Error while joining server to Srv Pool. Visible only on 1 server out of 9

Hello,
I am hiaving issues with joining a server to the server pool
I have checked the 02cb ond ocfs2 config and they seem to be fine and in line with the other VM servers which are already added to the pool...
I have checked the DMESG and ovs-operation log and found the below errors.
The error logs are as follows..
DMESG
o2net: accepted connection from node vmclkxtt3bvms09.esptest.aurtest.national.com.au (num 8) at 10.12.72.89:7777
o2net: accepted connection from node vmclkxtt3bvms07.esptest.aurtest.national.com.au (num 6) at 10.12.72.87:7777
OCFS2 1.4.4
o2dlm: Nodes in domain 55465DB6F3604834910621BF4D229455: 0 1 2 3 4 5 6 7 8
(mount.ocfs2,11035,0):ocfs2_find_slot:243 ERROR: no free slots available!
(mount.ocfs2,11035,0):ocfs2_mount_volume:1461 ERROR: status = -22
ocfs2: Unmounting device (253,12) on (node 4)
o2net: no longer connected to node vmclkxtt3bvms01.esptest.aurtest.national.com.au (num 0) at 10.12.72.81:7777
o2net: no longer connected to node vmclkxtt3bvms02.esptest.aurtest.national.com.au (num 1) at 10.12.72.82:7777
o2net: no longer connected to node vmclkxtt3bvms03.esptest.aurtest.national.com.au (num 2) at 10.12.72.83:7777
ovs-operation.log
"2011-08-15 11:52:40" INFO=> ha_set_shutdown_mode: inform master agent, leave shutdown mode.
"2011-08-15 11:52:40" DEBUG=> ha_set_shutdown_mode: no master access information available.
"2011-08-15 11:52:40" INFO=> ha_set_shutdown_mode: remove shutdown mode flag.
"2011-08-15 12:14:36" INFO=> registered_hostname: hostname=10.12.72.85 => {"status": "SUCC"}
"2011-08-15 12:14:39" INFO=> clusterm_start_o2cb_service: reloading config from /etc/ocfs2/cluster.conf ...
"2011-08-15 12:14:40" INFO=> clusterm_start_o2cb_service: => {"status": "SUCC"}
"2011-08-15 12:14:48" INFO=> ha_get_hostname_ip: hostname=vmclkxtt3bvms05.esptest.aurtest.national.com.au;ip=10.12.72.85
"2011-08-15 12:14:49" INFO=> ha_check_ovs_mount: success.
"2011-08-15 12:14:50" INFO=> ha_get_ocfs2_config: success. nodes=ocfs2:8:10.12.72.89:7777,ocfs2:7:10.12.72.88:7777,ocfs2:6:10.12.7
2.87:7777,ocfs2:5:10.12.72.86:7777,ocfs2:4:10.12.72.85:7777,ocfs2:3:10.12.72.84:7777,ocfs2:2:10.12.72.83:7777,ocfs2:1:10.12.72.82:
7777,ocfs2:0:10.12.72.81:7777
"2011-08-15 12:15:05" ERROR=> clusterm_init_root_sr: <Exception: mount.ocfs2: Invalid argument while mounting /dev/mapper/mpath1p1
on /var/ovs/mount/DD741D59C40B42E797C193A6B8442B21. Check 'dmesg' for more information on this error.StackTrace:
File "/opt/ovs-agent-2.3/OVSXCluster.py", line 115, in clusterm_init_root_sr
sr.initialize()
File "/opt/ovs-agent-2.3/_storage/OVSFileSR.py", line 127, in initialize
self.sp.mount(mp)
File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 237, in mount
raise Exception(output)
"2011-08-15 12:15:33" INFO=> unregister_hostname: success.
"2011-08-15 12:15:33" INFO=> clusterm_teardown: success.
"2011-08-15 12:26:33" INFO=> ha_set_shutdown_mode: inform master agent, leave shutdown mode.
"2011-08-15 12:26:33" DEBUG=> ha_set_shutdown_mode: no master access information available.
"2011-08-15 12:26:33" INFO=> ha_set_shutdown_mode: remove shutdown mode flag.
"2011-08-15 12:39:50" INFO=> registered_hostname: hostname=10.12.72.85 => {"status": "SUCC"}
"2011-08-15 12:39:54" INFO=> clusterm_start_o2cb_service: reloading config from /etc/ocfs2/cluster.conf ...
"2011-08-15 12:39:55" INFO=> clusterm_start_o2cb_service: => {"status": "SUCC"}
"2011-08-16 12:35:20" INFO=> clusterm_init_sr: success.
"2011-08-16 12:35:34" ERROR=> clusterm_init_root_sr: <Exception: mount.ocfs2: Invalid argument while mounting /dev/mapper/OVS1p1 o
/var/ovs/mount/DD741D59C40B42E797C193A6B8442B21. Check 'dmesg' for more information on this error.StackTrace:
File "/opt/ovs-agent-2.3/OVSXCluster.py", line 115, in clusterm_init_root_sr
sr.initialize()
File "/opt/ovs-agent-2.3/_storage/OVSFileSR.py", line 127, in initialize
self.sp.mount(mp)
File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 237, in mount
raise Exception(output)
"2011-08-16 12:35:34" INFO=> ha_set_shutdown_mode: inform master agent, leave shutdown mode.
"2011-08-16 12:35:34" DEBUG=> ha_set_shutdown_mode: no master access information available.
"2011-08-16 12:35:34" INFO=> ha_set_shutdown_mode: remove shutdown mode flag.
"2011-08-17 10:57:43" INFO=> unregister_hostname: success.
"2011-08-17 10:57:43" INFO=> clusterm_teardown: success.
"2011-08-17 11:02:54" INFO=> registered_hostname: hostname=10.12.72.85 => {"status": "SUCC"}
"2011-08-17 11:02:57" INFO=> clusterm_start_o2cb_service: reloading config from /etc/ocfs2/cluster.conf ...
"2011-08-17 11:02:58" INFO=> clusterm_start_o2cb_service: => {"status": "SUCC"}
"2011-08-17 11:03:06" INFO=> ha_get_hostname_ip: hostname=vmclkxtt3bvms05.esptest.aurtest.national.com.au;ip=10.12.72.85
"2011-08-17 11:03:07" INFO=> ha_check_ovs_mount: success.
"2011-08-17 11:03:07" INFO=> ha_get_ocfs2_config: success. nodes=ocfs2:8:10.12.72.89:7777,ocfs2:7:10.12.72.88:7777,ocfs2:6:10.12.7
2.87:7777,ocfs2:5:10.12.72.86:7777,ocfs2:4:10.12.72.85:7777,ocfs2:3:10.12.72.84:7777,ocfs2:2:10.12.72.83:7777,ocfs2:1:10.12.72.82:
7777,ocfs2:0:10.12.72.81:7777
"2011-08-17 11:03:22" ERROR=> clusterm_init_root_sr: <Exception: mount.ocfs2: Invalid argument while mounting /dev/mapper/OVS1p1 o
/var/ovs/mount/DD741D59C40B42E797C193A6B8442B21. Check 'dmesg' for more information on this error.StackTrace:
File "/opt/ovs-agent-2.3/OVSXCluster.py", line 115, in clusterm_init_root_sr
sr.initialize()
File "/opt/ovs-agent-2.3/_storage/OVSFileSR.py", line 127, in initialize
self.sp.mount(mp)
File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 237, in mount
raise Exception(output)
"2011-08-18 09:31:32" INFO=> unregister_hostname: success.
"2011-08-18 09:31:32" INFO=> clusterm_teardown: success.
I ALSO rebooted the rest of the servers and ran an fsck.ocfs2 on all the shared repos. and the output is as below.. (just incase helps in TS..)
[root@vmclkxtt3bvms05 ~]# fsck.ocfs2 /dev/mapper/OVS1p1
fsck.ocfs2 1.4.3
fsck.ocfs2: Could not create domain while initializing the DLM
[root@vmclkxtt3bvms05 ~]# fsck.ocfs2 /dev/mapper/OVS2p1
fsck.ocfs2 1.4.3
Checking OCFS2 filesystem in /dev/mapper/OVS2p1:
label: <NONE>
uuid: f2 1e e8 69 21 6d 4e df a7 7e bd 12 55 3c 23 71
number of blocks: 142731492
bytes per block: 4096
number of clusters: 142731492
bytes per cluster: 4096
max slots: 8
/dev/mapper/OVS2p1 is clean. It will be checked after 20 additional mounts.
[root@vmclkxtt3bvms05 ~]# fsck.ocfs2 /dev/mapper/OVS1p1
fsck.ocfs2 1.4.3
fsck.ocfs2: Could not create domain while initializing the DLM
[root@vmclkxtt3bvms05 ~]# fsck.ocfs2 /dev/mapper/OVS3p1
fsck.ocfs2 1.4.3
Checking OCFS2 filesystem in /dev/mapper/OVS3p1:
label: <NONE>
uuid: 9d 08 3e e1 c5 e2 4e d8 a5 19 2e 1d 47 3a 0c 8e
number of blocks: 142731492
bytes per block: 4096
number of clusters: 142731492
bytes per cluster: 4096
max slots: 8
/dev/mapper/OVS3p1 is clean. It will be checked after 20 additional mounts.
[root@vmclkxtt3bvms05 ~]#
[root@vmclkxtt3bvms05 ~]# fsck.ocfs2 /dev/mapper/OVS4p1
fsck.ocfs2 1.4.3
Checking OCFS2 filesystem in /dev/mapper/OVS4p1:
label: <NONE>
uuid: 08 ee 37 92 5b 1c 4e a0 97 6b 39 6a 67 d5 6d 7f
number of blocks: 142731492
bytes per block: 4096
number of clusters: 142731492
bytes per cluster: 4096
max slots: 8
/dev/mapper/OVS4p1 is clean. It will be checked after 20 additional mounts.
Aug 18 09:50:27 vmclkxtt3bvms05 kernel: o2net: accepted connection from node vmclkxtt3bvms06.esptest.aurtest.national.com.au (num 5) at 10.12.72.86:7777
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: (o2net,4013,0):o2net_connect_expired:1667 ERROR: no connection established with node 8 after 30.0 seconds, giving up and returning errors.
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4101,0):dlm_request_join:1043 ERROR: Error -107 when sending message 510 (key 0x666c6172) to node 8
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4101,0):dlm_try_to_join_domain:1219 ERROR: status = -107
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4101,0):dlm_join_domain:1497 ERROR: status = -107
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4101,0):dlm_register_domain:1763 ERROR: status = -107
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4101,0):user_dlm_register_context:673 ERROR: status = -107
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4101,0):dlmfs_mkdir:493 ERROR: Error -107 could not register domain "55465DB6F3604834910621BF4D229455"
Aug 18 09:50:56 vmclkxtt3bvms05 kernel: o2net: no longer connected to node vmclkxtt3bvms06.esptest.aurtest.national.com.au (num 5) at 10.12.72.86:7777
Aug 18 09:51:09 vmclkxtt3bvms05 kernel: o2dlm: Nodes in domain F21EE869216D4EDFA77EBD12553C2371: 4
Aug 18 09:51:12 vmclkxtt3bvms05 puppetd[10246]: Could not request certificate: getaddrinfo: Temporary failure in name resolution
Aug 18 09:51:23 vmclkxtt3bvms05 kernel: o2net: accepted connection from node vmclkxtt3bvms06.esptest.aurtest.national.com.au (num 5) at 10.12.72.86:7777
Aug 18 09:51:50 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4113,0):dlm_join_domain:1477 Timed out joining dlm domain 55465DB6F3604834910621BF4D229455 after 92000 msecs
Aug 18 09:51:50 vmclkxtt3bvms05 kernel: (fsck.ocfs2,4113,0):dlmfs_mkdir:493 ERROR: Error -512 could not register domain "55465DB6F3604834910621BF4D229455"
Aug 18 09:51:51 vmclkxtt3bvms05 kernel: o2net: no longer connected to node vmclkxtt3bvms06.esptest.aurtest.national.com.au (num 5) at 10.12.72.86:7777
Aug 18 09:52:02 vmclkxtt3bvms05 kernel: o2dlm: Nodes in domain 9D083EE1C5E24ED8A5192E1D473A0C8E: 4
Aug 18 09:52:17 vmclkxtt3bvms05 kernel: o2dlm: Nodes in domain 08EE37925B1C4EA0976B396A67D56D7F: 4
PLS help. Thanks.

