Error while fetching Stored procedure from JDev DB Adapter

Hello
I am facing a problem while configuring stored procedures from Jdeveloper using DB Adapter. I am using Sql Server 2005 as my database,Jdeveloper version is 10.1.3.1.Bpel Version is 10.1.3.3. Connection to the Sqlserver 2005 database is fine, but it shows only views and tables. I get the following error message when I try to add the sql stored procedure call
"An error occured while obtaining the database schemas.Verify that the database connection is valid , and is supported"
Can someone help me please.
Thanks,
Phani
Edited by: Phani on Oct 28, 2008 11:30 AM

I think you have two problems here. First, JDeveloper 10.1.3.1 doesn't support SQL Server stored procedures. There is a command-line utility that you can use to generate the required BPEL artifacts (WSDL and XSD). Second, you're using a 10.1.3.1 design-time with a 10.1.3.3 runtime. These are not compatible so you will likely run into namespace issues when you try to run your BPEL processes. You should upgrade your JDeveloper to 10.1.3.3. JDeveloper will support third-party databases in 11.1.1 including SQL Server 2005 (but not 2000), IBM DB2 v8.x and v9.x, DB2 AS/400, and MySQL. JDeveloper will support MySQL v5.2.6 and above because the INFORMATION_SCHEMA.PARAMETERS table was added at that time. The PARAMETERS table does not exist in MySQL versions prior to v5.2.6 so you will have to use the command-line utility.

Similar Messages

Error while calling stored procedure from Java

Hi Guys,
How are you everybody? I hope everything is goin fine on your side. I have one issue in PL/SQL while calling below stored procedures from Java.
Problem Description: We have a stored procedure PROCEDURE BULK_INSERTS (
V_SESSION_ID_TAB IN T_SESSION_ID_TAB_TYPE,
V_SERVICE_TYPE_TAB IN T_SERVICE_TYPE_TAB_TYPE,
V_SERVICE_LOCATION_TAB IN T_SERVICE_LOCATION_TAB_TYPE,
V_SERVICE_CALL_NAME_TAB IN T_SERVICE_CALL_NAME_TAB_TYPE,
V_SERVICE_CALL_START_TIME_TAB IN T_SERVICE_CALL_ST_TAB_TYPE,
V_SERVICE_CALL_END_TIME_TAB IN T_SERVICE_CALL_ET_TAB_TYPE,
V_SERVICE_CALL_DURATION_TAB IN T_SERVICE_CALL_DUR_TAB_TYPE,
V_STATUS_TAB IN T_STATUS_TAB_TYPE,
V_NOTES_TAB IN T_NOTES_TAB_TYPE
) and we are getting ora errors while calling this stored procedure from java.
All tab types are declared locally, at package level.
Here is error which occur while calling this sp:
{call BULK_PKG.BULK_INSERTS(?,?,?,?,?,?,?,?,?)}
And the parameter types we are using are:
SESSION_ID - NUM_TAB_TYPE
SERVICE_TYPE - VAR_TAB_TYPE
SERVICE_LOCATION - VAR_TAB_TYPE
SERVICE_CALL_NAME - VAR_TAB_TYPE
SERVICE_CALL_START_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_END_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_DURATION - NUM_TAB_TYPE
STATUS - VAR_TAB_TYPE
NOTES - VAR_TAB_TYPE
And the Exception stack trace is:
ERROR (com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServi
ceCallDAO.java:143)@ExecuteThread: '252' for queue: 'weblogic.kernel.Default') {Error attempting to save collected ESC data}
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.doBulkInsert(ExternalServiceCallDAO.java:220)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServiceCallDAO.java:138)
Please help my guys out of this. I will really appreciate all suggestions and advices.
Thank you everybody.

