Error while entering Basic Pay 0008

Hi Experts ,
In Transaction code PA40, while hiring an employee, In Basic Pay 0008 Info type, Following Wage types are to be entered
1001 -Basic Pay 4000 INR
2000 conveyance
2005 House Rent Allowance
2010 Transport Allowance
2015 City compensatory Allowance
W. Type 2000, 2005, 2010, 2015 are based on PRZNT of Basic Pay
i.e. Different % valuations for these wage types
In Table T539J , the % weightage has been entered for wage type 2001, 2005,2010 & 2015 & other wage types.
The value of the wagetypes based on PRZNT should be calculated based on Basic Pay 1001 wagetype.
But, the following error is displayed IndVal of wage type 2005: No entry in table T7INA9 for key 40E2M12005A on 20070820 Message no. RP032
In Table T7INA9 , the entries of Wage types 2000 to 2018 (PRZNT based) is not there. Do I need to enter the other wage types in Table T7INA9.
Allowance Grouping has been defined.
Pls advice ,
Thanks in anticipation
Pratik

Dear All,
Thanks a lot for the support, some changes were required in Table T539J
which i made and now i am getting desired entries.
The position of two wagetypes to be entered in the table was in wrong manner
ie; HRA 2001 PRZNT Basic 1001 10%
II had entered in a opposite way. now
AFTER CHANGING THE ERROR IS RECTIFIED
Also in RAP changes were made.
Thanks for the support given
Regards
Pratik

Similar Messages

Error While entering data in VA01

Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.

An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi

Error when creating basic pay (IT0008) in pa30

Dear Experts,
Greetings!
I am getting error when creating basic pay (IT0008) in pa30. Attached the print screen for the same.
Kindly help me out.
Thanks & Regards,
Vamshi Krishna M

Hi Vam,
It seems a critical error. Are you getting just for IT0008?
It's better to ask a BASIS man to check the issue or anABAPer to debug if you are not familiar with debug.
Regards,
Omid

Error while entering Applicant Data PB10

Dear Experts...
While entering the initial data of applicant when in save the data ann error occurs : "No application assigned to this applicant no. (Infotype Application)".
I have checked all integration components they are working fine. I also check the number ranges they are also assigned properly. Plz help.

Dear Delik...
I am selecting that.... Even then system gives me error....Even number ranges are properly choosen and activated. Basically this is not error message....its simple message but system doesnot allow us to save the data. Simple message means it is marked with Green tick... not red cross.

Error while entering payscale group in IT8

Error that data not there in T510 while entering payscale group in production system where as Payscale structure is maintained in T710 and working well in development and testing system for IT8

Hi,
You can try this link for a possible solution - http://sap.ittoolbox.com/groups/technical-functional/sap-hr/t510-vs-t710-1096277
I have the same problem as in our design we configured the grades and levels in T710. But Infotype 8 is searching for T510 and right now we still don't know how we can have it redirected without using TARIF feature.
It is working for a country that we did not implement and it did not use TARIF feature. What other ways could there be to use the pay grades and levels in T710 instead of having IT0008 look for values in T510? What configuration could be missing?
Sorry to respond with another question but I think we're on the same track. Hopefully the link I provided can answer your problem.
Regards,
Avel

Run Time Error while Entering Quantity in Sales Order

Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 Screenshot

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Connection error while performing basic settings SOLMAN 4.0 SP12

Hi All,
We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard. Within the "Initial Configuration Part I" section, an error while connecting to SAP is obtained (This is the full error message "Error creating communication to SAP Service and Support"). After checking at TX SM59, it was noticed that the RFC connections SAP-OSS y SAP-OSS-LIST-O01 (what are supposed to be created in previous steps by copying SAPOSS connection) were no created. We created them both manually (also tested) and everything was ok. We started the Wizard again, and the same error was obtained. However, it was noticed that the SAP-OSS RFC connection had been deleted. The system log shows the following:
00789 - Dialog work process No. 000 - XXXXXX - EQUIPO - 1 - SM_CONFIG_WZ - M_CONFIG_WZ_START - T - Transaction Problem - STSK
The same scenario occurs every time the above wizard is used.
It worth to mention that the SAPOSS connection works fine and also, just to perform a test, I was able to download a note correction through the SNOTE transaction.
Where should I check to see what is causing this connection error? Do I missing a previous configuration step?
Also, would be very helpful for us to get an step by step reference guide for SM configuration. We want to be sure we are no missing or mixed up anything.
Thanks so much for your help.
Regards

>
diego77 wrote:
> We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard.
Why do you start configuration for SP12, although most current version is SolMan 7.0 EhP1 SPS19?
What scenarios / functions are you planning to use?
Best regards,
Ruediger

Error while entering the time card

Hi,
while entering the time card,I am getting the error in APPS.PA_OTC_API api.
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20020: Pa_Otc_Api ::: ->Validate_Otc_Data->Validate_Process :: Check for quantity being negative. : ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-01403: no data found

Hi
Please clarify where are you entering the time card.
Is it on a form of Preapproved expenditures? Are you using OTL, or any other time application?
Are you are trying to load transactions thru the PA interface?
Dina

