Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

Similar Messages

  • Syntax error in program CL_AC_METRIC_REPOSITORY=======CP When going to managed system configuration in solman 7.1

    Dear SAP Gurus,
    Good Morning.
    I'm getting error in managed system configuration in solman 7.1. Error is like
    The system preparation and Basic configuration in working fine, but when we are going to click the managed system configuration Error getting like this.
    Solution Manager  Version : 7.1
    SP Level  : SP5
    Thanks in Advance.
    Regrads,
    Kumar BN

    Hello Kumar,
    I would suggest moving this discussion to this space in SCN: http://scn.sap.com/community/it-management/alm/solution-manager
    That will help get you a quicker response.
    Thank you,
    Kristen

  • Managed System configuration in Solman 7.1 sp11??

    Hi All,
    I have done new installation of solman 7.1 and upgraded to sp11.
    I did system preparation and basis configuration in solman_setup.
    I have one query how to add ERP production system to SLD and how to do managed system configuration for that.
    I want to add ERP Production system and Managed configuration for that and MOPZ,EWA configuration ERP Production system.
    Please help me in this...
    Here i attached screen shot for your reference.
    Presently in managed system Only Solman system is visible.
    Thank in Advance
    Chandra

    Hi,
    Please chekc th ebelow guide
    Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
    https://websmp104.sap-ag.de/~iron/fm/011000358700000209862011E/012002523100005267752014WRK2?TMP=1407918324257#bkm_show1_…
    go to Configuration of SAP Solution Manager
    Normally y this demo and guide will be available  http://service.sap.com/rkt-solman
    #sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification  work in SOLMAN7.1
    Normally after addition in SLD ,system will adding the system in LMDB ,then added in smsy automatically. check the Job LMDB*
    Update the CR content in SLD , check th below note fpor the smae.
    Note 669669 - Updating the SAP Component Repository in the SLD
    LMDB FQA:
    Landscape Management Database (LMDB) – FAQ
    Product system Editor in LMDB:
    New in SP05: Product System Editor in the Landscape Management Database of SAP Solution Manager 7.1
    Maintenance of Product in the System Landscape - SAP Solution Manager Setup - SCN Wiki
    Rg,
    Karthik

  • SolMan 7.1 SP10: Managed Systems Configuration: client 000 OK, client 100 error

    Hello,
    after installing SolMan 7.1 SP10 successfully I also completed the steps "System Preparation" and "Basic Configuration".
    Now I'm connecting the managed ABAP systems to the Solution Manager by performing step "Managed Systems Configuration".
    After several other ABAP systems I'm now connecting our productive CRM 7.0 EHP1 system "CM3" (SAP_BASIS 702).
    I also connected the CRM development and CRM quality assurance system without a problem.
    For client 000 everything worked fine, the RFC destinations were created and a green light is shown.
    Now the problem is to connect the productive client 100:
    The log for Activity RFC Connection says:
    The corresponding dev_rfc tracefile says:
    **** Trace file opened at 20140326 164911 W. Europe Standard Time, by disp+work
    **** Versions SAP-REL 720,0,523 RFC-VER U 3 1468763 MT-SL
    ======> Name oder Kennwort ist nicht korrekt (Wiederholen Sie die Anmeldung)
    ABAP Programm: SAPLSM_SETUP_API (Transaction: )
    Called function module: FUNCTION_EXISTS
    User: SOLMAN_ADMIN (Client: 001)
    Destination: 0050568713C71ED3AD9FC4F78AC9D9EB (Handle: 16, DtConId: 27FEB4E356BCF14F99EB0050568713C7, DtConCnt: 1, ConvId: 64734943,{27FEB4E3-56BC-F14F-99EB-0050568713C7})
    EPP RootContextId: 0050568713C71ED3AD9FB7AD4C4859EB, ConnectionId: 0050568713C71ED3AD9FB784232C59EB, ConnectionCnt: 1
    EPP TransactionId: BDFDB4E3626AF14899EB0050568713C7
    But both users taken to execute this step (SAP Solution Manager Administrator "SOLMAN_ADMIN" and Managed System Configuration User "SM_ADMIN_SM3") exist and have the correct provided password.
    Does anyone have a clue?
    Kind regards
    Rüdiger Höckel

