Error while enabling version
Hi All,
While enabling version we are facing error mentioned below:-
BEGIN DBMS_WM.ENABLEVERSIONING(table_name => 'oem', hist => 'VIEW_WO_OVERWRITE'); END; Error at line 1
ORA-20229: statement 'DECLARE
schema varchar2(30) := 'CDR_RND' ;
tab_name varchar2' failed during EnableVersioning. Error:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "WMSYS.LT", line 9177
ORA-06512: at line 1
In think the error started appearing when we have reference of one table in more than 19 tables.
Thanks
Neeraj
Edited by: neeraj_singh on Nov 5, 2009 5:01 AM
Hi Neeraj,
It is hard to tell exactly what might be causing the problem from the description that you gave. If you are not on the latest version of Workspace Manager, I would recommend upgrading as a couple of errors with similar error messages have been fixed in the past.
Otherwise, I would suggest to get a trace of failing session to see if you can determine exactly where it is failing. If not, I would suggest to file a SR.
Regards,
Ben
Similar Messages
-
Getting error while Enable Dashboard Widget
Dear Experts,
I am getting error while Enable Dashboard Widget
u201CInstall SAP Business One Integration Service before enabling the dashboard widgetu201D
Even I follow all step by step process.
Thanks
KamleshHi Kamlesh,
Have you tried the following:
Deactivate the cockpit in your Business One database - Disable My Cockpit and also disable cockpit in General Settings
Run EventSender Setup (in first step try to avoid using localhost or IP addresses)
In third step press Test Connection, in fourth step make sure that your database is checked, press also Receiver but ton and then Test Connecion.
Finish EventSender setup.
Click on SLD in the B1i Framwork and ensure connection to the Company databsae (B1DI and JDBC) is successful.
Go back to B1i Framework UI, click Scenarios in upper menu, then select Control in left menu and (re)activate Xcelsius scenario.
Restart EventSender service, Integration Service and Proxy services via Servies (Computer Management)
Now you can enable cockpit in your Business One database - enable cockpit in General Settings and then enable My Cockpit.
After installation of B1ic, the company is not listed in the SLD
Delete all entries of table SLSP and SLSPP in SBOCOMMON. Restart integration service. In SAP Business refresh the company list.
These solutions are documented in the attached Note 1619422.
Kind regards
Sean -
Error while enabling two way authentication :Client certificate missing
Hi,I am getting the following error while enabling the two way authentication.The weblogic server 5.1 has accepted both the client ca and server certificates and is listening for SSL on the specified port.But when I try to access thru the secured connection thru my IE it asks for Client Authentication dialog asking for valid Client certificate but I am not able to view any of the client certificate even though I have one which is the trusted root store.and there by giving the error page cannot be displayed .On the server side I get the following error.Thu Mar 08 10:54:35 GMT 05:30 2001:<D> <SSLListenThread> Problem accepting connectionjava.io.IOException: required client certificate missing at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:711) at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529) at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219) at weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192) at weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001) at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30) at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377) at weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:506) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)can anybody please guide me what could be wrong.Do I need to change the browser settings.I have enabled SSL 3.0 and SSL 2.0 and all other settings are defaultIt is urgent.pls give some suggestions.Regards,Bhavani
I think you have to specify the client root in your weblogic.properties
file.