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Error while invoking stored procedure from BPEL process

Hi Folks,
I am facing the below mentioned issue while invoking a stored procedure in BPEL process :
I am trying to invoke a stored procedure from a BPEL process. The process runs fine for the first/second time, but gives the below error after that whenever i try to run the process :
file:/oracle/orasoa/bpel/domains/default/tmp/.bpel_ProvisionOrderASAPReqABCSImpl_1.0_50dd1595129e9bbb00560e31e7c18cef.tmp/DB_CALL_GetPendingSubscriptionProc.wsdl [ DB_CALL_GetPendingSubscriptionProc_ptt::DB_CALL_GetPendingSubscriptionProc(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DB_CALL_GetPendingSubscriptionProc' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the PROC_GET_PENDING_SUBSCR API. Cause: java.sql.SQLException: Io exception: Connection reset [Caused by: Io exception: Connection reset]
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
I am not getting how the BPEL is referring to the DB wsdl from the tmp folder. To resolve this issue, we have to stop the SOA server, delete the tmp files, and restart the server.
Any pointers in this regard will be really helpful.

First of all does this scenario occur again.
"Works first/second time. Later gives this error."
After you restart the SOA server are you able to reproduce this scenario?
As already pointed out and from the error message, database connection is reset.
If you find this error again, try this out.
em -> home / oc4j_soa -> Administration -> JDBC Resources
Use the "Test Connection" option for the Connection Pool that you are using for your database JNDI.
It comes back and say "Connection to "XYZCP" established successfully." it is good to use.
Run the BPEL process again and once you find the error, come back and test the connection.
If it comes back with Error, diagnose based on the error message received.
Cheers
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/

Error while calling stored procedure from apps adapter

Hi,
I am calling Oracle applications standard api to create ar invoice (XX_BPEL_TEST_APPS_ADAPTER_PKG is the name of wrapper package created by adapter) from apps adapter but getting the following error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'test_apps_adapter' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG.AR_INVOICE_API_PUB$CREATE_SIN API. An error occurred while preparing and executing the APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG.AR_INVOICE_API_PUB$CREATE_SIN API. Cause: java.sql.SQLException: ORA-06531: Reference to uninitialized collection ORA-06512: at "APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG", line 199 ORA-06512: at "APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG", line 909 ORA-06512: at line 1 Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6531" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Just wondering if anyone has faced a similar problem?

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

How to call multiple stored procedure from same DB Adapter

Hi,
I want to invoke 3 stored procedures from my message flow in BUS . I created a DB adapter and invoked 1 successfully . Now I don't to configure 2 other DB adapters for calling other 2 stored procedures . I want some how to be able to call the other 2 from the first DB adapter only . Somehow I need the flexibility to have procedure names as the operation names in 1 wsdl and be able to configure this in JDeveloper for this at time of DB adapter configuration . I am using 11G . Is it possible ?

You can probably create a DB adapter with operation type selected as Execute Pure SQL and write SQL code to invoke the stored procedures depending on the procedure name (which you can get as one of the parameters of DB Adapter).
However, Even if you were able to do it, the DB Adapter schemas are generated based on stored procedure parameter list and types. If you use Execute Pure SQL type of DB Adapter the schema will be generated based on the parameters which you are using in your custom SQL code within DB Adapter. Which means that if you want to add a new stored procedure as target which has a different name and different parameters then you will need to regenerate the DB adapter and update your custom SQL code. This also means that you will need to do regression testing interfaces to all stored procedures whenever there is any change in this DBAdapter.
Now, my question is why do you want to invoke multiple stored procedures from same DB adapter?
This is not a good way to design integration solutions and makes your services resistance to change as it will take more time to change and test.
If all that you want is to have a web service which can have different operations for different stored procedures then you should create three business services and create a wrapper proxy service which has one operation for each stored procedure, within the proxy transform and call the correct backend service (you can use operational branch). This way you have a modular code where each module (read interface to one stored procedure) can be independently modified and tested.

