Error While performing Budget Write Back using ERPi

Hi,
We are getting the following error while Importing the data for Budget Write back using ERPi.
"va.lang.Exception: Cannot get the olap server name for planning application GSECPLAN
ERPI Process Start, Process ID: 187
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Users\HYP_SV~1\AppData\Local\Temp\2\/aif_601_187.log
Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)]
Java Platform: java1.6.0_29
Call Servlet - START
Call Servlet - END
ERPI Process End, Process ID: 187"
The Write-back was working fine and we have done the write back successfully few days back. We have not made any changes in write back set up except some mapping.
Any clue on this issue?
Thanks & Regards,
Sunil.

Thanks John for your response.
I have already restarted the planning service and checked. But no luck.
Regards,
Sunil.
Edited by: 926629 on May 7, 2013 12:26 AM

Similar Messages

Illegal argument error while performing hierarchy drill down using RESTful SDK

As per SAP Web Intelligence RESTful web service SDK User Guide, trying to perform a drill on a webi report using a POST req as below -
https://<serverName>:7555/biprws/raylight/v1/documents/<docID>/reports/<reportID>/driller/instructions
Req body -
<instruction type="Down">
    <elementId><VTable ID></elementId>
    <from>
        <drillElement>
            <id>DP0.DO6</id>
           <filterValue><filter value></filterValue>
        </drillElement>
    </from>
    <to>
        <drillElement>
            <id>DP0.DO7</id>
            <hierarchyId>DP0.DH1</hierarchyId>
        </drillElement>
    </to>
</instruction>
Below is the error I am getting in the response. Looks like some issue with the Request body. please suggest.
400 Bad Request
<error>
   <error_code>WSR 00102</error_code>
   <message>Illegal argument</message>
   <stack_trace>com.sap.webi.raylight.RaylightException: Illegal argument
at com.sap.webi.raylight.context.Messenger.createException(Messenger.java:57)
at com.sap.webi.raylight.actions.driller.DrillInstructionAction.throwInvalidBodyWithIllegalArgument(DrillInstructionAction.java:399)
at com.sap.webi.raylight.actions.driller.DrillInstructionAction.execute(DrillInstructionAction.java:130)
at sun.reflect.GeneratedMethodAccessor7014.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.webi.raylight.actions.ActionInvoker.invokeWith(ActionInvoker.java:123)
at com.sap.webi.raylight.actions.ActionDispatcher.invoke(ActionDispatcher.java:105)
at com.sap.webi.raylight.RaylightServiceDriller.drill(RaylightServiceDriller.java:345)
at sun.reflect.GeneratedMethodAccessor7013.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.cxf.service.invoker.AbstractInvoker.performInvocation(AbstractInvoker.java:173)
at org.apache.cxf.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:89)
at org.apache.cxf.jaxrs.JAXRSInvoker.invoke(JAXRSInvoker.java:164)
at org.apache.cxf.jaxrs.JAXRSInvoker.invoke(JAXRSInvoker.java:242)
at org.apache.cxf.jaxrs.JAXRSInvoker.invoke(JAXRSInvoker.java:242)
at org.apache.cxf.jaxrs.JAXRSInvoker.invoke(JAXRSInvoker.java:242)
at org.apache.cxf.jaxrs.JAXRSInvoker.invoke(JAXRSInvoker.java:242)
at org.apache.cxf.jaxrs.JAXRSInvoker.invoke(JAXRSInvoker.java:91)
at org.apache.cxf.interceptor.ServiceInvokerInterceptor$1.run(ServiceInvokerInterceptor.java:58)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:439)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at org.apache.cxf.workqueue.SynchronousExecutor.execute(SynchronousExecutor.java:37)
at org.apache.cxf.interceptor.ServiceInvokerInterceptor.handleMessage(ServiceInvokerInterceptor.java:106)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:255)
at org.apache.cxf.transport.ChainInitiationObserver.onMessage(ChainInitiationObserver.java:113)
at org.apache.cxf.transport.servlet.ServletDestination.invoke(ServletDestination.java:102)
at org.apache.cxf.transport.servlet.ServletController.invokeDestination(ServletController.java:464)
at org.apache.cxf.transport.servlet.ServletController.invoke(ServletController.java:149)
at com.sap.bip.rs.server.servlet.BIPServletController.invoke(BIPServletController.java:93)
at org.apache.cxf.transport.servlet.AbstractCXFServlet.invoke(AbstractCXFServlet.java:148)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.handleRequest(AbstractHTTPServlet.java:179)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.doPost(AbstractHTTPServlet.java:103)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:641)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.service(AbstractHTTPServlet.java:159)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at com.businessobjects.sdk.actionfilter.WorkflowFilter.doFilter(WorkflowFilter.java:45)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:222)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:123)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:99)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:929)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1002)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:585)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:312)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:895)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:918)
at java.lang.Thread.run(Thread.java:761)
</stack_trace>
</error>