Deven Shanbhag wrote:
I have checked the DMESG and ovs-operation log and found the below errors.
(mount.ocfs2,11035,0):ocfs2_find_slot:243 ERROR: no free slots available!Your OCFS2 volume only has 8 node slots, so you can't add a 9th server. You need to use tune.ocfs2 to increase the number of node slots for the OCFS2 filesystem.

Similar Messages

  • DNS Error while joining the machine to domain.

    I get the below error while joining a new Win7 machine to the domain.
    I can ping and successfully resolve nslookup on both server and client machine.
    Both client and server (2008r2) are virtual machines, with private ip's on LAN...
    The following error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain
    magic.com:
    The error was: "DNS name does not exist."
    (error code 0x0000232B RCODE_NAME_ERROR)
    The query was for the SRV record for _ldap._tcp.dc._msdcs.magic.com
    Common causes of this error include the following:
    - The DNS SRV record is not registered in DNS.
    - One or more of the following zones do not include delegation to its child zone:
    magic.com
    com
    . (the root zone)
    For information about correcting this problem, click Help.
    Looks like some problem with my DNS.
    Also i tried to uninstall/ re-install the DNS role.
    What should be the TCP/IP network configuration???
    System Security analyst at CapG

    I get the below error while joining a new Win7 machine to the domain.
    I can ping and successfully resolve nslookup on both server and client machine.
    Both client and server (2008r2) are virtual machines, with private ip's on LAN...
    The following error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain
    magic.com:
    The error was: "DNS name does not exist."
    (error code 0x0000232B RCODE_NAME_ERROR)
    The query was for the SRV record for _ldap._tcp.dc._msdcs.magic.com
    Common causes of this error include the following:
    - The DNS SRV record is not registered in DNS.
    - One or more of the following zones do not include delegation to its child zone:
    magic.com
    com
    . (the root zone)
    For information about correcting this problem, click Help.
    Looks like some problem with my DNS.
    Also i tried to uninstall/ re-install the DNS role.
    What should be the TCP/IP network configuration???
    System Security analyst at CapG
    Also something to look in, i do not have the usual folders below 'Forward lookup zone', i.e, Sites, Home, tcp etc..
    I beleive these are required. I am not sure.!!. I did re-install the role, no change :-(
    System Security analyst at CapG

  • Error while joining 2 facts

    Hi ,
    i am getting error while joining 2 facts
    relation is sales-------time---------sales1 in physical layer and then drag sale1 in sales and given time-----------sales
    [nQSError: 46030] Field descriptor id 0 is beyond the maximum field count 0. (HY000)
    thanks

    Hi master,
    I am referring to sh schema in which
    customer,times are joined with sales table
    sales1(new table created from sales and imported)
    for an example sales1 is only joined with times table and there is no join between any other table
    so the requirement is that
    customer city year month sales sales1 required in the report how will get these 2 facts in the report when there is no joined
    when it is tested from sales with sales1 it shows black data in the same report
    is there any solution where it can map with time dimension with other dimensions as well
    thanks