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Executing an Oracle Stored Procedure from Sender JDBC adapter

I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
   proposal_number,
   to_char(sequence_number),
   column_name,
   column_value,
   update_timestamp,
   update_user
   from
   coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
<i>I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.</i>

Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad

Error while calling a procedure from ESB

Hi,
I am calling a procedure from ESB using DB adapter. and in the routing rules i am mapping the i/p values for schema to procedure input variables using mappings(transformation) but the values are going as null to the procedure call.
Please help me out.
The exception follows...
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/ESB-Issues_issue3/db3.wsdl [ db3_ptt::db3(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'db3' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the SYSTEM.INSERT_ISSUE_PROC API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."ISSUES"."ISSUE_NAME")
ORA-06512: at "SYSTEM.INSERT_ISSUE_PROC", line 16
ORA-06512: at line 1
[Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."ISSUES"."ISSUE_NAME")
ORA-06512: at "SYSTEM.INSERT_ISSUE_PROC", line 16

This is likely being caused by a problem that we've seen a number of times. You'll have namespace issues and problems with NULLs if your JDev is 10.1.3.1 and SOA is 10.1.3.3 (or vice-versa). You MUST synchronize JDev 10.1.3.3 (or higher) with SOA 10.1.3.3 (or higher). It doesn't matter if you mix 10.1.3.3 and 10.1.3.4. You just need to get away from 10.1.3.1.

Error while invoking Stored Procedure.

Hi,
I am trying to invoke a stored procedure which has one input parameter and 3 output parameters. In the procedure, I am selecting 3 columns from a table based on the input parameter. I have generated a WSDL from database, along with wsdl an xsd has been created. I have used this WSDL in creating partner link on the target side. For source side partner link, I have created WSDL based on the xsd which is created from database. I have deployed this BPEL process and when I try to debug the flow it is failing while invoking the stored procedure I am getting below soap fault.
{color:#3366ff}<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="{color}{color:#3366ff}" xmlns:xsd="{color}{color:#3366ff}" xmlns:xsi="{color}{color:#3366ff}" xsi:schemaLocation="{color}{color:#3366ff} {color}{color:#3366ff}">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode xmlns="">SOAP-ENV:Server</faultcode>
<faultstring xmlns="">BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling}systemFault; Fault Data is <?xml version="1.0&;quot; encoding="UTF-8"?><jbi:message xmlns:sxeh="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling" type="sxeh:faultMessage" version="1.0&;quot; xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part>Error occured while executing SQL.call GETRESULTS(?,?,?,?) Reason: Unable to convert normalized message content to Procedure, Error occured during populating Procedure.Reason: Parameter Type Conflict: sqlType=12 SQLState: null ErrorCode:17012</jbi:part></jbi:message>. Sending errors for the pending requests in the process scope before terminating the process instance</faultstring>
<faultactor xmlns="">sun-bpel-engine</faultactor>
<detail xmlns="">
<detailText>BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling}systemFault; Fault Data is <?xml version="1.0&;quot; encoding="UTF-8"?><jbi:message xmlns:sxeh="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling" type="sxeh:faultMessage" version="1.0&;quot; xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part>Error occured while executing SQL.call GETRESULTS(?,?,?,?) Reason: Unable to convert normalized message content to Procedure, Error occured during populating Procedure.Reason: Parameter Type Conflict: sqlType=12 SQLState: null ErrorCode:17012</jbi:part></jbi:message>. Sending errors for the pending requests in the process scope before terminating the process instance
Caused by: BPCOR-6131:An Error status was received while doing an invoke (partnerLink=StoreProc, portType={http://j2ee.netbeans.org/wsdl/Storedproc}jdbcPortType, operation=execute)
BPCOR-6129:Line Number is 30
BPCOR-6130:Activity Name is Invoke1
Caused by: Error occured while executing SQL.call GETRESULTS(?,?,?,?) Reason: Unable to convert normalized message content to Procedure, Error occured during populating Procedure.Reason: Parameter Type Conflict: sqlType=12 SQLState: null ErrorCode:17012
Caused by: Unable to convert normalized message content to Procedure, Error occured during populating Procedure.Reason: Parameter Type Conflict: sqlType=12 SQLState: null ErrorCode:17012
Caused by: Parameter Type Conflict: sqlType=12</detailText>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
{color:#000000}Plz help me to fix this issue.
Thanks,
Srinivas{color}{color}

