Error while registering CCMS Agent !!!!

Hey,
I was trying to configure the SAPCCMSR agent in the development PORTAL which is a JAVA (Non ABAP)  stack through "J2ee Visual Administrator".
I am getting the following error:
1 ) ERROR: DSR: Dynamic Library dsrlib.o is Non-Unicode.     
  Cannot load this library
2) ERROR: Cannot open Monitoring Segment 0 rtc = 245
3) Error during registration of CCMS Customizing destination   
User not authorized. Session terminated
Please guide me on this.
Regards,
Ashish .A. Poojary
Edited by: Ashish Poojary on Nov 6, 2008 11:20 AM

Hi Ashish,
refer this link.
http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/frameset.htm
Re: CCMS agent registration on central system
Regards
Supraja

Similar Messages

  • Error while registering CCMC Agent

    Dear Guru's,
    We're facing some issue while registering the CCMS Agent in the satellite system.
    We are in phase of installing & registering the CCMS Agent with CEN, while registering in the satellite system (Dual stack system) with this command, sapccmsr.exe -R its throwing an error message :
    ERROR: RFC error during logon: 102 RFC_ERROR_COMMUNICATION [Connect to message server failed
    Connect_PM MSHOST=kaar-server15, R3NAME=EBP, GROUP=TRACE=0
    CCMS version
    20040229, 64 bit, multithreaded, Unicode
    Also we're not getting information of Java stack in CEN system.
    Kindly suggest me a solution for this.
    regards,
    Guna

    Hi,
    Thanks for your reply.
    As per your information, we checked the firewall settings it doesn't block anything and also register again. Same issue.
    CEN system - Only ABAP Stack - ECC 6.0 Ehp3
    Target System - Double stack (ABAP + JAVA, Netweaver 2004s)
    After completing the Visual Admin settings. Service file SAPCCMSR.99 has
    been generated automatically. As per the help.sap the service file should
    be SAPCCMSR.<Instance No.>, our instance no. was 00 but its was generated
    with 99 (SAPCCMSR.99).
    Two RFC has been created in Double stack system and one RFC has been
    created in ABAP system.
    RFC in ABAP system :
    SAPCCMSR.HOSTNAME.00 - its not working
    (Error Details, ERROR:program hostname.sapccmsr.00 not registered)
    RFC in Dual-stack System :
    SAP.CCMS.J2EE.SID - its working
    SAPCCMSR.HOSTNAME.00 - its not working
    (Error Details, ERROR:program hostname.sapccmsr.00 not registered)
    While testing the Remote System Topology, we're getting communication
    error.
    In RZ21, Topology - Agents for Remote Systems - Display Overview, Agent
    for SAP System SID tab, Agents for Remote SAP Systems, selecting the
    available system (Dual stack system) and give Test Connection means
    its throwing Error opening an RFC connection - SAPCCMSR.HOSTNAME.00
    Could you please suggest, what we're missing.
    regards,
    Guna

  • Error while configuring CCMS Agent

    Hello Gurus,
    I am trying to install CCMS agent on our BI Dev system, but it gives me below error.
    Error Message -
    ERROR: Cannot open Monitoring Segment 0 rtc = 245
    Last reported error: [249]  CCMS monitoring segment has wrong EYE CATCH: CCMS mo
    nitoring segment belongs to a non-ABAP instance.
    SAPCCM4X of release 7.00 is to be used only to monitor ABAP instances of kernel
    release 7.00 (NW04s) or 6.40.
    EXITING with code 1
    Error Message -
    I am trying to run the command S:\usr\sap\SID\SYS\exe\uc\NTAMD64>sapccm4x.exe -R pf=S:\usr\sap\SID\SYS\profile\profile_name
    I have downloaded the file as discribed on the help.sap.com link
    http://help.sap.com/saphelp_nw70/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
    I have configured CCMS Agent on our ERP Dev system, but on BI/BW I am getting this error.
    Could you guys please help me on this.
    Best Regards,
    Amit Vaij

    Perhaps your BI system is dual stack, or even java only?
    In that case you should install the sapccmsr agent (as well).
    Regards,
    David