    Hello Ranjith,
    thanks for your quick response.
    The ST-A/PI software component is the same on all systems: 01Q_700 #2.
    SolMan system: SM3
    CRM systems: CM0 (ok), CM1 (ok), CM3 (problem with client 100, client 000 OK).
    I also tried the recommendation found in the SAP Community Network
    (http://scn.sap.com/thread/3483642) but this didn't help either:
    1.Delete system from LMDB.
    2.Delete system from SLD of solman.
    3.Re- register the system to SLD of solman(rz70 for AS ABAP)
    [the LMDB synchronizes with the SLD every 10 minutes, system CM3 is visible again in the LMDB]
    4.Now follow the steps in managed system configuration.
    The wizard worked fine for client 000 but throws this error for client 100.
    I use all the latest installation and configuration guides.
    For this step I'm using the guide "Managed System Configuration" that is available in the SOLMAN_SETUP wiki.
    https://websmp206.sap-ag.de/~sapidb/011000358700001120342013E.pdf
    Kind regards
    Rüdiger
    P.S. In total I have already connected eight systems (SAP_BASIS 700 to 731) but this is the first system that gives an error.

  • Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

    Hi All,
    I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
    "An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
    I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
    Please suggest.
    Regards,
    Manish

    Manish,
    Which UME you are using? portal/ABAP/LDAP
    Are you using the SOLMAN_ADMIN user while configuring.
    Also check the below forum.
    https://scn.sap.com/thread/1167282
    Regards,
    Raja. G

  • Managed System Configuraiton Issue in SolMan 7.1

    Hi Experts,
    In solution manager 7.1, during Managed system configuration in phase "Configure Automatically" am getting an error while executing the step 'Activate Services' .
    Error log says-->Function module W3_PUBLISH_SERVICE does not exist.
    I checked function module W3_PUBLISH_SERVICE  which exists in SolMan 7.1 but its not available in managed system.
    Please help to overcome on this issue.
    Thanks,
    Rakesh

    Hi,
    To use the functionality of report  W3_PUBLISH_SERVICE on managed system
    you need to import SAP BASIS 701 SP02.
    Actually, function module W3_PUBLISH_SERVICE is delivered since
    support packages below:
    SAP_BASIS 701 SAPKB70102
    SAP_BASIS 710 SAPKB71007
    SAP_BASIS 711 SAPKB71101
    So, to import this object is necessary upgrade the system at least to
    SAP_BASIS 701 SP 02.
    Unfortunately it is not possible to import only this specific object
    regarding all dependecies that it necessary to import to the system
    to make it consistent.
    Also check notes:
    1233316 and 1309047
    So you have following options as per note: 1309047:
    1.  Import SAP_BASIS >= 701 Support Package 1 into the managed systems.
    2.  If SAP_BASIS is not of a higher release than 700, the service must
        be manually activated and this results in a warning in the log.
        Manually activate the service /default_host/sap/bc/bsp/sap/system in
        transaction SICF in the managed system. The error message mentioned
        above is still displayed, since, due to the missing function module,
        the service activity cannot be checked on the managed system.
    So if you manually activate this service, the error will also exists
    because the automatical mode cannot get a sucessful result and you
    manually perform this step instead, and you can ignore this and go on
    the configuration.
    Thanks
    Vikram

  • SOLMAN 7.1 Managed system(Maintain RFC's Step)

    Hi All,
    I am performing Managed System Configuration for PI system.
    In the Maintain RFC's step I am facing below error.
    SOLMAN (7.1 sp12). Kindly help me by suggesting how to resolve this issue.
    I am attaching screen shots. If these can help
    Thanks and Regards,
    Solman Starter

    Hi All,
    I am performing Managed System Configuration for PI system.
    In the Maintain RFC's step I am facing below error.
    SOLMAN (7.1 sp12). Kindly help me by suggesting how to resolve this issue.
    I am attaching screen shots. If these can help
    Error during connection to system PID / 100: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=236 SAP gateway connection failed. Is ).
    Thanks and Regards,
    Solman Starter

  • Requirements for lead management system in sap sd

    hii
    can we maintain lead management system in sap sd module..what are the requirements for lead management system.

    no

  • Managed System Config: Wily BC path /usr/sap/ SID /JC instance is not a directory for BI Java Instance

    We are getting error message "Wily BC patch /usr/sap/<SID>/JC06 is not a directory while doing managed systems setup. System verification is successful. The Java directory should be /usr/sap/<SID>/J06 in our case, which is showing correctly in LMDB. Any idea?
    I have done the usual resynch SLD, Rerun system verification and reset managed systems configuration etc.

