Error while loading text

Hi Gurus,
When loading text data for 0material,it is getting an error and for material description we have both characterstics and numerics .
*Error:"Data Records (00000000001E00000001):version(00000000001E00000001) is not valid."*
I can share the screen shot.
Please suggest,what to do?

Ramesh
We have around 15k materials and we have alraedy did the error handling,
even though data is not uploading
our description is like::
sodium acetate trihydrate
or
Nyacol bp 5480 silica in ethylene glycol
now tell me if we can load in this format

Similar Messages

  • Error while loading text data from R3 to BW

    Hi,
    After mapping my DataSource created in R/3 system to my Infosource, I was taken to the maintenance screen of the transfer structure. I proposed the transfer rules. But my traffic signal of my transfer rule is not turning green. If I continue to activate my transfer rules and then tried to schedule for data load. I encounter an error during extraction.
    I received a message in the AWB when trying to schedule the load.
    "Assign a language field to IOBJ 0LANGU; longtext"
    When I tried to schedule the load(by pressing continue for the message)
    I got the following errors:
    Transfer errors:
    --Data Package 1: Arrived in BW;Processing:Too many error records - update terminated.
    Processing errors:
    --Data Package 1(2821 Records):Errors occured
    Update(0new/0changed) Errors occured
    Record 1:COSTC45: Data record1('EI3 E'):Duplicate data record
    Similarly several records listed.
    Please help me solve this issue.  Thanks.

    Rad,
    See if SAP note# 492647 & 849501 is of some help in your scenario.

  • Language error while loading master data source for text

    Hi,
    We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
    "Error during multibyte alignment for language D (position 2)".
    Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
    Thanks
    VV

    Hey Vishal,
    If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
    Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
    Regards,
    Anjum.

  • Error while loading .....!!!

    Hi All,
    I am getting error while loading POS Data i.e 0RT_PA_TRAN_CONTROL..
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Error is: Update mode When Others is not supported by the extraction API
    Long Text:
    Update mode When Others is not supported by the extraction API
        Message no. R3011
    Diagnosis
        The application program for the extraction of the data was called using
        update mode When Others. However, this is not supported by the InfoSource.
    System Response
        The data extraction is terminated.
    Procedure
        Check for relevant OSS Notes, or send a problem message of your own.
    And also Please can anybody tell me what is the Update Mode i have to use in BI7 if our Data Source being loaded in other target with Delta Upload..?
    Your help will be appreciated..
    Regards,
    Kiran Telkar

    Hi,
    Caller 09 is basically Memory related error. Ask your BASIS to increase the size.
    Also check in the error log, the user ID u r using should have the proper authorization.

  • Error while loading data

    hi guys
    i got an error while loading infoobject atrributes
    i created characteristic info object "equipment" with Master data and text.
    when i loaded text it was working fine but the problem happened when i start
    loading attributes data.
    error code is as given below
    Check Load from InfoSource D92_EQUIP , Packet infpackage for equipment -attrib
    Please execute the mail for additional information.
    Data records were selected in the PSA
    Diagnosis
    Data records were marked as incorrect in the PSA.
    System response
    If error messages exist for the data records, the corresponding data packets were not updated using the PSA.
    Procedure
    Go into the PSA maintenance for the request and read the logged messages.
    You find the relevant messages for each record in the PSA table by double-clicking on the status of the record.
    Where necessary, edit the incorrect records or remove the error in another way.
    Post the incorrect data packets manually.
    Note that you are only permitted to edit and manually update the request if it is not contained in the request list in the InfoCube (see InfoCube administration). Where necessary, first delete it from the InfoCube.
    any advice ???its says problem with data records..but i couldnt find any
    regards
    abhi
    Message was edited by:
            Abhilash Muraleedharan

    Hi Abhilash,
    You can use the preview functionality in the external page to see if the reords are being pulled properly or not.
    If not then there is some problem with the file which you need to fix. Or might be the setting you have done in selecting the delimiter in BW or any setting. Also check your routines if you are using any.
    If the file is being pulled correctly try seeing the error message under the details tab in the monitor screen. That will give you an idea why the load is failing.
    Hope that helps.
    regards.