here are my settings:
weblogic.security.enforceClientCert=true
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
weblogic.security.clientRootCA=VeriSignClass1CA.der
Regards,
-Arthur
Bhavani <[email protected]> wrote:
Hi,I am getting the following error while enabling the
two way authentication for Weblogic Server 5.1Thu Mar
08 16:10:54 GMT 05:30 2001:<I> <ListenThread> Listening
on port: 7001Thu Mar 08 16:10:54 GMT 05:30 2001:<I> <SSLListenThread>
Listening on port: 7002<NT Performance Pack> NATIVE:
created IoCompletionPort successfully. IoPort=0x000002a4Thu
Mar 08 16:10:56 GMT 05:30 2001:<I> <WebLogicServer> WebLogic
Server startedThu Mar 08 16:11:20 GMT 05:30 2001:<D>
<SSLListenThread> Problem accepting connectionjava.io.IOException:
required client certificate missing at weblogic.security.SSL.SSLSocket.serverInit2(SSLSocket.java:711)
at weblogic.security.SSL.SSLSocket.serverInit(SSLSocket.java:529)
at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:219)
at weblogic.security.SSL.SSLSocket.performAcceptHandshake(SSLSocket.java:192)
at weblogic.security.SSL.SSLSocket.getInputStream(SSLSocket.java:1001)
at weblogic.socket.ResettableSocket.<init>(ResettableSocket.java:30)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java:377)
at weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java:506)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,
Compiled Code)Thu Mar 08 16:12:07 GMT 05:30 2001:<D>
<SSLListenThread> Problem accepting connectionCan anybody
suggest why this error is coming?Regards,Bhavani -
Error while enabling Archivelog mode
There occurs an error while performing startup mount for enabling archive log mode in Windows.
Below are the steps followed:
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Dec 20 16:49:14 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> disconnect;
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> connect sys@epm11 as sysdba;
Enter password: ********
Connected.
SQL> archive log list;
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination D:\oracle\product\10.2.0\flash_recovery_area
Oldest online log sequence 9
Current log sequence 11
SQL> show parameter recovery_file_dest;
NAME TYPE VALUE
db_recovery_file_dest string D:\oracle\product\10.2.0/flash
recoveryarea
db_recovery_file_dest_size big integer 2G
SQL> alter system set log_archive_dest_1='location=D:\oracle\product\10.2.0\flash_recovery_area' sco
pe=spfile;
System altered.
SQL> show parameter log_archive_dest_1;
NAME TYPE VALUE
log_archive_dest_1 string location=D:\oracle\product\10.
2.0\flash_recovery_area
log_archive_dest_10 string
SQL> alter system set log_archive_start=true scope=spfile;
System altered.
SQL> show parameter LOG_ARCHIVE_START;
NAME TYPE VALUE
log_archive_start boolean TRUE
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
Oracle version information is
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 – Production
Please let me know how to resolve this error.
Regards
Swathi.Hi,
Add archive log_archive_dest_1 D:\oracle\product\10.2.0\flash_recovery_area in pfile and then try to start the database.
Also check alert_log for more information.
Added the below info in pfile
log_archive_dest_1='location=D:\oracle\product\10.2.0\flash_recovery_area'
log_archive_start=TRUE
and then performed the process but the same error is giving.
SQL> startup mount;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
And i have checked the alert log which is at location D:\oracle\product\10.2.0\admin\EPM11\bdump
Below information is displayed in the alert log:
Tue Dec 21 12:07:15 2010
Starting background process EMN0
EMN0 started with pid=19, OS id=7500
Tue Dec 21 12:07:15 2010
Shutting down instance: further logons disabled
Tue Dec 21 12:07:15 2010
Stopping background process QMNC
Tue Dec 21 12:07:16 2010
Stopping background process CJQ0
Tue Dec 21 12:07:17 2010
Stopping background process MMNL
Tue Dec 21 12:07:18 2010
Stopping background process MMON
Tue Dec 21 12:07:19 2010
Shutting down instance (immediate)
License high water mark = 16
Tue Dec 21 12:07:19 2010
Stopping Job queue slave processes
Tue Dec 21 12:07:19 2010
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Tue Dec 21 12:07:27 2010
ALTER DATABASE CLOSE NORMAL
Tue Dec 21 12:07:28 2010
SMON: disabling tx recovery
SMON: disabling cache recovery
Tue Dec 21 12:07:28 2010
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 12
Successful close of redo thread 1
Tue Dec 21 12:07:29 2010
Completed: ALTER DATABASE CLOSE NORMAL
Tue Dec 21 12:07:29 2010
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Dump file d:\oracle\product\10.2.0/admin/epm11/bdump\alert_epm11.log
