Error while picking

Hi Friends
I am facing an error while picking goods (after SO while doing OBD) which says "Batch / Valuation types not completely allocated" in Incompletion Log.
There are enough stock of material in batch for the order to be processed.
Can you help me please ?
Thank You
VG

Go to Va02 specify batch material no and check the status on status bar----->goto the line item put(*) in the batch field or press f4 and choose the batch no .
thanks,
Abhay..

Similar Messages

Urgent:Error while picking up of data from Queue in Weblogic-10.0

I have put a mesage in queue using a business service and one of my proxy-service is picking the data from same queue whenever data is available.However, business service is working fine and data is being entered into the queue but proxy service is not able to pick the data from the same Queue(path and connection factory and Queue names are absolutely same for both the proxy service and business service. It's giving error:
**<[ACTIVE] ExecuteThread*: '10' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1241533175480> <BEA-387027>*
Please help ASAP in the scenerio.
Regards
Gagandeep Singh

Singh,
That's not an error message but simply an informational message that Welogic is tuning parameters to manage load.
You can use the JMS monitor inside WebLogic to monitor your queue and the number of pending messages.
What we have found, is that unless a topic is being fed data, the topic must be connected by the feeder before the subscriber, or the subscriber never receives data (why that is, I'm not sure).
I suggest adding a log entry as the very first thing in your receiving proxy service. Sent data to "error" and just write a test message. You should see that message every time you get a message. This takes out situations where namespace problems returns empty sets and a service doesn't look like it's working. You can also use the dashboard to monitor the receiving service, to verify that a service is being called/run.
Lastly, does your receiving service work when you run it in the debugger with manually entered data? It's been my experience that when I don't get a response, that my proxy service has errors in it.

Urgent:Error while picking up of data from Queue in Weblogic-10.0 with ALSB

I have put a mesage in queue using a business service and one of my proxy-service is picking the data from same queue whenever data is available.However, business service is working fine and data is being entered into the queue but proxy service is not able to pick the data from the same Queue(path and connection factory and Queue names are absolutely same for both the proxy service and business service. It's giving error:
*<ACTIVE ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <1241533175480> <BEA-387027>*
I am using ALSB for this.
Please help ASAP in the scenerio.
Regards
Gagandeep Singh

Singh,
That's not an error message but simply an informational message that Welogic is tuning parameters to manage load.
You can use the JMS monitor inside WebLogic to monitor your queue and the number of pending messages.
What we have found, is that unless a topic is being fed data, the topic must be connected by the feeder before the subscriber, or the subscriber never receives data (why that is, I'm not sure).
I suggest adding a log entry as the very first thing in your receiving proxy service. Sent data to "error" and just write a test message. You should see that message every time you get a message. This takes out situations where namespace problems returns empty sets and a service doesn't look like it's working. You can also use the dashboard to monitor the receiving service, to verify that a service is being called/run.
Lastly, does your receiving service work when you run it in the debugger with manually entered data? It's been my experience that when I don't get a response, that my proxy service has errors in it.

Error while trying to pick message from weblogic queue

Hi,
We are getting the following error while trying to connect to pick up a message from weblogic queue.
We are suing oracle soa suite 10.1.3.1 and weblogic 8.1
the bad part is that, this error is not documented anywhere and couldn't get much help on this.
Would appreciate any suggestions / pointers on this.
Let me know if any further information is required.
invoke failed
org.collaxa.thirdparty.apache.wsif.WSIFException: file:/E:/product/10.1.3.1/OracleAS_4/bpel/domains/default/tmp/.bpel_OTOCBPELProcess_1.0_78fcf080ec2bd7495aebfb5373e76116.tmp/readmsg.wsdl [ Consume_Message_ptt::Consume_Message(opaque) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
---------------------------------------------------

Hi!
I am facing a similar issue, does someone have an idea ?
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="detail"><detail>null</detail>
</part><part name="summary"><summary>file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_TestReceiveMessage_BPEL_1.0_e00fd88d454889b871183d0d92dc9f7d.tmp/plReceiveMessage.wsdl [ Consume_Message_ptt::Consume_Message(TestPushMessage_BPELProcessRequest) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
Please examine the log file to determine the problem.
</summary>
</part></remoteFault>
Thanks,
romain.

Error while doing picking

Hi Gurus,
I am getting a error while doing picking manually which is as below.
"Batches/valuationclass not completed"
Please tell me the what is the cause.
Thanks and Regards,
Anand.

Hi Anand,
It seems that your batch number field in delivery is greyed out. During goods receipt check whether the batchs are maintained for the material or not. If not maintained maintain the batches for the material. First check the GR.
regards
prasad

Automatic Picking giving error while saving the Delivery

Hi
We have done the configuration for doing automatic picking while saving the delivery.
Steps done are
1. TCode V/38
2. TCode OVLT where we have changed the Time value form 3 to 4 for Send Immediate
3. TCode VP01SHP where all shipping points are maintained.
we are getting the following error while saving the delivery.

Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error". Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
G. Lakshmipathi

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
Thanks

Warehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types.