  • Error while loading Transactional data from NW BW Infoprovider

    Hi,
      I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
    Below is the transformation file content
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = TAB
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=NO
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT= 9999999999999
    ROUNDAMOUNT=
    *MAPPING
    ACCOUNT = 0ACCOUNT
    BUSINESSTYPE = *NEWCOL(NOBTYPE)
    BWSRC = *NEWCOL(R3)
    COMPANYCODE = 0COMP_CODE
    DATASRC = *NEWCOL(R3)
    FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
    GAME = *NEWCOL(NOGAME)
    INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
    PROBABILITY = *NEWCOL(NOPROB)
    PRODUCT = *NEWCOL(NOPROD)
    PROFITCENTER = 0PROFIT_CTR
    PROJECT = *NEWCOL(NOPROJECT)
    TIME = 0FISCPER
    VERSION = *NEWCOL(REV0)
    WEEKS = *NEWCOL(NOWEEK)
    SIGNEDDATA= 0AMOUNT
    *CONVERSION
    Below is the Error Log
    /CPMB/MODIFY completed in 0 seconds
    /CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
    /CPMB/CLEAR completed in 0 seconds
    [Selection]
    InforProvide=ZPCA_C01
    TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
    CLEARDATA= Yes
    RUNLOGIC= No
    CHECKLCK= Yes
    [Messages]
    Task name CONVERT:
    No 1 Round:
    Error occurs when loading transaction data from other cube
    Application: ACTUALREPORTING Package status: ERROR
    Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
    ANy Inpout will be appreciated.
    Sanjay

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • Error while loading document when user executes IW32

    we have brand new laptops and desktops installed SAP GUI 6.40 patch level 27 and microsoft office 2003.when the user tries to execute IW32 and click on the long text button.when we try to change the editor it is giving ERROR WHILE LOADING DOCUMENT
    ERROR WHILE LOADING DOCUMENT
    message no .sofficeintegration142
    DIAGNOSIS
    An internal error occured in the SAP Document  Container Control while loading  a document
    PROCEDURE
    If the error recurs,enter a problem message.There are notes relating to how to create the log file using the report SAPROFFICEINTEGRATIONTRACE1

    Hi Rajanarenderreddy,
    Were you able to resolve your problem?
    If so how? We have a customer that is experiencing the same problem.
    Thank you for your feedback.
    Br,
    Tom.

  • BI 7.0 - Error while loading data from R3 to PSA

    Hi,
    I transported Master Data ATTR/TEXT object from DEV to QA (BI 7.0 NW 2004s); and getting the following error while loading the data from R3 in to PSA using the InfoPackage.
    Any clue to resolve this issue is appreciated.
    Monitor - STATUS tab:
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Monitor - Details Tab:
    Extraction (messages): Errors occurred
    Error occurred in the data selection
    Request IDoc : Application document not posted
    Error Message:
    Diagnosis                                                                               
    In the source system, there is no transfer structure available for    
        InfoSource 0ACTIONTYPE_TEXT .                                                                               
    System Response                                                                               
    The data transfer is terminated.                                                                               
    Procedure                                                                               
    In the Administrator Workbench, regenerate from this source system the
        transfer structure for InfoSource 0COMPANY_TEXT .                                                                               
    Thanks,

    Hi,
    Pl try the below
    The l_dta data target that you want to load is an InfoObject (master data or text
    table).
    You must declare this for the InfoProvider in Transaction RSD1.
    You do this on the 'Master Data/Text' tab by assigning any InfoArea to the InfoObject.
    The InfoProvider (that is, this InfoObject) is then displayed below this InfoArea in
    the InfoProvider tree.
    Rregards,
    Senthil

  • BPC Error while loading master data from SAP BW

    Hello Guru,
    I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
    I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are  in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP  and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
    I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
    Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
    Q. Do i need to activate any BADI's for this or not ?
    I appreciate your help in advance. I trie

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • Problem while loading texts and authorization objects file in RAR

    Hi all,
           i am getting internet explorer error while loading the texts and authorization objects text files in RAR .actually we uploaded rule file before this,does this step causes any error ?if so how to resolve this error.do i need to remove all rules/risks and then load text and authorization files? is there any shortcut to renove all risks generated in one shot? please reply me soon to resolve this.
    Thanks,
    Joseph.

    Hi Joseph,
    Please make sure to convert both the files in UTF-8 encoding format and then try to upload the files again. This should resolve the issue and if not then please paste the logs here.
    Regards
    Harleen

  • Niping: error while loading shared libraries: libsapu16.so

    Hi SAP gurus,
    when trying to implement note # 500235, I got this error message on a Linux system:
    ./niping: error while loading shared libraries: libsapu16.so: cannot open shared object file: No such file or directory
    I know I have to add the library's path to LD_LIBRARY_PATH environment variable, but where is the path?
    I'm using SuSE Linux 9
    Thanks,
    Antonio

    ok... that solved the library problem.. thank you..
    now I'm having a connection refused error message:
    ***LOG Q0I=> NiPConnect2: SiPeekPendConn (111: Connection refused) [nixxi.cpp 8724]
    ERROR => NiTClientLoop: NiConnect (rc=-10) [nixxtst.cpp  2632]
    ERROR       partner not reached (host 10.1.206.20, service 3298)
    TIME        Mon Mar 12 12:18:22 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi.cpp
    LINE        8724
    DETAIL      NiPConnect2
    SYSTEM CALL SiPeekPendConn
    ERRNO       111
    ERRNO TEXT  Connection refused
    COUNTER     1

