Error while entering the Overhead percentage 0.3693 in Costing Sheet

HI,
While defining costing sheet in the system,i need to give the overhead percentage as 0.3692 as per the client requirement.but the system is giving the below error.
Input should be in the form __,___,__~.___V
Message no. 00088
Diagnosis
Your entry does not match the specified input format.
System response
The entry in this field was rejected.
Procedure
The entry must comply with the edit format. The following edit format characters have a special meaning:
"_" (underscore)
There should be an input character at this point; this should be a number for numeric fields.
"." (decimal point) (applies to numeric fields)
The decimal point occurs here (setting in the user master record).
"," (thousands separator) (applies to numeric fields)
This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma.
"V" (applies to numeric fields)
The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space).
"~" (tilde) (applies to numeric fields)
As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position.
All other characters have their normal meanings and must be entered in the same position as in the edit format.
Thanks
Sunitha

hi Sunitha,
this error is related to Decimal Format pls check your setting in country
For 4.7C
SPRO > IMG > General Setting > Define countries in mySAPsystem
For ECC 6.0
SPRO > IMG > SAP Netweaver > General Setting > Define countries in mySAPsystem
select your countries and double click in that there is last field for Decimal Pt. format check that format and try to enter value according to that format because in error it showing 4 decimal and there you may have maintained in two decimal. also check decimal currecy setting. One more reason could be there instead of full stop you may have maintained comma in setting.
thx.
Ganu

Similar Messages

Error while entering the time card

Hi,
while entering the time card,I am getting the error in APPS.PA_OTC_API api.
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20020: Pa_Otc_Api ::: ->Validate_Otc_Data->Validate_Process :: Check for quantity being negative. : ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-01403: no data found

Hi
Please clarify where are you entering the time card.
Is it on a form of Preapproved expenditures? Are you using OTL, or any other time application?
Are you are trying to load transactions thru the PA interface?
Dina

Error While Entering the Data: Code and Name

Hi Experts,
I have defined the Two User Defined tables and SBO created Two User Defined Forms.
i am able added the Data in One of the Form with the same value in Code columns for multiple rows and different value in Name columns for multiple rows.
but when i am trying to do the same thing second form, i am getting the following Error.
"This entry already exists in the following tables '' (@ABC) (ODBC -2035) [Message 131-183]"
Thanks in Advance
Regards
Lokesh

Hi,
U cannot enter the same value again and again... they are unique fields..
Vasu Natari.

Error while entering the Final Process Date for an employee

Hi,
I am receiving the below mentioned Error Message when I try to enterthe Final Process date and save for an employee on the End Employment screen.
HR_51746_ASG_INV_ASG_ID (PROCEDURE=pay_us_tax_internal.maintain_tax_percentage)
Please let me know if anyone has an idea on the cause for this error message and how to fix this.
Thanks,
Jithendra
Edited by: user11688089 on Feb 6, 2013 3:11 AM

What is the termination date on this employee and what Final process date are you using? Are there any payrolls that ran after his/her Term date. Because even though this employee has been terminated a while ago, if there are any payrolls run after that (even if this employee is skipped), the system still includes this emp in that run and doesn't allow you to enter a Final process date prior to that pay date
Either try to use a final process date which is in the next pay period after the latest payroll run or try running deltax.sql (removes tax records) on that assignment and see if that works
-Karthik

Error while entering the Fiscal Year/Period Variable

I keep getting the following error message when I try to input or select the Variable on the report that has been executed on the Portal. Everything is fine when done through Bex.
 Please enter value in permitted format for variable Fiscal Year/Period (Selection Options, Optional).
Entry needs template ___/____
For characteristic , enter value in a permitted format
Would anybody have any clue as to why?? It does have the Fiscal year Variant.
Thanks

This is fxed in BI JAVA SPS 12 Patch 2. Not sure whether there is any OSS notes for earlier SPS.

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while running the Report

Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
Naitik

Naitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill

Error while running the financial report in the workspace.

Hi,
Im getting the below error while running the financial report in the workspace in HTML mode.
*"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
*"You are not authorized to use this functionality. Contact your administrator"*
Can someone let me know how to resolve this error.

You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
http://workspaceServer:19000/hr/status.jsp
http://frWebAppServer:8200/hr/status.jsp
Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers.

Getting javascript error while selecting the Recipients in OBIEE delivers.

Hi All,
I am working on OBIEE from quite a long time, but recently I came across a error while selecting the Recipients in Recipients list of OBIEE delivers.
Making it more comprehensive, when I try to create an ibot , after entering all necessary information when I select Recipients in Recipients list and click on ok. I get a JavaScript error "null" is null or an object. The surprising thing is when i select cancel it works as ok.
Any help will be highly appreciated
Thanks,
Jyoti
Message was edited by:
user616430

I think you dont have a field named /BIC/XXXXXX in the table from which you are trying to fetch the data. Chech the spelling of the field name and table name.

