Error while running a EAR in SAP EP

Hi Gurus,
I have a EAR file (project) which I am able to successfully deploy through SDM in EnterPrise Portal. Now, When I shoot the URL for that EAR. Its giving the Following Error.
com.sun.rave.web.ui.app base.Application Exception: null
I googled about this problem but their is no Answer to this,
Thanks in Advance
Somil

Sounds like you're missing a library at run time. What is com.sun.rave? You may want to ask in one of the Java developer forums as I don't think this is a portal question...

Similar Messages

Getting error while running crystal reports on SAP BW Query

Hi
I have installed Crystal Reports 2008 SP3 and then SAP Integration Kit. I'm able to connect to SAP BW but after adding the query to crystal and while refreshing the report i'm getting an error
Database Connection Error: 'BAPI Error #:0' Error occured when starting the parser: timeout during allocate/CPIC-CALL:'ThSAPCMRCV'.
Please help how to overcome this error.
Thanks
Raghavendra.G

Check the following SAP note
https://service.sap.com/sap/support/notes/1032461
Regards,
Stratos

Error while running DTW in SAP Business One 9.0

Dear All,
Error while running DTW the error shows that in SAP Business One 9.0 & PL 08 the 'Unable to access SBO-Common Database' & attached the screen shot for the same.
Kindly guide for the same
Thanks&Regards
Umesh Vaidya

Hi Umesh...
check with these links
http://scn.sap.com/thread/3164843\
-111 Cannot access sbo-common database
Unable to access SBO-Common database
865191- DTW Troubleshooting Guide
Hope Helpful
Regards
Kennedy

Error While Deploying the Ear .

HI ,
I am getting an error while deploying my ear through Deploy Tool . the ear get loaded but fails to deploy... the error message i got is pasted below...
It gives error about EJBContainer, but the J2EE Engine's Visual Admin shows the service is runing
Any help is highly appreaciated
Eror Message.....
06/05/13 18:49:09 - ***********************************************************
06/05/13 18:49:10 - Start updating EAR file...
06/05/13 18:49:10 - start-up mode is lazy
06/05/13 18:49:12 - EAR file updated successfully for 2078ms.
06/05/13 18:49:12 - Start deploying ...
06/05/13 18:49:14 - EAR file uploaded to server for 1172ms.
06/05/13 18:49:16 - ERROR: Not deployed. Deploy Service returned ERROR:
 java.rmi.RemoteException: Cannot deploy application sap.com/omnidocs_ejb..
 Reason: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.; nested exception is:
 com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
 at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
 Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/omnidocs_ejb in container EJBContainer.
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:621)
 at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:319)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:539)
 ... 10 more
 Caused by: java.lang.NoClassDefFoundError: com/newgen/omni/jts/txn/NGOServerInterface
Loader Info -
 ClassLoader name: [Deployment:Runtime:sap.com/omnidocs_ejb]
 Parent loader name: [Frame ClassLoader]
 References:
 common:service:http;service:servlet_jsp
 service:ejb
 common:service:iiop;service:naming;service:p4;service:ts
 service:jmsconnector
 library:jsse
 library:servlet
 common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
 library:ejb20
 library:j2eeca
 library:jms
 library:opensql
 common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
 interface:resourcecontext_api
 interface:webservices
 interface:cross
 interface:ejbserialization
 Resources:
 C:\usr\sap\J2E\JC00\j2ee\cluster\server0\temp\deploy\1147526354539
 C:\usr\sap\J2E\JC00\j2ee\cluster\server0\temp\deploy\1147526354539\omnidocs_ejb.jar
 Loading model: {parent,references,local}
 The error occurred while trying to load "com.newgen.omni.jts.txn.oracle.docdb.NGOConnectCabinet".
 at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
 at com.sap.engine.services.ejb.deploy.verifier.CheckUtils.loadClass(CheckUtils.java:25)
 at com.sap.engine.services.ejb.deploy.verifier.session.SessionBeanCheck.check(SessionBeanCheck.java:42)
 at com.sap.engine.services.ejb.deploy.verifier.Verifier.checkBean(Verifier.java:82)
 at com.sap.engine.services.ejb.deploy.verifier.Verifier.check(Verifier.java:46)
 at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:253)
 at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2144)
 at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
 ... 16 more
 For detailed information see the log file of the Deploy Service.
06/05/13 18:49:16 - ***********************************************************