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: target_date
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
 int l_year;
 int l_month;
 int l_days;
 l_year = target_Date.getYear();
 l_month = target_Date.getMonth();
 l_days = target_Date.getDate();
 Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

Error while processing message to remote system

Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
Raghavendra

Hi,
>>>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha.

Error while calculating the net present value

Dear experts,
Please help me in solving the following error.
I am trying to do project vaibility analysis through pre investment analysis in appropriation request, interm I'm trying to calculate the IRR for the project.
I have created the appropriation request and given all the data in that including the planed values for the project.
In Variants tab of appropriation request, preinv. analysis sub tab, i have clicked the button Calculate preinvestment analysis figures , ( I hvae not mentioned any values in that screen, its picking the plan cost from the planed values of the appropriation request) there I'm getting an error saying
Error while calculating the net present value
If I open the message it is as follows:
Error while calculating the net present value*
*Message no. AO215*
Diagnosis
An error occurred during calculation of the net present value.
The yield curve for determining the net present value is not completely maintained. Possible causes are:
1. Evaluation type IM01 does not exist (table ATSYC).
2. Yield curve types 9990 (bid) and 9991 (ask) have not been created (table JBD14) for the currency of the controlling area of the appropriation request.
3. Reference interest rates have not been created for the yield curves (tables T056R and JBD15).
4. Interest rates are not maintained for the complete planning time period for the reference interest rates.
5. Under certain circumstances, the standard exchange rate types 'G' and 'B' may be inconsistent.
Procedure
Check your Customizing settings:
1. SAP supplies the evaluation types.
Remember, SAP supplies the evaluation types in client 000. You have to copy them into your working clients. If you do not have them in your system, you can create them in Customizing for the Treasury component (Treasury Management -> Market Risk Management -> Evaluations -> Define Default Settings). Create evaluation type IM01 with bid yield curve type 9990 and ask yield curve type 9991.
2. In Customizing for appropriation requests (under Planning), create a bid yield curve type 9990 and an ask yield curve type for the currency of the controlling area of the appropriation request.
3. Create at least one reference interest rate for each yield curve.
4. Maintain the reference rates, starting at the minimum fron the point at which you you have planned costs or revenue.
5. Check Customizing of the exchange rate types 'G' and 'B' in the IMG under Global Settings -> Currencies.
I have checked all the procedures of the said customization and the values are similar to that of the error message, but still I'm unable to proceed further.
I have goe through the note 160375, but did not succeed on this issue.
Can any one help me out in solving the above error and also can any one explain me the process in SAP to calculate IRR?
Is there any more customization missing or whats wrong going in that process?
Please help me out...
Thanks in advance..
Regards,
Praveen.

Are you installing a Demo version of NetWeaver? If so please post your questions and search for answers here: SAP NetWeaver Application Server
If this a real full blown system please contact the OSS, via the Marketplace (service.sap.com) or by OSS transaction in your SAP System.

Error while using UTL_FILE

I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALi

Hello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM

Error while loading shared libraries: libgij.so.7rh

Hi everyone,
I just installed jdk1.6.0_06 on red hat linux 5 server, and try to run a simply java class but have the following error message:
java: error while loading shared libraries: libgij.so.7rh: cannot open shared object file: No such file or directory
I have added the following into /etc/profile
export JAVA_HOME=/usr/java/jdk1.6.0_06
export PATH=$PATH:$JAVA_HOME/bin:$JAVA_HOME/jre/bin
export CLASSPATH=.:$JAVA_HOME/lib:$JAVA_HOME/jre/lib:$CLASSPATH
Can you kindly indicate the cause for this issue? Thanks a lot.
Best,
VovoTsai

You have GNU Java installed by default on many Linux distributions and this is being picked up ahead of the Sun Java. You can change the PATH declaration to make sure that the Sun Java is found first.
export PATH=$JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATHI have removed GNU Java from all my Linux installations.

