Error while Extraction of HR Data to LDAP with report RPLDAP_EXTRACT_IDM

Hello Experts,
After executing report RPLDAP_EXTRACT_IDM to extract data from HCM system to IDM 7.1 i am getting following runtime error:
SAPSQL_ARRAY_INSERT_DUPREC,
Statement not getting executed is:
INSERT tlda_log FROM TABLE ilda_log
I have deleted all entries from tlda_log table but no luck:(
Any help will be really appreciated.
Regards,
Dev

I guess the query is not correct to insert data from one table to another Or trying to insert duplicate records.
First drop the table then try to insert using the below query.
Select * into tlda_log FROM TABLE ilda_log.

Similar Messages

  • Error while extracting the data in R/3 production system,

    Hi Team,
    We got the following error while extracting the data in R/3 production system,
    Error 7 When Sending an IDoc R3 3
    No Storage space available for extending the inter 44 R3 299
    No storage space available for extending the inter R3 299
    Error in Source System RSM 340
    Please guide us to fix the issue

    It´s very difficult to help you without knowing
    - what is going to be transferred
    - where you get this error
    - system configuration
    - actual memory usage
    - operating system
    - database and configuration etc. etc.etc. etc.
    I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
    Markus

  • Error while extracting huge volumes of data from BW

    Hi,
    we see this error while extracting huge volumes of data (apprx 3.4 million and with more no.of columns) and we see this error.
    R3C-151001: |Dataflow DF_SAPSI_SAPSI3131_SAPBW_To_Teradata
    Error calling R/3 to get table data: <RFC Error:
    Key: TSV_TNEW_PAGE_ALLOC_FAILED
    Status: EXCEPTION SYSTEM_FAILURE RAISED
    No more storage space available for extending an internal table.
    >.
    We are not sure if DoP works with source as SAP BW, but when tried with DoP also, we got the same error.
    Will this issue be resolved with an R/3 or ABAP dataflow? Can anyone suggest some possible solutions for this scenario?
    Sri

    The problem is that you've reached the maximum memory configure for your system.
    If this is batch job reconfigure the profile parameter
    abap/heap_area_nondia
    Markus

  • Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

    Hi Gurs,
    I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
    The error is:
    Update mode "Full Upload" is not supported by the extraction API
    Message no. R3011
    Diagnosis
    The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
    Your help in this regd. would be highly appreciated.
    Thanks,
    David.

    Hi David,
    I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
    Try to switch you DTPs/Infopackages to Delta mode.
    While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
    BR
    m./

  • Error While extracting data from FIAA and FIAP

    Hi Gurus,
    I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
    Ther Error is as follows:
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Kindly help. Your points are assured.
    Thanks and Regards
    Prasad

    Hello Prasad,
    Have you already checked what happened in the source system ?
    You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
    It could be a clue of what happened in R/3.
    Let us know,
    Regards,
    Mickael

  • Time Stamp Error while extracting data from R/3

    Hi,
        We are getting time stamp error while extracting data from R/3.
    To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
    Please suggest me to solve.
    Thanks
    Subba Rao

    Hi,
    Time stamp error arises when the time stamp of the data source in source  system and target system are different.
    For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
    You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
    Here are some useful links.
    [R3 016 Time stamp error where is it in BI?;
    [time stamp error in bi7;
    [Timestamp error in BI7;
    Thanks,
    Venu

  • Error while extracting from BI source

    Hi,
    We are facing a wierd problem:
    Scenario:
    Loading data from one DSO to another DSO with the help of transformation
    The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
    Error:
    Data package processing terminated
    Error while extracting from source EPUD0002 (type InfoProvider)
    System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Unknown error in SQL interface
    Error reading the data of InfoProvider EPUD0002
    Exception CX_RS_STEP_FAILED logged
    Workaround:
    We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
    FYI...Our transformation has lots of abap coding ...
    Addn Info:
    SAP_BW   700   0010
    BI_CONT   703   0005
    SAP_BASIS  700  0010
    Any help will be highly appreciated...
    - Amit

    There must be some bug in the code which is causing this issue.
    try to debug it,
    refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
    /people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

  • Error while extracting from source type InfoProvider)

    Dear Sdns,
                       Am trying to load the data from the exisitng standard cube to one new ZCUBE.. The time when am loading the data. am getting the following errors...
    <b>- Data package processing terminated     
    - Error while extracting from source 0FIGL_C10 (type InfoProvider)
    - ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP
    - SQL Error: 1652
    - Exception CX_RS_STEP_FAILED logged</b>
    Can any one help me out from this issue...
    Answering getz appreciated,
    Warm Regards,
    Hemanth Aluri

    Hi,
    It seems like Table space problem..check with your basis team.
    regards,
    raju

  • Error while extracting from DSO

    Hellow ! ! !
    Got a error message.
    Scenario:
    Tried Loading data from one DSO to another DSO through transformation.
    But, got a following error message.
    Error:
    Error while extracting from source 0FIGL_O02 (type DataStore)
    Message no. RSBK242
    Inconsistent input parameter (parameter: <unknown>, value <unknown>)
    Message no. RS_EXCEPTION101
    System:
    SAP_BW:700
    Support Package: SAPKW70016
    Regards,
    DongSun Choi

