Error while resetting the PO release using the FM BAPI_PO_RESET_RELEASE

Hi Friends,
My requirement is to Reset the Purchase Order release.
I am using FM BAPI_PO_RESET_RELEASE, and i am getting the Exception PREREQUISITE_FAIL(Release Prerequisite Not Satisfied) after executing this Function module.
I found that For PO which is already issued an output/already printed, we can not reset the release. and for the PO which does n't have any output status records, this FM is working fine, but for the PO which has the output status records, i am getting the mentioned exception.
I have tried by executing this FM(BAPI_PO_RESET_RELEASE) after deleting all output status records for one PO , i got the successful result. But if there are any output status records for the PO this FM is given the Exception.
Can anybody tell me how to reset the release strategy for the PO which has already printed or which has some output status records(Without deleting the output status records).
Thanks:
Rk.

Dear RK,
Did you resolved the above issue, I am facing the similar problem.
Please let me know the solution.
Thanks,
Dhaneshwari

Similar Messages

Error while resetting the delta in ODS (BI 7.0)

Hi all,
I face a problem in delta resetting...need your help... Thanks..
I have an ODS-1 which has target cube1, cube2, cube3....One week back a new target has been added as ODS-2....All complete data from ODS1 has been piped into ODS 2..(Note.. ODS2 has many more inputs from other cubes/ODS too)
NO issues till now....
I found a data problem in ODS-1 which got loaded 15 days back..... I have removed all 15 requests from cube1, cube2 and cube3... Now I am trying to reset the delta in ODS1...
I am getting the following error....Infoprovide ODS2 still contains request... Delete this first....
Since ODS2 has many other data alongwith ODS1... If I try deleting request from ODS2,, I need to clean it totally and redo... I dont want to do this...
Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
Let me know your suggestions.... Thanks!
Regards
Ayyappan.V

Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
I dont think you can disconnect the link. just delete the requests originating from ODS1 in ODS2 and you can leave all other requests intact that are from other dataproviders and do a reinit.

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

Error while starting the managed server using nodemanager

HI ,
I am getting the below error while starting the managed server from the Admin console. All the serverstart and the node manager proeprties looks fine.
Below is the error in the managed server log,
startWebLogic.sh: grep: not found
startWebLogic.sh: uname: not found
startWebLogic.sh: test: argument expected
can you help me to solve the problem please. i am using weblogic 10.3.3
thanks
Arun

I think you've changed and added some lines into your startWebLogic.sh script. Can you put your script here?

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!

Error while starting the OA using opmnctl

HI,
Am a Beginner on OAS.Am facing a error while starting the application using ./opmnctl startall.
opmnctl: starting opmn and all managed processes...
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
Failed to get IP for localhost (1)
opmnctl: opmn start failed
Not able to select the components using console.
Can you help me to resolve
Edited by: Tarunkudikala on Feb 26, 2009 3:25 AM

Why not better put that info ???
If you are installing Oracle Application Server in a DHCP network you must use a loopback configuration. To access the Oracle Application Server, you need to use a local browser. Perform the following steps to install Oracle Application Server in a DHCP network:
1.
Find the IP address allocated from the DHCP server by running the following command:
$ /sbin/ifconfig -a
The IP address is associated with the interface configured to use DHCP.
2.
Configure the host to resolve hostname to loopback IP address:
1.
Configure the host to resolve hostname to loopback IP address, by modifying the /etc/hosts file to contain the following entries:
127.0.0.1 hostname.domainname hostname
127.0.0.1 localhost.localdomain localhost
2.
Check that the hostname resolves to the loopback IP address by entering the following command:
$ /bin/ping hostname.domainname
----------------------

Error while resetting release of segment

Hi Experts,
We have one custom IDoc.I am trying to add new field to one of the segment.So i am trying to cancel release status of segment using we31.But i am getting error Error while resetting release of segment ZXXXXX Message no. EA259 .I checked many of SDN threads but no where exact solution is mentioned for this.Current release for the message type is 701.so we are on same version now also.I put a break-point in LEDIJF05 in form CHANGE_CLOSE_SEGDEF.i observed it is failing at line 625 and
can not unclose segment: release of last version is not SAP-version*.Can any body tell me what is the exact issue.
Thanks in advance,
Vijay