hello Rekha,
1. First I guess that the red parts:
<instruction type="Down">
    <elementId><VTable ID></elementId>
    <from>
        <drillElement>
            <id>DP0.DO6</id>
           <filterValue><filter value></filterValue>
        </drillElement>
    </from>
    <to>
        <drillElement>
            <id>DP0.DO7</id>
            <hierarchyId>DP0.DH1</hierarchyId>
        </drillElement>
    </to>
</instruction>
... are in your real workflow, effectively replaced by significant values.
2. then, thanks to the stack trace: this error should be thrown if DP0.DO6 is not used by <VTable ID>.
Can you please check with [GET application/xml] .../raylight/v1/documents/<docId>/reports/<reportId>/elements/<VTable ID> ?
3. Anyway, the error message thrown is totally not talkative and we'd better improve that. Which version are you using? 4.1 SP5 ?
Thanks and regards,
eric

Error while Loading Budgets Using AMG

Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.

What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME                     COLUMN_NAME
tEsT                           MaxNumber
tEsT                           MaxnumbeR
teST                           iD
teST                           MaxNumberHth,
Fredrik

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Error while Scheduling Full DB back up?

Hi gurus,
I got error while schedule full DB back up. I am follow all the steps.but i got this error.
1. go to DB13
2. select Day
3.select full DB backup
4.select time
5.select sid, msdb,inttape,verify backup
5.add.
our DB is MS-SQL server Data Base
client :222   user: admin
error: User not connected
2008-04-10 14:28:06.89 Server      Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
     Apr 14 2006 01:12:25
     Copyright (c) 1988-2005 Microsoft Corporation
     Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-04-10 14:28:06.89 Server      (c) 2005 Microsoft Corporation.
2008-04-10 14:28:06.89 Server      All rights reserved.
2008-04-10 14:28:06.89 Server      Server process ID is 308.
2008-04-10 14:28:06.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2008-04-10 14:28:06.89 Server      This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
2008-04-10 14:28:06.89 Server      Registry startup parameters:
2008-04-10 14:28:06.89 Server            -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2008-04-10 14:28:06.89 Server            -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2008-04-10 14:28:06.89 Server            -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2008-04-10 14:28:06.90 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-04-10 14:28:06.90 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2008-04-10 14:28:07.06 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2008-04-10 14:28:07.20 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-04-10 14:28:07.21 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Database mirroring has been enabled on this instance of SQL Server.
2008-04-10 14:28:18.89 spid4s      Starting up database 'master'.
2008-04-10 14:28:18.96 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-04-10 14:28:19.00 spid4s      SQL Trace ID 1 was started by login "sa".
2008-04-10 14:28:19.01 spid4s      Starting up database 'mssqlsystemresource'.
2008-04-10 14:28:19.04 spid4s      The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid4s      Server name is 'ERPPRD'. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid9s      Starting up database 'model'.
2008-04-10 14:28:19.29 spid9s      Clearing tempdb database.
2008-04-10 14:28:19.37 spid9s      Starting up database 'tempdb'.
2008-04-10 14:28:19.39 spid9s      Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:19.40 spid12s     The Service Broker protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     Service Broker manager has started.
2008-04-10 14:28:19.42 Server      A self-generated certificate was successfully loaded for encryption.
2008-04-10 14:28:19.43 Server      Server is listening on [ 'any' <ipv4> 1433].
2008-04-10 14:28:19.43 Server      Server local connection provider is ready to accept connection on [
.\pipe\SQLLocal\MSSQLSERVER ].
2008-04-10 14:28:19.43 Server      Server named pipe provider is ready to accept connection on [
.\pipe\sql\query ].
2008-04-10 14:28:19.43 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2008-04-10 14:28:19.43 Server      Dedicated admin connection support was established for listening locally on port 1434.
2008-04-10 14:28:19.43 Server      The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-04-10 14:28:19.43 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-04-10 14:28:19.48 spid21s     Starting up database 'msdb'.
2008-04-10 14:28:19.48 spid23s     Starting up database 'SRM'.
2008-04-10 14:28:19.48 spid22s     Starting up database 'PRD'.
2008-04-10 14:28:20.29 spid23s     Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.40 spid22s     Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2008-04-10 14:28:26.37 spid51      Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.53 spid51      Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.57 spid51      Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-04-11 00:00:56.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
2008-04-11 16:44:23.89 spid112     DBCC CHECKDB (PRD) started at Apr 11 2008 4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 16:52:47.53 spid107     DBCC CHECKDB (PRD) started at Apr 11 2008 4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 17:00:01.48 spid115     DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
2008-04-11 17:00:10.45 spid115     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:10.45 spid115     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:10.67 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:10.65 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:10.65 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:11.18 Backup      Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.54 spid101     DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
2008-04-11 17:00:15.60 spid101     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:15.60 spid101     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.60 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:15.60 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:02:57.57 spid114     DBCC CHECKDB (PRD) started at Apr 11 2008 5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 18:30:37.75 spid112     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
2008-04-11 18:54:52.10 spid114     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
2008-04-11 18:55:25.00 spid107     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
2008-04-12 00:00:30.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
This is error
anybody help me.
Regards,
balaram
Edited by: balaram reddy on Apr 14, 2008 8:44 PM

