.23310: End boot attempt on domain HCMDOM
Press Enter to continue...
Don't know how to solve it ...Hi,Nicolas
Before I booted up the app server ,I set the environment variable PS_CFG_HOME to /appfs/people/opt/PS/PS_CFG_HOME,and the above error occured,but when I unset the PS_CFG_HOME,it booted up successfully.But another error occured when booted up :
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 232457 -D TESTSERV -S PSMONITORSRV : Failed.
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
exec tmshutdown -qy
I checked the pemission to boot up app server :
SQL> SELECT CLASSID, STARTAPPSERVER FROM PSCLASSDEFN WHERE CLASSID IN (SELECT OPRCLASS FROM PSOPRCLS WHERE OPRID='PS');
CLASSID STARTAPPSERVER
PSAPPS 1
EOEN9000 1
EOCO9000 1
PTPT1100 1
PTPT1200 1
PTPT1300 1
and update:
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PSAPPS';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE
CLASSID='EOEN9000';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE
CLASSID='EOCO9000';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1100';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1200';
1 row updated.
SQL> UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='PTPT1300';
1 row updated.
After doing these,it booted up with the error:
exec PSRENSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSRENSRV :
Failed.
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
Then I configured the REN server :
Values for config section - PSRENSRV
log_severity_level=Warning
io_buffer_size=8192
default_http_port=7180
default_https_port=7143
default_auth_token=<my hostname>
Boot up app server again :
Booting server processes ...
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 42933 -D TESTSERV -S PSWATCHSRV :
process id=24245 ... Started.
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D TESTSERV -S PSAPPSRV :
process id=24246 ... Started.
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D TESTSERV -S PSAPPSRV :
process id=24256 ... Started.
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSSAMSRV :
process id=24266 ... Started.
exec PSRENSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D TESTSERV -S PSRENSRV :
process id=24273 ... Started.
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 42933 -D TESTSERV -S PSMONITORSRV :
process id=24279 ... Started.
exec WSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //<my hostname>:7000 -z 0 -Z 0 -I 5 -T 60 -m 1 -M 3 -x 40 -c 5000 -p 7001 -P 7003 :
process id=6834 ... Started.
7 processes started.
Here is my configurations:
OS:RHEL 5.4
DATABASE:ORACLE Database 11.2.0.1
Peoplesoft Tools: 8.52
Application version:HCM 9.1
Domain configuration:
Quick-configure menu -- domain: HCMAPP
Features Settings
========== ==========
1) Pub/Sub Servers : No 16) DBNAME :[PEOPDB]
2) Quick Server : No 17) DBTYPE :[ORACLE]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : No 19) UserPswd :[PS]
5) Jolt Relay : No 20) DomainID :[TESTSERV]
6) WSL : Yes 21) AddToPATH :[.]
7) PC Debugger : No 22) ConnectID :[people]
8) Event Notification: Yes 23) ConnectPswd:[peop1e]
9) MCF Servers : No 24) ServerName :[<my hostname>]
10) Perf Collator : No 25) WSL Port :[7000]
11) Analytic Servers : No 26) JSL Port :[9000]
12) Domains Gateway : No 27) JRAD Port :[9100]
It seems OK,But when I tested the 3-tier connection :
It prompted: Could not connect to appliaction server HCMAPP.possible causes are:the server name/IP address and port for the application server alias are incorrect....
Contect your system administrator to check the Tuxedo log for more information
But I can sign on the database using Application Designer,and app server already booted up.
Additional ,the Tuxedo and Weblogic were installed within different directorys,does it matter?
Do you need more configuration info?
Thanks for you to reply my questions ~ -
Error while creating resource group using non-globalzones.
Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AMHi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil -
Error while accessing excel file using ODBC
Hi
I am getting the below error message while accessing excel sheet using ODBC from Oracle:
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from EXCL
Can anyone help me on this...
Cheers
Pradeep
Message was edited by:
user634393Hi
Thank you.Is there a way to read a file which is existing in the war file.
Regards
Anand Mohan
"Wenjin Zhang" <[email protected]> wrote:
>
>In Weblogic, if your files are archived in a WAR, you cannot get an entry
>as individual
>file since it is only bytes in a large archive file. So getRealPath will
>give
>you null result. If you only want the path, try to use other getXXXPath,
>getURL,
>or getURI method. If you want to read the content, use getResource.
>
>
>"Anand" <[email protected]> wrote:
>>
>>Hi
>>I am having problem while accessing the file located in the server from
>>a JSP
>>page. I am not getting the RealPath from a JSP page using getRealPath(request.getServletpath()).
>>
>>The same code is working if the jsp placd under defaultwebApp directory
>>and not
>>working if i create a war and deploy the same.
>>
>>I am using weblogic server 7.0 trail version.I am setting the context
>>path also.
>>
>>Can any help me in this regard.
>>
>>Thank And Regards
>>
>>Anand Mohan
>
-
Error while refreshing BO objects using live office
Hi Forum,
We are getting below error while refreshing the data using Live Office plug-in on PPT.