Hi Vijay,
If the SAP version and the version segment released last time is the same, then this problem should not occur. If you are still facing the issue, add a version to the existing segment. You should be able to add the new field then.
Regards,
Parthiban

Error while opening the report.

hi,
Some time i am getting "500 Internal Server Error',while executing the report.Please check the following exception and give the possible reason for getting this kind of problem.
 500 Internal Server Error
BEx Web Application
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Error in BW:
System Environment
Server
BI Java Release: 7 - Patch level: 0000000009 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0009 - Description: SAP NetWeaver BI 7.0 (BIPCLNT300) - Additional info: - Production mode: true
Java Virtual Machine Classic VM - IBM Corporation - 1.4.2
Operating System AIX - ppc64 - 5.3
Context
ACCESSIBLE false
BEx Runtime Version 1
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
Initial Query String BUILDTREE=false&NAVIGATIONTARGET=navurl%3A%2F%2F7b8b73fe5fd57ae6c5c1a24aed5d1ac4&NAVPATHUPDATE=false&RELATIVENAVBASE=&SAP-LAFVERSIONS=portal%3A7.0.9.0.1%3Bur%3A7.0.9.0.1&SAP-PP-CONSUMERBASEURL=3A80&SAP-PP-PRODUCERID=com.lenovo.BIP_Lenovosap&TEMPLATE=Z_WEB_CR_ZCRMOPPI_Q0032&THEME=LenovoBlueTwo
LANGUAGE en
Master System Alias BIPCLNT300
PROFILING false
RTL false
Request URL http
SAP_BW_IVIEW_ID pcd:portal_content/d029033/com..BI_Reports/com.BI_Analytics/Z_WEB_CR_ZCRMOPPI_Q0032
SAP_EXTERNAL_SID CLGF6EORaEN7Vivt8TVaQw==3eTBxzbQZSMLxB4o3h9+7w==
THEME_NAME LenovoBlueTwo
TRACE false
TRAY_TYPE PLAIN
Time Thu Oct 04 03:14:20 PDT 2007
User EPSUPPORT (USER.R3_DATASOURCE.EPSUPPORT)
Full Exception Chain
Log ID 00145ED13086005200000889000C719A00043BA80CB04B89
com.sap.ip.bi.webapplications.runtime.controller.MessageException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2055) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:841) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:775) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:412) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java(Compiled Code)) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:93) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:81) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:118) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:105) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:232) at com.sap.ip.bi.webapplications.runtime.base.Container.init(Container.java:46) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:3226) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:3427) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:4355) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:4091) at sun.reflect.GeneratedMethodAccessor293.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:410) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:325) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:144) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1418) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:1713) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2424) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:1977) ... 38 moreCaused by: com.sap.ip.bi.deploytime.BIBaseRareSystemException: BI runtime subsystem error: Retrieve MetadataResources Failed1.4.2com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache:initialize Note call hierarchy at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:212) at com.sap.ip.bi.deploytime.BISP2Jsp.transformDTT(BISP2Jsp.java:1130) at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:497) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:88) ... 59 moreCaused by: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:221) at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:171) at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java(Compiled Code)) at com.sap.ip.bi.deploytime.service.validation_metadata.impl.ValidationMetadataService.getTransformData(ValidationMetadataService.java:53) at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:196) ... 62 more
Regards,
Ravi.M

hi,
 Any suggestion for the above query.
here i am using federated portal concept,once i am opening this report in the portal only i am facing the above problem.
Regards,
Ravi.M

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Datamover error while creating the peopletools system database

i am using
os=suse linux 12.2
database = db2 9.72
peopletools = 8.53
i am getting the following error while running the datamover script for the peopletools system databse. i have attached the following error for your view plz help me........
db2inst1@linux2:~/PT853/bin> ./psdmtx -CT DB2UNIX -CD SL290101 -FP /home/db2inst1/PT853/scripts/sl290101dbx.dms
PeopleTools 8.53 - Data Mover
Copyright (c) 2013 PeopleSoft, Inc.
All Rights Reserved
Started: Tue Feb 26 13:12:25 2013
Data Mover Release: 8.53
Database: SL290101 (ENG)
Input file: /home/db2inst1/PT853/data/ptengs.db (ENG)
Commit done at end of record
Importing ACCESS_GRP_LANG
Import ACCESS_GRP_LANG 0
SQL Error. Error Position: 0 Return: -2300 - End of fetch (SQLSTATE PS001)
RUN STATISTICS FOR TABLE (PS_ACCESS_GRP_LANG,LOW)
Error: SQL execute error for %UpdateStats(PS_ACCESS_GRP_LANG)
Error: Import Record name ACCESS_GRP_LANG
Ended: Tue Feb 26 13:12:30 2013
Unsuccessful completion