  • Sync encountered an error while connecting: Server incorrectly configured

    I have started getting the following message for some reason. No one has been able to answer it on the user forums. Can you help please? "Sync encountered an error while connecting: Server incorrectly configured. Please try again"

    same thing, started today. i have pasted my sync-log here. my username has been changed from my real username to "username". i noticed the URL in the log. nslookup returns Non-authoritative answer:
    Name: sync-rr.phx.services.mozilla.com
    Addresses: 63.245.217.208
    63.245.217.207
    Aliases: phx-sync038.services.mozilla.com and i am able to surf to the page. it asks me for a username and password, in which i put my sync username & password. it seems to take the login/pass just fine but no page is served - it just sits on loading forever.
    1309215660360 Service.Main INFO Loading Weave 1.8.0
    1309215660371 Engine.Bookmarks DEBUG Engine initialized
    1309215660372 Engine.Forms DEBUG Engine initialized
    1309215660374 Engine.History DEBUG Engine initialized
    1309215660375 Engine.Passwords DEBUG Engine initialized
    1309215660376 Engine.Prefs DEBUG Engine initialized
    1309215660377 Engine.Tabs DEBUG Engine initialized
    1309215660378 Engine.Tabs DEBUG Resetting tabs last sync time
    1309215660379 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
    1309215660382 Service.Main DEBUG Caching URLs under storage user base: https://phx-sync038.services.mozilla.com/1.1/username/
    1309215660384 Service.Main INFO Starting sync at 2011-06-27 18:01:00
    1309215660384 Service.Main DEBUG In sync: should login.
    1309215660386 Service.Main INFO Logging in user username
    1309215661024 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
    1309215661025 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
    1309215661033 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
    1309215661034 Service.Main DEBUG Not syncing: login returned false.
    1309215661035 Service.Main DEBUG Clearing sync triggers.
    1309215664700 Service.Main INFO Logging in user username
    1309215664796 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
    1309215664797 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
    1309215664801 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
    1309215664802 Service.Main DEBUG Autoconnect failed: error.login.reason.server; retry in 89 sec.
    1309215699971 Service.Main DEBUG Clearing sync triggers.
    1309215704491 Service.Main INFO Starting sync at 2011-06-27 18:01:44
    1309215704492 Service.Main DEBUG In sync: should login.
    1309215704494 Service.Main INFO Logging in user username
    1309215704839 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
    1309215704840 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
    1309215704844 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
    1309215704845 Service.Main DEBUG Not syncing: login returned false.
    1309215704846 Service.Main DEBUG Clearing sync triggers.

  • ADI0052E: TSM API Error: ANS1311E (RC11)   Server out of data storage space

    Hello guys,
    I have a problem with the backup on MaxDB. It always fails with the following error message
    ADI0052E: TSM API Error: ANS1311E (RC11)   Server out of data storage space
    Has anyone faced this problem before? Any solution how could this be solved?
    Thanks for your help.
    Regards,
    Dan

    Hi Dan,
    Check the TSM server and make sure the primary storage pool that is defined
    as your copy destination for the management class you are using is not full
    and or you have not run out of scratch tapes. In either case a storage pool
    has filled up and cannot migrate data causing the RC11. This is usually what
    an RC11 Server out of data storage space means.
    I am sharing configuration for Oracle database. You can check similar configuration for MaxDB database.
    when i defined the node in my tsm server :
    REG NODE hostname_oracle password maxnummp=2, it was defined in standard storage pool, i moved it in other storage.
    Hope this is useful.
    Regards,
    Deepak Kori

  • HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    Error 3194:
    This device isn't eligible for the requested build
    It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

  • Coherence.jar in EAR - ejbmodule  error while joining cluster senior member

    Hi
    We are trying to package coherence in EAR to connect to JMS queue. The ejb MDB module when a message is received process the data and tries to connect to coherence cluster members - Looking at the following log - right coherence config file/override/pof are picked however while this new member join DistributedService - it fails.
    The senior member has 13001 partition, backup count 1. Both MDB module , coherence cluster use the same cache-config file.
    Can someone help me in this regard.
    Thanks
    sunder
    2011-10-12 11:18:05.351/2523.753 Oracle Coherence GE 3.7.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded cache configuration from "file:/data/blazecache/config/SDR-Cache-config.xml"
    2011-10-12 11:18:05.980/2524.382 Oracle Coherence GE 3.7.0.0 <D4> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): TCMP bound to /10.160.57.138:8092 using SystemSocketProvider
    2011-10-12 11:18:06.211/2524.613 Oracle Coherence GE 3.7.0.0 <Info> (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=41
    2011-10-12 11:18:06.211/2524.613 Oracle Coherence GE 3.7.0.0 <Info> (thread=Cluster, member=n/a): Increasing allowable variance to 19
    2011-10-12 11:18:06.538/2524.940 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=6): Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
    2011-10-12 11:18:06.539/2524.941 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=8): Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
    2011-10-12 11:18:06.553/2524.955 Oracle Coherence GE 3.7.0.0 <Info> (thread=Cluster, member=n/a): This Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "sdrcluster_dev.dell.com" with senior Member(Id=1, Timestamp=2011-10-12 09:43:00.859, Address=10.160.57.138:14001, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6992,member:BlazeCacheServerDEV01_1, Role=WeblogicWeblogicCacheServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
    2011-10-12 11:18:06.593/2524.995 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=2, Timestamp=2011-10-12 09:43:35.556, Address=10.160.57.138:14003, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6989,member:BlazeCacheExtendServerDEV01_1, Role=WeblogicWeblogicCacheServer) joined Cluster with senior member 1
    2011-10-12 11:18:06.595/2524.997 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=3, Timestamp=2011-10-12 09:43:35.983, Address=10.160.57.138:14005, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:7034,member:BlazeCacheServerDEV01_2, Role=WeblogicWeblogicCacheServer) joined Cluster with senior member 1
    2011-10-12 11:18:06.595/2524.997 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=6, Timestamp=2011-10-12 10:36:33.614, Address=10.160.57.138:8088, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
    2011-10-12 11:18:06.595/2524.997 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=8, Timestamp=2011-10-12 10:42:51.491, Address=10.160.57.138:8090, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
    2011-10-12 11:18:06.652/2525.054 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Cluster with senior member 1
    2011-10-12 11:18:06.653/2525.055 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1
    2011-10-12 11:18:06.653/2525.055 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache1 with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Cluster with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Management with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service DistributedCache1 with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service ExtendTcpProxyService with senior member 2
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 3 joined Service Cluster with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 3 joined Service Management with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 3 joined Service DistributedCache1 with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 6 joined Service Cluster with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 6 joined Service Management with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 8 joined Service Cluster with senior member 1
    2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 8 joined Service Management with senior member 1
    2011-10-12 11:18:06.661/2525.063 Oracle Coherence GE 3.7.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Started cluster Name=sdrcluster_dev.dell.com
    WellKnownAddressList(Size=1,
    WKA{Address=10.160.57.138, Port=14001}
    MasterMemberSet
    ThisMember=Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
    OldestMember=Member(Id=1, Timestamp=2011-10-12 09:43:00.859, Address=10.160.57.138:14001, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6992,member:BlazeCacheServerDEV01_1, Role=WeblogicWeblogicCacheServer)
    ActualMemberSet=MemberSet(Size=6, BitSetCount=2
    Member(Id=1, Timestamp=2011-10-12 09:43:00.859, Address=10.160.57.138:14001, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6992,member:BlazeCacheServerDEV01_1, Role=WeblogicWeblogicCacheServer)
    Member(Id=2, Timestamp=2011-10-12 09:43:35.556, Address=10.160.57.138:14003, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6989,member:BlazeCacheExtendServerDEV01_1, Role=WeblogicWeblogicCacheServer)
    Member(Id=3, Timestamp=2011-10-12 09:43:35.983, Address=10.160.57.138:14005, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:7034,member:BlazeCacheServerDEV01_2, Role=WeblogicWeblogicCacheServer)
    Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
    Member(Id=6, Timestamp=2011-10-12 10:36:33.614, Address=10.160.57.138:8088, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
    Member(Id=8, Timestamp=2011-10-12 10:42:51.491, Address=10.160.57.138:8090, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
    RecycleMillis=1200000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
    TcpRing{Connections=[3, 8]}
    IpMonitor{AddressListSize=0}
    2011-10-12 11:18:06.741/2525.143 Oracle Coherence GE 3.7.0.0 <D5> (thread=Invocation:Management, member=4): Service Management joined the cluster with senior service member 1
    2011-10-12 11:18:06.750/2525.152 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=6): Member 4 joined Service Management with senior member 1
    2011-10-12 11:18:06.751/2525.153 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=8): Member 4 joined Service Management with senior member 1
    2011-10-12 11:18:07.299/2525.701 Oracle Coherence GE 3.7.0.0 <Info> (thread=DistributedCache:DistributedCache1, member=4): Loaded POF configuration from "file:/data/blazecache/config/SDR-coherence-pof-config.xml"
    2011-10-12 11:18:07.306/2525.708 Oracle Coherence GE 3.7.0.0 <Info> (thread=DistributedCache:DistributedCache1, member=4): Loaded included POF configuration from "zip:/data/oracle/middleware/user_projects/domains/BlazeDEV/servers/BlazeJMS/tmp/_WL_user/BlazeMDBEAR/1pwed8/APP-INF/lib/coherence.jar!/coherence-pof-config.xml"
    2011-10-12 11:18:07.382/2525.784 Oracle Coherence GE 3.7.0.0 <D5> (thread=DistributedCache:DistributedCache1, member=4): Service DistributedCache1 joined the cluster with senior service member 1
    2011-10-12 11:18:07.454/2525.856 Oracle Coherence GE 3.7.0.0 <Warning> (thread=DistributedCache:DistributedCache1, member=4): This node is configured with a 'partition-count' value of 257, but the service senior is using a value of 13001; overriding the local configuration.
    2011-10-12 11:18:07.455/2525.857 Oracle Coherence GE 3.7.0.0 <Warning> (thread=DistributedCache:DistributedCache1, member=4): This node is configured with a 'backup-count' value of 1, but the service senior is using a value of 0; overriding the local configuration.
    2011-10-12 11:18:07.456/2525.858 Oracle Coherence GE 3.7.0.0 <Error> (thread=DistributedCache:DistributedCache1, member=4): Incompatible KeyAssociator implementation: this node is configured to use com.tangosol.net.partition.DefaultKeyAssociator, but the service senior is using com.dell.it.services.sdr.blazeload.partaffinity.BlazeCacheKeyAssociator; stopping the service.
    2011-10-12 11:18:07.466/2525.868 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=6): Member 4 left service DistributedCache1 with senior member 1
    2011-10-12 11:18:07.467/2525.869 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=8): Member 4 left service DistributedCache1 with senior member 1
    2011-10-12 11:18:07.477/2525.879 Oracle Coherence GE 3.7.0.0 <D5> (thread=DistributedCache:DistributedCache1, member=4): Service DistributedCache1 left the cluster
    2011-10-12 11:18:07.477/2525.879 Oracle Coherence GE 3.7.0.0 <Error> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=4): Error while starting service "DistributedCache1": java.lang.RuntimeException: Failed to start Service "DistributedCache1" (ServiceState=SERVICE_STOPPED)
    2011-10-12 11:18:07.477/2525.879 Oracle Coherence GE 3.7.0.0 <Error> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=4): at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:38)
    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
    at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:39)
    at com.tangosol.coherence.component.util.safeService.SafeCacheService.startService(SafeCacheService.CDB:5)
    at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
    at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
    at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:1102)
    at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:934)
    at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:916)
    at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1293)
    at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:294)
    at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
    at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:181)
    at com.dell.it.services.sdr.blazeinc.util.CustomerProductUpdate.recordExists(CustomerProductUpdate.java:267)
    at com.dell.it.services.sdr.blazeinc.util.CustomerProductUpdate.insert(CustomerProductUpdate.java:222)
    at com.dell.it.services.sdr.blazeinc.util.DataMapperUtility.mapToBean(DataMapperUtility.java:260)
    at com.dell.it.services.sdr.blazeinc.util.DataMapperUtility.mapToBean(DataMapperUtility.java:119)
    at com.dell.it.services.sdr.blazeinc.listener.BlazeMDB.onMessage(BlazeMDB.java:53)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