Hi
I would suggest you to do the deployment of the EAR using NWDS rather that using deploy tool. for Doing this please follow this link for creating ,building and deplopying as ear using dev studio
http://help.sap.com/saphelp_nw04/helpdata/en/08/51ec41b9a24f4a8359c61ae4a02db1/frameset.htm
Anyways if you ar still tied up using deploy tool pleas cross verify that all the dependent jars (including jars which NgoServerinterface will beusing internally has to be in the classpath . Would be great if you can post the stack trace
hope this helps ! please mark points for helpful answers .
regards
rajeshkr

Error while running a report

Hi all,
I am getting this particular error while running a report. The error is:
SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 
Could anyone tell me what that means?
Thanks In advance,
Raj

Hi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh

Error while running tcode wwy1 in r/3

Hello,
I am beginner for Internet Transaction Server (ITS).
while running tcode wwy1 in SAP R/3, ther is an ABAP runtime error as below.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"USER_COMMAND_0100" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the function "BAPI_EMPLOYEE_GETDATA" the STRUCTURE parameter "PERSONAL_DATA"
is typed in such a way
that actual parameters are not valid, unless they are compatible
according to the Unicode fragment view.
But when I run test for function "BAPI_EMPLOYEE_GETDATA", it display the result.
Can anyone have a clue ?
Thanks in regards.
Minaxi shah

Hello,
I get the answer. In program personal_data is associated with bapip0002 structure.
where as in function personal_data is associated with BAPIP0002B. and the structure of BAPIP0002 is differ to BAPIP0002B.
minaxi shah

Getting error while running sapinst.exe

Hi Gurus,
I have an error while running sapinst.exe.
===============================
Error: Home directory is not available for user sapsdt
Opened sylib722.dll
exe dir is I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818
MessageLib initialized successfully.
Creating file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
Removed file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
Initialized SAP kernel tracing to file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel
Opened I:\usr\sap\PD3\tmp\3\sapinst_exe.10440.1359197818/iaguieng722.dll
Initialized SAP kernel tracing to file dev_sap_kernel
receiving and sending on port 21200
existence check for user PD3ADM returned true.
inserted account (***ADM, S-1-5-21-2072974133-1425365782-667646791-181569, USER) into the accountcache.
Account sapsdt has ADS path 'WinNT://US5885SPAD/sapsdt'
existence check for user sapsdt returned true.
inserted account (sapsdt, S-1-5-21-1572296251-1555274763-1146236042-1004, USER) into the accountcache.
Password set for account sapsdt.
Environment variable SAPINST_JRE_HOME set to value 'I:/usr/sap/***/tmp/3/sapinst_exe.10440.1359197818/jre'.
System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'ATL::CRegKey::Open' with parameter (hKeyParent, SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-1572296251-1555274763-1146236042-1004, 0x20019), line (95) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp), stack trace: sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
Exception thrown near line 95 in file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
Stack trace:
sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
At line 95 file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
Call stack:
sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
======================================
can someone please help me out for error.
Thanks in advance

check user profile in AD, add a path in the user profile Home folder directory of user SAPSDT, restart sapinst.

Error while running Deferral for August month in RERX module

Hi Form,
Can any body help me as I am getting error while running Deferral run for August month. Error Description is
"Accrual subobject IS10000000001000057/4BC487BDCA9200E8E1008000AC10025F not found"
We had already taken advance rent for the customer and Deferral is running fine till July month but in August month this error is coming.
Please help me out.
Thanks & Regards,
Shailendra Tyagi

Hi Shailendra,
please check the SAP note 1263230 and the mentioned report Z_REFX_CORRECT_ACEHEADER.
This should help to solve the reported issue.
Regards,
Christian

ERROR while running attribute change run.

hi sap xperts,
I got an error while running the attribute change run in a process chain.
At first i got an error "The action is locked by a change run"
SO I DID THE FOLLOWING STEPS.
1.RUN ATTRIB CHANGE RUN MANUALLY IT RUN SUCCESSFULLY,but the process chain is still red.
Q1.Is there any way to link the manually run attrib chnage to process chain so that the process chain becomes Green?
2.SM12 - realease the locks and right click the pc and repeat.It didn't work
Q1.While removing the locks what should we remove,bcoz i removed all the locks?
3.I again removed the lock and repeat the process but still i didn't work.Now its chowing "SQL ERROR OCCURED WHILE ACCESSING"
So the Process chain got stuck,Can any body help me to run the attrib chnage run.
If possible can anybody send the Process chain monitoring documents to my email id:
<email ID removed>
please.thanks in advance,i know how to say thanks in sdn.