Tue Dec 21 12:20:46 2010
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 2 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1439M/3062M, Ph+PgF:5441M/6994M, VA:1940M/2047M
Tue Dec 21 12:20:46 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 201326592
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = D:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILEEPM11.ORA
sga_target = 612368384
control_files = D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 394264576
compatible = 10.2.0.1.0
log_archive_start = TRUE
log_archive_dest_1 = location=D:\oracle\product\10.2.0\flash_recovery_area
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=EPM11XDB)
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\CDUMP
db_name = EPM11
open_cursors = 300
pga_aggregate_target = 203423744
Deprecated system parameters with specified values:
log_archive_start
End of deprecated system parameter listing
PMON started with pid=2, OS id=1188
PSP0 started with pid=3, OS id=5800
MMAN started with pid=4, OS id=6212
DBW0 started with pid=5, OS id=3920
LGWR started with pid=6, OS id=496
CKPT started with pid=7, OS id=5008
SMON started with pid=8, OS id=692
RECO started with pid=9, OS id=2924
CJQ0 started with pid=10, OS id=1840
MMON started with pid=11, OS id=5520
MMNL started with pid=12, OS id=5212
Tue Dec 21 12:20:47 2010
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Tue Dec 21 12:20:47 2010
alter database mount exclusive
Tue Dec 21 12:20:51 2010
Setting recovery target incarnation to 2
Tue Dec 21 12:20:51 2010
Successful mount of redo thread 1, with mount id 3057552735
Tue Dec 21 12:20:51 2010
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Tue Dec 21 12:20:51 2010
alter database open
Tue Dec 21 12:20:51 2010
Thread 1 opened at log sequence 12
Current log# 2 seq# 12 mem# 0: D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\REDO02.LOG
Successful open of redo thread 1
Tue Dec 21 12:20:51 2010
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Tue Dec 21 12:20:52 2010
SMON: enabling cache recovery
Tue Dec 21 12:20:52 2010
Successfully onlined Undo Tablespace 1.
Tue Dec 21 12:20:52 2010
SMON: enabling tx recovery
Tue Dec 21 12:20:52 2010
Database Characterset is WE8MSWIN1252
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=16, OS id=6268
Tue Dec 21 12:21:00 2010
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Tue Dec 21 12:21:00 2010
Completed: alter database open
Please provide me solution.
Regards
Swathi. -
Error while Enabling Active Data Cache Clustering Services: error 1753
I have installed the Oracle BAM with Enterprise link.All the installation was successful.But while Enabling Active Data Cache Clustering Services using the following command:
cluster.exe restype "Oracle Business Activity Monitoring Active Data Cache" /create /dll:"C:\OracleBAM\ADCClusterResourceType.dll"
i am getting the folllowing error:
System error 1753 has occurred.
There are no more endpoints available from the endpoint mapper.
Although i stopped the Active Data Cache Service..?
I am unable to resolve it
Kindly help me out
Ramesh NambalaHi.
I encountered the same problem. In my case, the reason was that I created a new user for BAM (to be provided when installing BAM) but ran the installation under another user account. It seems like these users must be the same to make it work.
Greetings,
cor -
Error while enabling forien key constraint
HI forum,
I am facing a problem while enabling constraint..pls see the statement below.
SQL> alter table EVENT enable validate constraint EVENT_4FK;
alter table EVENT enable validate constraint EVENT_4FK
ERROR at line 1:
ORA-02298: cannot validate (APPO.EVENT_4FK) - parent keys not
found
EVENT_4FK FK is refering another table and that primary key is existing and it is in enabled ...
Pls help me to solve this issue..
Thanksalter table event enable validate constraint event_4fk exceptions into exceptions;check the offending row(s) in the exceptions table. (See the documentation for how to create an exceptions table if not present).
-
Error while enabling maintenance mode
Hi,
while enabling maintenance mode, the following error arises
sqlplus -s &un_apps/***** @/d01/oracle/visappl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
An error occured while running adsetmmd.sql.
Continue as if it were successfull [No] :
charan[oracle@oraapps VIS_oraapps]$ sqlplus system/manager @$ORACLE_HOME/rdbms/admin/utlrp.sql
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 19 08:15:06 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
unknown SET option beginning "SQLPLUSCOM..."