If your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79

NotSerializable error while trying to write arraylist

I am getting a NotSerializable error while trying to write an arraylist to a file.
Here's the part of the code causing problem
File temp = fileOpenerAndSaver.getSelectedFile(); // fileOpenerAndSaver is a JFileChooser object which has been created and initialized and was already used to select a file with
currentWorkingFile = new File (temp.getAbsolutePath() + ".gd");      // currentWorking file is a file object
try
     ObjectOutput output = new ObjectOutputStream (new BufferedOutputStream(new FileOutputStream(currentWorkingFile)));
     output.writeObject(nodeList); // <-- This is the line causing problem (it is line 1475 on which exception is thrown)
     output.writeObject(edgeList);
     output.writeObject(nodesWithSelfLoop);
     output.writeObject(nextId);
     output.writeUTF(currentMessage);
     output.close();
catch (Exception e2)
     JOptionPane.showMessageDialog (graphDrawer, "Unknown error writing.", "Error", JOptionPane.ERROR_MESSAGE);
     e2.printStackTrace();
} As far as what nodeList is -- it's an arraylist of my own class Node which has been serialized and any object used inside the class has been serialized as well.
Here is the declaration of nodeList:
     private ArrayList <Node> nodeList; // ArrayList to hold a list all the nodesLet me show you whats inside the node class:
private class Node implements Serializable
     private static final long serialVersionUID = -4625153386839971250L;
     /* edgeForThisNodeList holds all the edges that are between this node and another node
      * nodesConnected holds all the nodes that are connected (adjacent) to this node
      * p holds the top left corner coordinate of this node. The centre. of this node is at (p.x + 5, p.y + 5)
      * hasSelfLoop holds whether this node has a self loop.
      * **NOTE**: ONLY ONE SELF LOOP IS ALLOWED FOR A NODE.
     ArrayList <Edge> edgeForThisNodeList = new ArrayList <Edge> ();
     ArrayList <Node> nodesConnected = new ArrayList <Node> ();
     Point p;
     boolean hasSelfLoop = false;
     int index = -1;
     BigInteger id;
                 ... some methods following this....
}Here is the edge class
private class Edge implements Serializable
     private static final long serialVersionUID = -72868914829743947L;
     Node p1, p2; // The two nodes
     Line2D line;
      * Constructor:
      * Assigns nodes provided as appropriate.
      * Also calls the addEdge method on each of the two nodes, and passes
      * "this" edge and the other node to the nodes, so that
      * this edge and the other node can be added to the
      * data of the node.
     public Edge (Node p1, Node p2)
          this.p1 = p1;
          this.p2 = p2;
          line = new Line2D.Float(p1.p.x+5,p1.p.y+5,p2.p.x+5,p2.p.y+5);
          p1.addEdge(this, p2, true);
          p2.addEdge(this, p1, false);
     }Here is the error I am getting:
java.io.NotSerializableException: javax.swing.plaf.metal.MetalFileChooserUI
     at java.io.ObjectOutputStream.writeObject0(Unknown Source)
     at java.io.ObjectOutputStream.defaultWriteFields(Unknown Source)
     at java.io.ObjectOutputStream.writeSerialData(Unknown Source)
     at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
     at java.io.ObjectOutputStream.writeObject0(Unknown Source)
     at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source)
     at java.io.ObjectOutputStream.writeObject0(Unknown Source)
     at java.io.ObjectOutputStream.writeObject(Unknown Source)
     at MyPanel.save(MyPanel.java:1475)
     at GraphDrawer.actionPerformed(GraphDrawer.java:243)
     I inentionally did not write the whole error stack because it was way too long and I ran out of characters. But line 1475 is where I do the writeObject call. I also goet some weird not serialized exceptions before on some other classes that are not being written to the file or are not part of the object that I am writing. I serialized those classes and now it's this unknown object that's causing problems.
Edit: The problem may be due to the JFileChooser I am using to select the file as it is a non-serializable object. But I am not trying to write it to the file and in fact am just writing the arrayLists and BigInteger as objects to the file.
Edited by: Cricket_struck on Dec 21, 2009 1:25 PM
Edited by: Cricket_struck on Dec 21, 2009 1:32 PM
Edited by: Cricket_struck on Dec 21, 2009 2:16 PM