    The KeyAssociator implementation is MDB classpath as well.
    Here is the configuration override config
    ===========
    <coherence>
    <cluster-config>
         <member-identity>
    <cluster-name system-property="tangosol.coherence.cluster">sdrcluster_dev.XX.com</cluster-name>
         </member-identity>
    <unicast-listener>
    <!-- This set of well-known-addresses creates a cluster with two nodes -->
    <well-known-addresses>
    <!-- Each server in the cluster must have a unique <socket-address> id -->
    <socket-address id="austeochr01.us.XX.com">
    <address>austeochr01.us.XX.com</address>
    <port>14001</port>
    </socket-address>
    </well-known-addresses>
    </unicast-listener>
    <shutdown-listener>
    <enabled system-property="tangosol.coherence.shutdownhook">false</enabled>
    </shutdown-listener>
    <service-guardian>
         <timeout-milliseconds system-property="tangosol.coherence.guard.timeout">360000</timeout-milliseconds>
    </service-guardian>
    </cluster-config>
    <configurable-cache-factory-config>
    <class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
    <init-params>
    <init-param>
    <param-type>java.lang.String</param-type>
    <param-value system-property="tangosol.coherence.cacheconfig">/data/blazecache/config/SDR-Cache-config.xml</param-value>
    </init-param>
    </init-params>
    </configurable-cache-factory-config>
    </coherence>
    Here is the Cache config
    =========
    <?xml version="1.0" encoding="UTF-8"?>
    <cache-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="http://xmlns.oracle.com/coherence/coherence-cache-config"
         xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-cache-config/coherence-cache-config.xsd">
         <caching-scheme-mapping>
              <cache-mapping>
                   <cache-name>blaze-local-*</cache-name>
                   <scheme-name>blaze-local</scheme-name>
              </cache-mapping>
              <cache-mapping>
                   <cache-name>blaze-distributed-ASSET_HEADER_DATA</cache-name>
                   <scheme-name>blaze-distributed-AssetHeaderData</scheme-name>
              </cache-mapping>
              <cache-mapping>
                   <cache-name>blaze-distributed-ENTITLEMENT_SUMMARY_DATA</cache-name>
                   <scheme-name>blaze-distributed-EntitlementSummaryData</scheme-name>
              </cache-mapping>
         </caching-scheme-mapping>
         <caching-schemes>
              <local-scheme>
                   <scheme-name>blaze-local</scheme-name>
                   <expiry-delay>0</expiry-delay>
              </local-scheme>
              <distributed-scheme>
                   <scheme-name>blaze-distributed-AssetHeaderData</scheme-name>
                   <service-name>DistributedCache1</service-name>
                   <serializer>
                        <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
                        <init-params>
                             <init-param>
                             <param-type>java.lang.String</param-type>
                             <param-value>/data/blazecache/config/SDR-coherence-pof-config.xml</param-value>
                             </init-param>
                        </init-params>
                   </serializer>
                   <thread-count>40</thread-count>
                   <backup-count>0</backup-count>
                   <backup-storage>
                        <flashjournal-scheme />
                   </backup-storage>
                   <key-associator>
                        <class-name>com.XX.it.services.sdr.blazeload.partaffinity.BlazeCacheKeyAssociator</class-name>
              </key-associator>
    <partition-count>13001</partition-count>
    <task-hung-threshold>360000</task-hung-threshold>
    <task-timeout>360000</task-timeout>
    <backing-map-scheme>
    <partitioned>true</partitioned>
                        <read-write-backing-map-scheme>
                             <scheme-name>DBCacheLoaderScheme</scheme-name>
                             <internal-cache-scheme>
    <local-scheme>
    <expiry-delay>0</expiry-delay>
    <high-units>3</high-units>
    <unit-calculator>BINARY</unit-calculator>
    <unit-factor>1073741824</unit-factor>
    </local-scheme>
                             </internal-cache-scheme>
                             <read-only>true</read-only>
                        </read-write-backing-map-scheme>
                   </backing-map-scheme>
                   <autostart>true</autostart>
              </distributed-scheme>
              <distributed-scheme>
                             <scheme-name>blaze-distributed-EntitlementSummaryData</scheme-name>
                             <service-name>DistributedCache1</service-name>
                   <serializer>
                        <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
                        <init-params>
                             <init-param>
                             <param-type>java.lang.String</param-type>
                             <param-value>/data/blazecache/config/SDR-coherence-pof-config.xml</param-value>
                             </init-param>
                        </init-params>
                   </serializer>
                             <key-associator>
                   <class-name>com.XX.it.services.sdr.blazeload.partaffinity.BlazeCacheKeyAssociator</class-name>
                        </key-associator>
                             <thread-count>40</thread-count>
                             <backup-count>1</backup-count>
                             <backup-storage>
                                  <flashjournal-scheme />
                             </backup-storage>
              <partition-count>13001</partition-count>
                             <task-hung-threshold>360000</task-hung-threshold>
                             <task-timeout>360000</task-timeout>
                             <backing-map-scheme>
    <partitioned>true</partitioned>
                                  <read-write-backing-map-scheme>
                                       <scheme-name>DBCacheLoaderScheme</scheme-name>
                                       <internal-cache-scheme>
    <local-scheme>
    <expiry-delay>0</expiry-delay>
    <high-units>3</high-units>
    <unit-calculator>BINARY</unit-calculator>
    <unit-factor>1073741824</unit-factor>
    </local-scheme>
                                       </internal-cache-scheme>
                                       <read-only>true</read-only>
                                  </read-write-backing-map-scheme>
                             </backing-map-scheme>
                             <autostart>true</autostart>
              </distributed-scheme>
    <proxy-scheme>
    <service-name>ExtendTcpProxyService</service-name>
    <thread-count>5</thread-count>
    <acceptor-config>
    <tcp-acceptor>
    <local-address>
    <address system-property="tangosol.coherence.session.proxy.localhost"></address>
    <port system-property="tangosol.coherence.session.proxy.localport"></port>
    </local-address>
    </tcp-acceptor>
    </acceptor-config>
    <task-hung-threshold>360000</task-hung-threshold>
    <task-timeout>360000</task-timeout>
    <proxy-config>
    <cache-service-proxy>
    <enabled>true</enabled>
    </cache-service-proxy>
    <invocation-service-proxy>
    <enabled>true</enabled>
    </invocation-service-proxy>
    </proxy-config>
    <autostart system-property="tangosol.coherence.session.proxy"></autostart>
    </proxy-scheme>
              <class-scheme>
                   <scheme-name>default-backing-map</scheme-name>
                   <class-name>com.tangosol.util.SafeHashMap</class-name>
              </class-scheme>
         </caching-schemes>
    </cache-config>
    Thanks
    sunder