At any point in time only one attribute change run can run in the system. The other ACR's will fail due to locks. In your case, to set the process chain to green, try the following steps.
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
The above steps will help you continue with the rest of the process chain (thus avoiding manual runs) but the failed step might still remain red. Hope this helps.

Error While running crystal report

Dear All,
i have some crystal reports in SAP.while opening any crystal report its through some error like "Error While running crystal report ".
Kindly suggested me how to do this .
Thanks&Regards,
P.Pratap

Hi All,
Thanks for your reply,
already i close this Issue.
they have one addon for crysatl report .so it show error like Error while Running crystal report
thanks&Reagrds,
P.Pratap

Dump error while running termination action

I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors         SYNTAX_ERROR
Date and Time          21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
     Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
      include "LCACS_BU_PARTNERU44 " in
     line 19:
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
     "r such tables in a Unicode context."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     The following syntax error was found in the program SAPLCACS_BU_PARTNER :
     "The key of internal table "LT_BUT0BK" contains components of type "X" "
     "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program                                 SAPLBUD_CHECK
Include                                 LBUD_CHECKF01
Row                                     1.129
Module type                             (FORM)
Module Name                             RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1   CALL FUNCTION 'BDT_TBZ1F_GET'
2     EXPORTING
3       iv_objcn = gc_objcn_bupa
4       iv_objap = gc_objap_bupa
5     TABLES
6       et_tbz1f = lt_tbz1f
7     EXCEPTIONS
8       not_found = 1
9       OTHERS    = 2.
0   READ TABLE lt_tbz1f INDEX 1.
1   IF sy-subrc = 0.
2     CALL FUNCTION 'BUP_PARTNER_GET'
3       EXPORTING
4         i_partner    = is_but100-partner
5         i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS       = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE     ztpkt = 'RLDEL'
             AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner        = is_but100-partner
i_partnerguid    = ls_but000_int-partner_guid
i_role           = is_but100-rltyp
i_dfval          = is_but100-dfval
i_calltp         = iv_calltp
i_valid_from     = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to       = is_but100-valid_to_dats
i_valid_to_old   = iv_valid_to_old
PORTING
e_result         = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result.                          "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -

HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik.

RFC ERROR while running BI Process Chain

I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
Thanks

This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

Error while running Flights example

Hi,
I have successfully deployed the Flights example. During running, I got the following error:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type extern:com.sap.test.flights.model.types.FlightsModel:com.sap.test.flights.model.types.Bapisfldst could not be loaded: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection: com.sap.sldserv.exception.SldServiceRuntimeException: Failed to create CIM client.
Please let me know how to resolve this. Thanks.
Regards,
Woei Tyng

Hi Woei Tyng,
Web Dynpro uses the System Landscape Directory (SLD) to get the metadata for JCO connection creation. The necessary configuration steps are described in the tutorial documentation of the <a href="https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?page=TutWD5_BAPI.htm">Web Dynpro BAPI tutorial</a>
Hope that helps.
Regards
Stefan

Error while running a Java Program

Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)

Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards

Error While Running a page on JDeveloper

Hi All ,
I am getting the following error while running a page in Jdeveloper . Can any body help me?
(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier ; (Could not lookup message because there is no database connection) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862) at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ## Detail 0 ## java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289) at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583) at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983) at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141) at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2487) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2854) at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:622) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:550) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1328) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getMultiSpecificProfileFromDB(ExtendedProfileStore.java:368) at oracle.apps.fnd.common.WebAppsContext.setProfileValues(WebAppsContext.java:4177) at oracle.apps.fnd.common.AppsContext.setDBEnv(AppsContext.java:3407) at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2508) at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2398) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2257) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2072) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1976) at oracle.apps.fnd.profiles.Profiles.getConnection(Profiles.java:2494) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1304) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827) at oracle.apps.fnd.common.AppsContext.(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ">

check your DBC file, we have discussed this issue in the forum, search for SERVERRESP_ENABLED_FLAG

Error while running a EAR in SAP EP

Similar Messages

Maybe you are looking for