Error while expoting system configuration

Hi All,
I am getting following exception while exporting command groups in system configuration. Please guide me to solve this problem.
The configuration object has been added to the export package. ImportExportConfigException: Unexpected error when trying to add a set of configuration objects to the export. System error is "InvalidEntryException: Cannot add an already existing configuration object "configurable_[Administrator]_config://local/system/transport/Administrator_6275850%32%on%32%DDL-EPD%47%cm%47%ui%47%uicommand%47%Company_AppAnnouncementNewGroupSubCollection" to folder "plugin_[Administrator]_config://local/system/transport".". Inner exception is: InvalidEntryException: Cannot add an already existing configuration object "configurable_[Administrator]_config://local/system/transport/Administrator_6275850%32%on%32%servername%47%cm%47%ui%47%uicommand%47%Company_AppAnnouncementNewGroupSubCollection" to folder "plugin_[Administrator]_config://local/system/transport".
Thanks,
Venkatesh R

Hi Venkatesh,
System error is "InvalidEntryException: Cannot add an already existing configuration object .
i think u r adding objects morethan 1 time in transport package. Check ur objects and upload to package.
Surekha.

Similar Messages

Error while updating the configuration files (MOB20003)

hi,
After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

Hi Somesh,
If i am not wrong, only a war file deployment is needed to make ipad work.
This happens with URL hitting directly on the Server.
If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
Regards,
Atul

Unable to Install Identity Server : Error 20: Identity System Configuration

HI I am trying to setup IDM system as per below order.
Oracle DB -> OID (two Instance OID1 & OID2 on separate RHEL5 box) -> OVD ( OVD1 & OVD2) -> OAM
I have successfully installed this setup upto OVD. But once I started Identity Server installation, installation is breaking with Error " Setup.product.install, com.oblix.installshield.ObExecWizardAction, err, There is an error. Please try again. Error 20: Identity System Configuration already exists on the specified LDAP directory server."
Earlier Few of my tea-mates Tried installing Identity server unsuccessfully thats why may be now I am not able to install it again.
Let me tell you at what point I got above error.
Identity server installation asks two time Directory server information. First time I selected option as "Data Anywhere" and after that I have given the details of OVD (IP/Ports/cn=orcladmin/password) and I got above error. I ignored that error and continue installation and second time I selected options as " Oracle Internet Directory" and gave OID details. again I got same kind of information.
So I have droped RCU and reinstalled OID ( not OVD) and tired Identity installation but no luck got same error at first stage (OVD/Data Anywhere). This time I did not continue installation.
Please help me to resolve this issue and I also want to know how can I remove Idenitity Server Information from OVD ( and OID too for future reference).
Thanks.
Edited by: 985360 on Feb 1, 2013 9:57 AM

Hi Parmar,
The error message "Identity System Configuration already exists on the specified LDAP" is complaining that the schema objects required by OAM already exsit on the specified ldap. The schema update needs only to be performed once (usually the first Identity Server installation, although it can be performed manually as a standalone operation) on each ldap instance, after which subsequent installation of Identity Servers do not need that step, which can be avoided by answering "No" when asked if it is the first Identity Server to be installed.
In order to check if these schema objects are in your ldap, look at the schema for a lot of oblix* object classes and ob* attributes - if they are there then the schema has been added. OAM only supports OVD as the User ldap store, not the configuration store. When you first install an Identity Server, it is necessary to give OID (in your environment) as the configuration store, and the installation will usie the OID_oblix_schema_add.ldif file to update the OID schema. When you specify the user store as OVD, OAM adds VDE_user_schema_add.ldif to the OVD schema.
I suspect that your schema objects may be fine, but if you want to clean them from your directory you can use the *delete.ldif files supplied (all the ldif files are in identity/oblix/data/common) for the ldap servers, and start again.
Regards,
Colin

Error while ipmorting dev configuration in NWDS

HI
 I am getting error as "No configurations on server or server error" while trying to import development configuratios in NWDS 2.0.7. I am using WAS 6.40 sp 9 . plz provide me some idea what to do.
 I thought may be its because my cms has not been configured for domain & track. I tried to confiogure domain and succeed. but while tring to add track I am getting error as"
Collection 'compartments' of configuration "dm_dev" is empty or missing (null). : compartments
 again while adding track in domain if I adds software components "SAPDEVINFF" from the list it's giving the following error "
DTR (URL http://<server-name>:50000/dtr) server exception: Repository "http://<server-name>:50000/dtr" failed to properly respond to request "PROPPATCH ws/dm/sap.com_SAPDEVINFF/dev/" [HTTP/1.1 500 Internal Server Error]
 actually I am tring to configue JDI on WAS but get stuck with these configurtion things since last 3/4 days.
thanks in advance
Ashutosh

Thanks Pascal,
First one I understood.
for the second one I tried from my friend's system who has NWDS 2.0.9, but it showed same as above problem. I guess this is because I have not defined track.
 I have followed the NWDI installation guide of version sp12 . I guess that should not be a problem. I could not find a guide for sp9.
 now I have to solve the problem of these errors that is shown while defining track.
 one thing i want to let you know that while I am tring to access the CBS url http://<server-name>:50000/webdynpro/dispatcher/sap.com/tc.CBS.WebUI/WebUI
 its giving error
An error has occurred:
"Failed to process the request."
Please contact your system administrator
even though I have configured CBS as per the installation guide.

