Error while posting FB50 transaction code

Hi I am getting the below error while doing FB50 transaction code. Please help me
My company code is using EUR & country is Greece
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.
Thanks
Kishore

Hi
Go to OBBG -->Assign Country to Calculation Procedure and assign the Tax procedure( ie like TAXIN) to the GREECE Country.
This helps you resolve your issue.
Regards
Venkat

Similar Messages

Error while posting tresury transaction

hi gurus,
i got the error , while excuting treasury transaction:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '1000' has currency type '10'. This currency type has the currency key 'SAR' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'EUR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '1000' must have currency key 'EUR' when the data is transmitted.)
Kinldy help to resolve this issue.

Hi All,
I am facing the same issue..Can U pls help me in resolving the error.
ERROR:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '6242' has currency type '10'. This currency type has the currency key 'SGD' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'INR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '6242' must have currency key 'INR' when the data is transmitted.
Regards,
Venkat

Error while posting MB1C transaction

Dear All,
while posting MB1C transaction iam getting following error.
"Error Accessing Function Module;FMFK_FIKRS_READ
Parameter: IP_FIKRS_FMA_OBJNR"
so pls suggest me to resolve it.
thank u.

Dear Siraj,
I have extended the material to warehouse numbers as you suggested. Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER.

Error while posting the transaction in F-02

Dear Friends,
Kindly give me acceptable solution to the below error/ticket while user posting a transaction in F-02.
ERROR: " system error in routine FI_TAX_CHK_PRICING_DATA_ error code 13 function builder TAX2"

Hi,
I agree with alex. In addition to what he mentioned check whether country pricing procedure assignement is done in the path given below-
Financial Accounting (New) > Financial Accounting Global Settings (New) > Tax on Sales/Purchases > Basic Settings > Assign Country to Calculation Procedure
Regards
Milind Sonalkar

Error while posting with Tax code

Dear All,
I am getting the following error while i am trying to post with a tax code. Can someone tell me what could be the issue?
Customization for RIL j_1iindcus missing in table
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Regards
Suresh

Dear Suresh,
If you are using versions below 4.7 execute T_Code J1IT, go to India Localization Menu->Global Settings->Company Settings and add an entry for your Company Code and save.
If you are on higher versions use the following path:
SPRO --> Logistics - General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Company Code Settings.
This should solve the issue.
Kindly let me know if it was useful.
Regards,
Mary Sofia

Error while posting FB50

Hi,
While posting a journal entry as below i am getting error (soft error) "Do not Assign any objects in cost accounting to account 100001"
Acct No   C/D     Amt        Cost Center
100001   credit   100.11 ;    5000001 (balance sheet account)
700499   debit    100.11 ;    5000001 (P&L account)
However this posting will work if i post both debit and credit in P&L accounts.
Kindly advice and oblige.
Thanks,

Hi,
It seems prima facie that you have assigned cost object for the account 100001 which is a balance sheet account. Remove that and then try to post.
Warm Regards

Error while posting MIRO Transaction - FS215

Dear Forum,
The users are trying to post the MIRO entry selecting the Tax Code PO, which is with zero percentage. However, even though the debit and credit balance out, the system gives the error message, "Only output tax is allowed for account GL XXXXXX. This is the GL Account for Output Tax. It is not understood why the system is giving this error message, when the tax percentage chosen is zero and the Tax Code chosen is that for Input Tax. Is there an issue with the config? What do we need to check to resolve this?
Your help will be highly appreciated. Thanks!
Regards

Hi Friends,
As suggested by Onemartin and Ajay, I have checked the Account Determination and find that the GL mapped is the one meant for the Input Tax. But why is the system referring to the GL for Output Tax, it is still not clear. The solution by Ajay appears to be ok, but the question is why is the system referring to the GL Code of Output Tax, MIRO, being done for Invoice Verification cannot be subjected to the Output Tax.
Help from freinds would really be appreciated as we need to understand this peculiar behavior of the system.
Regards

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

ErroR while posting J1IH (TR6)

Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
    to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS                            Dr 2000
SECS                          Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil Kumar

The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error while posting parked documents

HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error while posting vendor invoice in F-43

Hi experts,
while posting vendor invoice with Tax code , i am getting the following error:
Posting is only possible with a zero balance; correct document
Message no. F5060
Here tax line item is not yet all displaying in simulation.
If I posted with tax code with ZERO percentage it is posting correctly.
where as same transaction I am able to post through transaction code FB60.
What could be the reason?
regs,
ramesh b

Hi
Please check and correct the respective line items , because your selecting incorrect GL account with respective posting keys
Example : You have exp gl a/c at first line items against vendor invoice posting's, normaly this vendor will post in first line item with posting key is 31 with vendor a/c and second line item 40 with exp GL a/c and same you will check any required inputs have missed out from this transactions.
Regards
CHOWDARY

Error while posting the CREMAS03 Idoc

Hi
I a getting the Error while posting CREMAS03 idoc from File
The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
but when i cheked with the functional guys , the comany code exits..
Any one have any idea
SV

Hey,
    seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.

Error while posting FPSEC1

Hi everyone,
Please guide me how to correct the following error:
While posting SD Request through transaction code: FPSEC1, we are facing an error message, 'document is transferred without Main and Sub transaction'.
Please guide.
Thanks and Regards

Hi Prudhvi,
Please check whether the main and sub transactions for which you have defined the account assignments are assigned correctly with the internal main and sub transaction.
And for the error 2, please maintain the reconciliation group id for your user id in the IMG path>Financial Accounting>Contract Accounts Receivable and Payable>Basic Functions>Postings and Documents>Document>Define Default Values>Maintain Rules for Reconciliation Key Default Values>Maintain Reconciliation Groups for Default Values.
You should define the reconciliation key group for the user id because posting the security deposit requires a reconciliation key to post the statistical security deposit request in FICA. The reconciliation key is generated automatically using the reconciliation key group assigned for the user id. You will not be able to edit the reconciliation key from FPSEC1.
Thanks,
Sakthi.

Error while posting FB50 transaction code

Similar Messages

Maybe you are looking for