  • Error while starting server

    Hi All,
    we are getting below error while starting Admin Server.
    we have tried resetting boot.properties file and deleting ldap files, clearing caceh, tmp files but no luck.
    Please let us know if anyone has any solution:
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <WebLogicServer> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137206> <BEA-000000> <WebLogic Server "AdminServer" version:
    WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Notice> <Log Management> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137316> <BEA-170019> <The server log file /abcd/admin/soa_domain/aserver/soa_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Log Management> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137324> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Diagnostics> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137384> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "http" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "https" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137449> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137449> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137450> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137450> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137451> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137452> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137455> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137455> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137456> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <RJVM> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137472> <BEA-000570> <Network Configuration for Channel "AdminServer"
    Listen Address          199.25.245.5:49701
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137524> <BEA-002609> <Channel Service initialized.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Socket> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137594> <BEA-000436> <Allocating 4 reader threads.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Socket> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137596> <BEA-000446> <Native IO Enabled.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <IIOP> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137754> <BEA-002014> <IIOP subsystem enabled.>
    ####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138772> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138892> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_mN86Z6ErrPlX8QgPm9/flN0P8GA=>
    ####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138965> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139186> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139671> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139682> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139847> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Notice> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139848> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Critical> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139972> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Critical> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170139974> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User ohsadmin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User ohsadmin denied
         at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
         at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
         at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
         at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
         at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
         at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
         at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
         at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
         at $Proxy22.login(Unknown Source)
         at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
         at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
         at $Proxy40.authenticate(Unknown Source)
         at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
         at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    ####<Mar 19, 2012 10:15:40 AM CDT> <Notice> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140016> <BEA-000365> <Server state changed to FAILED>
    ####<Mar 19, 2012 10:15:40 AM CDT> <Error> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140016> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Mar 19, 2012 10:15:40 AM CDT> <Notice> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140019> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Mar 19, 2012 10:15:40 AM CDT> <Info> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140035> <BEA-000236> <Stopping execute threads.>

    This line in the error list may point you towards solution :
    +<1332170139972> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>+
    I reckon the boot.properties is not correct. You can recreate the file - adding the new credentials. Check the OBE [url http://st-curriculum.oracle.com/obe/fmw/wls/10g/r3/installconfig/enable_auto_login/boot_identity_file.htm]Enabling Auto Login by Using the Boot Identity File for more information.
    Thanks,
    EJ

  • Error while starting server in UNIX environment

    Hi,
    I am getting the following error while starting servers:
    Oracle BI Presentation Services 10.1.3.4 (Build 080726.1900) are starting up.
    Type: Error
    Severity: 40
    Time: Thu Jun 3 06:41:00 2010
    File: project/webcatalog/localwebcatalog.cpp Line: 761
    Properties: ThreadID-1
    Location:
         saw.catalog.local.readObject
         saw.catalog.local.loadCatalog
         saw.webextensionbase.init
         saw.sawserver
    Error outside of Presentation Catalog occurred.
    Type: Error
    Severity: 40
    Time: Thu Jun 3 06:41:00 2010
    File: project/webcatalog/localwebcatalog.cpp Line: 761
    Properties: ThreadID-1
    Location:
         saw.catalog.local.readObject
         saw.catalog.local.loadCatalog
         saw.webextensionbase.init
         saw.sawserver
    Error outside of Presentation Catalog occurred.
    Type: Error
    Severity: 20
    Time: Thu Jun 3 06:41:00 2010
    File: project/sawserver/main.cpp Line: 338
    Properties: ThreadID-1
    Location:
         saw.sawserver
    Error loading security account .
    Attempted to use an unconstructed lock.
    Current Owner thread id: 0 (0x0)
    Current thread id: 1 (0x1)
    Lock pointer: 0xf2a2efa8
    Lock created in file: server/include/Utility/Generic/SUGRecursiveLock.h
    Lock created on line: 34
    Lock created in function: NQRecursiveLock<NQCriticalSection>::NQRecursiveLock
    Error in file: server/Utility/Generic/NQThreads/SUGCriticalSection.cpp
    Error on line: 242
    Error in function: NQCriticalSection::Acquire
    /orapsdev/BI/setup/sawserver.sh[7]: 786638 IOT/Abort trap(coredump)
    Kindly help to find a solution to it.
    Regards,
    Rahul

    Hi
    I came accrossed this kind of problems before, when I checked the log, I found almost the same error you mentioned and the BI Preenstation services is not started up.
    As my experience, there would be something wrong with the presentation catalog, I changed the catalog to samplesales and it is ok, so I redeploy the specific catalog and then it is ok.
    hope this can help.
    thanks & regards
    henry

  • Certificate error while admin server startup (solaris 8, wls 8.1.4)