    Hi Tariq,
    Please enter complete path like below and check  :
    /usr/sap/<ManagedSID>/<InstanceID>/ByteCodeAdapter
    Also check below SAP note for details :
    1943583 - Wily Agent Directory files are Missing after Network loss - Solution manager 7.1
    Hope this helps.
    Thanks & Regards,
    Nisha

  • Managed System Setup: SAP Router

    Hello!
    We are trying to execute managed system configuration for some sattelite system that we access over SAP Router.
    Which ports (inbound/outound) do we need to open in order to install Diagnostic Agent and connect it to Solution Manager?
    Thank you!

    Hello Alex,
    Please check this conversation External diagnostic agent   and note 1886060 - System Monitoring Setup for SAP Router.
    BR,

  • SAP SOLMAN 7.1 error in ATM for DBACOCKPIT

    Hi Experts,
    My client's SAP Solution Manager 7.1 has been displaying the error message - "Error in RDI back-end setup occured!", since last one week. I am unable to analyze this to resolution, as there is nothing I couldn't find closely relative in the standard database SAP Sybase 15.7. ASE server configuration guides or in the SCN itself for that matter, which would help me resolve this bugging error.
    I have also checked in system logs but have always found different types/varieties of database errors everyday. I am attaching the error screenshots for your kind reference and consideration. Kindly note that I have worked on most databases previously in an efficient manner except for Sybase ASE, which is relatively new to me.
    When I click on repair, I am getting the following error, which my SAP Basis PM/lead has told me its a generic error.
    Upon clicking on yes, I am getting the unavoidable error shown below -
    The error is - "Error in RDI back-end setup occured!", as i have stated above.
    I have checked the ATM logs and history and they are fine. I am getting error only in the ATM queue as shown below -
    I am also getting the same database errors in event viewer as to those in the system logs for SAP SOLMAN 7.1 server.
    I would appreciate it very much if one of the Sybase experts would help me out here. Speaking of technical configuration for any database in conceptual terms, I perceive this error to be a space issue as mentioned in the ATM queue. I believe I have provided sufficient details. The OS here is the Windows server 2008 R2 version.
    Kindly mention if you need more details for a speedy and possible error analysis and resolution
    This is an emergency task for me as I need to resolve it on ASAP basis. Rest assured, points for all right answers will be awarded generously.
    Thanks and regards,
    M. Nizam

    Hi Nizam,
    Please share what is the database patch level for Sybase ASE 15.7
    Additionall please review below SAP notes
    1619967
    SYB: DBA Cockpit Correction Collection SAP Basis 7.31
    1558958
    SYB: DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
    1920025 DBACOCKPIT - Error 'Repair ATM' when started from different systems
    Hope this helps.
    Regards,
    Deepak Kori

  • Link SAP with Excel

    Hello SAP Gurus-
    Every month we have to download various reports from SAP (ME2J, FS10N, FD10N, FK10N and others) and export it to excel. Than in excel, we have to mannually format the same.
    Is there a way we can link SAP with excel? Like if anyone in my company posts against particular vendor, it will automatically update the excel file that will have report from FK10N (Vendor Balance Display)
    One of my friend at Bloomberg said that their SAP is linked to excel where excel is updated automatic. But I could not get any further details on how it works.
    Please let me know if there is a way we can implement this system in our company.
    Thank You in advance.
    Jai

    Hi,
    You have to direct download it in to the Excel sheet without export to excel file.
    E.g:- If you need to download the balance or any data fron the spreatsdeet amd yu download the file and give the file name as .xls it will download in the excel format.
    May hope this is helpgul
    Regards,
    Kanike