  • Error when registering CCMS agent SAPCCMSR on ECC 6.0 ABAP only system

    I need to start the agent sapccmsr on SAP ECC 6.0 system to monitor ABAP proxies for separate MDM system. 
    I already have the sapccm4x agent running.
    When I try to register using:
    CALL PGM(<kernel_lib>/sapccmSr)  PARM('-r' '-f' '/usr/sap/<sid>/<inst>/log/sapccmsr/csmconf' 'pf=/usr/sap/<sid>/SYS/profile/<inst_host>')         
    I get the error message:
    ERROR: cannot open Config
    File /usr/sap/D12/DVEBMGS12/log/sapccmsr/csmconf fo
    r registration 
    I cannot see any issue with authorizations. I have modified the csmconf file with the appropriate passwords. The sapccmsr.install.logs are empty.
    Has anyone run into this issue? Can I start the agent on an ABAP only system?  If so has anyone done this successfully & have the cmd to do so?
    There is probably a very simple solution to this but I just have not been able to find it!
    Any information would be greatly appreciated.
    Regards,
    Diane Szmurlo

    Hello Nish,
    Have you done SGEN already?
    Anyways first try this out Check through SE11 if the  tables exist in the new client. For example check for A001. If it shows up there try to activate the table and see if you get any errors. Let us know the results.
    Regards.
    Ruchit.

  • OLE initialization or OCX load error while registering OCX

    Installing database 10.1.0.2 enterprise on windows XP pro SP2:
    When the installer gets to: "Setting up 'Oracle Remote Configuration Agent 10.1.0.2.0' I am getting the error:
    "OLE initialization or OCX load error while registering OCX".
    Please, help, I have no clue!
    Kind regards,
    Morten Steffensen

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Oracle Discussion Forums » Application Development in PL/SQL » SQL Developer (Not for general SQL/PLSQL questions) which is dedicated forum site.
    Regard
    Helios

  • "Error while registering the Java 2 Runtime Environment registry keys"

    "Error while registering the Java 2 Runtime Environment registry keys"
    I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
    Thanks for your help
    Aaron

    I am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
    I have multiple versions of jre's and jdks on my machine.
    Anyone else seen this problem or know how to resolve it.

  • Error while registering SOA Composite

    Hi all
    I used OOTB AutoApproval composite and added mail stuff to that composite. And run the composite and deployed it successfully. I don't want approver, task should be auto-approved. But for other custom composite i deployed and registered the composite. But for this i cann't.
    can any one help on this.
    But i am not able to register it. I am getting below error while registering
    Exception in thread "Main Thread" oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
    [java] at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
    [java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    [java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_1035_WLStub.registerWorkFlowDefinitionx(Unknown Source)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java] at java.lang.reflect.Method.invoke(Method.java:597)
    [java] at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    [java] at $Proxy2.registerWorkFlowDefinitionx(Unknown Source)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceDelegate.registerWorkFlowDefinition(Unknown Source)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java] at java.lang.reflect.Method.invoke(Method.java:597)
    [java] at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
    [java] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    [java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    [java] at weblogic.security.Security.runAs(Security.java:41)
    [java] at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
    [java] at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
    [java] at $Proxy3.registerWorkFlowDefinition(Unknown Source)
    [java] at oracle.iam.platformservice.workflowregclient.WorkflowRegistration.main(WorkflowRegistration.java:42)
    [java] Caused by: oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
    [java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.mapWorkflow(WorkflowRepositoryImpl.java:132)
    [java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.registerWorkFlowDefinition(WorkflowRepositoryImpl.java:113)
    [java] at oracle.iam.platform.workflowservice.impl.WorkflowServiceImpl.registerWorkFlowDefinition(WorkflowServiceImpl.java:230)
    [java] at oracle.iam.platformservice.impl.WorkflowRegistrationServiceImpl.registerWorkFlowDefinition(WorkflowRegistrationServiceImpl.java:38)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB.registerWorkFlowDefinitionx(Unknown Source)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java] at java.lang.reflect.Method.invoke(Method.java:597)
    [java] at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
    [java] at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    [java] at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    [java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    [java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    [java] at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    [java] at $Proxy507.registerWorkFlowDefinitionx(Unknown Source)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.__WL_invoke(Unknown Source)
    [java] at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.registerWorkFlowDefinitionx(Unknown Source)
    [java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_WLSkel.invoke(Unknown Source)
    [java] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
    [java] at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
    [java] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:523)
    [java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    [java] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    [java] at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:119)
    [java] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    [java] at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    BUILD FAILED

