Error while reading Infoset data

Hi,
I have installed the BI 7.0 content for E-recruiting. I have activated
the infosets 0ERC_IS01, 0ERC_IS02, 0ERC_IS03, 0ERC_IS04. All the
corresponding underlying objects are active and loaded. When I try to
display the data for IS02, 03, 04, I get the below error.::
1. SQL0104N An unexpected token """" was found
following ""T00003"."OBJVERS" =". Expected tokens may
include: "<space>". SQLSTATE=42601
2. Error when generating the SQL statement
3. Error reading the data of InfoProvider 0ERC_IS02.
I am able to display the data for IS01 without any problem. I am on SAPKW70017.
Kindly suggest how to proceed further.
Regards,
Adarsha A

Hi,
Yes I have check all the underlaying objects are active and loaded.
IS01 is made of ODS - 0ERC_DS01 and Info object 0REQUI. ODS is time independent and Info object is time dependent. This combination is working very fine.
Now IS02 is made of info objects - 0CDCY, 0CANDIDATE, 0REQUI. All these objects are time dependent. Will time dependent objects require some other setting? how these are BIcontent objects.
Another observation is that if I create infosets combining ODS - 0ERC_DS01and any one info object of IS02, it is working fine. But ODS with more than one info object is not working.
Kindly suggest.
Regards,
Adarsha A

Similar Messages

Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PM

Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

Message failing in SXMB_moni----Error while reading from the secure store

Hi,
The scenario is as below
A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
The message is failing in sxmb_moni while trying to write the file in the folder.
The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
Below is the error seen in moni.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
Below is Trace log:
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace>
<Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry changed: / (SECSTORE,031) </Trace>
<Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine </Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
Is this because PI system is a system copy of another system ?
Regards,
Sneha

Error while reading access data (URL, user, password) for the Adapter Engine
Check out Michal's reply:
Re: URL for Central Adapter Engine
As you said there was a system copy it may be the case that some things were not configured properly

MSS 60.1.19 - Salary Development iView - Internal error wh reading the data

Hi guys!
I face the problem of an iView Salary Development. I get error: Internal error while reading the data. I found a thread with the same problem, but there is no solution. Did anyone of you solve this problem?
Thanx for answers!
Peter

HI Peter
I have the ivew salary development wroking more or less. There are some problems with totals from wage types including IT14 & 15 which I have reported and waitnig for response frmo SAP..... but at least IT0008 is working ok on it.
I didn't get this message so let me know how to help...! Ha<ve you done the config for the iview yet?
helen

Error while reading data through External Table!!!

CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
AP

Let's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin

Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12

Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.

Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind

Raw Read Error Rate, Errors occurred while reading raw data from a disk

hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
Mohammad

Hello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Error occured while reading identity data: failed to decrypt safe contents

Hello,
We are trying to access Tibco JMS server through SSL using JNDI lookup. Getting the following error, while executing a sample java file.
Java Version -
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Please let me know if any of you faced similar issues.
thanks in advace.
Following are the error messages.
javax.jms.JMSSecurityException: Error occured while reading identity data: failed to de
crypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid
pad byte. at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2699)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
##### Linked Exception:
com.tibco.security.AXSecurityException: failed to decrypt safe contents entryCOM.rsa.js
afe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:70)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source) at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source)
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more

For the benifit of others.
The issue is resolved.
When we set the certificate password inside our application we were encrypting it inside our system.
When we sent it to tibco we did not decrypt it.
So the encrypted password was sent as it is that was the issue :(
Thanks,
Reflex.

Error while reading data for reporting

Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
Sandy

Hi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name   : server0
pid         : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Getting an error while viewing a data in owb

Hi,
I created an External table based on a flat file. But I am not able to view the data in the external table while the flat file has the data.
I am using this external table as a source in my mapping but no data is getting loaded even after the successful execution of the mapping.I am getting the following error while viewing the data
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04040: file ATLAS in ATLAS_LOCATION1 not found
Please help me regarding this. I am new to the owb 11g.

Thanks for you reply. Still I can't view the data. Actually what i did is imported a .csv file using files then created a external table configured , validated and deployed.In next step created a mapping with this excel this using table operator validated and genrated code. In next step using the control center manager i deployed it. But i can't view the data still in the external table.
Is this procedure is correct for loading the excel sheet in to databse. My client environment is on windows xp and database is on linux environment.
Please help me regarding this.I am new to owb.

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while reading Infoset data

Similar Messages

Maybe you are looking for