java.io.NotSerializableException: javax.swing.plaf.metal.MetalFileChooserUIThat's a Swing component and it is clearly related to the JFileChooser.
I also get some weird not serialized exceptions before on some other classes that are not being written to the file or are not part of the object that I am writing.That's a contradiction in terms. If you get NotSerialzableException it means the objects are being written. So they are reachable from the objects you're writing.
Edit: The problem may be due to the JFileChooser I am using to select the file as it is a non-serializable object.JFileChooser implements Serializable, but you're right, you shouldn't try to serialize it. But clearly this is the current problem. Somewhere you have a reference to it reachable via the object(s) you are serializing.
I suspect that Node and Edge inner classes and that you aren't aware that inner classes contain a hidden reference to their containing class. The solution for serializaition purposes is to make them static nested classes, or outer classes.

Error while performing Risk Analysis at user level for a cross system user

Dear All,
I am getting the below error, while performing the risk analysis at user level for a cross system (Oracle) user.
The error is as follows:
"ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPJ2EDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.RC:1
Can anyone please help.
Regards,
Gurugobinda

Hi..
Check the note # SAP Note 1121978
SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
Check for the following...
CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
ChangeThreadCountStep =50
InitialThreadCount= 100
MaxThreadCount =200
MinThreadCount =50
Regards
Gangadhar

Error while performing Oracle 11g upgrade

Hi,
I am facing error while performing an Oracle upgrade from 10.2.0.4 to 11.2.0.2.
DBUA was disconnected with error Ora 1092 Oracle instance terminated.
When tried to run manual upgrade it is showing the below error,
SQL> @catupgrd.sql
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC> The first time this script is run, there should be no error messages
DOC> generated; all normal upgrade error messages are suppressed.
DOC>
DOC> If this script is being re-run after correcting some problem, then
DOC> expect the following error which is not automatically suppressed:
DOC>
DOC> ORA-00001: unique constraint (<constraint_name>) violated
DOC> possibly in conjunction with
DOC> ORA-06512: at "<procedure/function name>", line NN
DOC>
DOC> These errors will automatically be suppressed by the Database Upgrade
DOC> Assistant (DBUA) when it re-runs an upgrade.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
DOC>######################################################################
DOC>######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the user running this script is not SYS. Disconnect
DOC> and reconnect with AS SYSDBA.
DOC>######################################################################
DOC>######################################################################
DOC>#
no rows selected
DOC>######################################################################
DOC>######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not correct for this script.
DOC> Perform "ALTER SYSTEM CHECKPOINT" prior to "SHUTDOWN ABORT", and use
DOC> a different script or a different server.
DOC>######################################################################
DOC>######################################################################
DOC>#
SELECT TO_NUMBER('MUST_BE_11_2') FROM v$instance
ERROR at line 1:
ORA-01722: invalid number
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Please help ASAP as this is a production system.
Thanks,
Prabhakar
Edited by: prabhakaryc on Jun 19, 2011 2:47 PM