First of all does this scenario occur again.
"Works first/second time. Later gives this error."
After you restart the SOA server are you able to reproduce this scenario?
As already pointed out and from the error message, database connection is reset.
If you find this error again, try this out.
em -> home / oc4j_soa -> Administration -> JDBC Resources
Use the "Test Connection" option for the Connection Pool that you are using for your database JNDI.
It comes back and say "Connection to "XYZCP" established successfully." it is good to use.
Run the BPEL process again and once you find the error, come back and test the connection.
If it comes back with Error, diagnose based on the error message received.
Cheers
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/

Error while parsing Stored Procedure

Hi all,
i try to migrate a MS SQL Server 2000 database to Oracle 9.2 with the Migration Workbench and got into trouble with some Stored Procedures, that contain LEFT JOINS on SELECT-Statements. While parsing the following example Stored Procedure sp_test, an parse-error occurs (ENCOUNTERED: LEFT):
CREATE PROCEDURE [dbo].[sp_test]
AS
SELECT
FROM
tbl_Test1 AS test1
LEFT JOIN (Select * From tbl_Test2 Where column1 IS NOT NULL) AS test2 ON test1.test2_id = test2.id
GO
If i run this command in SQL-Worksheet, the SP is created correctly.
If i modify the SP as it follows, no parse-error-occurs:
CREATE PROCEDURE [dbo].[sp_test]
AS
SELECT
FROM
tbl_Test1 AS test1
LEFT JOIN tbl_Test2 AS test2 ON test1.test2_id = test2.id
GO
Is it a bug?
Thank you for help,
Torsten

Hi Torsten,
This has been logged as a bug 3635749.
There are no plans to fix this in the current release of the OMWB.
But the next release of the OMWB should cope with this issue.
Im afraid the workaround is to comment out the offending statement in the Source Model and reparse it to the Oracle Model. In the Oracle Model you will have to remove the comment and manually migrate the statement yourself.
Regards,
Dermot.

Error executing a stored procedure from SSIS using the MERGE statement between databases

Good morning,
I'm trying to execute from SSIS a stored procedure that compares the content of two tables on different databases in the same server and updates one of them. To perform this action, I've created a stored procedure in the destination database and I'm
comparing the data between tables with the MERGE statement. When I execute the procedure on the destination database the error that I obtain is:
"Msg 916, Level 14, State 1, Procedure RefreshDestinationTable, Line 13
The server principal "XXXX" is not able to access the database "XXXX" under the current security context."
Some things to take in account:
1. I've created a temporary table on the same destination database to check if the problem was on the MERGE statement and it works fine.
2. I've created the procedure with the option "WITH EXECUTE AS DBO".
I've read that it can be a problem of permissions but I don't know if I'm executing the procedure from SSIS to which user/login I should give permissions and which.
Could you give me some tip to continue investigating how to solve the problem?
Thank you,
Virgilio

Read Erland's article http://www.sommarskog.se/grantperm.html
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Error While Executing Stored Procedure - SAP BPC 5.0

Hi all
I have defined stored procedure 'EP2' in the account transformation rules and which runs fine with all the entities.
But when I filter particular entity which give no data extrace to the selections made instead of giving the comment:
0 rows created and update it gives the error below.
Kindly Help me out if any one has the idea of running stored procedure
Executing SPRUNCALCACCOUNT "[[FINANCE]],[[ACTUAL]],[[LC]],[[SPSCOPE_367693]],[[SPLOG_887033]],[[EP2]]"
SPRunCalcAccount Version 2.06
-ERR- CALC-070 No DATA Extract From FACT Table
Time to run stored procedure:2.8 sec.
Edited by: Harish Bysani Kodanda on Mar 14, 2008 8:46 AM
Edited by: Harish Bysani Kodanda on Mar 14, 2008 8:47 AM
Edited by: Harish Bysani Kodanda on Mar 14, 2008 8:48 AM

Yes, the business rules stored procedures surface an error if there is an empty data set to operate on.