PL/SQL procedure successfully completed.
Table created.
Table created.
Table created.
Index created.
Table created.
Table created.
SELECT o.obj#, o.type#, o.owner# FROM obj$ o
ERROR at line 2:
ORA-00942: table or view does not exist
SELECT o.obj#, o.type#, u.name AS owner FROM utl_recomp_all_inv o, user$ u
ERROR at line 2:
ORA-00942: table or view does not exist
Package created.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY UTL_RECOMP:
LINE/COL ERROR
60/10 PL/SQL: SQL Statement ignored
61/29 PL/SQL: ORA-00942: table or view does not exist
64/10 PL/SQL: SQL Statement ignored
64/17 PL/SQL: ORA-00942: table or view does not exist
104/7 PL/SQL: SQL Statement ignored
104/14 PL/SQL: ORA-00942: table or view does not exist
183/13 PL/SQL: SQL Statement ignored
184/35 PL/SQL: ORA-00942: table or view does not exist
188/13 PL/SQL: SQL Statement ignored
189/35 PL/SQL: ORA-00942: table or view does not exist
196/13 PL/SQL: SQL Statement ignored
LINE/COL ERROR
197/35 PL/SQL: ORA-00942: table or view does not exist
202/13 PL/SQL: SQL Statement ignored
203/35 PL/SQL: ORA-00942: table or view does not exist
267/10 PL/SQL: SQL Statement ignored
268/42 PL/SQL: ORA-00942: table or view does not exist
361/10 PL/SQL: SQL Statement ignored
420/15 PL/SQL: ORA-00942: table or view does not exist
538/11 PL/SQL: SQL Statement ignored
539/19 PL/SQL: ORA-00942: table or view does not exist
BEGIN utl_recomp.recomp_serial(); END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYSTEM.UTL_RECOMP" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
DECLARE
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_REGISTRY_SYS.VALIDATE_COMPONENTS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ORA-06512: at line 8
=======================================
[oracle@oraapps VIS_oraapps]$ sqlplus system/manager
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 19 08:17:49 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
unknown SET option beginning "SQLPLUSCOM..."
SQL> @/d01/oracle/visappl/fnd/11.5.0/patch/115/sql/AFCORLGS.pls
DOC> | Copyright (c) 2005 Oracle USA, Inc., Redwood Shores, California, USA |
DOC> | All rights reserved. |
DOC> +=======================================================================+
DOC> | FILENAME
DOC> | AFCORLGS.pls
DOC> |
DOC> | DESCRIPTION
DOC> | PL/SQL specification for package: FND_CORE_LOG
DOC> |
DOC> | Core Logging Diagnostic Tool
DOC> |
DOC> |
DOC> | HISTORY
DOC> | 03/22/2005 PDELUNA Created
DOC> |
DOC> *=======================================================================*/
Package created.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
[oracle@oraapps VIS_oraapps]$ sqlplus system/manager
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 19 08:19:49 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
unknown SET option beginning "SQLPLUSCOM..."
SQL> @/d01/oracle/visappl/fnd/11.5.0/patch/115/sql/AFCORLGB.pls
DOC> | Copyright (c) 2005 Oracle USA, Inc., Redwood Shores, California, USA |
DOC> | All rights reserved. |
DOC> +=======================================================================+
DOC> | FILENAME
DOC> | AFCORLGB.pls
DOC> |
DOC> | DESCRIPTION
DOC> | PL/SQL body for package: FND_CORE_LOG
DOC> |
DOC> | Core Logging Diagnostic Tool
DOC> |
DOC> |
DOC> | HISTORY
DOC> | 03/22/2005 PDELUNA Created
DOC> |
DOC> *=======================================================================*/
Warning: Package Body created with compilation errors.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
[oracle@oraapps VIS_oraapps]$ sqlplus system/manager
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 19 08:20:21 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
unknown SET option beginning "SQLPLUSCOM..."