    HI All,
    I am getting the following error while starting up my admin server using startWebLogic.sh.
    <Feb 5, 2010 7:51:19 AM GMT> <Notice> <WebLogicServer> <BEA-000327> <Starting WebLogic Admin Server "BOS1-ADMIN" for domain "BOS1">
    java.io.IOException: Inconsistent security configuration, Certificate expired: [
    Version: V3
    Subject: EMAILADDRESS=******************, CN=***********, OU=********, O=************, L=*******, ST=*******, C=**
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: com.sun.net.ssl.internal.ssl.JSA_RSAPublicKey@672
    Validity: [From: Thu Feb 03 11:25:08 GMT 2005,
    To: Tue Feb 02 11:25:08 GMT 2010]
    Issuer: EMAILADDRESS=******************, CN=***********, OU=********, O=************, L=*******, ST=*******, C=**
    SerialNumber: 00
    Certificate Extensions: 3
    [1]: ObjectId: 2.5.29.14 Criticality=false
    SubjectKeyIdentifier [
    KeyIdentifier [
    0000: E9 1E E1 30 86 89 7E 1A 67 A2 58 5B 9D 8A 9E 7A ...0....g.X[...z
    0010: C1 CF C4 DA ....
    [2]: ObjectId: 2.5.29.35 Criticality=false
    AuthorityKeyIdentifier [
    KeyIdentifier [
    0000: E9 1E E1 30 86 89 7E 1A 67 A2 58 5B 9D 8A 9E 7A ...0....g.X[...z
    0010: C1 CF C4 DA ....
    EMAILADDRESS=******************, CN=***********, OU=********, O=************, L=*******, ST=*******, C=**
    SerialNumber: 00]
    [3]: ObjectId: 2.5.29.19 Criticality=false
    BasicConstraints:[
    CA:true
    PathLen:2147483647
    Algorithm: MD5withRSA
    Signature:
    0000: 74 15 DF 05 54 27 1D 1D D5 35 F4 99 24 1A 84 1C t...T'...5..$...
    0010: BF 93 25 FA 50 D7 1E 36 66 7F 30 1A EF 67 2A 79 ..%.P..6f.0..g*y
    0020: 4A 72 FD C1 3B 33 05 61 D0 52 92 2D 15 89 68 67 Jr..;3.a.R.-..hg
    0030: E8 13 A6 60 18 38 16 53 16 22 CC 4D 87 19 9F 30 ...`.8.S.".M...0
    0040: 28 F3 3C C0 4C C2 C4 34 69 D3 BA 5C B2 4D 8A FF (.<.L..4i..\.M..
    0050: AA DD BD 04 96 AF 69 05 73 77 8D 93 89 90 5D 23 ......i.sw....]#
    0060: E9 D0 CA 02 5A 20 39 40 85 12 A9 67 04 ED 7B 59 ....Z [email protected]
    0070: 34 FB 31 E7 AD F6 C0 AE E4 5E 66 BB 8E 7D 45 72 4.1......^f...Er
    at weblogic.t3.srvr.SSLListenThread.initSSLContext(SSLListenThread.java:205)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:139)
    at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1637)
    at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:890)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
    at weblogic.Server.main(Server.java:32)
    Any thoughts to share mates????
    I have already posted this topic in general discussion forum and as suggested by faisal posting here as well..Please let me know how to renew certificates????
    Cheers,
    Dinesh

    Hi Dinesh,
    Below are the steps to renew / get new certificates.
    Step A -- Create a Keystore file
    1. Using keytool, enter the following:
    keytool -genkey -alias server -keyalg RSA -keystore your_domain.jks
    'your_domain' in the command above should be the name of the domain you are securing. If you are ordering a Wildcard Certificate, do not include the * in the filename as it is not a valid filename character.
    2. You will be prompted to enter the information for your certificate.
    Please note: When prompted for the first and last name, DO NOT enter your first and last name. Instead, enter the name to which the certificate is being issued (e.g., www.yourdomain.com, mail.yourdomain.com, *.yourdomain.com).
    3. When prompted, enter 'y' or 'yes' to confirm. You will next be asked for a password. You will need to use this same password when generating a CSR and importing your certificates.
    Step B -- Generate a CSR from your new keystore
    1.     Use keytool to create a Certificate Signing Request from your keystore:
    keytool -certreq -alias server -keyalg RSA -file your_domain.csr -keystore your_domain.jks
    Again, 'your_domain' is the name of the domain you are securing. (without the * character if you are ordering a Wildcard Certificate).
    2.     Enter the keystore password.
    3.     Submit the CSR to the Certificate Authority for the certificates.
    Step C: Import and Install the Certificates.
    1.     First you will need to install the Root CA Certificate into your keystore. Copy-and-paste the root certificate from the body of the fulfillment email into a simple text editor such as Notepad.
    2.     Save the file to your server as trustroot.pem in the same directory where your keystore was created.
    3.     Using the java keytool command line utility, import the root certificate geotrustroot.pem into your keystore using the following command:
    keytool -import -alias geotrustca -keystore mykeystore -file geotrustroot.pem
    The command should be typed on one line. This command imports the GeoTrust Root CA Certificate into the keystore named mykeystore.
    Step D: Import and Install the SSL Server Certificate
    1.     Next install your SSL Server Certificate (public key) into your keystore. Copy-and-paste the server certificate from the body of the fulfillment email into a simple text editor such as Notepad.
    2.     Save the file to your server as public.pem in the same directory where your keystore was created.
    3.     Using the java keytool command line utility, import the SSL server certificate public.pem into your keystore using the following command:
    keytool -import -alias tomcat -keystore mykeystore -file public.pem
    The command should be typed on one line. This command imports the SSL server certificate into the keystore named
    mykeystore.
    Step E: Configuring Keystores
    1.     Both the GeoTrust root CA and SSL server certificates are now installed on your server. Next you will need to configure the keystores by following the instructions in the WebLogic documentation section Configuring Keystores.
    2.     Restart the WebLogic server.
    Hope the information helps.
    Regards,
    Raj

  • Scenario manager error while starting server

    can anyone please give the solution for the below error:
    15:26:33,796 ERROR [ScenarioManager] Error while trying to complete pending oper
    ation PendingDeletion[scenarioDeletion:3000001,/myscenario/custom.sdl,null,13457
    91138625]
    atg.process.ProcessException: Null value for property "subject" of repository it
    em individualScenario:10000002
    at atg.process.ProcessUtils.getNonNullPropertyValue(ProcessUtils.java:21
    1)
    at atg.process.ProcessManagerService.getSubject(ProcessManagerService.ja
    va:3093)
    at atg.process.ProcessManagerService.deleteIndividualInstance(ProcessMan
    agerService.java:3288)
    at atg.process.ProcessManagerService.deleteBatch(ProcessManagerService.j
    ava:3330)
    at atg.process.PendingDeletion.complete(PendingDeletion.java:340)
    at atg.process.PendingWorkThread.run(ProcessManagerService.java:17169)
    15:26:33,859 ERROR [ScenarioManager] Error while trying to complete pending oper
    ation PendingDeletion[scenarioDeletion:4000001,/myscenario/custom.sdl,[Segment 1
    ],1345791144734]
    atg.process.ProcessException: Null value for property "subject" of repository it
    em individualScenario:12000008
    at atg.process.ProcessUtils.getNonNullPropertyValue(ProcessUtils.java:21
    1)
    at atg.process.ProcessManagerService.getSubject(ProcessManagerService.ja
    va:3093)
    at atg.process.ProcessManagerService.deleteIndividualInstance(ProcessMan
    agerService.java:3288)
    at atg.process.ProcessManagerService.deleteBatch(ProcessManagerService.j
    ava:3330)
    at atg.process.PendingDeletion.complete(PendingDeletion.java:340)
    at atg.process.PendingWorkThread.run(ProcessManagerService.java:17169)

    atg.process.ProcessException: Null value for property "subject" of repository item individualScenario:This signifies that the subject property for your individual scenario is not referring to any user profile item which should not be the case. It could be because when your scenario is getting triggered there is no current user profile available. You will have to check your scenario definition segments that you have defined and the conditions when it is getting triggered.
    ATG scenarios are based on the concept of state machines. Scenario manager maintains state information for every individual profile going through each of the scenario segment and each user's state is stored in the profile repository in "scenarioInstances" property. "scenarioInstances" contains a set of individual scenario instances (repository items of type "individualScenario") which are currently associated with that user. "individualScenario" item has a subject property which points back to the "user" repository item. And in your case some segment of your scenario is getting triggered when subject is not available.

  • Sync encountered an error while connecting: Server incorrectly configured. Please try again.