Error Calling Oracle Stored Procedure From Within Report

Hi,
I have a report that calls an oracle stored procedure which returns a ref cursor. The report is working ok in our development environment when called from our development website through .NET.
When the report is moved and accessed from our UAT website we get the following error :-
Failed to open a rowset. Details: ADO Error Code: 0x Source: Microsoft OLE DB Provider for Oracle Description: One or more errors occurred during processing of command. Failed to open a rowset. Details: ADO Error Code: 0x Source: Microsoft OLE DB Provider for Oracle Description: ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'RHS_GET_CAND_SECTION_REFS' ORA-06550: line 1, column 7: PL/SQL: Statement ignored Native Error: Failed to open a rowset. Error in File C:\WINDOWS\TEMP\temp_d663a952-bef6-4bf7-bf1a-5e288afdb612 {9B6DFB38-A436-4940-9D80-B4C23DFFFF19}.rpt: Failed to open a rowset.
If we open the report manually we are prompted to enter database connection info. If we enter the UAT connection details the report runs ok. If we save the report and try to open it from UAT website through .NET it now opens ok.
If we then move that same report back to the development environment and open from our development website it fails with the same error above.
Both connections are using Microsoft OLE DB drivers and the Oracle databases are the same version (10.2.0.1.0).
Is the connection information being stored in actual report and somehow being used when the report is opened through .NET?
Any help appreciated
Regards
Paul

Hi,
Please let me know if the issue occurs with the crystal reports designer, if you are facing issues with the .NET application then a need to create a post [here|SAP Crystal Reports, version for Visual Studio;.
Regards,
Hitesh

Error while activating Stored Procedure

Hi All,
I am tried to create the Stored procedure but when I am trying to activate same then Procedure is not getting activated.
Please help.
Regards,
Neha Singla

Hi,
Error log:
Repository: Encountered an error in repository runtime extension;error preparing statement create procedure "_SYS_BIC"."test-pg/TEST" ( in IN_PERIO_TO NVARCHAR(7) , in IN_PERIO_FROM NVARCHAR(7) , in STRIP_DECIN_TT "_SYS_BIC"."test-pg/TEST/tabletype/STRIP_DECIN_TT" , out STRIPDEC_TT "_SYS_BIC"."test-pg/TEST/tabletype/STRIPDEC_TT" ) language SQLSCRIPT sql security invoker reads sql data as n /********* Begin Procedure Script ***********/ n BEGIN nnSTRIPDEC_TT = nSELECTntPERIO,ntTO_DECIMAL (SUM(VVGRW),10,0) AS VVGRW,ntTO_DECIMAL (SUM(VV010),10,0) AS VV010nFROMnt@STRIP_DECIN_TT@nWHEREntPERIO BETWEEN @IN_PERIO_FROM@ AND @IN_PERIO_TO@nGROUP BY PERIOnHAVING SUM(VV010) > 1000;n END; n /******** End Procedure Script ************/ for oid
Code:
BEGIN
STRIPDEC_TT =
SELECT
     PERIO,
     TO_DECIMAL (SUM(VVGRW),10,0) AS VVGRW,
     TO_DECIMAL (SUM(VV010),10,0) AS VV010
FROM
     @STRIP_DECIN_TT@
WHERE
     PERIO BETWEEN @IN_PERIO_FROM@ AND @IN_PERIO_TO@
GROUP BY PERIO
HAVING SUM(VV010) > 1000;
END;
Please help.
Regards,
Neha