Error While entering data in VA01

Hi,
I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
Runtime Errors SAPSQL_INVALID_TABLENAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 27.04.2009 12:57:13
Short dump has not been completely stored (too big)
Short text
A table name, specified in an SQL command, is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An invalid table name "A996" was specified in an Open SQL command:
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
Missing RAISING Clause in Interface
Program SAPLV61Z
Include LV61ZU01
Row 260
Module type (FORM)
Module Name SEL_KONDTAB
Trigger Location of Exception
Program SAPLV61Z
Include LV61ZU01
Row 724
Module type (FORM)
Module Name SEL_KONDTAB
Source Code Extract
Line SourceCde
694 and kschl = se_kschl
695 and datbi >= se_date
696 and datab <= se_date
697 and (coding_tab).
698 endif.
699 endif.
700 else.
701 if t681-ksdat is initial.
702 if not <entrytab> is assigned.
703 select * from (t681-kotab) appending table <cond_tab>
704 where kappl = se_kappl
705 and kschl = se_kschl
706 and (coding_tab).
707 else.
708 select * from (t681-kotab) appending table <cond_tab>
709 for all entries in <entrytab>
710 where kappl = se_kappl
711 and kschl = se_kschl
712 and (coding_tab).
713 endif.
714 h_subrc = sy-subrc.
715 if select_split ne 0.
716 modify coding_tab from coding_alter index select_split.
717 select * from (t681-kotab) appending table <cond_tab>
718 where kappl = se_kappl
719 and kschl = se_kschl
720 and (coding_tab).
721 endif.
722 else.
723 if not <entrytab> is assigned.
>>>>> select * from (t681-kotab) appending table <cond_tab>
725 where kappl = se_kappl
726 and kschl = se_kschl
727 and datbi >= se_date
728 and datab <= se_date
729 and (coding_tab).
730 else.
731 select * from (t681-kotab) appending table <cond_tab>
732 for all entries in <entrytab>
733 where kappl = se_kappl
734 and kschl = se_kschl
735 and datbi >= se_date
736 and datab <= se_date
737 and (coding_tab).
738 endif.
739 h_subrc = sy-subrc.
740 if select_split ne 0.
741 modify coding_tab from coding_alter index select_split.
742 select * from (t681-kotab) appending table <cond_tab>
743 where kappl = se_kappl
Thank you in advance....
Regards,
Sriram.

An invalid table name "A996" was specified
in an Open SQL command
Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
thanks
G. Lakshmipathi

Error while creating the product group by MC84

Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.

Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar

Bank Analyzer - Error while creating the Position Structure

Hi,
We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
We facing an Error while creating the Position Structure,
Error Message: Status of structure S40CURRACC is "New"
Anyone has an idea how to fix this?
Thank you,
John Crawford

Hi,
1.Run Transaction - /BA1/F0_SGS_START
2.Entered the name of the structure and try to "activate".
3.It will get Active without any inconsistency.
Regards
Phani

Error while running the program of deferred Tax ( New)Program Name RFUMSV50

Hi
I am getting the error while running the program of deferred Tax ( New)
Following is the detailed error :
Enter rate / INR rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Thanks & Regards,
PM

Check the following notes:-
1) Note 46582 - 2.2->3.0: error SG105 for exchange rate M w. inv.
2) Note 165645 - SG105:Enter rate & / & rate type & for 00.00.0000..
3) Note 483542 - F110: SG105 in maintenance of proposal run with wthhldng tax
4) Note 975657 - SG 105: FI-Enjoy with foreign currency and calculate tax
thanks
G. Lakshmipathi

Error while executing the Job:Cannot assign NULL to host variable 1

Hello!
I have the following issue:
Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details)
Note 1362138 - Rule generation - null pointer exception virsa_cc_rtmap doesn't me. After uploading files of ZCC_DOWNLOAD_SAPOBJ and ZCC_DOWNLOAD_DESC I got the same problem during job running...
How can I find out where is the problem?

Hi
That looks like your fields are disabled but they could still be causing the problem edited ( nah - talking rubbish as you've put dummy " " in there) edited - the 'null' error caused many background jobs to fail but, once we had the evidence to show the space (somebody had pressed enter instead of delete/backspace to clear the entry) it stopped the problem - just a bit of learning on the job which we all go through for the GRC chaps in KL.
A " " would be valid but a (I know you can't see it but it's there wouldn't be )
edited.When you did an edit/replace did it say it had replaced anything please?edited
The word doc option does sound good!
Cheers
David
Edited by: David Berry on Nov 4, 2010 7:33 PM

PSC 2510 - Wireless setup - "Error while saving the settings to the device."

While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
PSC 2510
Windows Vista
Using latest sfotware from HP to install
Thanks
Dennis
This question was solved.
View Solution.

ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
Thanks

Error while entering the Overhead percentage 0.3693 in Costing Sheet

Similar Messages

Maybe you are looking for