    I have tried to do a clean install but it fails to resolve the above output message. Therefore I am now attaching my debug information to this forum hoping someone can help me in finding a solution to my problem. This error message will keep popping up for a good 10 minutes before it disappears. Is there anything wrong with the connection to the server? Thanks in advance.
    Begin---------------------------------------------------------------------
    1314540570586 Service.Main INFO Loading Weave 1.9.0
    1314540570606 Engine.Bookmarks DEBUG Engine initialized
    1314540570608 Engine.Forms DEBUG Engine initialized
    1314540570610 Engine.History DEBUG Engine initialized
    1314540570612 Engine.Passwords DEBUG Engine initialized
    1314540570613 Engine.Prefs DEBUG Engine initialized
    1314540570615 Engine.Tabs DEBUG Engine initialized
    1314540570616 Engine.Tabs DEBUG Resetting tabs last sync time
    1314540570617 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:6.0) Gecko/20100101 Firefox/6.0
    1314540570620 Service.Main DEBUG Caching URLs under storage user base: https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/
    1314540574645 Service.Main INFO Logging in user bdrm7wgmhta6obmt5qky2clk5wzoluy3
    1314540578833 Net.Resource WARN Caught unexpected exception Component returned failure code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsIHttpChannel.responseStatus] Stack trace: _onComplete()@resource://services-sync/resource.js:321 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568 in _onComplete.
    1314540578833 Net.Resource DEBUG Stack trace: _onComplete()@resource://services-sync/resource.js:321 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568
    1314540578834 Net.Resource DEBUG Caught exception Component returned failure code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsIHttpChannel.visitResponseHeaders] Stack trace: _onComplete()@resource://services-sync/resource.js:356 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568 visiting headers in _onComplete.
    1314540578835 Net.Resource DEBUG Stack trace: _onComplete()@resource://services-sync/resource.js:356 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568
    1314540578865 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
    1314540578865 Service.Main DEBUG Autoconnect failed: error.login.reason.server; retry in 62 sec.
    1314540630301 Service.Main DEBUG Clearing sync triggers.
    1314540639946 Service.Main INFO Logging in user bdrm7wgmhta6obmt5qky2clk5wzoluy3
    1314540643754 Net.Resource WARN Caught unexpected exception Component returned failure code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsIHttpChannel.responseStatus] Stack trace: _onComplete()@resource://services-sync/resource.js:321 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568 in _onComplete.
    1314540643755 Net.Resource DEBUG Stack trace: _onComplete()@resource://services-sync/resource.js:321 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568
    1314540643755 Net.Resource DEBUG Caught exception Component returned failure code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsIHttpChannel.visitResponseHeaders] Stack trace: _onComplete()@resource://services-sync/resource.js:356 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568 visiting headers in _onComplete.
    1314540643756 Net.Resource DEBUG Stack trace: _onComplete()@resource://services-sync/resource.js:356 < innerBind()@resource://services-sync/util.js:1180 < Channel_onStopRequest()@resource://services-sync/resource.js:568
    1314540643766 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
    1314540643767 Service.Main DEBUG Autoconnect failed: error.login.reason.server; retry in 211 sec.
    1314540664823 Service.Main DEBUG Clearing sync triggers.
    1314540672154 Service.Main DEBUG Clearing sync triggers.
    1314540675665 Service.Main DEBUG Clearing sync triggers.
    1314540687022 Service.Main DEBUG Clearing sync triggers.
    1314540699533 Service.Main DEBUG Clearing sync triggers.
    1314540707106 Service.Main DEBUG Clearing sync triggers.
    1314540711832 Service.Main DEBUG Clearing sync triggers.
    1314540720437 Service.Main DEBUG Clearing sync triggers.
    1314540739828 Service.Main DEBUG Clearing sync triggers.
    1314540745022 Service.Main DEBUG Clearing sync triggers.
    1314540751933 Service.Main DEBUG Clearing sync triggers.
    1314540787595 Service.Main DEBUG Clearing sync triggers.
    1314540798983 Service.Main DEBUG Clearing sync triggers.
    1314540812131 Service.Main DEBUG Clearing sync triggers.
    1314540853825 Service.Main INFO Logging in user bdrm7wgmhta6obmt5qky2clk5wzoluy3
    1314540855421 Net.Resource DEBUG mesg: GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/info/collections
    1314540855421 Net.Resource DEBUG GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/info/collections
    1314540855422 Service.Main DEBUG Fetching global metadata record
    1314540855718 Net.Resource DEBUG mesg: GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/storage/meta/global
    1314540855718 Net.Resource DEBUG GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/storage/meta/global
    1314540855719 Service.Main DEBUG Weave Version: 1.9.0 Local Storage: 5 Remote Storage: 5
    1314540855720 Service.Main INFO Sync key is up-to-date: no need to upgrade.
    1314540855720 Service.Main DEBUG Fetching and verifying -- or generating -- symmetric keys.
    1314540856025 Net.Resource DEBUG mesg: GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/info/collections
    1314540856025 Net.Resource DEBUG GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/info/collections
    1314540856026 Service.Main INFO Testing info/collections: {"meta":1314540354.7,"crypto":1314540357.35}
    1314540856027 CollectionKeys INFO Testing for updateNeeded. Last modified: 0
    1314540856027 Service.Main INFO CollectionKeys reports that a key update is needed.
    1314540856358 Net.Resource DEBUG mesg: GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/storage/crypto/keys
    1314540856358 Net.Resource DEBUG GET success 200 https://scl2-sync677.services.mozilla.com/1.1/bdrm7wgmhta6obmt5qky2clk5wzoluy3/storage/crypto/keys
    1314540856359 CollectionKeys INFO Updating collection keys...
    1314540856362 CollectionKeys INFO Setting CollectionKeys contents. Our last modified: 0, input modified: 1314540357.35.
    1314540856363 BulkKeyBundle INFO BulkKeyBundle being created for [default]
    1314540856363 CollectionKeys INFO Processing downloaded per-collection keys.
    1314540856363 CollectionKeys INFO Clearing CollectionKeys...
    1314540856363 CollectionKeys INFO Saving downloaded keys.
    1314540856363 CollectionKeys INFO Bumping last modified to 1314540357.35
    1314540856363 CollectionKeys INFO Collection keys updated.
    End-----------------------------------------------------------------------

    I had the same error,
    I accidentally saved the password server XXXX.services.mozilla.com
    Once the password unregistered, synchronization started to operate.
    for more logs, we can look at the variables in about: config and doing a search services.sync
    services.sync.lastSync may be useful to track the status of the synchronization
    Steph

  • Error in Sync, "Sync encountered an error while connecting: Server incorrectly configured, Please try again.". Is there a resolution. Sync Log included.

    Here is the Sync Log:
    1308190229312 Service.Main INFO Loading Weave 1.7b1pre
    1308190229352 Engine.Bookmarks DEBUG Engine initialized
    1308190229356 Engine.Forms DEBUG Engine initialized
    1308190229359 Engine.History DEBUG Engine initialized
    1308190229360 Engine.Passwords DEBUG Engine initialized
    1308190229361 Engine.Prefs DEBUG Engine initialized
    1308190229361 Engine.Tabs DEBUG Engine initialized
    1308190229363 Engine.Tabs DEBUG Resetting tabs last sync time
    1308190229364 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
    1308190229406 Service.Main DEBUG Caching URLs under storage user base: https://scl2-sync647.services.mozilla.com/1.0/zjhiq5ynbdrdwl3schxebrt44qovh2o3/
    1308190233814 Service.Main INFO Logging in user zjhiq5ynbdrdwl3schxebrt44qovh2o3
    1308190234400 Net.Resource DEBUG GET fail 503 https://scl2-sync647.services.mozilla.com/1.0/zjhiq5ynbdrdwl3schxebrt44qovh2o3/info/collections
    1308190234422 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
    1308190234423 Service.Main DEBUG Autoconnect failed: error.login.reason.server; retry in 112 sec.
    1308190237662 Service.Main DEBUG Clearing sync triggers.
    1308190293312 Engine.Forms WARN GUID query returned undefined; turn on Trace logging for details.
    1308190293313 Tracker.Forms WARN Attempted to add undefined ID to tracker
    1308190297072 Service.Main DEBUG Clearing sync triggers.
    1308190301718 Service.Main DEBUG Clearing sync triggers.
    1308190318259 Engine.Forms WARN GUID query returned undefined; turn on Trace logging for details.
    1308190318260 Tracker.Forms WARN Attempted to add undefined ID to tracker
    1308190321284 Service.Main DEBUG Clearing sync triggers.
    1308190346290 Service.Main INFO Logging in user zjhiq5ynbdrdwl3schxebrt44qovh2o3
    1308190346857 Net.Resource DEBUG GET fail 503 https://scl2-sync647.services.mozilla.com/1.0/zjhiq5ynbdrdwl3schxebrt44qovh2o3/info/collections
    1308190346876 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
    1308190346876 Service.Main DEBUG Autoconnect failed: error.login.reason.server; retry in 224 sec.
    1308190403656 Service.Main DEBUG Clearing sync triggers.