SQL> @/d01/oracle/visappl/fnd/11.5.0/patch/115/sql/AFPFPROB.pls
DOC> | Copyright (c) 1993 Oracle Corporation Redwood Shores, California, USA |
DOC> | All rights reserved. |
DOC> +===========================================================================+
DOC> | FILENAME
DOC> | AFPFPROB.pls
DOC> |
DOC> | DESCRIPTION
DOC> | PL/SQL body for package: FND_PROFILE
DOC> |
DOC> | Maintains the server side cache of profile options.
DOC> |
DOC> | NOTES
DOC> | This module is called by AutoInstall (afprof.drv) on install and
DOC> | upgrade. The WHENEVER SQLERROR and EXIT (at bottom) are required.
DOC> |
DOC> | HISTORY
DOC> | 3/23/93 T Morrow Created
DOC> | 5/27/93 G Buzsaki Updated to 10.X spec
DOC> | 8/25/93 G Buzsaki Added GET_ANY procedure
DOC> | 2/17/94 S Stratton Added security profiles to initialize
DOC> | 4/30/96 T Morrow Added SAVE and SAVE_USER procedures.
DOC> | 03/20/99 S Sung Replaced != with <>
DOC> | 09/18/00 R Tse Added GET_TABLE_VALUE and
DOC> | GET_ALL_TABLE_VALUES functions.
DOC> | 01/03/01 J Cordes Rewrote get_specific() to minimize
DOC> | logical reads. (Bug 1563556)
DOC> | 05/08/01 G Khoury Rewrote find, put, get, get_all_table_values
DOC> | to implement hash_table for caching of
DOC> | fnd_profile_option_values. (Bug 1663264)
DOC> | 11/13/01 R Tse Implemented multiple caches for storing
DOC> | profile values at the 4 different levels.
DOC> *===========================================================================*/
Warning: Package Body created with compilation errors.
Commit complete.
Input truncated to 6 characters
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
[oracle@oraapps VIS_oraapps]$ -
Acrobat standard 9.0 error while enabling commets option using Java script object
I'm using the below java script code in my VB 6.0 application for enabling commets options in the PDF file
Dim oJSO As Object
Set oJSO = mPDDoc.GetJSObject
oJSO.Collab.showAnnotToolsWhenNoCollab = True
It is working fine till Acrobat 8.0. Now I'm trying with Acrobat 9.0 standard edition, it is throwing scripting error 'An unhandled Win32 exception occured in Acrobat.exe[308].
Can anyone suggest the way to enable 'comment' options in Acrobat Standard 9.0 using Java Script Object?
ThanksI get much the same problem with VB6, Acrobat 9 Pro and WinXP SP3. When I single step the line:
oJSO.Collab.showAnnotToolsWhenNoCollab = True
in debug I go to the error handler for my Sub. Inspecting the VB Err object has Number = -2147417851 and Description = "Automation error
The server threw an exception." I get a Microsoft crash notice about Acrobat a short while later.
I've experimented with the JavaScript debugger in Acrobat and you can execute Collab.showAnnotToolsWhenNoCollab = True and reference the value of Collab.showAnnotToolsWhenNoCollab in the console. The problem appears only when accessing Acrobat Javascript through the Interapplication Communication API.
If anyone can help it would be appreciated. I tried Adobe's Acrobat support and they were no help at all. -
Hi.
while blending two versions,
I am getting error like Error:21011:Blender property is not runnable because:the hierarchy set list for the blender is invalid.
Please adviseI've seen 'the hierarchy set list for the blender is invalid' in the past when one of the following blend options was not ticked and a blend was run:
Process Structure
Process Inserts
Process Removes
Process Activations
Process Hierarchy Validation Assignments
Process Properties (all or selected)
Have you got one or more of these options ticked in your blend? If you do which release are you using here (e.g. 11.1.2.3.500 etc)?