    First of all you have modifed OOTB approval flow, why you are not going for custom approval flow with skip rule.
    Now
    Are you able to compile the workflow?
    before going to re - register follow proper steps.
    Also check the below link
    Metalink ID 1221305.1
    Custom Auto Approval flowflow in OIM
    Thanks,
    Kuldeep

  • Error while registering Oracle JDBC Diagnosability MBean

    Hi All,
    I get the following error (pasted at the end)when trying to use the OracleDriver class to create connections.
    I am using JDeveloper11g-11.1.1.2.0, and
    JDeveloper11g-11.1.1.2.0/wlserver_10.3/server/ext/jdbc/oracle/11g/ojdbc6.jar.
    I read other posts with similar errors; the recommendation was to update the jar to the latest patch. But that still does not seem to work.
    Any help/pointers appreciated.
    Thanks
    Meera
    ------------ Error trace ----------------------------------------------------
    SEVERE: Error while registering Oracle JDBC Diagnosability MBean.
    java.security.AccessControlException: access denied (javax.management.MBeanTrustPermission register)
         at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
         at java.lang.SecurityManager.checkPermission(SecurityManager.java:568)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.checkMBeanTrustPermission(DefaultMBeanServerInterceptor.java:1824)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:310)
         at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
         at oracle.jdbc.driver.OracleDriver.registerMBeans(OracleDriver.java:345)
         at oracle.jdbc.driver.OracleDriver$1.run(OracleDriver.java:197)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.jdbc.driver.OracleDriver.<clinit>(OracleDriver.java:193)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:169)
         at oracle.communications.brm.pdc.server.transfomation.CrossReferenceDBConnectionObj.initializeConnection(Unknown Source)
         at oracle.communications.brm.pdc.server.transfomation.CrossReferenceHandler.<init>(Unknown Source)
         at oracle.communications.brm.pdc.server.transfomation.RRE_TransformationEngine.createWorkItemProcessors(Unknown Source)
         at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testCreateWorkItemProcessors(Unknown Source)
         at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testMain(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
         at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
         at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
         at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:20)
         at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
         at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
         at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:73)
         at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:46)
         at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
         at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
         at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
         at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
         at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
         at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
         at org.junit.runners.Suite.runChild(Suite.java:115)
         at org.junit.runners.Suite.runChild(Suite.java:23)
         at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
         at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
         at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
         at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
         at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
         at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
         at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39)
         at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:421)
         at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:912)
         at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:766)

    Hi,
    did you enable the permission at the jvm level?
    its' done by adding the following lines to your java.policy file under <JRE_HOME>/lib/security
    grant {
    // JMX Java Management eXtensions
    permission javax.management.MBeanTrustPermission "register";
    ciao,
    Giovanni
    P.S. This solution was taken from http://forums.sun.com/thread.jspa?threadID=491124

  • Error while registering Oracle JDBC Diagnosability MBean - version 1.2.1

    Hi,
    I am running version 1.2.1 of SQL Developer (build MAIN-32.13). I have a local copy of Oracle 11g running on Windows XP. I am running version 1.6.0_03 of java.
    When I fire it up, I get the following message in the "logging page - log" pane:
    Source: oracle.jdbc.driver.OracleDriver
    Message: Error while registering Oracle JDBC Diagnosability MBean.
    Is this something I should worry about?
    Graham

    I got the same thing using SQLDeveloper shipped with 11g. It is every annoying since sqlplusw.exe is not available anymore, neither iSQLPLUS or SQLPLUS.exe is good enough all of the sudden that I found not much choice of accessing the database on windows ...