“An error occurred while receiving the HTTP response to http://........ This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server.”
This error comes in exact 5 minutes.
The server name used for web service is from a clustered environment. When the individual node is used Live office refresh works fine but while using the generic name refresh fails.
Please provide your inputs.Hi Honed,
Take the backup of dsws.properties file and do the following changes:
properties values
domain @<clustername>
session.timeout value higher than 5 minutes
Below pdf can help you further:
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_wssdk_admin_en.pdf
Regards,
Yuvraj -
Error while trying to delete the universe from CMS
Dear All,
I am getting "Unable to reconnect to the CMS XXXXXXXXX. The session has been logged off or has expired" error while trying to delete any universe from the CMS. I tried restarting tomcat but it didnt work. I am unable to delete any universe from CMS. We have BO XI R2 SP2 environment on Windows 2003 Server.
regards,
UmairSAP NOTE - 1199539 gives a possible solution to this problem:
When attempting to delete or migrate a universe, the following error message appears:
"Unable to reconnect to the CMS BUSOBJDV.ACSAD.NCSU.EDU. The session has been logged off or has expired."
Environment
BusinessObjects Enterprise Premium XI Release 2 SP1 CHF15
JDK version 1.4.2_08
Tomcat version is the same as that shipped with the product
Cause
The universes and connection pages are special (AFAIK) compared to the other pages because they are pure JSP, while most of the other Central Management Console (CMC) pages still go though the CMC and use COM/C++ code unaffected by the Java Virtual Machine (JVM). If the JVM has not been updated against Eastern Daylight Savings Time (EDST), it may calculate the incorrect time locally, and problems may occur with token expiry or validation.
Resolution
Update the Tomcat JDK to JDK 1.5.0_11 for EDST:
1. Go to the Microsoft web site and verify if you have the time zone update installed.
2. Download JDK 1.5.0_11.
3. Install JDK 1.5.0_11 on your server.
4. Modify the JAVA_HOME here:
C:\Program Files\Business Objects\Tomcat\bin\setenv.bat
as follows:
set JAVA_HOME=C: \Program Files\Java\jdk1.5.0_11\jre
5. In Java Virtual Machine and Java Class Path, modify JAVA properties for Tomcat (Start > Programs > Tomcat > Tomcat Configuration > Java). Replace the default Business Objects JDK 1.4 directory:
C:\Program Files\Business Objects\j2sdk1.4.2_08
with JDK 1.5.0_11:
C:\Program Files\Java\jdk1.5.0_11
6. Go to Windows Time Zone (double-click Windows time) then on the Time Zone tab, select the automatically adjust clock for day light saving changes check box against EST time zone.
7. Restart Tomcat and the Central Management Server (CMS) and, if possible, reboot your computer.
Hope this works anyone facing this problem on Windows servers.
Not sure what the solution is for BO instances running on Solaris. We have business objects/Weblogic running on a solaris server. I tried just changing java home to jdk1.5.0_12 but this didn't work. -
Errors while starting admin server using WLST and NodeManager
Hi I am trying to start admin server using WLST and NodeManager. I started nodemanager and WLST successfully. but when I am trying to nmConnect() command I am getting below errors. Please any one tell me where am I going wrong? I copied dumpStack() optput as well..
thanks
manohar
C:\oracle\Middleware\wlserver_10.3\server\bin>
C:\oracle\Middleware\wlserver_10.3\server\bin>java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic','weblogic','localhost','5556')
Connecting to Node Manager ...
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
loading of the trusted certificate list raised a certificate parsing exception
PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.
\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate p
arsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.84
0.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node
Manager. : I/O error while reading domain directory
Use dumpStack() to view the full stacktrace
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline> dumpStack()
This Exception occurred at Tue May 03 10:45:03 EDT 2011.
weblogic.nodemanager.NMException: I/O error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:299)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:312)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.jav
a:248)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.
java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(Nod
eManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManage
rService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx16.f$0(<console>:1)
at org.python.pycode._pyx16.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
weblogic.nodemanager.NMException: I/O error while reading domain directory
wls:/offline>
wls:/offline>Hi manohar,
Please try the following article... (With Node Manager Communication type as "Plain" because it looks like you are getting PKIX security certificate chain message ) Just to isolate the issue
Topic: Start AdminServer And NodeManager Using WLST
http://middlewaremagic.com/weblogic/?p=6580
Thanks
Ravish Mody -
Error while starting the OA using opmnctl
HI,
Am a Beginner on OAS.Am facing a error while starting the application using ./opmnctl startall.
opmnctl: starting opmn and all managed processes...
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
opmnctl: opmn start failed
Not able to select the components using console.
Can you help me to resolve
Edited by: Tarunkudikala on Feb 26, 2009 3:25 AMWhy not better put that info ???
If you are installing Oracle Application Server in a DHCP network you must use a loopback configuration. To access the Oracle Application Server, you need to use a local browser. Perform the following steps to install Oracle Application Server in a DHCP network:
1.
Find the IP address allocated from the DHCP server by running the following command:
$ /sbin/ifconfig -a
The IP address is associated with the interface configured to use DHCP.