The more specific you can be when creating posts, the more likely it is we'll be able to offer accurate tips for debugging -
Error while Enabling a user in OIM
Hi,
I have a requirement where i need to disable and enable OIM users based on a UDF . If the UDF says Active user should be enabled and if it says "deleted" user should be disabled. I'm able to "Disable" a user present in "Active" state but not vice versa. My entity adapter is as follows
statusUpdate(String userKey,String Status){
OIMConnectionManagerImpl oimConn = new OIMConnectionManagerImpl();
tcUserOperationsIntf tcUser = oimConn.getUserAPI();
tcResultSet tcres = null;
HashMap map = new HashMap();
map.put("Users.Key",userKey);
tcres = tcUser.findUsers(map);
String s1=tcres.getStringValue("Users.Status");
if(Status.equalsIgnoreCase("Active") )
if(s1.equalsIgnoreCase("Disabled")){
tcUser.enableUser(Long.parseLong(userKey));
if(Status.equalsIgnoreCase("Deleted") )
if(s1.equalsIgnoreCase("Active")){
tcUser.disableUser(Long.parseLong(userKey));
My error is as follows
[com.oim.util.OIMConnectionManagerImpl] Unable to create factory instance
java.lang.NullPointerException
Edited by: user10665408 on Jul 1, 2009 3:14 PMI have done sm changes now:
Try this.
If some import is missing or some spelling mistakes are there just correct those. It's just for reference.
Put import for map also.
package com.Tst.oim;
import Thor.API.Operations.tcUserOperationsIntf;
import Thor.API.tcResultSet;
import Thor.API.tcUtilityFactory;
import com.thortech.xl.crypto.tcCryptoUtil;
import com.thortech.xl.crypto.tcSignatureMessage;
import com.thortech.xl.util.config.ConfigurationClient;
import java.util.Hashtable;
public class CreateFile {
tcUtilityFactory utilFactory = null;
tcSignatureMessage moSignature = null;
tcUserOperationsIntf moUserUtility = null;
tcResultSet userResultSet = null;
ConfigurationClient.ComplexSetting myConfig =
ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
final Hashtable env = myConfig.getAllSettings();
public void Enable(String userid) {
try {
System.out.println("TRY");
moSignature = tcCryptoUtil.sign("xelsysadm", "PrivateKey");
utilFactory = new tcUtilityFactory(env, moSignature);
moUserUtility = (tcuserOperations)utilfactory.getutility("Thor.API.Operations.tcUserOperations");
Map a = new HashMap();
a.put("Users.User ID", userid);
tcResultSet userset = moUserUtility.findAllUsers(a);
long ukey = userset.getLongValue("Users.Key");
moUserUtility.enableuser(ukey);
} catch (Exception e) {
e.printStackTrace();
Edited by: Dost -
Getting Error while enabling CDC on the database
Hi Experts,
I am trying to enable CDC on my database but i am getting error message like below, can anyone please suggest on this .
The server principal "XXXX." is not able to access the database "ABC" +under the current security context.
Could not update the metadata that indicates database XYZ is enabled for Change Data Capture. The failure occurred when executing the command 'sp_cdc_create_objects'. The error returned was 3616: 'An error was raised during trigger execution. The batch has
been aborted and the user transaction, if any, has been rolled back.'. Use the action and error to determine the cause of the failure and resubmit the request.
Thanks in Advance.
Niraj SevalkarHi Finally i got my answer, There is an DDL trigger which restricting me to enable CDC .....
And ABC is an auditing database?
Unless your DBA is evil and really don't want you to enable CDC, I think you should talk with and fix the bad trigger. You can refer him to this article for a proper solution:
http://www.sommarskog.se/grantperm.html
Erland Sommarskog, SQL Server MVP, [email protected]
Yes there was an trigger on the XYZ database which was references details in ABC database db so that was restricting me to do this. thank you for your article .... :)
Niraj Sevalkar -
Error while enabling Delta on HCM_Stageing_Area
Hi,
I'm reading an Import File and trying to enable delta. Unfortunately it fails with following error messages:
Error inserting entry in delta. DN:
java.sql.SQLException: ORA-01400: cannot insert NULL into ("MXMC_OPER"."LOGENTRIES"."DN")
And:
Error selecting record in delta. SQL:SELECT operation, entid, changejob FROM logentries WHERE dn=? AND ownerid=? DN:
IdM is running on Windows 2008 R2 and its database on Oracle 10.2.