Error While fetching content nodes from Weblogic Portal

Hi,
I am trying to deploy an application on Weblogic server which will connect to Weblogic portal repository and fetch content nodes from the specified repository. While accessing the repositroy nodes from my jsp code I get following error:
I am not very clear what is going wrong
Error 500--Internal Server Error
com.bea.content.RepositoryRuntimeException: Repository configuration error.
     at com.bea.content.manager.internal.RepositoryManagerImpl.getRepositoryOps(RepositoryManagerImpl.java:194)
     at com.bea.content.manager.internal.RepositoryManagerImpl.connect(RepositoryManagerImpl.java:141)
     at com.bea.content.manager.RepositoryManagerFactory.connect(RepositoryManagerFactory.java:46)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getRepositoryManager(VirtualRepositoryManagerImpl.java:306)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getSearchOps(VirtualRepositoryManagerImpl.java:332)
     at com.bea.content.federated.internal.itemloader.NodeSearchItemLoader.fetchItemIdentifiers(NodeSearchItemLoader.java:68)
     at com.bea.content.federated.internal.itemloader.DirectAccessItemLoaderBase.minimalResolve(DirectAccessItemLoaderBase.java:17)
     at com.bea.content.paging.internal.PagedListImpl.(PagedListImpl.java:89)
     at com.bea.content.federated.internal.SearchManagerImpl.search(SearchManagerImpl.java:55)
     at jsp_servlet.__test._jspService(__test.java:133)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3370)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
Caused by: javax.naming.NameNotFoundException: While trying to lookup 'examplesWebApp.BEA_content.RepositoryOpsHome' didn't find subcontext 'examplesWebApp'. Resolved ''; remaining name 'examplesWebApp/BEA_content/RepositoryOpsHome'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1138)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:246)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:205)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at com.bea.content.ContentEJBHomeCache.lookup(ContentEJBHomeCache.java:56)
     at com.bea.content.manager.internal.RepositoryManagerImpl.getRepositoryOps(RepositoryManagerImpl.java:187)
     at com.bea.content.manager.internal.RepositoryManagerImpl.connect(RepositoryManagerImpl.java:141)
     at com.bea.content.manager.RepositoryManagerFactory.connect(RepositoryManagerFactory.java:46)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getRepositoryManager(VirtualRepositoryManagerImpl.java:306)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getSearchOps(VirtualRepositoryManagerImpl.java:332)
     at com.bea.content.federated.internal.itemloader.NodeSearchItemLoader.fetchItemIdentifiers(NodeSearchItemLoader.java:68)
     at com.bea.content.federated.internal.itemloader.DirectAccessItemLoaderBase.minimalResolve(DirectAccessItemLoaderBase.java:17)
     at com.bea.content.paging.internal.PagedListImpl.(PagedListImpl.java:89)
     at com.bea.content.federated.internal.SearchManagerImpl.search(SearchManagerImpl.java:55)
     at jsp_servlet.__test._jspService(__test.java:133)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3370)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Unknown Source)

Repositories are essentially external to applications.
Applications are associated with repositories via repository configs. Repository configs allow applications to access repositories.
1. There is no special 'centralized repository'.
2. This can be done, but has caveats, especially around caching. If multiple applications have repo configs which refer to the same repository, there can be caching issues. For example, suppose apps A and B both have repo configs for accessing repo R. If you use app A to change some data in repo R, then try to read the change via app B, you can end up with cached data instead of the most recent data in repo R. This is something to be aware of with this type of configuration.
3. There is typically one WLP admin url per application. For example, if you have an application named 'FooApp', then the admin url can typically be found at 'http://localhost:7001/FooAppAdmin'. Application 'BarApp' may have an admin url at http://localhost:7001/BarAppAdmin.
You can use the weblogic server console at http://localhost:7001/console to see these -- click on Deployments, then click Monitoriing. In the Context Root column, you can see the various top-level context roots registered for this application.
4. Repositories are top-level possibly-shared entities, similar to databases.
Applications 'use' Repositories via Repository Configs.
Applications 'own' RepositoryConfigs, which allow them to 'use' a specific Repository.
It's possible to have multiple applications 'use' the same repository (each application would have to have its own RepoConfig referring to the same repository), but there can be caching issues with this configuration -- see (2).
Each application 'owns' its own set of repo configs, and therefore its own VCR namespace. The VCR namespace is compsed of the RepoConfigs that application 'owns'. For example, if an application has repository configs with names 'Repo1' and 'Repo2', then the VCR namespace includes /Repo1/... and /Repo2/...
Note that each RepoConfig entry has a name, which becomes its VCR namespace path. The path to a node in a repository begins with / followed by the name of the RepoConfig followed by /. Application A and application B may each be accessing Repo R, but via different names. For example, if A has the path to Repo R registered via name 'RepoR', then its VCR path to Repo R is /RepoR/... If B has the path to Repo R registered via the name 'R', then its VCR path to Repo R is /R/...

Error while fetching Stored procedure from JDev DB Adapter

Similar Messages

Maybe you are looking for