thanks for reply anygma,
datamover script created the PS_ACCESS_GRP_LANG table in an back end so i think no need to create that record in an application designer....
And also i edit that datamover script as set start after ACCESS_GRP_LANG now its again return the same error for the next table but in back end the table are created.......
db2inst1@linux2:~/PT853/bin> ./psdmtx -CT DB2UNIX -CD SL290101 -FP /home/db2inst1/PT853/scripts/sl290101dbx.dms
PeopleTools 8.53 - Data Mover
Copyright (c) 2013 PeopleSoft, Inc.
All Rights Reserved
Started: Wed Feb 27 03:17:03 2013
Data Mover Release: 8.53
Database: SL290101 (ENG)
Input file: /home/db2inst1/PT853/data/ptengs.db (ENG)
Commit done at end of record
Searching ACCESS_GRP_LANG ... please wait
Found ACCESS_GRP_TBL
Restart record ACCESS_GRP_TBL
Importing ACCESS_GRP_TBL
Creating Table ACCESS_GRP_TBL
Import ACCESS_GRP_TBL 58
Building required indexes for ACCESS_GRP_TBL
SQL Error. Error Position: 0 Return: -2300 - A table or view could not be found (SQLSTATE PS601)
RUN STATISTICS FOR TABLE (PS_ACCESS_GRP_TBL,LOW)
Error: SQL execute error for %UpdateStats(PS_ACCESS_GRP_TBL)
Error: Import Record name ACCESS_GRP_TBL
SQL Spaces: 0 Tables: 1 Triggers: 0 Indexes: 1 Views: 0
Ended: Wed Feb 27 03:17:14 2013
Unsuccessful completion

Error while executing the compilation process

Hi,
ISA Framework: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: javac: invalid flag: "/usr/sap/CJP/J06/j2ee/cluster/server2/apps/sap.com/crm~isauseradm/servlet_jsp/isauseradm/work/jsp_login XXXXXXXXXXX.java" Usage: javac <options> <source files> where possible options include: -g Generate all debugging info -g:none Generate no debugging info -g:{lines,vars,source} Generate only some debugging info -nowarn Generate no warnings -verbose Output messages about what the compiler is doing -deprecation Output source locations where deprecated APIs are used -classpath <path> Specify where to find user class files -sourcepath <path> Specify where to find input source files -bootclasspath <path> Override location of bootstrap class files -extdirs <dirs> Override location of installed extensions -d <directory> Specify where to place generated class files -encoding <encoding> Specify character encoding used by source files -source <release> Provide source compatibility with specified release -target <release> Generate class files for specific VM version -help Print a synopsis of standard options ].
We get this message periodically then we login to isauseradm-application or shopadmin-application.
How we can solve this issue? Why it's appears in system?
/nwa shows this error:
Process after commit failed - may be hanging internal locks mut be removed manually.
Where I can see hanging internal locks ?
Denis

to add some information,
in runtime workbench, component monitoring, performance monitoring and all other thing except message monitoring is OK.

Error while executing the reversal in KO88 for an internal order

Hi Experts,
I am getting the below error while doing the Actual settlement : order reverse through t code KO88. we are currently using the SAP ECC 5.0 and i found the SAP notes 215944 and 335428, which are upto release 4.6C.
System error - deletion not possible
Message no. AAPO186
i can see that the doc has generated for the settlement and for reversal it is giving the error. Can some one help me who has faced this type of problem earlier.
Thanks & Regards,
Venkat

Hi,
Additionally, try to check 300273 note.
Regards,
Eli

Error while resetting the PO release using the FM BAPI_PO_RESET_RELEASE

Similar Messages

Maybe you are looking for