  • Upload Massive Employee Photo into SAP - Archive link - SAP ECC 6.0

    Dear all,
    I try to insert the employees photo in Archive Link (release 46).
    I write a massive report to do a batch input, but I cannot insert the path and the name of the picture.
    Because the BTC don't memory the "call method cl_gui_frontend_services=>file_open_dialog"
    I wrote the folowing report
    *& Report  ZHR_BDC_UPLOADPIC
    REPORT zhr_bdc_uploadpic
         NO STANDARD PAGE HEADING LINE-SIZE 255.
    * include
    INCLUDE bdcrecx1.
    * i n t e r n a l t a b l e s
    DATA : BEGIN OF it_data OCCURS 0,
         rp50g-pernr(8), " LIKE RP50G-PERNR,
         rlgrap-filename(128),
      END OF it_data.
    * s t a r t - o f - s e l e c t i o n
    START-OF-SELECTION.
      PERFORM open_group.
      CALL FUNCTION 'UPLOAD'
        EXPORTING
          filename                = 'C:\PICTURE.TXT'
          filetype                = 'DAT'
        TABLES
          data_tab                = it_data
        EXCEPTIONS
          conversion_error        = 1
          invalid_table_width     = 2
          invalid_type            = 3
          no_batch                = 4
          unknown_error           = 5
          gui_refuse_filetransfer = 6
          OTHERS                  = 7.
      IF sy-subrc NE 0.
        WRITE : / 'Unable to upload data'.
        STOP.
      ENDIF.
      LOOP AT it_data.
        PERFORM bdc_dynpro      USING 'OANEWCON' '0100'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=NEW'.
        PERFORM bdc_field       USING 'TOAOM-SAP_OBJECT'
                                      'PREL'.
        PERFORM bdc_field       USING 'TOAOM-AR_OBJECT'
                                      'HRICOLFOTO'.
        PERFORM bdc_dynpro      USING 'SAPLOA12' '0200'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=OK'.
        PERFORM bdc_field       USING 'OBJID-VALUE(01)'
                                      it_data-rp50g-pernr.
        PERFORM bdc_field       USING 'OBJID-VALUE(02)'
                                      '0002'.
    *---- not exist - begin
    *    PERFORM bdc_dynpro      USING 'SAPLOPTM' '0105'.
    *    PERFORM bdc_field       USING 'BDC_CURSOR'
    *                                  'SAPB-SAPPOOLINF'.
    *    PERFORM bdc_field       USING 'BDC_OKCODE'
    *                                  '=OKAY'.
    *    PERFORM bdc_field       USING 'SAPB-SAPPOOLINF'
    *                                  it_data-rlgrap-filename.      "JPG'.
    *---- not exist - end
        PERFORM bdc_dynpro      USING 'OANEWCON' '0100'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/EBACK'.
        PERFORM bdc_transaction USING 'OAOH'.
        CLEAR it_data-rlgrap-filename.
      ENDLOOP.
      PERFORM close_group.
    Could you help me to understand a different method to upload the pictures?
    Thank you in advance.
    Best regards
    Luca Moschioni

    Hi,
    for uploading the photograph you need to do some customization.
    1. Initial customization
    Execute transaction code OAQ1 and put X in all the boxes.
    Execute t code OAB4 and schedule the job
    Execute t code SPAD and configure an output device
    Execute T code OANR and configure the number range
    Execute T code OAGI and deactivate Print list management system
    EXecute T code SA38 and execute program RAPARAM and check for rspo/archive_format and make sure it should have 2 assigned on it.
    2. Execute t code OAC0 and configure content repository
        Execute t code OAC2 and make your document type
        Assign JPG doc class to your doc type made in OAC2 in t code OAC3.
    3. Now go to transaction code OAD5 and configure your settings
       Come to t code OAWD and upload all your scanned photo to SAP
    I know the procedure is tedious and lenghthy but there is no way out.
    If it helps you then reward it.
    Enjoy
    For further help contact at [email protected]

  • {LINK SAP.OLELinkServer.ItemObject.#}

    Hi,
    I have a problem in automatic update fields in a excel file using the LINK SAP.OLELinkServer.ItemObject.#}...
    It always appears a # in stead off the right value, just when i force in manual mode it runs ok.
    Thank you very much,
    Joã

    Hi,
    Can you contact to abaper for this.
    Anil

  • Authobject for SAP collaboration assignment block in Solman 7.1

    Hi Guru,
    I am trying to find the authorisation object for edit option in SAP collaboration assignment block in Solman 7.1.
    The edit button is disabled.
    I could not find it through trace as it was greyed out.
    Could you please suggest which authorisation object is used for this.
    Regards,
    Pooja

    Hi,
    Please see if this can help you ...
    The Request for Change in Solution Manager 7.1 has a new screen area to define the scope. This new area is the scope assignment block.
    The Request for Change in Solution Manager 7.1 offers inside the Scope assignment block the possibility for several follow up documents also of different types. The field subject is obsolete in Solman 7.1 it was replaced by the change category of the scope assignment block.
    To define which change categories are valid you can perform the following customizing.
    SAP Solution Manager Implementation Guide - SAP Solution Manager - Capabilities (Optional) - Change Management - Standard Configuration - Change Request Management Framework - Make Settings for Change Transaction Types
    Choose SMCR Request for Change or your corresponding customer specific request for change and then double click on u201CCopy Control Rulesu201D in the left navigation area.
    Here you can define which follow up documents (also your own Z & Y Types) you want to allow in the scope as change category as well as define which information of the request for change shall be automatically copied. e.g. priority, text, date, attachments, context.
    Let me know if you need any further clarifications...
    Thanks,
    Ravi

Maybe you are looking for