FPM: Error while creating component Configuration

Hi,
I have installed ABAP trial version (NSP), but without loopback adapter. So, now for every WebDynpro application, I have my manually change link from "http://<mymachineName>:8000" to "http://localhost:8000".
I create an application on FPM component: FPM_OIF_COMPONENT, then an application configuration for this application.
I open this Appl. config. in se80 and press "Start configuration". Now I try to create new component configuration.
After maintaining description and transport information, I save it.
At this point, I get a dump:
"RFC Error while sending logon data"
CALL_FUNCTION_CONNECT_ERROR in CL_WDR_CFG_COMP_SHBROKER======CP.
The class: CL_WDR_CFG_COMP_SHBROKER method: INVALIDATE
has a call: call function 'WDR_INVALIDATE_CFG_PATTERN' starting new task l_cfg_task
exporting client = client pattern = l_instance_name .
where it dumps.
could you please to resolve what could be wrong? is there some system setting which I missed.
Regards,
Daman

Hi ,
This exception is raised when a connection or communications failure occurs.
This exception reports all failures and system problems on the remote machine . so look like there is some porblem with your system connection .
Could you please check in your host file , is that entry for system is maintain or not ?
Hope this help .
Regards,
Dinesh

Error while opening UWL configuration file

Hello SDN,
I am customizing UWL config file. I have download file and saved it to desktop. But while opening that file i am getting following error.
The system cannot locate the resource specified. Error processing resource 'uwl_configuration.dtd'. Can you please tell me how to download and customize file.
regards,
Sree.

Hi Sushil,
I have followed the same procedure what you have explained. But when i am opening XML file with XML editor , it is not opening and not giving any error. But when open with word it is saying "file must contain one root element".
When open with notepad below is the content.
<?xml version="1.0" encoding="UTF-8"?>

<!ELEMENT UWLConfiguration (Principals?, DescriptionBundles?, Actions?, ItemTypes?, Views?, GlobalDisplayAttributes?, NavigationNode?)>
<!ATTLIST UWLConfiguration
 version CDATA "1.0"
>




<!ELEMENT Principals (Principal+)>
<!ELEMENT Principal EMPTY>
<!ATTLIST Principal uniqueID CDATA #REQUIRED>

<!ELEMENT ItemTypes (ItemType*)>
<!ELEMENT Views (View*)>

<!ELEMENT ItemType (Caching?, ItemTypeCriteria?, CustomAttributes?, Actions?, Menu?)>
<!ATTLIST ItemType
 name NMTOKEN #REQUIRED
 connector CDATA #REQUIRED
 defaultView NMTOKEN #REQUIRED
 defaultAction NMTOKEN #IMPLIED
 executionMode (optimistic|pessimistic|default) "default"
> following file like this........
when i copy the content directly from portal below is the format....
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
<ItemTypes>
 <ItemType name="uwl.task.webflow.TS01000096.ESS_Webdynpro" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">
 <ItemTypeCriteria systemId="ESS_Webdynpro" externalType="TS01000096" connector="WebFlowConnector"/>
 <Actions>
 <Action name="launchSAPAction" groupAction="" handler="SAPIACLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
 <Properties>
 <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
 <Property name="openInNewWindow" value="yes"/>
 <Property name="display_order_priority" value="5"/>
 <Property name="IAC" value="WS01000060"/>
 </Properties>
 <Descriptions default=""/>
 </Action>
 </Actions>
 </ItemType>
 <ItemType name="uwl.task.webflow.TS01000097.ESS_Webdynpro" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">
 <ItemTypeCriteria systemId="ESS_Webdynpro" externalType="TS01000097" connector="WebFlowConnector"/>
 <Actions>
Can you please check and let me know if anything is missing.
regards,
Sree.

Error while create/change configuration an application

Hi,
while doing the configuration application.
when i am trying to create/change configuration an application.
i am getting following error.
Error:
Service cannot be reached
What has happened?
URL http://os1gvzg.gemsconsult.com:8000/sap/bc/webdynpro/sap/configure_application call was terminated because the corresponding service is not available.
Note
The termination occurred in system RT1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:os1gvzg_RT1_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
can anybody help me out.
thanks in advance,
Kiran.