Error while assignment of Paying Co Code in FBZP

HI friends,
I am getting the following error while assigning Paying Co Code in FBZP -
Company code 7144 is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.bold**
The reason for the same isCompany code 7144 is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
The scenario is that one company code is making the payments for the other. However, the 2 companies are based in different countries. Hence, system is not allowing this assignment.
Has anyone come across this scenario? Is there any other wayaround for this which can result in Intercompany postings.
If we assign the Paying Company Code in the Variant screen in F110( instead of FBZP), will that work? I have tried the same but it doesnt work that way.
Any help on this will be highly appreciated.
Thanks in advance,
Hrishi

- i am not sure if its possible; help on FBZP clearly states this
+++++++++++++++++
The paying company code and the company code to which payment is made must be in the same country and have the same local currency and parallel currencies. In addition, both company codes must have the same settings for enhanced withholding tax functions (active or not active).
Only the valid company codes for the paying company code are included in the possible entries.
+++++++++++++++++
Rgds.

Error while entering transaction for a new customer in release 12.1.1

Hi,
I created a new customer in receivables (am using the version 12.1.1)
First i got an error while creating the customer saying, "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively"
I corrected the profile class amounts and now am allowed to create the customer but now the error comes while entering a transaction for this new customer:
"The system cannot determine geographical information for this location and cannot derive a tax jurisdiction. Please contact your system administrator"
please suggest a solution.
regards,
Shilpa

I faced the same problem, Doc ID 420194.1 solved the problem. Shilpa kindly post the solutions moving forward so the users can benefit from it. Thank you!
Solution
run Geography Reference Program with parameter "Country code" for all records.
Navigate to Trading Community Manager ->
Requests -> Run
Select "Geography Name Referencing" program
Processing for Table : HZ_LOCATIONS and Run Type : ALL
Parameters: Country Code :US
Usage Code :ALL
From Location Id :NULL: To Location Id:NULL
Start Date :NULL: End Date:NULL
Number of workers:1
Total number of Processed Locations:9
Number of Successfully Processed Locations:9
Number of Locations in Error:0

Error While entering GR/GI slip number in MIGO (Message no. NR751 )

Hi Experts,
While entering GR/GI slip number in MIGO,system throws an error
"For object XABBELEGNR , number range interval does not exist OMJ6"
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code: OMJ6
Configuration settings are already done in OMC1.
external number range already maintained for this plant and year 2010 in OMC1 OMJ6 .but still this error comes.
would appreciate the help.

Check these links:
Posting a "goods issue" msg NR751
Re: GR posting problem
Check in OMR4 - document types in IV - document type assigned to Tcode MR11 (say KP) and then check document type tab in same Tcode for number range series assigned to doc type KP - maintain series in FBN1. You can check in NRIV database table with object RF_BELEG for number range series maintained.

Tax code error while entering Expense Receipts in TRIP transaction

While entering Expense Receipts in the transaction TRIP (Travel Manager), I get an error saying..
"Entry TAXUSJ V0 does not exist in T007A (check entry)".
1) Please help me understand the cause for this error. As the Travel Expense system is connected to the FI (Finance) system, is any config in the FI table causing the error?
2) Please suggest how to resolve this error.
Thanks

Hi,
TAXUSJ--Sales Tax USA w. Jurisdictions and VO is a Tax code.
Please mainbtain above combinations in below tables and try
GOTO SM30
J_1BTAXCODEV
J_1BTXMMCV
V_T007A_DEF
Bhairavareddy
Edited by: Mudupu123 on Dec 14, 2010 8:04 AM

Error while entering number range

Dear All
While entering number ranges for Assets using t-code AS08 i am getting the following error:
Company code........ 2000 does not exist
Message no. NR011
The company code 2000 is assigned to Chart of depreciation also.
Please advice.
Thanks & Regards
Kanwaljit

Hi,
In AO11, for your company code 2000, you might have assigned a diff company code for number range as cross company code asset number range.
Change it to 2000 and then go to AS08 and enter 2000 and enter the required number range intervals to it.
Thanks,
Srinu

Error while entering Timesheet into SAP

Hi All,
While entering Timesheet data into SAP through interface, we are facing an error as follows....
"The attendance/absence type 00/INOR does not exist".
Can anyone explain me about this error?
How to resolve this error?
Thanks and Regards
Pavan

Pavan
Attendance type means
general atttendance
Over time attendance
etc
I belive you are trying to upload attendance infotype 2002 that infotype might have subtype which is not matching properly
Please check
Best Regards

Error while entering address details in company code master data.

Hi Experts,
I am getting error while i am entering address details in company code master data that is while i am creating new company code.
ERROR: message No. AM216
Incomplete Address : Enter Country.
Here eventhough i am entering country as "IN" then still i am getting error.
Thanx,

Yes that is right what is mentioned above, first you give the company code and name then give the currency then select address (Shift+F5) and in that if you select country as IN then it will automatically come to master data.
Edited by: venkata986 on Aug 31, 2010 12:31 PM

Error while entering Basic Pay 0008

Similar Messages

Maybe you are looking for