Error While Filtering a Particular Value in the Query Navigation
Hi ALL,
we have a time charecteristic 0FISCPER in our query and the output of the query is fine until we filter this on the variant V3 ,system is throwing an error
"System error in program SAPLRRK0 and form SORT_END_TRUE-01- (see long text)"
i have tried to fix this in "analysis and repair of infoobjects " by mentioning the name of the infocube then the system is showing the inconsistancies by the following messages
>>InfoCube XFIGL_C11 was marked as a Cube with an inconsistent time dimension.
>>Record with the DIMID 44 contains non-fitting time characteristics
>>This DIMID is used by 2475 records of the fact tables
>>No master data found for characteristic of test described subsequently
>>Time characteristic 0FISCPER value 102006000 does not fit with time char 0FISCPER3 val 0
this error is there both on the development and also the production servers. any light thrown on this issue is a awewlcome and i promise to reward points,
regards
Hi,
There are a couple of threads on the same issue.
Refer to these, just might be handy.
Re: Uncaught_exception in Report Designer
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report
Good Luck!
Sandeep Tudumu
Similar Messages
-
Retriving data from database on selecting particular value in the combo box
Hi,
On selecting the particular value from the combo box, the corresponding value of the other segement fields should be retrived from databse and displayed in the text boxBabel,
If you don't have a query bdoc and the business query that joins both 2 tables already, then please crate one.
After that, write this code on the change of the combobox.
You would have to change the names below for the Query, properties, anchor, parameters, controls.
===================================
Private Sub ctrlBankNameCombo_onValueChanged2(ByRef boundAttributeChanged As Boolean)
On Error Resume Next
Dim objBankQuery As BusinessQuery
Dim ObjBankCol As BusinessCollection
Dim strID As String
If Not boundAttributeChanged Then Exit Sub
strID = ""
strID = myanchor.bo.getAttribute("BankNameComboProperty") ' Bank ID
If strID <> "" Then
Set objBankQuery = gServices.factory.newBusinessQuery("MyNewQuery")
objBankQuery.Mandt = "000"
objBankQuery.BANKID = strID
Set ObjBankCol = objBankQuery.query
If Not ObjBankCol Is Nothing Then
ctrlBankAddress.Value = ObjBankCol.getAttribute(1, "BankAddress")
ctrlBankPhone.Value = ObjBankCol.getAttribute(1, "BankPhone")
End If
End If
===================================
Regards,
Vadim. -
Error while installing J2EE Add- In to the ABAP system
Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
SrinivasAnanda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you. -
Error while running 'ldifde.exe' to import the schema file
Hello,
I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution.
Regards.
Ashane Deshapriya ( MCP )Can you run these commands from an elevated powershell and try to install exchange.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
If that also fails please post the error.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Hello,
I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's. I have worked every error resolution I can find, but I can't get past this error.
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
Any assistance is appreciated.Are you running the installation from an ISO-file?
If so, then copy the files (preferably
Exchange 2013 w. SP1) to the local disk
and run the install with elevated privileges.
Martina Miskovic -
"Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
This error is not covered in your help documentation.
I have an active internet connection.
I have tried resetting the Sync on the laptop several times over the last few weeks.
Please advise.
ThanksHi!
It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox -
I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English
Hi,
Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
Let me know if this is helpful. -
Urgent: How to exclude a particular value from the selection in the infopac
How to exclude a particular value from the selection in the infopackage.
Ex: not load for cost center 10000
Thank you,
samHi Sam,
You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
Hope this helps... -
CHAR's value in the query but not in the report??
Hi all,
I loaded master data and crm transaction data from ODS to Cube. The data is in the cube but there is no value in my report when running it. EX: there are some CHARs in my report, I checked those CHARs have value in the query but it shows 'not assign' in my report when I run it. What happen?
Thanks.
J.Please see below text and also the sent link..
If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
cheers,
Vishvesh -
How to get the max value in the query??