On Win2k3 and MSSQL it is running smoothly.
Any idea will be helpful.
Thanks
ChristosHi Christos,
have you checked the connection strings within the identity Center?
It's just a guess, but it seems that the password of the mxmc_oper-user is missing.
Kind regards,
achim -
FILE STREAM error while enabling it in SQL SERVER 2012
I'm trying to use Filetable in my Project. For which i need to enable FILESTREAMS ,
when i try to do that through Configuration Manager i'm getting following error:
"There is a unknown error in filestream settings 2012"
ChecK the Parameters are valid. (0X80041008)
Can anyone reply as to how i can fix this.
Thanks in AdvanceHi sthilaks,
Have you installed SQL Server 2012 Service Pack 1? If not, I suggest installing it and check the result again.
SQL Server 2012 SP1 Is Now Available!
http://blogs.msdn.com/b/sqlreleaseservices/archive/2012/11/07/sql-server-2012-sp1-is-now-available.aspx
Allen Li
TechNet Community Support -
Error while enabling Voice/Fax to user
accessed the following URL http://host:7780/um/admin/UMAdminLogin.uix
logged in as vipul.garg
Clicked on Administration tab
Clicked on User tab
Clicked on 'Add user' under Voice/Fax user management
Selected domain mindaxis.com
selected user [email protected]
Clicked on enable Voice/Fax
Following error generated:
No Group Profiles found in Directory under UMContainer. Please look into the UM
installation.
Any suggestion / solution?Had the same exact problem, if you find anything please tell me.
Thx -
Error while enabling dimension for OLAP API and BI Beans
Hi, I've created some dimensions in OLAP Catalog using CWM2 packages. These dimensions have only one hierarchy and one or two levels.
I also have an Analytic Workspace, and I've created these dimensions in this A.W. using CREATE_AWDIMENSION method from DBMS_AWM package.
Everything ok at this point.
Next, I've tried to enable these aw dimensions for the OLAP Api and BI Beans, using CREATE_AWDIMENSION_ACCESS_FULL/CREATE_AWDIMENSION_access methods from DBMS_AWM. Strangely, dimensions whith two levels are enabled ok, but dimensions with only one level can't be enabled. If I use CREATE_AWDIMENSION_ACCESS and I execute generated script, an error appears when trying VALIDATE_DIMENSION, with a text like this:
.ENTITY TYPE ENTITY NAME STATUS COMMENT
. Dimension AW1.DIM1 INVALID ERROR: Component entity.
- Default Display Hierarchy: "J0".
. Hierarchy J0 INVALID ERROR: Hierarchy Top Level not found.
My database ir 9.2.0.6. What is failing ? Some idea ? Thanks by your help.Not sure if it's valid to have a dimension with 1 hierarchy and 1 level in that hierarchy. The hierarchy may have to have at least 2 levels. If you want the configuration of a dimension with 1 hierarchy and 1 level, CWM2 may want you to omit the hierarchy, thus creating the dimension with only 1 level.
Maybe you are looking for
-
FV11 key combination issue - Materials - Services
Hi MM experts, I am having problem while making the PO - Services. We are separate POs for material & services. FV11 key combination maintained for Materials : Plant/Vendor/Material FV11 key combination maintained for services : Plant/Vendor/Materail
-
We're trying to get a silverlight app up and running in a Lync 2013 CWE. We have a Lync 2010 server on it's own domain, which is not the same domain as the 2013 client machine. Clients on the different domains communicate perfectly. The silverlight a
-
I have been gone through a lot of tutorial for "Setup JSP Environment" topic, and I was confused with some of the explaination.especially about setting up environment variable called JAVA_HOME and CATALINA_HOME. some of the Tutorial (Richardson Publi
-
Dear Experts, First, sorry if I am writing in the wrong section. Please let me know the right place to post such a question. I am a young accountant in an old distribution company which is currently catching up on the modern methods. We are implement
-
Is there any iPhone midi controller that can control logic just by one usb
is there any iPhone midi controller that can control logic just by one usb line to the mac? Free ones would be the best! Thanks!