Hi,
please check [documentation|http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm]
grtz,
Koen

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

Error while running OBIA configuration configApps.bat

I am receiving error while running configapps.bat.
I have the following wnvironment installed:
64 Bit windows
Java 6 (JDK1.6.x)
Weblogic server 10.3.6 in software only mode
Ran OBIEE 11.1.1.7.0 RCU utility to create BIPLATFORM and MDS schemas.
configured OBIEE 11.1.1.7
Installed ODI 11.1.1.7 with All components and “Skip Repository Configuration”
Ran OBI Apps RCU to create schemas for:
ODI Master and Work Repositories (DEV_BIA_ODIREPO)
Oracle Business Applications Components (DEV_BIACOMP)
Oracle Business Analytics Datwarehouse (DEV_DW)
Update to MDS schema.
Installed BI Apps 11.1.1.7.1
Applied FMW Platform Patches
Updated BIACOMP Schema with ATGLite patch scripts
Everything was up and running until now, when i try to configure OBIA via running configApps.bat, it is getting stuck at ODI configuration.
Also the server seems to be going to idle/suspended state every now and after 5-6 mins of startup and i see this message repeated again and again in server log :
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Has anyone encountered this issue and any idea how to resolve this.
Appreciate any help in advance ...

The re-install has been successful. Didnt encounter any issues in any configuration.
However the waring still appears
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Also in the log i am getting the following errors as well in the Weblogic server log
BEA -101020 Servelet failed with exception Java.lang.illegalstateexception: Cannot forward a response that is already committed
Oracle.as.management.mbeans.opmn OPMN.queryProcessStatus failed with the following exception oracle.as.management.opmn.optic.OpticBadConnectionException: Failed to create secure socket for OPMN
All patches were applied successfully, including weblogic one's.
Has anyone got any idea how to resolve these issues.
Thanks in advance.

Error while saving the configuration

H,
I'm getting the following error while try to save the configuration in L3 switch.
Rou#wr
Building configuration...
% Warning: Saving this config to nvram may corrupt any network management or sec
urity files stored at the end of nvram.
Continue? [no]:
what could be the problem?

hi
The corrective measure here is to compress the config file in NVRAM..
you can do the same using service compress-config in the global config prompt.
once you are done with the command in the global mode do remember to save the config..
regds

Error while doing BAM configuration in JDeveloper

Hi,
I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
"Server is not set up correctly SOA1"
I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
Host Name: SOA1(system name)
Port Number: 80
User Name: Administrator
Password: <windows domain pwd>
Domain Name: DOMAINNAME
Any help would be highly appreciated.
Regards,
Shaily

hi Shaily
It looks like suggesting a different forum is not needed, because you already tried that ...
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
I hope you get some answers.
success
Jan Vervecken

Error while Importing SYSTEM objects into 9.2.0.6

HI,
I got the following error while importing data into 9.2.0.6 DB .
It is related to a SYSTEM object.
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 2270:
"ALTER TABLE "DEF$_CALLDEST" ADD CONSTRAINT "DEF$_CALL_DESTINATION" FOREIGN "
"KEY ("DBLINK") REFERENCES "DEF$_DESTINATION" ("DBLINK") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 2270 encountered
ORA-02270: no matching unique or primary key for this column-list
Constarint exists on Composite Primary Key on the parent table.
Can anybody help me out on this.
Regards,
Sumit Singh Chadha

Hi,
don't mentioning why are You importing SYSTEM objects, the error that You have, just looking the message, is due to an export done without the clause CONSISTENT=Y (so all relations parent/child preserved) having the replication (the table in error is one of the replication dictionary table) active (not quisced)
Repeat the export operation using CONSISTENT=Y an stop replication activity.
Hope this helps
Max

Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

Error in Managed System Configuration - Sol Man 7.1

Dear Experts,
Whle configuring using solman_setup, I am getting below mentioned error in Managed System Configuaration:
Cannot retrieve CIM Instances from CIM Class 'SAP_DiagnosticsRelevantSoftwareFeature'!
Cannot retrieve all CIM Instances from CIM class name 'SAP_TechnicalScenario' via LMDB Mass Access API!
Cannot retrieve all CIM Instances from CIM class name 'SAP_DatabaseSystem' via LMDB Mass Access API!
Any suggestions??
Regards
Vivek

Hi Paul ,
Thanks for the note that you provided.
I am reconfiguring the LMDB and conteny Sync... The refresh will take 15-16 hours.. I am just waiting for the
sync to be finished. Let's see what is in the store for me
Keeping my fingers crossed untill then.
Regards
Vivek

Configuration Check Error in Managed System Configuration

Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany Pan

Hi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi

Error while expoting system configuration

Similar Messages

Maybe you are looking for