Plant calday(mm.dd.yyyy) Soldout.Qty
0001 01.01.2005 10
0001 01.02.2005 20
0001 01.03.2005 05
0001 01.04.2005 16
0001 01.05.2005 10
0001 01.06.2005 14
From the above values , how can i findout Max(Soldout.Qty)(i.e 20) for the above week...Suppose present aggregation = summation...How can i findout the value in the Query??don't want to do changes to design...Hi Bhanu,
I tried the calculation results as...Maximum,..
But that will pick the maximum value among the avialable values..like
plant1 max 10
plant2 max 20
plant3 max 30
then it will show as..
plant1 max 30
plant2 max 30
...like this...but my case is
plant1 calday1 10
plant1 calday2 05
plan1 calday7 08
plant2 calday1 10
plant2 calday2 05
plan2 calday7 20
so for each set it need to bring the maximum value... -
Using item values in the query
Hi,
Is there a way I can use item values in the query...?
as an example, something like this
select a.*, :P20_CUST_NAME as CUSTOMER_NAME
from
table TEMP a;
haven't tried it yet but want to get the feedback first before making an attempt...
ThanksYes, as long as that item has a value in session state..
Thank you,
Tony Miller
Webster, TX -
Restrict the values in the Query Designer
Hi Gurus,
I want to Restrict PLANT or SALES ORG values in the Query Designer, in the Query, PLANT has selected in the rows and having variable and SALES ORG is display attribute of the PLANT. In this scenario How can we Restrict the values?
Thanks in Advance,
Ravi.Hi Ravi,
You cannot restrict values on the display attributes. Better change it to navigational attribute and check the box as navigational in the cube.
Regards
Ram -
Text Box Value in the Query Bind Parameter
Hi
I have to use text box value in the query bind parameter
Thanks to help...Hi,
- drag Execute with params
- use EL
Frank -
Error while saving a Sales Order in the CRM Mobile Application
Hi,
I am facing issues while saving a Sales Order in the CRM Mobile Application. I am getting the error message "Value Field KvLangu is not valid (Error: 236 / 1102)".
I would be very grateful if somebody had faced this issue before and this way could help me with some information.
Best Regards,
Rogerio Prado.Hi Rogerio,
You should put mobile sales related messages in the forum "CRM Mobile applications"
This error message is coming because the language table SMOT002 might be empty in your mobile client OR it does not have all the values which have been customized in the system.
You need to have subscription based on publication "customizing objects" assigned to your site.
Regards
Vivek -
Giving error while creating a sales contact for the previous year (2008)
Hi Friends,
We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
If any one has any idea, kindly help me.
Best regards,
Swarna SeetaHi Wolfhard,
Thanks for the reply.
You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
Thank you so much.
I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
Best regards,
Swarna Seeta
Maybe you are looking for
-
Performance issue with high CPU and IO
Hi guys, I am encountering huge user response time on a production system and I don’t know how to solve it. Doing some extra tests and using the instrumentation that we have in the code we concluded that the DB is the bottleneck. We generated some AW
-
How to do Migration of OWSM policy from development to staging
The technical document for OWSM states that it Supports migration of policy from development to staging, and then on to full-blown production, but there is no clear cut strategy given for the same in any of the documents. Can some body help me out in
-
Having Problem with Asian Fonts
I'm having a problem installing the packages ttf-arphic-ukai and ttf-arphic-uming. They install fine, but it completely corrupts all my fonts. Any new applications that are launched (or when KDE is relaunched) have nothing but boxes for the fonts, a
-
Create variable for key figures
Hi all, I have a query with a couple of key figures, f.e. Net Revenue, Net Sales and Volume. Now, I want my end users to have the option to <b>select</b> which <b>key figures</b> they want <b>to see</b>. How to do this? All good ideas will be appreci
-
SAP ECC 6.0 & BW/BI 7.0 Disk Image
Hi Experts, I want to practice BI7.0, so I found this SAP ECC 6.0 & BW/BI 7.0 Disk Image software available on ebay. Has anybody tried out and how does it work. Is it really good the IDES System to work on BI 7.0. Please advise I am planning to buy i