2.
Configure the host to resolve hostname to loopback IP address:
1.
Configure the host to resolve hostname to loopback IP address, by modifying the /etc/hosts file to contain the following entries:
127.0.0.1 hostname.domainname hostname
127.0.0.1 localhost.localdomain localhost
2.
Check that the hostname resolves to the loopback IP address by entering the following command:
$ /bin/ping hostname.domainname
---------------------- -
Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name: Security
Source: Microsoft-Windows-Eventlog
Date: 1/15/2015 11:12:39 AM
Event ID: 1108
Task Category: Event processing
Level: Error
Keywords: Audit Success
User: N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2....Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time. -
Error while accessing menus in Runtime workbench from SLD
Hi I am getting following error while accessing menus in runtime workbench from SLD.( example: SLD->runtime workbench->component monitorung ->display)
"Error during communication with System Landscape Directory: User credentials are invalid or user is denied access "
I am using PISUPER to login to SLD and i am able to login to XI using this ID. I could find role -SAP_XI_RWB_SERV_USER - also in the user id profile of PISUPER.Hi Karthik,
Check if the roles are generated. Or ask your basis team to check.
IF the roles are generated then you have to check if exchange profile if the right username is mentioned or not. IF username is right then reenter the password.
Check the following parameter in exchange profile.
com.sap.aii.rwb.serviceuser.name
com.sap.aii.rwb.serviceuser.pwd
Regards,
Sumit
Edited by: Sumit Khetawat on Dec 28, 2007 11:52 AM -
Error while raising a invoice using VF01
Hi,
I am getting an error while raising a invoice using VF01.
Error as follows
RV_MESSAGE_UPDATE
Update was terminated
System ID.... TIP
Client....... 300
User..... user1
Transaction.. VF01
Update key... E66E6454075548D8922BAC091E81F0CB
Generated.... 18.07.2007, 18:57:38
Completed.... 18.07.2007, 18:57:38
Error info... TD 443: WRITE_FORM
Pls help
Points will be rewarded.
ThanksHi,
This is an ABAP short dump. If you go through the error log, there will be a section where in you can see > What caused the problem.
Try to analyze this log and you can find a solution. Probably, you can also check whether there is any OSS note with this error message.
Thanks
Murali. -
Error while importing music in iMovie 11 From itunes 10
Error while importing music in iMovie 11
I have the same error explained in a other post which was still left unanswered
I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
after dragging a mp3 into it. When i preview the file in imovie it souds ok.
Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
Is there a solution for this problem?
Former post;
Re: Error while importing music in iMovie 09 from iTunes 09
Posted: Jul 24, 2010 8:08 AM in response to: vincentplaces
I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
There is one icon missing though.
As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
Any help guys?
iMac 27" Mac OS X (10.6.4)Hi
Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
I do
• In iTunes - collect needed audio into a new Playlist
• then burn this out as an Audio-CD .aiff (NOT .mp3)
• This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
• And then I drag and drop these .aiff files into my movie project in iMovie.
This works Greatly and even more so when I do my DVD.
Yours Bengt W -
APEX 4.0: error while opening a XLS file downloaded from interactive report
Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
MukeshHi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep -
Error while importing music in iMovie 09 from iTunes 10
I have the same error explained in a other post which was still left unanswered
I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
after dragging a mp3 into it. When i preview the file in imovie it souds ok.
Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
Is there a solution for this problem?
Former post;
Re: Error while importing music in iMovie 09 from iTunes 09
Posted: Jul 24, 2010 8:08 AM in response to: vincentplaces
I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
There is one icon missing though.
As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
Any help guys?
iMac 27" Mac OS X (10.6.4)Made a mistake in the title, version of imovie is 11
Maybe you are looking for
-
Hello, This is regarding New F.Y 2010. I have opend new F.Y 2010 -11 and C/F all G/L and customer and vendor balances. Also opened F.Y 2010 - 11 for Asset. Every thig is OK. Now i have some budget balance for F.Y 2009 - 10. Shall i C/F Balance for 20
-
Hello, If we activate Incoming Sales Order scenario in COPA, then it creates a COPA document when sales order is created or changed. 1. What happens when it is billed, does it creates one more COPA document with new record type F, and also retains th
-
Mavericks upgrade and Canon iR 3225 issues
After the recent upgrade, I can no longer print from my office printer which is a Canno iR 3225. I have tried downloading the "newly updated" drivers from the Canon Asia Website which are supposed to have been updated 23 Oct. I can add the printer th
-
I'm loading a csv file into a table. The first column is a decimal, the second is a timestamp(6), other columns. my csv: 1.0, 2007-12-12 12:23:45,0,0,0,0,0,0,0,0,0,0 I'm getting an error when it trys to load the timestamp ORA-01843: not a valid month
-
MBP Damaged by AppleCare Third Party Repair.... Help?
Hello all, Ok this has escilated all the way to "Executive Relations". I am really lost as to what to do. Last week I called because my brand new MacPro failed, and fried my MBP 17" (two years old). Long story short, the repair company came to pick u