    Getting this as of today 8/26/11

  • Error while transporting modification in module pool of a specific infotype

    HI experts,
    While transporting some modifications that have be done on the PAI of a module pool of a specific infotype, we have an error with code return = 8, the error is --> Original object R3TRPROGMP900730 must not be changed!!!
    Any suggestion .
    Tanhks a lot .

    Hi ,
    Nice to know that your problem is solved. If any of the replies were usefull please acknowledge their work.
    And it would be great if you can just put in your remarks about the best  solution you had in solving that problem.
    It might be useful to other users when they encoutner such problem.
    BR,
    Vijay.

  • Internal error while joining a pc to domain

    hi, when i want to join the pc to the domain it says "an internal error occured" and the join process fail.
    i can ping the domain using fqdn and dns is working ok and the client is pointing to the appropriate dns server. also i have no anti virus installed and firewall is off. here is the netsetup.log file here.
    Note: when i prestage the computer the join process is ok with no problem
    can anyone help me?
    08/04 17:30:45 -----------------------------------------------------------------
    08/04 17:30:45 NetpValidateName: checking to see if 'vivaldi.au' is valid as type 3 name
    08/04 17:30:45 NetpCheckDomainNameIsValid [ Exists ] for 'vivaldi.au' returned 0x0
    08/04 17:30:45 NetpValidateName: name 'vivaldi.au' is valid for type 3
    08/04 17:30:54 -----------------------------------------------------------------
    08/04 17:30:54 NetpDoDomainJoin
    08/04 17:30:54 NetpMachineValidToJoin: 'OMM-7687492'
    08/04 17:30:54 NetpGetLsaPrimaryDomain: status: 0x0
    08/04 17:30:54 NetpMachineValidToJoin: status: 0x0
    08/04 17:30:54 NetpJoinDomain
    08/04 17:30:54 Machine: OMM-7687492
    08/04 17:30:54 Domain: vivaldi.au
    08/04 17:30:54 MachineAccountOU: (NULL)
    08/04 17:30:54 Account: vivaldi.au\administrator
    08/04 17:30:54 Options: 0x25
    08/04 17:30:54 OS Version: 5.1
    08/04 17:30:54 Build number: 2600
    08/04 17:30:54 ServicePack: Service Pack 3
    08/04 17:30:54 NetpValidateName: checking to see if 'vivaldi.au' is valid as type 3 name
    08/04 17:30:55 NetpCheckDomainNameIsValid [ Exists ] for 'vivaldi.au' returned 0x0
    08/04 17:30:55 NetpValidateName: name 'vivaldi.au' is valid for type 3
    08/04 17:30:55 NetpDsGetDcName: trying to find DC in domain 'vivaldi.au', flags: 0x1020
    08/04 17:30:59 NetpDsGetDcName: failed to find a DC having account 'OMM-7687492$': 0x525
    08/04 17:30:59 NetpDsGetDcName: found DC '\\001-002-001-204.vivaldi.au' in the specified domain
    08/04 17:30:59 NetpJoinDomain: status of connecting to dc '\\001-002-001-204.vivaldi.au': 0x0
    08/04 17:30:59 NetpGetLsaPrimaryDomain: status: 0x0
    08/04 17:30:59 NetpGetDnsHostName: Read NV Hostname: omm-7687492
    08/04 17:30:59 NetpGetDnsHostName: PrimaryDnsSuffix defaulted to DNS domain name: vivaldi.au
    08/04 17:30:59 NetpLsaOpenSecret: status: 0xc0000034
    08/04 17:30:59 NetpGetLsaPrimaryDomain: status: 0x0
    08/04 17:30:59 NetpLsaOpenSecret: status: 0xc0000034
    08/04 17:30:59 SamLookupNamesInDomain on OMM-7687492$ failed with 0xc0000073
    08/04 17:30:59 NetpJoinDomain: status of setting machine password: 0x534
    08/04 17:30:59 NetpJoinDomain: initiaing a rollback due to earlier errors
    08/04 17:30:59 NetpLsaOpenSecret: status: 0x0
    08/04 17:30:59 NetpJoinDomain: rollback: status of deleting secret: 0x0
    08/04 17:30:59 NetpJoinDomain: status of disconnecting from '\\001-002-001-204.vivaldi.au': 0x0
    08/04 17:30:59 NetpDoDomainJoin: status: 0x534
    08/04 17:30:59 -----------------------------------------------------------------
    08/04 17:30:59 NetpDoDomainJoin
    08/04 17:30:59 NetpMachineValidToJoin: 'OMM-7687492'
    08/04 17:30:59 NetpGetLsaPrimaryDomain: status: 0x0
    08/04 17:30:59 NetpMachineValidToJoin: status: 0x0
    08/04 17:30:59 NetpJoinDomain
    08/04 17:30:59 Machine: OMM-7687492
    08/04 17:30:59 Domain: vivaldi.au
    08/04 17:30:59 MachineAccountOU: (NULL)
    08/04 17:30:59 Account: vivaldi.au\administrator
    08/04 17:30:59 Options: 0x27
    08/04 17:30:59 OS Version: 5.1
    08/04 17:30:59 Build number: 2600
    08/04 17:30:59 ServicePack: Service Pack 3
    08/04 17:30:59 NetpValidateName: checking to see if 'vivaldi.au' is valid as type 3 name
    08/04 17:30:59 NetpCheckDomainNameIsValid [ Exists ] for 'vivaldi.au' returned 0x0
    08/04 17:30:59 NetpValidateName: name 'vivaldi.au' is valid for type 3
    08/04 17:30:59 NetpDsGetDcName: trying to find DC in domain 'vivaldi.au', flags: 0x1020
    08/04 17:31:03 NetpDsGetDcName: failed to find a DC having account 'OMM-7687492$': 0x525
    08/04 17:31:03 NetpDsGetDcName: found DC '\\001-002-001-201.vivaldi.au' in the specified domain
    08/04 17:31:03 NetpJoinDomain: status of connecting to dc '\\001-002-001-201.vivaldi.au': 0x0
    08/04 17:31:03 NetpGetLsaPrimaryDomain: status: 0x0
    08/04 17:31:03 NetpGetDnsHostName: Read NV Hostname: omm-7687492
    08/04 17:31:03 NetpGetDnsHostName: PrimaryDnsSuffix defaulted to DNS domain name: vivaldi.au
    08/04 17:31:03 NetpLsaOpenSecret: status: 0xc0000034
    08/04 17:31:03 NetpGetLsaPrimaryDomain: status: 0x0
    08/04 17:31:03 NetpLsaOpenSecret: status: 0xc0000034
    08/04 17:31:03 NetpManageMachineAccountWithSid: NetUserAdd on '\\001-002-001-201.vivaldi.au' for 'OMM-7687492$' failed: 0x54f
    08/04 17:31:03 NetpJoinDomain: status of creating account: 0x54f
    08/04 17:31:03 NetpJoinDomain: initiaing a rollback due to earlier errors
    08/04 17:31:03 NetpLsaOpenSecret: status: 0x0
    08/04 17:31:03 NetpJoinDomain: rollback: status of deleting secret: 0x0
    08/04 17:31:03 NetpJoinDomain: status of disconnecting from '\\001-002-001-201.vivaldi.au': 0x0
    08/04 17:31:03 NetpDoDomainJoin: status: 0x54f

    repadmin /showreps shows successfull. i can attach the log or any other thing u want. time is sync between clients and domain controllers. we have 4 domain controllers and there are 2500 users in it. the problem suddenly appears since we found out
    we can not join the clients to the domain at all. only the clients can be joined to the domain if the computer account is pre-created before in the domain..
    You're not just simply hitting the quota limit of 10 machine accounts?
    http://support.microsoft.com/kb/243327/
    Enfo Zipper
    Christoffer Andersson – Principal Advisor
    http://blogs.chrisse.se - Directory Services Blog

Maybe you are looking for