  • Error while registering for index relevant events: Invalid RID: No reposito

    Hi,
        I created an index and assigned a datasource to search the Windows network drive. I activated the index and now when I am  monitoring the application log, I see the error <b>Error while registering for index relevant events: Invalid RID: No repository manager found for prefix: and XIndexing documents failed. AbstractTrexIndex: indexing some of the resources failed Continue crawling and Indexing document failed. Access denied </b> for the <b>IndexmanagementService</b>.
    When I see the queue status, the queue status is always idle, even after I activate the queue.
    In the indexing monitor, I see the error <b>Trex: Preparation failed: index operation</b>
    could anyone tell me what could be wrong?
    Thanks,

    Hi Christian,
    thanks for your reply.
    we are using 7.2 SP02. Do you think it could be the version that has some issues with custom mapping functions?
    regards
    Yao

  • Error code -22: Error while registering

    Hi Guys.
    I'm new to NW Mobile 7.1.
    I'm able to run developed applications and see data on physical devices (PDAs).
    I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
    My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
    When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
    After a sync, the folowing messages appear on my console:
    Windows XP
    messageReceived in ContainerSyncEventListener: Connected to the server   Level: 1
    messageReceived in ContainerSyncEventListener: Sending logon data to server   Level: 1
    messageReceived in ContainerSyncEventListener: Waiting for response from server   Level: 1
    messageReceived in ContainerSyncEventListener: Receiving data from server   Level: 1
    messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
    I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
    I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
    In just a few words, it is driving me nuts.
    Thank you in advance,
    David.

    Hi,
    if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
    In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
    To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
    If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
    Hope this helps!
    Regards,
    Oliver

  • Error while Registering the Database with Catalog..

    I m creating recovery catalog in same database, and getting the errors.
    1. I have created TOOLS tablespace
    2.CREATE USER RMAN2
    SQL> CREATE USER rman IDENTIFIED BY cat
    2 TEMPORARY TABLESPACE temp
    3 DEFAULT TABLESPACE tools
    4 QUOTA UNLIMITED ON tools;
    CREATE USER rman IDENTIFIED BY cat
    ERROR at line 1:
    ORA-01920: user name 'RMAN' conflicts with another user or role name
    SQL> ed
    Wrote file afiedt.buf
    1 CREATE USER rman2 IDENTIFIED BY cat
    2 TEMPORARY TABLESPACE temp
    3 DEFAULT TABLESPACE tools
    4* QUOTA UNLIMITED ON tools
    SQL> /
    User created.
    3. GRANT RECOVERY_CATALOG_OWNER
    SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
    Grant succeeded.
    4. To create the recovery catalog:
    1. Connect to the database that will contain the catalog as the catalog owner.
    H:\>rman catalog rman2/cat@rock
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to recovery catalog database
    2. Run the CREATE CATALOG command to create the catalog.
    RMAN> CREATE CATALOG;
    recovery catalog created
    3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
    H:\>sqlplus
    SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter user-name: rman2/cat
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select count(*) from cat;
    COUNT(*)
    91
    SQL> ed
    Wrote file afiedt.buf
    1 select owner, table_name, tablespace_name
    2 from dba_tables
    3* where table_name='DB'
    SQL> /
    OWNER TABLE_NAME
    TABLESPACE_NAME
    RMAN2 DB
    TOOLS
    RMAN DB
    ABAMCO_TEST
    Next step is to registering the Database in the Recovery Catalog.
    Registering a Database in the Recovery Catalog
    H:\>rman TARGET / CATALOG rman2/cat@rock
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04005: error from target database:
    ORA-01031: insufficient privileges
    I m getting above error while registering the Database with Catalog,
    Can anybody help me how can I register the Database with Catalog.????
    Waiting for Reply!!!!!!!