prabhakaryc wrote:
Hi Orkun Gedik,
>
> Thank you for your quick reply.
>
> Yes i am running this on windows and i have set with correct ORACLE_HOME (11202 directory)
>
> Do you think any other reason ?
>
> I have seen this error log inside of catupgrd.sql and it seems to be very known error but i am not finding the solution anywhere ?
>
> Your quick reply helps me a lot.
>
> Thanks,
> Prabhakar
Hi Prabhakar,
>> DBUA was disconnected with error Ora 1092 Oracle instance terminated.
But, as far as I understand that you didn't completed DB upgrade succesfully. Under this circumstance, you shouldn't change ORACLE_HOME variable to 11.2.0.2. I suggest you that complete Oracle upgrade (restart DBUA) and do not execute upgrade procedures, manually.
Best regards,
Orkun Gedik

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

RequestTimeoutException error while invoking a BPEL process using RMI

Hi,
I am getting RequestTimeoutException error while invoking a BPEL process using this code:
Locator locator = LocatorFactory.createLocator(jndiProps);
String compositeDN = "default/"+processName+"!1.0";
Composite composite = locator.lookupComposite(compositeDN);
String serviceName = "client";
Service deliveryService = composite.getService(serviceName);
NormalizedMessage nm = new NormalizedMessageImpl();
nm.getPayload().put("payload", requestXml);
NormalizedMessage res = deliveryService.request("process", nm);
responseMap = res.getPayload();
The error stack trace is
weblogic.rmi.extensions.RequestTimeoutException: RJVM response from 'weblogic.rjvm.RJVMImpl@604f2d14 - id: '-361032376059206
2776S:10.67.232.164:[8001,-1,-1,-1,-1,-1,-1]:emaar_domain:soa_server1' connect time: 'Mon Jan 18 11:34:41 GST 2010'' for 'executeServiceMethod
(Loracle.soa.management.CompositeDN;Ljava.lang.String;Ljava.lang.String;[Ljava.lang.Object;) 'timed out after: 60000ms.
oracle.fabric.common.FabricInvocationException: weblogic.rmi.extensions.RequestTimeoutException: RJVM response from 'weblogic.rjvm.RJVMImpl@60
4f2d14 - id: '-3610323760592062776S:10.67.232.164:[8001,-1,-1,-1,-1,-1,-1]:emaar_domain:soa_server1' connect time: 'Mon Jan 18 11:34:41 GST 20
10'' for 'executeServiceMethod(Loracle.soa.management.CompositeDN;Ljava.lang.String;Ljava.lang.String;[Ljava.lang.Object;) 'timed out after: 6
0000ms.
        at oracle.soa.management.internal.facade.ServiceImpl.request(ServiceImpl.java:135)
        at com.gss.common.bo.BpelUtil.invokeBPELProcess(BpelUtil.java:81)
To add to it the BPEL process is executing successfuly and RMI call timeout is happening.
Can I know how to increase the related timeout value?

Have got the same problem. Scenario at my end is little different though.
I am trying to invoke a BPEL process from an ESB Service.
I am trying to look into it..
However, would be grateful, if someone can give some insight into this since many are running into this issue without being able to fix.
Ashish.

XML Parser Error while creating Web service Client using JAX RPC

hello evryone,
Im facing XML Parser Error while creating web service client using JAX RPC. Im using Net Beans IDE for development purpose. I have wrote configuration file for client. Now i want to create Client stub. However i dont know how to do this in Net Beans. So i tried to do it from Command promt using command :
wscompile -gen:client -d build -classpath build config-wsdl.xml
here im getting Error:
error parsing configuration file: XML parsing error: com.sun.xml.rpc.sp.ParseException:10: XML declaration may only begin entities
Please help me out.
Many thanks in advance,
Kacee

Can i use the client generated using jdeveloper 11g to import into the oracle forms 10g, i.e., form builder 10g. Currently this is the version we have in our office.