Error while deploying application on portal domain

Hi All,
I am getting following error while deploying application on portal domain :( :( Not sure what I am missing.......
Anyone has any idea on this???
<Oct 6, 2010 7:49:03 AM EDT> <Warning> <com.bea.wlw.netui.pageflow.internal.WebLogicURLTemplateFactory> <BEA-000000> <In webapp <Workshop Application>, the url template <http://{url:domain}:{url:port}/{url:path}?{url:queryString}{url:currentPage}> uses the {url:port} token. The system may not pick up the correct ports if you are using a proxy server. Consider hardcoding the ports in a production environment.>
<Oct 6, 2010 7:49:05 AM EDT> <Error> <com.bea.p13n.util.jdbc.internal.JdbcSequencer> <BEA-000000> <Cannot allocate sequence block:
java.sql.SQLException: Cannot call commit when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.commit(JTAConnection.java:349)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.allocateSequenceBlockNewTx(JdbcSequencer.java:626)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.getNext(JdbcSequencer.java:456)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionDelegate.createMarkupDefinition(MarkupDefinitionDelegate.java:785)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManagerImpl.createMarkupDefinition(MarkupDefinitionManagerImpl.java:161)
Truncated. see log file for complete stacktrace
>
<Oct 6, 2010 7:49:05 AM EDT> <Error> <netuix> <BEA-423147> <Exception [javax.transaction.TransactionRolledbackException: EJB Exception: : javax.ejb.EJBException: SQL Error while trying to createMarkupDefinition: SQL [insert into PF_MARKUP_DEFINITION ( MARKUP_DEFINITION_ID, MARKUP_NAME, MARKUP_TYPE, WEBAPP_NAME, MARKUP_FILE) values (?,?,?,?,?)] database error code [0] SQL state [null]. Possible markup duplication of [
MarkupDefinition:
webAppName = plassPortalWeb
type = Menu
name = multiLevelMenu
file = /framework/markup/menu/multilevel.menu
beginXml = <netuix:multiLevelMenu $(markupType) $(markupName)>
endXml = </netuix:multiLevelMenu>
MarkupDefinitionId = null].; nested exception is: java.sql.SQLException: Cannot call commit when using distributed transactions
java.sql.SQLException: Cannot call commit when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.commit(JTAConnection.java:349)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.allocateSequenceBlockNewTx(JdbcSequencer.java:626)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.getNext(JdbcSequencer.java:456)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionDelegate.createMarkupDefinition(MarkupDefinitionDelegate.java:785)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManagerImpl.createMarkupDefinition(MarkupDefinitionManagerImpl.java:161)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManager_twpn9c_EOImpl.createMarkupDefinition(MarkupDefinitionManager_twpn9c_EOImpl.java:138)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.onNewFile(MenuFilePersistenceManager.java:160)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.createUpdateMenuDefinitions(MenuFilePersistenceManager.java:267)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.startupSync(MenuFilePersistenceManager.java:529)
at com.bea.netuix.servlets.repository.AbstractFilePersistenceManager$StartupSync.run(AbstractFilePersistenceManager.java:155)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.netuix.servlets.repository.AbstractFilePersistenceManager.startup(AbstractFilePersistenceManager.java:97)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.onNewFiles(MenuFilePersistenceManager.java:228)
at com.bea.netuix.poller.FrameworkPoller.newFiles(FrameworkPoller.java:256)
at com.bea.netuix.poller.NetuixFilePoller.start(NetuixFilePoller.java:172)
at com.bea.netuix.servlets.manager.PortalServlet.reinitInternal(PortalServlet.java:390)
at com.bea.netuix.servlets.manager.PortalServlet.initInternal(PortalServlet.java:261)
at com.bea.netuix.servlets.manager.PortalServlet.access$100(PortalServlet.java:125)

Hello Everybody,
I solved this error by myself as follows:
So, what I did was; I started the RemoteGui.bat (C:\usr\sap\J2E\JC00\SDM\program) and from the Undeployment tab, I selected mainapp01 and com.sap.engine.docs.examples.
The reason I undeployed the above applications was because when I was trying to deploy the mainapp01 application, it gave an error saying that : Cannot deploy application pcbp.com/mainapp01.. Reason: Application alias [/] for application [pcbp.com/mainapp01] already exists in the HTTP Provider Service. The application that holds this alias is [sap.com/com.sap.engine.docs.examples .
And, then I restarted the J2EE engine and from the SAP Netweaver Developer Studio, I again deployed the mainapp01 application on the local J2EE engine and it was deployed successfully.
Oct 10, 2006 9:45:30 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Finished Deployment
Settings
SDM host : RPIKOER
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp9270pcbp.com~mainapp01.ear
Result
=> successfully deployed : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp9270pcbp.com~mainapp01.ear
Thank You
With Regards,
Krunal Rana.

Error while uploading SSRS Reports to SharePoint Report Library

Dear All,
I am having a SSRS Server running in SharePoint integrated mode and I am running reports in SharePoint successfully, but I am facing issue with one site as shown below.
I am getting below error while uploading a report to specific path as shown below;
I can upload to any link but not for the below link shows /departments/ocean
I checked my ReportServer paths from RS Configuration Manager and I cannot find that defined path there. But I can see all other links are registered()
Note: Below shows my web applications in SharePoint farm(four web sites). I have define paths(site collections) only in default web application, not in other webs which has a port number.
I am not sure how the RS Configuration Manager picks thoae Define Manage Path in site collections.
But I think, it should pick department site collections as well.
Could you please guide me how to rectify above error?
ASP.Net, C#.Net, SQL Server ,Win32

Hi,
I recommend to check you can connect to the site collection in Report Builder.
If not, please check if you have permission to access the site collection.
Please also check if the Report Server Integration Feature is activated in the site collection.
To narrow the issue scope, I recommend to create a new site collection using the departments path in SharePoint to see if the issue still occurs.
As a workaround, you can also save the report to local drive and then upload it to SharePoint library using Upload Document button in the ribbon in SharePoint library.
In the meanwhile, you can post your question to the forum for SSRS: http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices.
More experts will assist you, then you will get more information relation to SSRS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while picking

Similar Messages

Maybe you are looking for