    Dear Manoj I can log in at TARGET Database.
    H:\>rman
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN> connect target sys/rock
    connected to target database: ROCK (DBID=3255117147)
    RMAN>
    ============================================================
    USING CONNECT STRING as you said.
    H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
    Argument Value Description
    target quoted-string connect-string for target database
    catalog quoted-string connect-string for recovery catalog
    nocatalog none if specified, then no recovery catalog
    cmdfile quoted-string name of input command file
    log quoted-string name of output message log file
    trace quoted-string name of output debugging message log file
    append none if specified, log is opened in append mode
    debug optional-args activate debugging
    msgno none show RMAN-nnnn prefix for all messages
    send quoted-string send a command to the media manager
    pipe string building block for pipe names
    timeout integer number of seconds to wait for pipe input
    checksyntax none check the command file for syntax errors
    Both single and double quotes (' or ") are accepted for a quoted-string.
    Quotes are not required unless the string contains embedded white-space.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00552: syntax error in command line arguments
    RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
    RMAN-01007: at line 0 column 16 file: command line arguments
    H:\>rman
    It didnt work either.
    I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

  • Error while registering the Concurrent Program

    Hi,
    I am getting the following error while registering the concurrent program.
    The executable is registered as shell script and this executable sends a mail with attachment. can any one of you tell me the cause of the error?
    ORA-20160: ORACLE error -4091 in SUBMIT: others
    Cause: SUBMIT: others failed due to ORA-04091: table APPLSYS.FND_CONCURRENT_PROGRAMS is mutating, trigger/function may not see it.
    The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
    ORA-06512: at "APPS.ALR_FND_CONCURRENT_PROGRAM_IAR", line 1
    ORA-04088: error during execution of trigger 'APPS.ALR_FND_CONCURRENT_PROGRAM_IAR'
    ORA-06512: at "APPS.FND_CONCURRENT_PROGRAMS_PKG", line 63
    FRM-40735: ON-INSERT trigger raised unhandled exception ORA-20160.
    Thanks in advance

    Check Note: 391795.1 - Frm-40735: On-Insert Trigger Raised Unhandled Exception Ora-04062 in APPS.FND_CONCURRENT_PROGRAMS_PKG
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391795.1

  • Error while registering Oracle JDBC Diagnosability Mbeans?

    Hi,
    I have installed Oracle 11g 11.1.0.6.0. I am facing problem while executing any command in sql Developer. Below the frame an error message is shown : Error while registering Oracle JDBC Diagnosability Mbeans? and while executing any query like 'select user from dual' error is generated saying connection in busy. I have made connection with system user.so, how to resolve this problem?
    Thanks

    There are a lot of information in listener.log file , some information i am posting .
    Each time i am opening Oracle SQL Developer programme, a error is generated , saying " oracle.jdbc.driver.OracleDriver     Error while registering Oracle JDBC Diagnosability MBean.".
    Though i can create a new connection and query database tables. But why this error message is generated each time i open Oracle SQL Developer?
    06-MAR-2010 20:02:19 * service_update * earth1 * 0
    Sat Mar 06 20:03:10 2010
    06-MAR-2010 20:03:10 * service_update * earth1 * 0
    06-MAR-2010 20:03:19 * service_update * earth1 * 0
    Sat Mar 06 20:03:43 2010
    06-MAR-2010 20:03:43 * service_update * earth1 * 0
    Sat Mar 06 20:04:16 2010
    06-MAR-2010 20:04:16 * service_update * earth1 * 0
    06-MAR-2010 20:04:17 * (CONNECT_DATA=(SID=EARTH1)(CID=(PROGRAM=F:\app\shyam\product\11.1.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe)(HOST=SHYAM-E23629982)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1360)) * establish * EARTH1 * 0
    06-MAR-2010 20:04:19 * service_update * earth1 * 0

  • Error while Registering

    Hi All,
    When I am trying to sync my Mobile Client to the Middleware, I am getting this error:
    ERROR: Error occured on server: "Error while Registering"; error Code 22
    ERROR: Error occured on server: "Error while Registering"; error Code 22
    <b>Syncronization Successful</b>
    Can anybody suggest me why this is happening?
    Ankur

    Hi Ankur
       Are you by any chance using Mobile 7.1 client? In that case this error occurs when you havent registered the client device before synchronizing.  Registeration should be done in the Web Dynpro Portal available in the server and once you have successfully registered the device, sync from the client.  This might solve the issue.
    Best Regards
    Sivakumar.

Maybe you are looking for