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

I am getting error while connecting to sqlplus by using apps account in 11i

i am getting error while connecting to sqlplus by using apps account in 11i. Does anyone has similar error.
[applmgr@appsc05t01 admin]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 14:34:52 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

yes.
login as: gorantla
[email protected]'s password:
Last login: Mon Sep 13 14:39:23 2010 from glng3wy9g1.actuant.pri
[gorantla@appsc05t01 ~]$ sudo su - applmgr
[applmgr@appsc05t01 ~]$ ora_setup
Available databases:
x = ATUXX
y = ATUYY
z = ATUZZ
Select database: \c
y
ORACLE_SID=ATUYY
IAS_ORACLE_HOME=/apps/ATUYY/atuyyora/iAS
ORACLE_HOME=/apps/ATUYY/atuyyora/8.0.6
APPL_TOP=/apps/ATUYY/atuyyappl
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$ tnsping ATUYY
TNS Ping Utility for Linux: Version 8.0.6.3.0 - Production on 13-SEP-2010 15:42:32
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=dbrac05t01-vip.actuant.pri)(PORT=1611))
OK (0 msec)
[applmgr@appsc05t01 ~]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 15:42:40 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

Error while applying LM-tools patch using JSPM

hi all,
I got error while applying LM-Tool patch using JSPM. following is the error log. How can i rectify it. please help.
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE"
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE"
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE"("NODE_ID" RAW(16) NOT NULL, "PARENT_I
D" RAW(16) , "NODE_TYPE" NUMBER(10) DEFAULT 0 NOT NULL, "NAME" NVARCHAR2(30) DE
FAULT ' ' NOT NULL, "TS" TIMESTAMP NOT NULL, "USER_ID" NVARCHAR2(30) )
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE"("NODE_ID" RAW(16) NOT NULL, "PARENT_I
D" RAW(16) , "NODE_TYPE" NUMBER(10) DEFAULT 0 NOT NULL, "NAME" NVARCHAR2(30) DE
FAULT ' ' NOT NULL, "TS" TIMESTAMP NOT NULL, "USER_ID" NVARCHAR2(30) )
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_R" ON "BC_MID_TREE"("PARENT_ID")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_R" ON "BC_MID_TREE"("PARENT_ID")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE UNIQUE INDEX "BC_MID_TREE_U" ON "BC_MID_TREE"("PARENT_ID",
"NAME")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE UNIQUE INDEX "BC_MID_TREE_U" ON "BC_MID_TREE"("PARENT_ID",
"NAME")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE" ADD PRIMARY KEY ("NODE_ID") NOT DEFERRA
BLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE" ADD PRIMARY KEY ("NODE_ID") NOT DEFERRA
BLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Next archive objec
t : dbtables/BC_MID_TREE_ITEM.gdbtable
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Next archive objec
t : dbtables/BC_MID_TREE_ITEM.gdbtable
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: <<< Analyze table
BC_MID_TREE_ITEM >>>
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: <<< Analyze table
BC_MID_TREE_ITEM >>>
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: predefined action
is: >>>DROP_CREATE<<<
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: predefined action
is: >>>DROP_CREATE<<<
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Action: DROP_CREAT
E
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Action: DROP_CREAT
E
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: DROP TABLE "BC_M
ID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: CREATE TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "NODE_ID" RAW(16) NOT NULL,
Mar 29, 2010 12:49:57... Info: "ITEM_ID" RAW(16)
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TRE
E_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "ITEM_ID"
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: ALTER TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: ADD PRIMARY KEY ("NODE_ID")
Mar 29, 2010 12:49:57... Info: NOT DEFERRABLE INITIALLY IMMEDIATE ENABLE VALIDAT
E
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: DROP TABLE "BC_M
ID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: CREATE TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "NODE_ID" RAW(16) NOT NULL,
Mar 29, 2010 12:49:57... Info: "ITEM_ID" RAW(16)
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TRE
E_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "ITEM_ID"
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: ALTER TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: ADD PRIMARY KEY ("NODE_ID")
Mar 29, 2010 12:49:57... Info: NOT DEFERRABLE INITIALLY IMMEDIATE ENABLE VALIDAT
E
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE_ITEM"("NODE_ID" RAW(16) NOT NULL, "ITE
M_ID" RAW(16) )
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE_ITEM"("NODE_ID" RAW(16) NOT NULL, "ITE
M_ID" RAW(16) )