    Got same results though tried several times.
    Updated well  from DSO after Changing from transformation to  update rule.
    Think the transformation is some problem.
    Thanks a lot...
    dongsun, choi

  • Error while extracting 0FI_GL_30 - Message RJ012

    Hi All,
    I am extracting Data Source in RSA3.
    I am getting the following Error Message.
    Error while Extracting Message RJ012
    Can Anyone will help in this issue?
    Thanks,
    Mayur

    Please check if SAP Note 1006441 is useful to your issue.
    Hope this helps!
    - Sheen

  • Error while extracting

    Hi,
    I keep getting the same error while extracting from various BC data sources. The error is about some Time Stamp. It says the time stamp in source is not the same as that in BW.
    I have replicated and activated again and again but keep getting that error.
    What are the reasons and how can it be fixed?
    Thanks
    Fran

    A.H.P
    if its due to plug in upgrade, will that program solve the problem? Or do we have to ensure the upgrade on the Basis side?
    thanks
    Fran

  • ERROR:- ENT-09671 ERROR WHILE EXTRACTION DIMENSION METADATA FOR DIMENSION

    Hello all,
    i am working on OWB 10gR2 while i try to validate & Deploy according to the following process it was successful but as i tried to view data from dimension i am getting an error which i have mentioned below
    Source Table = CUST_MST
    Destination Table = CUSTOMER
    Dimension = CUSTOMER
    Mapping = CUSTOMER_MAP
    Validate Table CUST_MAP.
    Validate Table CUSTOMER.
    Validate Dimension CUSTOMER.
    Validate Mapping CUSTOMER_MAP.
    Deploy table CUSTOMER.
    Deploy mapping CUSTOMER_MAP.
    Deploy dimension CUSTOMER (configured => Deploy All).
    Deploy table CUSTOMER.
    Deploy sequence <CUSTOMER_SEQ>
    Deploy mapping CUSTOMER_MAP.
    Deploy dimension CUSTOMER (configured => Deploy All).
    Start mapping to load table CUSTOMER.
    After this i am getting an error while i tried to view the data in the dimension
    ERROR:- ENT-09671 ERROR WHILE EXTRACTION DIMENSION METADATA FOR DIMENSION DATAVIEWER
    Thanks & Regards
    Pratik Lakhpatwala
    Jr Oracle DBA

    Not sure if it's valid to have a dimension with 1 hierarchy and 1 level in that hierarchy. The hierarchy may have to have at least 2 levels. If you want the configuration of a dimension with 1 hierarchy and 1 level, CWM2 may want you to omit the hierarchy, thus creating the dimension with only 1 level.

  • Error While Uploading GL Master Data in LSMW

    Hello Experts,
    I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
    Your help would be highly appreciated.
    Regards
    Muhammad Yousuf Ali
    SAP FI Consultant

    Hi,
    first can you pls check your Hierarchy mode setting in FS00 -  before executing Batch input session -
    Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
    then Now Run fresh LSMW - your issue will resolve
    Mahesh

  • Error while creating customer master data

    dear sir,
    i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
      again while creating one with same name showing error while maintaing sales level data
    Check: Table KNA1 does not exist, table KNVI does
    Message no. F2061
    plz help how do i rectify this problem and maintain the same cutomer no (external) again.
    regards,
    Debesh

    Hi,
    you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
    XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
    Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
    If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
    regards
    Vivek.
    Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

  • Error while extract DME file

    Hello Experts,
    One user is getting an error while extract DME (Payment File) from customized transaction. Other users are able to save the file on desired location.
    Error: C:\AB\filename.TXT not allowed in subscreens (Screen: )
    Please let me how to solve this issue.
    Thanks in advance.
    Regards,
    JA

    Closed Not Answered

Maybe you are looking for

  • How do I bookmark ALL tabs at one time?

    Firefox 3 allow all tabs to be bookmarked at one time. Please let me know how to do this with version 4. Thanks!

  • Determine the type of the caught exception

    Hi! Here is my problem : I'm using a web service and the method I call throws different types of Exception (RemoteException, ServiceException, etc...) And, the reaction to the caught exception depends on its type, that's why I need to determine what

  • Colour Space Incompatibility when viewing in safari/on Mac

    Hello, I am currently in the process of building a website for my photographic work using Dreamweaver. At the moment everything is fine when viewing on the computer i created it on...a PC on both Internet Explorer and Firefox. However, when viewing o

  • R/3 ABAP Under SRM

    Hi all, Please tell me which of the following from R/3 ABAP actualy used in SRM technical. 1)ALV 2)ALE-IDOC 3)BDC 4)SMARTFORM 5)Module pool 6)BADI 7)BAPI 8)USER EXIT Please answer as it will help me to decide wether to enter into SRM or not. Also ple

  • In Firefox Sync, Firefox Home - what does the option "Use Safari" in the app settings actually do?

    In the global settings page on the iPad, (this is where users can configure settings for each app.) there is an option for Firefox Home to "Use Safari". What does this setting actually do, or not do?