  • Unexpected fatal error while loading SWF

    I'm trying to install Muse through AAM and I get this error code in the log
    Got an unexpected fatal error while loading SWF: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="app:/Adobe AIR Application Installer.swf" errorID=0]

    Does the suggestion posted in your other thread helps?
    http://forums.adobe.com/message/5109761#5109761
    If not, try the steps here.
    http://forums.adobe.com/message/5086018#5086018
    Thanks,
    Vinayak

  • Error while loading shared libraries: librt.so.1: cannot open shared object

    error while loading shared libraries: librt.so.1: cannot open shared object
    I cant run my apache server v2.2.3.
    Can someone help me?
    thanks in advance

    That could be an accessibility issue. Check the user with whom you installed Apache server. Check the user has permissions to access the libraries.
    -Mahendra.

  • Error while loading shared libraries

    error while loading shared libraries
    I just installed 10g . on a Fedora Core 4 machine and after a reboot I tried to run sqlplus and got this type of error. I also got the same error when trying to lsnrctl status ...
    [oracle@localhost ~]$ sqlplus
    sqlplus: error while loading shared libraries: /apps/oracle/product/10g/lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
    [oracle@localhost ~]$
    declare -x CLASSPATH="/apps/oracle/product/10g/JRE:/apps/oracle/product/10g/jlib:/apps/oracle/product/10g/rdbms/jlib"
    declare -x EDITOR="vi"
    declare -x G_BROKEN_FILENAMES="1"
    declare -x HISTSIZE="1000"
    declare -x HOME="/home/oracle"
    declare -x HOSTNAME="localhost.localdomain"
    declare -x INPUTRC="/etc/inputrc"
    declare -x KDEDIR="/usr"
    declare -x LANG="en_US.UTF-8"
    declare -x LD_LIBRARY_PATH="/apps/oracle/product/10g/lib:/lib:/usr/lib"
    declare -x LESSOPEN="|/usr/bin/lesspipe.sh %s"
    declare -x LOGNAME="oracle"
    declare -x LS_COLORS="no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:"
    declare -x MAIL="/var/spool/mail/oracle"
    declare -x OLDPWD="/home/oracle"
    declare -x ORACLE_BASE="/apps/oracle"
    declare -x ORACLE_HOME="/apps/oracle/product/10g"
    declare -x ORACLE_SID="TST2"
    declare -x ORACLE_TERM="xterm"
    declare -x PATH="/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin"
    declare -x PWD="/home/oracle"
    declare -x QTDIR="/usr/lib/qt-3.3"
    declare -x SHELL="/bin/bash"
    declare -x SHLVL="1"
    declare -x SSH_ASKPASS="/usr/libexec/openssh/gnome-ssh-askpass"
    declare -x SSH_CLIENT="::ffff:192.168.1.152 2503 22"
    declare -x SSH_CONNECTION="::ffff:192.168.1.152 2503 ::ffff:192.168.121.8 22"
    declare -x SSH_TTY="/dev/pts/2"
    declare -x TERM="xterm"
    declare -x TMP="/home/oracle/tmp"
    declare -x TMPDIR="/home/oracle/tmp"
    declare -x USER="oracle"
    [oracle@localhost ~]$
    Any input would be highly appreciated.
    Thanks
    Ambrosius

    yap. got it..
    disabled SELinux then run it.
    I didn't get any errors and have it up and running. Here is what I did:
    Full Fedora Core 4 install with SELinux enabled (default settings). Then, after install, disable SELinux in the /etc/selinux/config file.
    Thanks
    Ambrosius

  • Error while Loading Budgets Using AMG

    Error while Loading Budgets Using AMG
    Dear All,
    I am trying to load Budgets into ORACLE Projects using AMG API's..
    I have developed PL/SQL which uses below procedures of pa_budget_pub package.
    init_budget;
    load_budget_line;
    execute_draft_budget;
    baseline_budget;
    Procedure execute_create_draft_budget fails with following error message.
    error message: Please enter a valid product code for this project.
    error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
    error message: Project: AC044. Please specify a valid resource list.
    error message: Project: AC044. Please specify a valid resource list.
    Could somebody explain me how to resolve this error message and load the budget lines.
    Thanks in Advance.
    Afsal Basha.

    What I'm saying is, verify the column name. Dont post if not possible.
    Example follows, with one table intentionally "hidden".
    SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
    SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
    TABLE_NAME                     COLUMN_NAME
    tEsT                           MaxNumber
    tEsT                           MaxnumbeR
    teST                           iD
    teST                           MaxNumberHth,
    Fredrik

Maybe you are looking for