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TREE_ITEM"("ITEM_ID"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TREE_ITEM"("ITEM_ID"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE_ITEM" ADD PRIMARY KEY ("NODE_ID") NOT DE
FERRABLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE_ITEM" ADD PRIMARY KEY ("NODE_ID") NOT DE
FERRABLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Analysis and adjus
tment of tables successfully executed
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Analysis and adjus
tment of tables successfully executed
Mar 29, 2010 12:49:57... Info: Finished successfully: development component 'tc/
slm/mid/dd'/'sap.com'/'MAIN_APL70P18_C'/'2712380'/'0', grouped by
Mar 29, 2010 12:49:57... Info: Starting to save the repository
Mar 29, 2010 12:49:57... Info: Finished saving the repository
Mar 29, 2010 12:49:57... Info: Starting: Update: Selected development component
'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_APL70P18_C'/'2712383'/'0' u
pdates currently deployed development component 'tc/archtech/browser/viewer/loca
tor'/'sap.com'/'MAIN_APL70VAL_C'/'1496536'/'0'.
Mar 29, 2010 12:49:57... Info: SDA to be deployed: /usr/sap/IRX/DVEBMGS02/SDM/ro
ot/origin/sap.com/tc/archtech/browser/viewer/locator/MAIN_APL70P18_C/0/2712383/t
carchtechbrowserviewerlocator.sda
Mar 29, 2010 12:49:57... Info: Software type of SDA: J2EE
Mar 29, 2010 12:49:57... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE A
pplication) *****
Mar 29, 2010 12:49:58... Info: Starting cluster instance processes.
Mar 29, 2010 12:50:03... Info: Starting the instance JC_PRDCIXI_IRX_02 running o
n host PRDCIXI_svc
Mar 29, 2010 12:50:03... Info: Starting the instance JC_PRDCIXI_IRX_02 processes
. The instance is running on host PRDCIXI_svc
Mar 29, 2010 12:50:03... Info: Starting the process dispatcher
Mar 29, 2010 12:50:03... Info: Starting the process server0
Mar 29, 2010 6:49:58 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE App
lication) *****
Mar 29, 2010 6:49:58 PM Error: Aborted: development component 'tc/archtech/brow
ser/viewer/locator'/'sap.com'/'MAIN_APL70P18_C'/'2712383'/'0', grouped by softwa
re component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P19_C'/'1000.7.00.19.0.200904271432
29''/'0':
SDM could not start the J2EE cluster on the host PRDCIXI! The online deployment
is terminated.
A timeout occured during the cluster running verification.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDepl
oyerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Mar 29, 2010 6:49:58 PM Info: Starting to save the repository
Mar 29, 2010 6:49:59 PM Info: Finished saving the repository
Mar 29, 2010 6:49:59 PM Info: Starting: Update: Selected software component 'LM
-TOOLS'/'sap.com'/'MAIN_APL70P19_C'/'1000.7.00.19.0.20090427143229''/'0' updates
currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P14_C'/'1
000.7.00.14.1.20080124101556''/'0'.
Mar 29, 2010 6:49:59 PM Error: Aborted: software component 'LM-TOOLS'/'sap.com'
/'MAIN_APL70P19_C'/'1000.7.00.19.0.20090427143229''/'0':
Failed deployment of SDAs:
development component 'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_APL70
P18_C'/'2712383'/'0' : aborted
Please, look at error logs above for more information!
Mar 29, 2010 6:49:59 PM Info: Starting to save the repository
Mar 29, 2010 6:49:59 PM Info: Finished saving the repository
Mar 29, 2010 6:49:59 PM Info: Restoring the state of the instance (JC_PRDCIXI_I
RX_02) process server0 from Stopped to Running
Mar 30, 2010 12:50:00... Error: Received exception when restoring Engine state:
A timeout occured during the cluster state restore verification.
Mar 30, 2010 12:50:00... Error: -
At least one of the Deployments
failed -
Regards,
Priya

Hi Priya,
As per your error message, there is problem with the SDM is not starting after finishing deployment on SAP J2EE Engine Deployment. Development component are not deployed properly due to error message
> SDM could not start the J2EE cluster on the host PRDCIXI! The online deployment is terminated. A timeout occured during the cluster running verification. P
Please check the default timeout and increased as requred.
Please check the below thread to rectify this issue.
SDM Troubleshooting : http://help.sap.com/saphelp_nw04/helpdata/de/76/fb72ec091f4bf8a2d8ba321bb7e8d9/frameset.htm
SDM Troubleshooting : https://cw.sdn.sap.com/cw/docs/DOC-29627:
Hope it helps
Regards
Arun

Error while load data into Essbase using ODI

Hi ,
I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
File "<string>", line 79, in ?
com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
Thanks
Venu

Are you definitely running it against an agent where that path exists.
Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
Cheers
John
http://john-goodwin.blogspot.com/

Error While performing Budget Write Back using ERPi

Similar Messages

Maybe you are looking for